My dream bike build, a Pace RC250T retro trials bike...I always wanted one of these!

Рет қаралды 13,455

3 ай бұрын

Is this the most requested bike build I've ever had? I think so, it's certainly been right at the top of my list of dream trials bikes since I was a. teenager!
BIG...HUGE thanks to Peter who got in touch and donated this bike, that's one of the most generous things ever happen to me and my appreciation can't be expressed! I love it and I hope this video has been worth the wait.
I'd love to hear your thoughts.
Cheers!
Ali
Patreon / aliclarkson
Instagram @aliclarkson
Merch: aliclarkson.com/
Paypal: paypal.me/AliClarksonGB?local...
Pivot Cycles global.pivotcycles.com/produc...
Saddleback saddleback.co.uk
Troy Lee Designs troyleedesigns.co.uk
Inspired bikes www.inspiredbicycles.com
Pinnd Components www.pinnd.co.uk
Schwalbe Tyres www.schwalbe.com/en/start
Hayes Brakes hayesbicycle.com

Пікірлер: 178

@snokefilmmedia 3 ай бұрын

Another banger video that checks all the boxes: ✅ The cute thief ✅ A bike ✅ Fantastic humor ✅ Lots of vintage bike trivia ✅ Handlebar toots ✅ Well disguised double entendres ✅ Backyard tricks Cheers and thank you!

@Ali_Clarkson 3 ай бұрын

Thanks dude!!

@TimInertiatic 3 ай бұрын

The x-lite fly stem and azonic bars has got to be the setup.

@Ali_Clarkson 2 ай бұрын

It’s a tough call!

@InitialP_Photography 3 ай бұрын

Nooo, the X-Lite stem was perfect. Send it my way if it's spare ;)

@Ali_Clarkson 3 ай бұрын

I’m sure the Brisa stem will snap soon so maybe I’ll keep hold of the x-lite for when it does 😋

@ceke 2 ай бұрын

The x-lite looked best, with the recesses matching the frame design, and the black matching the forks

@SuperRiderTV 3 ай бұрын

No way, Brisa! Nice find! 🙌

@Ali_Clarkson 3 ай бұрын

Yeah I was stoked to get that in the box!

@bengray5013 3 ай бұрын

So many good memories of those retro parts 🤩

@benpc1794 3 ай бұрын

Needs a filthy 'ard guard and maybe a dcd to top it off perfectly 👍

@Ali_Clarkson 3 ай бұрын

Sadly the cute thief was hunting for an Ard Guard but they proved too elusive :( potentially a good call on the DCD, I might even have one somewhere

@benpc1794 3 ай бұрын

@@Ali_Clarkson they do appear to be as rare as rocking horse shit! Wayne Walton, mark lowles or one of the other hoarders probably have a full colour run of them! 😂

@YanDoroshenko 2 ай бұрын

Those square profile tubes look out of this world.

@benm8605 3 ай бұрын

Love the build! +1 for adding the race face stem / azonic bar combo back on, but that's just me... and bc this looks so similar to my old 2001 hardtail Balfa in bright red. I ran the same kujo but on the front. Avid mech discs.. bb7s? which are still awesome today Would've loved some of those cranks back then. Broke so many square taper cranks.. Remember once I switched to splined "is*s" style haha.. it made a difference. cheers mate

@Ali_Clarkson 2 ай бұрын

Yeah I agree, the RF stem and Azonic bars did look very cool!

@bengray5013 3 ай бұрын

Rohloff trials chains were always the way to go back then, but yeah definitely good choice to go modern with the chain

@Ali_Clarkson 3 ай бұрын

It was a Rolhoff chain that I snapped and hurt myself with 😫

@bengray5013 3 ай бұрын

@@Ali_Clarkson crikey, that's not good!!! Great build btw, it was so cool to see so much retro stuff, it brought back so many good memories 🙌 those were good times

@Ali_Clarkson 3 ай бұрын

@@bengray5013 thanks Ben, glad you liked it 😊

@mpw321 2 ай бұрын

@@Ali_ClarksonDid you join it using the Rohloff Revolver chain tool?

@Kohlwheelz 2 ай бұрын

By far the most legendary trialsbike in the history of trials! So good Ali!🥰

@Metal-Possum 2 ай бұрын

That's an HS22 booster from a 90's model brake. I have a pair of HS22s in that exact grey colour on my 1996 Santa Cruz Heckler. The levers are honking great 3 finger hobbies but you learn to get used to them with just two fingers and careful positioning of your hands.

