My DIY CNC Router build with ATC and Vacuum Table

Рет қаралды 165,993

5 жыл бұрын

This is how I built my new CNC Router with ATC (Automatic Tool Change) and Vacuum Table.
Usable size : 1000x1400mm
ISO20 / ER16 tool holder
Rack with 15 tools
2.2kW water-cooled ATC Spindle (JGL-80/2.2R30-20) / 30000 RPM max
2.5kW Side Channel blower for vacuum.
3 layers MDF vacuum table.
And here you can see it in action milling aluminium :
• DIY CNC Router with Au...
LinuxCNC configuration files:
github.com/yannpom/ouimill2

Пікірлер: 390

@matiasgoinheix366 4 жыл бұрын

The best build I've seen so far

@Dr.Stein99 5 жыл бұрын

JGL spindle sounds solid. Nice work.

@danielminskey 5 жыл бұрын

Beautiful Biuld. Amazing job. Love the ATC

@robertconklin3322 5 жыл бұрын

Thank you for sharing that Yann, well done. Keep us updated please! -Rob

@martynsummers6858 4 жыл бұрын

Yann - really appreciate the effort you put in to this project and the fact that yu share your experience, particularly for all us CNC newbies. excellent piece of equipment.

@frasermacdonald5760 4 жыл бұрын

Hi Yann, Thanks for sharing your fantastic machine with us. Like all of the rest of your fans, I would really appreciate some more detail. If you had some plans then thats great, but even if you only had a parts list and details of where you sourced the key elements that make your machine so special, we would really appreciate your help. Best Regards Fraser

@owensparks5013 5 жыл бұрын

Great build, thanks for making the video explaining it. Cheers, Owen.

@Powdermonkey99 5 жыл бұрын

Yann, we need more video's from you.....Please and Thank you!

@dittagecoeco2738 5 жыл бұрын

I am amazed from such a wonder! Great work, so inspiring! Yann, thanks for sharing it

@magran17 5 жыл бұрын

My highest respect for the quality of this work. Hello from Victoria, BC, Canada. 🇨🇦

@YannPomarede 5 жыл бұрын

Thank you!

@Serbo-Greek 5 жыл бұрын

Woooow! Great machine! Best build I've seen so far!!!!

@perspectivex 4 жыл бұрын

I agree this is a very nice design and build. Check out EndCNC if you want to see another amazing build (in German but you can still see how it's done) kzfaq.info/get/bejne/n8CmY6h40K-Yomw.html

@kevinbacon8716 5 жыл бұрын

After your last video I wanted to build one bad. Now I see that I am not smart enough. That’s an awesome machine and I’m jealous.

@karlmotton4551 23 күн бұрын

Incredible build. Thank you for sharing!

@guysmiley643 5 жыл бұрын

This is incredible. Great job.

@kd_design 5 жыл бұрын

Wow! Great work! Very nice Machine!👌

@J1I9M7M4Y 3 жыл бұрын

Wow, that is a really nice cnc router!

@Thepriest39 5 жыл бұрын

I am jealous. Awesome machine!

@donvanco3078 5 жыл бұрын

Wow - that's awesome for home-brew! I would love to see a parts list for your router set-up! Any plans to offer plans?? ;)

@RORGuitars 2 жыл бұрын

Looks really great! Nice job

@alexwbakker 5 жыл бұрын

More details on the auto probe, ATC setup, etc would be awesome.

@CNCChazz 5 жыл бұрын

Wow that is amazing!

@BivacCamper 5 жыл бұрын

What a job!! Good machine!!!

@BlaiseMibeck 5 жыл бұрын

OpenScad? wow! you are a wizard!

@adriansvideochannel 2 жыл бұрын

Beautiful build man! I'm thinking of building a similar machine myself. I agree with a lot of other people in the comments that a BOM would be absolutely terrific! :) Great job!

@cshepcook 3 жыл бұрын

Clean build!

