My DIY Mobile DJ Booth for $50.62 US

Рет қаралды 235,801

15 жыл бұрын

So I ran out of time & money actually to order a DJSkirts.com MobilePro Boooth that I saw demo'ed in one of Brian's video and I really wanted to clean up my kit before my first gig in 15 years... What to do?
Since I enjoy doing some "engineering", I decided to spend a few moments at my local HomeDepot and here is what I came up with.
My DIY Mobile DJ booth worked like a charm at the gig yesterday. I stored it in an unused speaker stand carrying case.
BTW, I used black textured spray paint for plastic, which I forgot to mention in the video. I didn't include it in the cost, since I already had it on the shelf in my workshop.
To see BrianSRedd's video on the DJSkirt review: • Clean Up Your Mobile S...

Пікірлер: 89

@TehillahMusic 15 жыл бұрын

Yes I sprayed both the PVC and the iron pipe with Rustoleum Plastic Textured paint that I had on the shelf. The texture gives the pipes a little grip for the back crushed velvet material as well as helping to assemble and take apart.

@CrystalClearDJsNYC 15 жыл бұрын

I picked everything up. I'm just making one adjustment. I'm setting it up to be either a four foot or 6 foot facade. I'll put up a video when I'm done.

@JugglerLou 3 жыл бұрын

I’m interested in the six foot set up. I want to make a screen for a standard 6’ table with a 4’ high screen to give me a large open top box to place props into for my show. The client provides the table (or I have one) and I bring the screen and props.

@dmediamond 14 жыл бұрын

Ya know... this is the best idea. I've thought of building my own nearly a year ago and purchased one. Guess what... it's broken. I watched your video and built my own. Placed lighting bars behind the fabric and the party begun.. Thanks a million for the idea on pvc piping. Peace. DJ Knock (Washington, D.C.)

@sirparkerdon9240 8 жыл бұрын

Thank you I really appreciate your knowledge life saver. We need more guys like you

@jvnmrles 11 жыл бұрын

WOW.... That's great, might do one soon, thanks for all the help.....

@bpmdjpro 15 жыл бұрын

Nice, thanks for the idea! Your dog digging in the bag was cracking me up!

@TehillahMusic 15 жыл бұрын

Correct, I needed the facade in 3 days. My favorite DJ stores, could not guarantee it would arrive by the gig. That lead me to think how I could get one in 3 days, which lead me to wonder how to build one.

@TehillahMusic 12 жыл бұрын

As I mentioned before, the issue I had by using all PVC, was that it wasn't as stable as using the iron pipe in the corners. However if that works better for you and your willing to share your build video thats fantastic!

@CrystalClearDJsNYC 15 жыл бұрын

Thanks for the great video. The iron pide is a great Idea. I'm going to build one also. Thanks for sharing.

@itsj1train 15 жыл бұрын

Love the do it your self stuff,and it looks good! Good Job! Keep it up

@zamonajay 9 жыл бұрын

that is so artistic for that quick handy cover

@TehillahMusic 15 жыл бұрын

Yep, I thought about that as well... however I never use a 2m table. So I just kept it at 1.3m wide.

@MaShandToSh 12 жыл бұрын

Great design. However, I would cut the two center pipes down the center, attach a t joint to the bottom and top and insert an iron pipe down the center (connecting to the two t joints. This though slightly more in cost would prove to be a very durable and strong stand no matter where the individual leans.

@TehillahMusic 14 жыл бұрын

@terrorvis Correct, when I decided I wanted one, I had a gig in a few days later... so I didn't have time to order it and get it in time.

@djboentertainment 14 жыл бұрын

This is a very good idea... I really like this... Thanks for sharing! ~DJ Bo~

@jubes567 14 жыл бұрын

great job looks amazing!

@TehillahMusic 12 жыл бұрын

Thats a great idea, and an easy mod!

