Model is now downloadable on Grabcad you can find it here: grabcad.com/library/epoxy-granite-vertical-cnc-mill-1

This shouldn't even be called home made. I mean, I get that it's literally made at home, but this is more like very advanced in house prototype machine design and fabrication. This is such an amazing build, and you've really raised the bar on just how amazing a "DIY"/"Homemade" project can be. I hope your machine gets lots of jobs!

This is honestly the most beautiful DIY cnc I've ever seen. Holy crap dude good job!

Such an incredible amount of thought into this machine, awesome work

Stef. You’ve got to be quite proud of that build. Kudos to you. I’m looking into the utilization of epoxy-granite to fortify the base of my machine. You’ve given me some great ideas (and inspiration as well).

Well done. This is the best home build I've ever seen. I can't wait to see the machine closed up and running.

That's the most beautiful "home build" CNC I've ever seen. Just incredible.

Stef, that is an extremely impressive build, I cannot wait to see it making chips. Good work.

That's so insanely awesome. Makes my mill look like an elastic band. Great job.

Beautifully engineered. I take my hat off to you

Nice work Stef! Really impressed how fast you managed to build this.

Probably the best diy CNC mill on KZfaq. TOTAL RESPECT.

STEFF, thanks for the new vid. Ultimate design and workmanship. Hopefully more operation vids to come.

This is one of the best builds I even seen! Subscribed!

CONGRATULATIONS FOR THIS FANTASTIC PROJECT !!!!!!!!!!!!!!

I’m very impressed and humbled by what you’ve done, I bought a used Fadal machine and it needed to be disassembled down to the casting, cleaned and rebuilt on the way back together, I’m always complaining because I can’t get my hands on a manual, and you don’t need a manual at all ! My hat is off to you Stef

Wow, Stef absolute stunner!!!! Total admiration, thanks for the inspiration and plans, I am starting to work on my own. God bless.

ive just been sitting here with my eyes wide and my mouth hanging open. this is incredible!

Great work. It's a lot of work to do this and you seem to have done an excellent job making this.

Way to go Stef, what a great build!

Most professional and thoroughly thought out design of any diy cnc machines I have seen, and better than some of the factory made far east machines out there! Now just add tool magazine and covering and its done! Fantastic work!

Stunning build , really impressive on all levels

Nicest DIY cnc I've seen. Wow, Great job!

This is quite impressive. I would love to watch videos on making the base and column molds as well as the actual making of the base and column. It’s nice watching the mold being pulled away from the hardened epoxy to reveal a perfect casting.

One of the best builds I've seen. Too many people waste money buying thicker aluminum plates, with no understanding of second moment of area (or the fact that steel is 3x stiffer to begin with). Nice work.

What a spectacular machine, very good job you did there!!

Awesome build Buddy! Thanks so much for sharing! You are doing a great job!!! 👍

Good video and thanks for the inspiration. Currently learning Siemens NX and the project i chose to begin with designing is my own take on a serious mill for small businesses and hobbyists that has a fully cast iron machine base and hopefully will cost less than a Tormach. This video gave me some good inspiration for that project

thats an awesome build. never seen anything like that . also good learning moments. keep it up

Very cool build. Impressive work.

Amazing machine. And your lab looks very interesting.

As a toolmaker, this looks daunting af xD incredible work man

Now that's really inspiring! Monumental work

Damn... Thats a monster. Awesome build

I'm so touched by your achievement, thank you Sir

Brilliant piece of machinery. Top work.

Really nice build!👌 can’t wait to see it making chips!

This is an awesome mill! Good job!

Very very nice! That looks incredible!

Wow that's an amazing project. Great job and nice video.

This is amazing, one hell of a spindel servo!!

Let me tell you this job is amazing. All my recognition for you.

I love you! 😉 Truly a work of engineering beauty, I'm sure you are very proud of this awesome machine.

My favorite part of the whole thing: 3:40 hahaha. Absolute beast of a build, actually (aka not figuratively) inspirational work man!

They Best job i can see on KZfaq , congratulations 👍👍👏👏👏👏👏

Awesome build, it's gorgeous!!