@brycedavey1252 5 жыл бұрын

Great project

@olivierloynet 5 жыл бұрын

Congratulations to you Yann, I feel that there will soon be a very big machine ;) I loved your 3D presentation to show how your machine was assembled. As I already knew her, I'm not surprised but I still discovered some nice things, like the rails fixed from below which is a good thing so that the slides are not exposed to chips. Bravo à toi Yann, je sens qu'il va y avoir dans peu de temps une très grande machine ;) J'ai adoré ta présentation en 3D pour montrer l'assemblage de ta machine. Comme je la connaissais déjà, je ne suis pas surpris mais j'ai quand même découverts des belles choses, comme les rails fixés par dessous ce qui est une bonne chose pour ne pas que les glissières soient exposés aux copeaux.

@TheDbsharp 5 жыл бұрын

Nice work. I'm really liking the vacuum table setup. I'd love to see more videos on how well the design worked for you and details. I have been thinking the diaphragm vacuum pumps on some industrial water pumps I work with might do very well for the application.

@YannPomarede 5 жыл бұрын

Thanks. Correct me if I'm wrong but I think diaphragm vacuum pumps are high vacuum (close to 0 bar) but low airflow? It could be suited if you want to hold firmly small parts with good sealing, but in the case of a MDF vacuum table with lots of leaks, what's most important is a high airflow to compensate for all the leaks. No?

@MrJackfriday 5 жыл бұрын

This is so beautiful

@artantme 4 жыл бұрын

wow man, that's a beautiful machine

@saltysoulcreations8537 5 жыл бұрын

Fantastic job thanks for sharing.

@DistantVision85 4 жыл бұрын

Such a beautiful machine! Excellent video! I made sure to like and subscribe!

@richardbrown295 5 жыл бұрын

OMG THAT IS AMAZING

@spootdev 4 жыл бұрын

It's a thing of beauty.

@andynichols3464 5 жыл бұрын

Very Impressive!

@daneliberatore4583 3 жыл бұрын

I would like to see the implementation of the probe build and set up in it's own video. Nice set up.

@nathans.509 4 жыл бұрын

Brillian work! Definitely subscribing to your channel!!!

@Gaatech 5 жыл бұрын

Very nice build and very clear video

@pauposts 4 жыл бұрын

Very impressive.

@mase-tech3707 4 жыл бұрын

I like your video so much. I hope to get more anytime soon :D

@forMakers 3 жыл бұрын

It's a great video. Thank you.

@104Tomcat 4 жыл бұрын

LOVE the build! And an old man like me loves the ATC. I would like to buy the plans please.

@minskmade 4 жыл бұрын

great great build

@jean-yvescyb9788 5 жыл бұрын

Superbe ! Bravo !

@lowrider9367 5 жыл бұрын

Nice Vid - Subscribed.

@franz_k6000 5 жыл бұрын

Cool Machine, i have an idea for the next Video: Put some JMC Servos on there they should fit the existing mount and are rated at 180W (depending on the Type) and they are cheap!!

@YannPomarede 5 жыл бұрын

My next one will use servos, stay tuned ;-)

@Basement_CNC Жыл бұрын

i yust have to tell you, thats probably the closest ive seen a diy machine to a datron m8 🔥🔥😍

@derekyesmunt9500 5 жыл бұрын

Great Build! Impressively done, to say the least. I'm inspired and designing a similar system big enough for 4x8 feet pieces. Do you plan to release any more details on this? I have many small questions and I'm sure the community would appreciate a BOM list or something of the sort. Thanks again!

@madmatt1234321 5 жыл бұрын

Wow... Fantastic design. I too would pay for exact plans.

@fosba23 3 жыл бұрын

ecxellent skills amazing

@perw12345 5 жыл бұрын

Damn man, this is beautiful.

@perw12345 5 жыл бұрын

Also, your english is excellent for a frenchman.

@YannPomarede 5 жыл бұрын

Hahaha, thanks. Wherever I go I can never hide that I'm french.

@perw12345 5 жыл бұрын

@@YannPomarede Well, most french people show their nationality by refusing to speak anything but french, your accent just improves the experience. ;)

@PTinvest 2 жыл бұрын

Great work , i want all BOM and PLANS electrical and electronics

@ibizibi 4 жыл бұрын

Do you have any plans to share or sell plans for your CNC? Epic build

@sonnyroy1363 2 жыл бұрын

@Emerson Chaim Instablaster =)

@sonnyroy1363 2 жыл бұрын

@Emerson Chaim no problem =)

@user-gy9hg8tv8b 5 жыл бұрын

It's really good .... Can you explain mor than about the components you use it in this video

@flyingchrisRC 5 жыл бұрын

Nice machine :)

@YannPomarede 5 жыл бұрын

Thanks, I saw yours one year ago with that exact same spindle ;-)

@dave_the_bartender4904 5 жыл бұрын

Probably the best diy build ive seen ! How powerfull is the vaccuum motor ?