@johnnych1ngas 13 жыл бұрын

very creative...thanks for the ideas

@TehillahMusic 14 жыл бұрын

Just tried it, amazing if you put 2 color splash Jrs behind it. But don't turn on the lights till you lights go down and the party really begins.

@Bossmanbossley 15 жыл бұрын

nice video, i think im gonna go down this route, much cheaper and probably feels better to have accomplished such a good booth! Great stuff!

@TehillahMusic 12 жыл бұрын

I use a 4 ft wide, by 20 inch deep folding table that has legs that extends the surface up to 4ft... I'm rather tall.

@stewardsproductions 14 жыл бұрын

thanks for posting this video

@exzcalibur 14 жыл бұрын

Thank you for sharing...

@snowvalleyrat 8 жыл бұрын

Thanks so Much!

@mrdjprotoj 14 жыл бұрын

awesome job!!!!

@1775sw 12 жыл бұрын

@officialDJFresh he said a 4 ft table that was 20 inches im guessing he means 4 ft long from side to side by 20 inches from front to back. To adjust the measurements of this you would just have to change the measurements of the pipes to fit your needs.

@djscottdog1 13 жыл бұрын

that is a really good solution

@RochesterHeroinDealer 15 жыл бұрын

looks nice

@PappasProductionz 14 жыл бұрын

This is nice.. im gonna use this if you don't mind

@steve702 13 жыл бұрын

I would have to say that is a pretty nifty o some idea compared to some of the prices for for stands and tables. i paid 200 for my odyssey fold out table and didn't even get to use it yet and it warped on me already only had it for about two months now...

@Phen0mable 11 жыл бұрын

Very professional

@TehillahMusic 14 жыл бұрын

Correct, when I decided I wanted one, I had a gig in a few days later... so I didn't have time to order it and get it in time.

@salfirebird92 15 жыл бұрын

hey thx for the idea i just buld one thx for sharing

@joesautosocal 13 жыл бұрын

looks sick i might make one b4 my gig tomorrow to give a more pro look to my setup can you take down and rebuild at a gig

@coolmjr 15 жыл бұрын

Love it. Very Nice...

@TehillahMusic 15 жыл бұрын

Cool beans...So post a vid of it!

@DBKlain 11 жыл бұрын

Did you paint the pvc black? Will the paint stick to the pvc and hold?

@JamieToal 12 жыл бұрын

nice one man!

@tonewjersey 13 жыл бұрын

Since pvc pipe is white, what about the cost and labor to paint it black

@MrSerpent89 13 жыл бұрын

hey wats up, did you have to sand and primer the platic PVC and then use the textured platic paint?im asking because i want to paint my melamine wood with plastic paint since melamine is plastic or like plastic?

@ProTeamOtto 9 жыл бұрын

Nobody is going to say anything about the dog burying itself into that bag?

@LUISUPTOMCAT 9 жыл бұрын

I want to say the dog its scratching a turntable before use the dj booth

@triggr74 8 жыл бұрын

had to watch that part twice because I was paying more attention to the dog than him the 1st time, lol

@abo7uson 5 жыл бұрын

poor dog.. hes probably dead now

@clarencemoore2924 8 жыл бұрын

did you add the spay paint???

@djillboy 13 жыл бұрын

Do you rent chairs and tables?

@DjRobArt 12 жыл бұрын

very nice!

@jamesandgrainne 14 жыл бұрын

Hi there, ANYONE , know where I can buy the side out fitting in the UK, it's either known as a different name or it just dont exist this side of the pond ????? Help ,,,they only seem to do the tee and standard elbow and it's making this project tough

@classicautotech 14 жыл бұрын

great work!! i will build one 2nite...

@DJJohnnyJohnson333 13 жыл бұрын

nice job

@terrorvis 14 жыл бұрын

no time to order one? but time to create your own ?

@powerflexprinting3709 9 жыл бұрын

that dog is going to TOWN, LOL great video

@luisaltunah 11 жыл бұрын

Que genial!