@Midlifemtb40 2 ай бұрын

Wow almost a perfect replica of mr akriggs bike 😍😍😍😍 the pace was the holy grail back in the day. Then it was the leeson followed by the crescent of jj gregovich

@ortonscustoms2577 3 ай бұрын

Back in the erly 2000s as a teen, i used to do abit of trials,,, not much money tho,,, i had a saracen xray, mini seat,, big old long stem,,, onza cranks,,, the ones with the saw bashring😊 ,,, this build reminds me of that so much

@Ali_Clarkson 2 ай бұрын

Classic 😁

@stevencheah6270 3 ай бұрын

El Gato! LOL… I remb those! 👍🏼👍🏼😂

@Ali_Clarkson 3 ай бұрын

Remember all the punctures too? 😂

@willarnold91 2 ай бұрын

I can relate regarding removing the cranks numerous times in a day. A real test of patience 😆

@jasonkroll2735 2 ай бұрын

Nice. And yes,Definitely would take it easy on that masterpiece.

@Ali_Clarkson 2 ай бұрын

Thanks 👍

@beardedpresident564 2 ай бұрын

Great build as ever. Well done 👍

@dansacco1964 2 ай бұрын

Bike industry always convinces us we need new stuff. Nice to see you revisit all these things with the expertise to review them. I ride my 14kg 2002 planet X bike so I can blame my failures on the weight.

@brunaogemeplay2439 3 ай бұрын

20:48 one thing i did when i first swapped my bike to single speed but never seen anyone else do was routing the chain under both pullies instead of the convetional manner, this way it'd be nicely tensioned and wouldn't swing as much since it kinda negates the swing point of the deraileur

@Ali_Clarkson 2 ай бұрын

My only issue with that is reducing the chain wrap around the rear sprocket

@brunaogemeplay2439 2 ай бұрын

@@Ali_Clarkson you do have a point, a chain coming off is never a good thing even if the chances are low 👺

@Ali_Clarkson 2 ай бұрын

@@brunaogemeplay2439 it’s as much just not wanting the chain to skip, with a reduced wrap it can happen though with a bigger 18t it’s less likely than with a smaller one

@brunaogemeplay2439 2 ай бұрын

@@Ali_Clarkson indeed, it's something to take into consideration. Also, i just realized your diy tensioner does just what i mentioned in a more effective and safer way, guess you're really ahead of the game lol

@weedking8357 2 ай бұрын

do love them old skool trials bikes great video

@AquaticBaboon 2 ай бұрын

Man, haven't seen a Kujo tire in ages! Amazed that you found that one in any sort of useable condition, maybe you'll find a Gato at some point

@Ali_Clarkson 2 ай бұрын

I’ll tell CT to keep looking :)

@rathergoodpie 2 ай бұрын

Great job Ali - bike looks like it rides great - especially on the front wheel. LOVE IT ❤

@TimInertiatic 3 ай бұрын

This was my dream bike back in the day

@Ali_Clarkson 2 ай бұрын

So expensive though :(

@southney7211 3 ай бұрын

This was also my dream frame. Still have the same pace trials fork on my old mk1 dmr sidekick up the garage loft.

@Ali_Clarkson 2 ай бұрын

Keep hold of them, they’ll make a nice retirement fund 😂

@nukacookie4755 2 ай бұрын

This is one of the best looking retro trials bikes out there ! I love it 🙂

@jankomaras 2 ай бұрын

I’ve time traveled ❤

@talldarkrandom3170 3 ай бұрын

I had the same setup, but with a Brisa b26 frame and middleburn cranks. Cracked the pace forks in 2 months 🤣. One of the best riding bikes I owned.

@Ali_Clarkson 2 ай бұрын

Nice!!

@UndCon 3 ай бұрын

Very cool, I miss my Pace RC35 fork...

@dimensionsofearth 2 ай бұрын

Love the Granny God and the bike! Those John Tomacs are pretty sweet too. External butting is a little strange although it makes total sense. Looks like a good BB hieght too

@Ali_Clarkson 2 ай бұрын

Cheers, yeah the bb is a decent height, makes a big difference to how it rides :)

@joegatrill6634 2 ай бұрын

Fantastic video! Nostalgic feelings from these parts. I have a lot of them in my shed!

@Ali_Clarkson 2 ай бұрын

Glad you enjoyed it!

@oskardigital 3 ай бұрын

Damn ! I have to pass this one to one of our mates ! 😃

@jamesfinlay6652 2 ай бұрын

Always wanted one!! Great build 🎉

@Ali_Clarkson 2 ай бұрын

Thank you :)

@prototypecomponents 3 ай бұрын

Amazing best retro bike build yet! 😍

@Ali_Clarkson 2 ай бұрын

thanks!