@YannPomarede 5 жыл бұрын

The side channel blower used for vacuum has a power of 2.2kW, airflow = 318 m^3/h and pressure = -0.190 bars. Reference GHBH 003 34 1R7.

@OVINNI-POOH 5 жыл бұрын

Beautifully live bourgeois.

@minim5031 4 жыл бұрын

Could you release plans as well as the programming and setup for the atc please? I would buy them to make one myself and I’m sure many others would too.

@user-gy9hg8tv8b 5 жыл бұрын

I want diy cnc like this🤗🤗🤗🤗🤗

@kikijaded90 4 жыл бұрын

Would it be possible for you to show your circuit schematic for this CNC router? Amazing work btw!

@jonasdarley8014 4 жыл бұрын

Really nice machine! Could you maybe share the subroutine files for the tool change? This would be a huge help and highly appreciated! Thx!

@VencaZajicek 4 жыл бұрын

Hi, very nice work man! :) what about machining steel or titan? is your machine rigid enough? Have you been considering polymer concrete for example as the material for your CNC's frame?

@cncfreez 3 жыл бұрын

Nice machine! I'm building a similar machine. The only thing I'm wondering is how is the drive mounted for the z axis? In your video I can't see this. Keep up the good work. 👍

@julianweiser9985 3 жыл бұрын

That ATC is genious.. Be careful with those shavings on the cones though.

@YannPomarede 3 жыл бұрын

Yep that's a great spindle. There is an air-blast (from the inside of the spindle) cleaning the cone just before grabbing it. I had very few occurrences of a shaving being stuck. Especially while cutting aluminium dry, those big shavings get easily blasted away. I have more problems with wood fine dust accumulating on the cone. If the cone is a bit oily it sticks and I have to clean it by hand.

@julianweiser9985 3 жыл бұрын

@@YannPomarede Hmm... Have you thought about a cover from Plexiglass similar to the ones on datron machines? Maybe you could make it so that the cover gets pushed away by the Y-Axis when moving back. That would not require any changes to electronics or pneumatics.

@Djvickers20 5 жыл бұрын

can you make a video of how you made the vacuum table in the software to cut. I would love to know how to do this. I am just new to the cnc world and trying to learn

@matteyles7466 4 жыл бұрын

Awesome Machine, Would it be possible to get any info on the Pneumatic Valves and setup for the ATC, I have the 1.5 Kw version and know idea how to get it going.

@joseantoniosolorzano4993 4 жыл бұрын

Awesome machine, how do you do the automatic squaring of the axes?

@aaroncross2483 5 жыл бұрын

I as well would pay for exact plans for this entire setup.

@Z-add 4 жыл бұрын

there is not a single youtuber willing to sell the plans for the ATC and a proper vacuum table. None of them even explain in detail how to get the ATC pneumatic working.

@henrychan720 4 жыл бұрын

@@Z-add I'm building a vertical mill with ATC right now. I am using a BT30 belt drive spindle cartridge with drawbar and a 2kN pneumatic actuator to release the tools. It's really simple. The tool is held inside the spindle through the pull stud with a big stack of springs. To change the tool, pressure is applied to the pneumatic actuator which compresses the springs and releases the tool. kzfaq.info/get/bejne/odF3hNhzvqurfYE.html

@mhe0815 4 жыл бұрын

@@Z-add Petr Fox explained the Jian Ken JGL-100 spindle in detail in his review, including the pneumatics. May be worth watching if you are interested. He also did an aluminium vacuum table for his CNC made from granite. Impressive stuff.

@jakemestre 4 жыл бұрын

RoboCNC Frees- & Graveerwerk has free plans for his router build. No ATC or vacuum table but still a really solid CNC router. If Yann made plans available I would buy them in a heartbeat. But documentation is usually the least fun part of a build like this.....