@TehillahMusic 15 жыл бұрын

Yes it's my daughters Havanese, Ava.

@InTodaysVideo 9 жыл бұрын

How did you attach the velcro on the cloth/skirt? Did you sew it? Thanks for the great tip!

@goodtymez 7 жыл бұрын

@6:10

@JugglerLou 3 жыл бұрын

If he didn’t use a sewing machine, it’s stick on Velcro. The strong rolls have a 30 lbs hold. Use that to really make sure you don’t have to replace it.

@rottsrool 12 жыл бұрын

Sweet

@AGAVE26 13 жыл бұрын

Can i use one my friends as a helper instead of a dog?

@Joshgiddens 13 жыл бұрын

@terrorvis init you can use pvc pipe :)

@Bossmanbossley 15 жыл бұрын

so i went out today and got my piping, adjoinments and cloth facade all for a grand total of ... (think itll be as much as a probooth?) . . . drum roll . . . . . $16 !! About $40 !!!

@priyonjoni 12 жыл бұрын

4:48 your dog is trying to mate with the bag and have half dog half pvc pipe babies

@BRAVE_dj 10 жыл бұрын

maybe using half inch copper pipe with adaptor instead of iron.....but you got to weld it.....lighter and cheaper

@BRAVE_dj 9 жыл бұрын

+Ken Hollingsworth yes but machined steel 3 feet long nipple are at least more expensive….even if it worth less

@djmarkcotter 14 жыл бұрын

neat

@777chase 12 жыл бұрын

what is that Dog Doing? , is dj Doog Scratching !! XD

@cmullenmusic 5 жыл бұрын

👍🏽

@sillysox13 11 жыл бұрын

do it!!! PM me if u make a vid!

@DJSpinMasterX 12 жыл бұрын

lmao is the dog humping the bag??

@ulsdigital 5 жыл бұрын

Dont know... having more than $ 5000 in equipment vs 50 surface ... ill pass but thank you for your video

@TehillahMusic 14 жыл бұрын

It's not needed for appearance, it could be needed if people lean on it.

@SinLambda 12 жыл бұрын

lol haha your pooch at 5:00

@djfixxx 12 жыл бұрын

Personally I've never saw the need for anything like that. Anything that can fall and hit a client or there guests is a law suit waiting to happen. I book a gig, they supply a table. I put my coffin on it, 2 Wireless Mackie 450's out and I'm done.

@iceman977th 13 жыл бұрын

You must have used expensive stuff. 1/2" PVC + Hobby Lobby black cloth = $30 DJ Skirt. Bam.

@pelon25812581 12 жыл бұрын

Whats wrong with that DOG LOL

@TehillahMusic 13 жыл бұрын

@iceman977th 1/2" PVC is not sturdy enough for the rigors of the gig when folks lean over it to make requests, and the cloth I used doesn't show wrinkles. However if it works for you thats awesome.

@7628739 11 жыл бұрын

can I be a dj at 50?

@felip3ruiz 7 жыл бұрын

Mark Can u be a DJ at 18 with your daddy buying all your equipment?

@troyluciano12 15 жыл бұрын

ur dog is a dj? i can c him scratching bak der

@Joshgiddens 13 жыл бұрын

soz you paid $50 for that you should of done it your self with pvc pipe m8t but gd

@g2499867 12 жыл бұрын

wtf is that dog doing???

@TheJohkuPresents 11 жыл бұрын

100th comment!!!!!!!!!

@kanelitwiniec 14 жыл бұрын

ZZZZZZZzzzzzzzzzzz

@MrDJHALO21 12 жыл бұрын

Hey Guys Well Guess What?. . . I built it and this s=dude makes the stuff you need like measurements and stuff complicated no offense to him u need 4 24 inch pvc pipes and 6 4 foot PVC pipes on the 2 extra 4 footers put threaded thingies on them youll find out and i'll post a vid if i get more than 20 comments