Man, you are amazing! Thanks for sharring so much info.

Amazing work. I know how much energy it takes to pull this off. Awesome. With the power on that machine get your enclosure up ASAP your chips will fly off like shrapnel lol

Very cool, I love it. Excellent job, and thanks for sharing 👍🏼

Beautiful machine. Thanks for sharing this video Sefan.

Superb Build..hats off to your skill...Kudos to you

you made a beauty and lot's of well designed aspects in it.

Wow, excellent work. I'm impressed 😮🤓

wow!!! GREAT DIY CNC ... what an incredible skill ! i salute you ...

Absolutely incredible. NIce work!

Wow great job! I'm jealous of your skill in designing this. One thing to be aware of is if you test that vertical servo brake while the load is moving, the brake surface will glaze and make it much less effective. They are designed to be static holding brakes only.

Very impressive work! Wow!

Thanks for showing this impressive work Stef! Someday I hope to do something similar, though I'll probably go a bit smaller. I look forward to seeing how the tool changer works out. It's awesome to see someone building professional quality in such a small infrastructure, it really shows what's possible for those willing to put in thought, time, and not a little bit of money.

absolutely awesome job! congratulation!

Very nice! I look forward to see what you do flood coolant etc!

Very good workmanship.

Bravo!!! Beautiful build. More videos please.

Impressive build young man.

Epic build! I can't wait to see it break some chips.

Goed gedaan Stef. Voorwaar indrukwekkend

Congratulations, fantastic achievement.

Wat een mooi project complimenten! Ik denk dat er best wel wat interesse is als je tegen een vergoeding tekeningen en specificaties kunt leveren.

It looks beautiful!

Very impressive build, subscribed! I hope you will make a video about applying the epoxy after all the adjustments are done.

Wonderful project. Thanks for sharing it.

Like the build??? That is the most impressive home made CNC machine that I've seen. Any plans about writing a book about CNC building?

Amazing machine. Very well done! How will you get the epoxy in there? What epoxy and/or filler will you use?

Wow, great inspiration. !! Now i want to build one once i have the money set aside. Make sure you build some way covers.

That's seriously one of the best diy machines I've seen. Those 30 dislikes have to be from overly jealous people. I'll now go to play with my MPCNC and leave you big boys alone :D

Wish u the best , werry nice build , and a looooootttt of work . I like the cleaness of work and i wait for it to scream in steel full engage

Very impressive build!

Just one word: amazing.

That is impressive. Nice job!

That is a beautiful creation.

Very nice job. Pressed to see the first chips.

Congratulations and well done.

Very nicely done!! Would be interested to know the squareness, straightness, flatness and repeatability of the machine. Very impressive accomplishment Stef, thanks for sharing... Enjoy your machine!

Beautiful CNC machine. 👍👍👍

beautiful machine, good job

Awesome, incredible, Bravo to you Sir

Very nice and solid machine 👍

Fantastic Work, My hats off to you. Well Done. : )

Looks really professional

quite a scale and approach, will be interesting to see first chips

This is a sweet build!

beautiful machine and well explained

Exceptional on many levels and nicely sized for the limited available space. I suspect that there will be more spindle engineering and development in the future. It will be fun to watch you explorer and innovate solutions. Sadly, added rigidity, precision and speed translates into $$$$$$. But in the meantime, button the thing up and sling some chips. 😁

Very well done!!! A little advice about the Spindle if you allow me, always warm up step by step (10%-30%-50%-70%-90%) 10 minutes each step from a completely cold spindle or your bearings will last no time... start the spindle at 6000 rpm is not recommended. Other than that Amazing Job!!!

One of the most sick homebrew CNC's I have ever seen. Same thing could have worked for 3x bigger table easy and still be an overkill. That is 3x longer and 3x wider bed so 9x bigger table.

Amazing work!

When I grow up I want to be like this guy.

looks so good i love it :)

Nice job. Very good looking machine. Should make nice parts.

Absolutely Gorgeous !

26 thumbs down? WTF do they have or have built? Great work!