@104Tomcat 4 жыл бұрын

@@jakemestre I looked at his website and could not find any plans. Maybe I was having a senior moment but I could sure use some help in the form of a link or something if you don't mind.

@RF-yh3qh 5 жыл бұрын

amazing work.... I would like to build one with tool changer..... are you going to make a video how you did in linux CNC? I'm trying to learn it ... thanks to post these would be great to see an explanation how you plug the Mesa card i just bought 7i76e to start my build.... but no experience putting everything together... would really help if you can take your time to show yours... thanks! regards from Brazil! :P

@xyzxyz6095 5 жыл бұрын

Yann,fantastique ta machine !!! Super vidéo et explications. J'ai visé la même broche pour mon projet, tu est le premier à l'avoir essayé , comment elle marche? Merci pour ta générosité de partage. J'aime bien les autres vidéos aussi. Keep up the great work!!! Salutations de Nice.

@YannPomarede 5 жыл бұрын

Merci :) Elle marche super la broche, j'en suis vraiment content. Sa limite bien sûr c'est peu de couple, donc il faut tourner vite bien l'exploiter. Mais bon quand je dis peu de couple, je fais du slotting 8x5mm dans du PVC rigide à 9000mm/min à 30k RPM. Donc ça va quand même.

@xyzxyz6095 5 жыл бұрын

@@YannPomarede Merci pour la réponse et ta générosité .

@scott1099 3 жыл бұрын

i have been looking at lots of builds for a couple of years now - i think yours is the boss can you post a BOM?

@eezeprint7687 5 жыл бұрын

Wow wow fuckin wow that’s awesome

@ArcticSeaCamel 5 жыл бұрын

Nice machine. How much was the spindle?

@jinvents8448 2 жыл бұрын

Hi Yann, Thank you for the video. I am building my own and there is a ton of helpful information. Could you share where you purchased the Aluminum Extrusion and brackets from?

@koraphatjeenanun7396 4 жыл бұрын

Perfect job. So,I have some quiestion.What's a kind of meterial did you make for a vaccum table?

@elinicfurniture6860 5 жыл бұрын

Very impressive work. Are you running Mach3?

@something2do528 4 ай бұрын

You are the king of home builds! What cfm compressor are you using for you spindle?

@YannPomarede Ай бұрын

I have a 3HP compressor. But it’s mainly for blasting air on the end mill. The spindle use very little air (air seal + tool change)

@kevindflowers234 2 жыл бұрын

Any links to the literature you used to build the ATC and program the tool changes? I'm going to build one but am lost on the nuances of the tool change details. Great build! Very inspiring! What are your toughest tolerances you can hold with this? Thank you.

@jazbojinx 3 жыл бұрын

Awesome machine, im about to build one myself. What did that ATC Spindle cost you? Thanks

@DPTech_workroom 3 жыл бұрын

👍

@HARLYDAVIDZ 4 жыл бұрын

Where did you order your aluminum profiles and allt the rest impotent stuff?? And what cad can software did you use?? Awesome build!!

@mapache_jega 4 жыл бұрын

Donde se puede comprar los perfiles de aluminio? Gracias. Por tu video

@rickygundam 4 жыл бұрын

This is awesome my dude! How much does that ATC spindle cost? Actually, how much does the whole project overall cost?

@YannPomarede 4 жыл бұрын

Around 1.5k€ for the spindle and between 6k and 9k overall. Depending if I count the options and all the tooling.

@TomKraftOwnsThePlace 5 жыл бұрын

Well done, very nice build. One thing to try is to add weight to it (ballast in the gantry) and it will dampen the vibrations. What soft are you running it on ? All the best!

@YannPomarede 5 жыл бұрын

Thanks. I'm not sure adding weight would dampen the vibrations. It would certainly lower the vibration frequency, but as for dampening I would need to use a material that actually absorb vibrations, not just dead weight. I'm running it with LinuxCNC.

@TomKraftOwnsThePlace 5 жыл бұрын

Yann Pomarede: you are correct, you will shift the natural frequencies lower and thus getting rid of the typical buzz accompanying home made CNC machines. I wrote it up in a confusing way. Once again, well done !

@denis213 4 жыл бұрын

Why did you put linear rails under the profile and not on the side? Also want to know what cnc controller software do you use and dimensions of the machine. Thanks

@westminsterstudios7353 4 жыл бұрын

hello, what software did you used for the design of machine, and where did you get the cad files for the parts you used, eg the extrusions and linear rails

@salihbayindir7628 3 жыл бұрын

Hi yann great work . i have a project similar , i couldunt find information about creating post process for the automatic tool change . Can you help me about it ?

@tommays56 5 жыл бұрын

The cad presentation is impressive what our you using and what ball screw as the aluminum machining is really good

@YannPomarede 5 жыл бұрын

Thanks, for the CAD I used OpenSCAD. It's a kind of compiler that build a 3D model from code. You need to be a developper to like it, but then you'll love it! The ballscrews are 16mm diameter 10mm pitch for X and Y, and 5mm pitch for Z. I bought them here: dold-mechatronik.de

@NewEnergy1985 4 жыл бұрын

Have a Look on my first engraving..

@iannorfolk3288 5 жыл бұрын

How are you finding these Chinese spindles. I want one for Hobby use but am concerned about the quality.

@user-ji7vr8gj4x 5 жыл бұрын

Very nice machine! Could you describe what the black material is that you used for the vacuum table? The description says MDF but that doesn't look like the MDF I have seen.

@YannPomarede 5 жыл бұрын

The material's brand is Valchromat. It's a kind of MDF but with more density, more "glue/resin" and a thiner grain. It should be more stable with humidity. It's also more airtight than normal MDF but it's always better to apply glue on the side and bottom.

@TomFYouTube 3 жыл бұрын

Please what bit and spindle speed do you use to cut the black foam spiral at the beginning of the video? Thanks

@micronami 5 жыл бұрын

Very good DIY CNC ROUTER! I Have question for ATC: What's about your Hardware breakout board and CNC software?

@YannPomarede 4 жыл бұрын

Maker Lu LinuxCNC + a Mesa board (7i96)

4 жыл бұрын

Yann Pomarede . that is a relay nice system. do you have any more information of this system you can chare us

@johnstephansen 3 жыл бұрын

hey Yann Thanks for an inspiring video. I'm planning a similar machine. However, it must have a working area of 125 x 250 cm. and could mill in aluminum and wood. Do you have a suggestion for feed, cnc router rack and pinion vs ball screw. If ball screw can be used, what size / type.

@miladinseratlic5984 3 жыл бұрын

That is quite large work area man... You would need EXTREME strong construction to make machine hard for it self not to mention how hard it should be to mill metal. Btw why you need so big machine for aluminum?! What kind of parts should be made with such size?

@SoulShadow 3 жыл бұрын

Hello, I also have a jgl spindle from jianken, could you tell me what frequency inverter you have?

@matteyles7466 4 жыл бұрын

Fantastic build, could you elaborate on your ball screw choices?

@YannPomarede 4 жыл бұрын

Matt Eyles well. I had to choose the diameter and the pitch. I wanted a max linear speed of 9000mm/min. And calculating the critical speed (max rotational speed) of the ballscrew, a 1610 (diameter 16mm pitch 10mm) was perfect (and cheaper than larger ones)

@winsrrow8125 5 жыл бұрын

Podrías hacer un presupuesto de cuanto te costó todo? La verdad es que estoy muy interesado en una fresadora como esa. Pero de la parte mecánica la verdad es qie tengo mas bien 0 idea... I think you understand Spanish, if not, tellme and ill translate it to english. Greetings from spain

@4legdfishman 5 жыл бұрын

Nice build. Thanks for sharing it. Can you give us a link to the ATC spindle? Also, is it 220v single phase? Or 3 phase?

@YannPomarede 5 жыл бұрын

Here is the link: www.jian-ken.com/automatic-pneumatic-tool-change-spindle-motor/jgl-80-1-5kw-2-2kw-2-5kw-24000rpm-40000rpm.html It's a 3 phases / 220 V asynchronous motor. But the VFD takes care of generating the 3 phases at any arbitrary frequency. You only need a single phase in your workshop.