@scottgibbs2243 2 ай бұрын

Azonic bar and stem combo and an avid ultimate v brake up front would be the perfect set up in my opinion

@Ali_Clarkson 2 ай бұрын

I do have all those parts so could make it happen 😋

@scottgibbs2243 2 ай бұрын

@@Ali_Clarkson a front V is the old school way

@radtgreen8427 3 ай бұрын

Cute Thief Security Obtaining and protection of bike parts

@ymb9gomez884 2 ай бұрын

Class video ali

@Ali_Clarkson 2 ай бұрын

Thank you :)

@AppsCycleWorks 3 ай бұрын

Love this! That carbon chair is perfect 👌 dream bike for sure.

@Ali_Clarkson 2 ай бұрын

Thank you!

@AppsCycleWorks 2 ай бұрын

@@Ali_Clarkson And I’m sure I have a Brisa bar and stem tucked away somewhere……

@oliverdenford6214 2 ай бұрын

455grams for the rubber DH tube is truly outrageously heavy!!

@YanDoroshenko 2 ай бұрын

You need to make a bagpipe out of a hydration bladder and some handlebars.

@richardwallace9378 3 ай бұрын

Can’t believe the change of fork !?

@Ali_Clarkson 2 ай бұрын

😫

@richardwallace9378 2 ай бұрын

Some later pace frames had really cool sliding dropouts, no need for a mech or tensioner. I’ve still got an old pace 325 with them, it’s setup single speed with the chonkiest azonics stem and a pair of straight carbon tube forks, sadly they are just a pace copy and not the real deal.

@fauliminer 3 ай бұрын

Im getting my new fourplay tmrw!

@Ali_Clarkson 2 ай бұрын

Got it yet?

@fauliminer 2 ай бұрын

Yeah... and it`s amazing. Thanks for inspiring so many people to do this sport. Greetings from southern Germany!@@Ali_Clarkson

@paultomlinson528 3 ай бұрын

Haha such fun... cute theif is a legend

@Ali_Clarkson 2 ай бұрын

Agreed 😸

@YanDoroshenko 2 ай бұрын

Nothing says good design and clever engineering like the need to add a hunk of metal to keep your system from coming apart.

@Emz_Jhaye 3 ай бұрын

Sick build! 😍🚴🔥 and the cute thief/security 😻😻😻

@Ali_Clarkson 2 ай бұрын

Haha thanks :)

@Emz_Jhaye 2 ай бұрын

@@Ali_Clarkson always enjoying your bike build vids! So relaxing to watch! 😊👍 Specialy your rare bikes, never knew this brand names until your vids! Sick bike collections you got there!

@TimInertiatic 3 ай бұрын

That's the joy of radial spoking for you!

@Ali_Clarkson 3 ай бұрын

Sadly yes :(

@Stelios.Posantzis 3 ай бұрын

It's more about looks rather than anything else, isn't it? They could make the hub flanges wider for added strength but they would look really naff...

@Ali_Clarkson 3 ай бұрын

@@Stelios.Posantzis it’s slightly lighter as the spokes are shorter and it makes the wheel stiffer laterally (but weaker vertically)

@Stelios.Posantzis 3 ай бұрын

That sort of rings a bell@@Ali_Clarkson from back when I was reading up about those things a lot. It makes sense. I could never afford one of these straight spoke affairs which back then were all custom lacings and the thought of snapping a hub was frightening enough (mostly for the cost aspect, the thought of breaking my neck obviously came a distant second) to keep me off them.

@mpw321 2 ай бұрын

@@Stelios.PosantzisThey did make a specific radial hub

@draggonhedd 2 ай бұрын

I really adore PACE frames and their forks, they always look so cool. Have you ever played with TPU tubes at all? i heard theyre almost impossible to pinch flat and theyre SUPER lightweight

@Ali_Clarkson 2 ай бұрын

Yes I’ve tried a couple of TPU tubes, both lasted about 20 minutes 😂

@BazFairbrother 3 ай бұрын

Wanted one of these so badly after seeing Akrigg on one at Addingham but they were out of my league back then. Had to make do with a cheap copy that still had square top and down tubes and similar geometry. I used to run the old STX cranks and ran two 22t chain rings back to back with a piece of chain acting as bash on the outer one. Gave it to my nephew when I upgraded to a Saracen team frame. He snapped it long after🙄

@Ali_Clarkson 2 ай бұрын

There’s one of those cheap copies on eBay (or FB marketplace) at the moment if you wanted to relive your youth 😋

@BazFairbrother 2 ай бұрын

Thanks for the tip off but I'll stick with my Echo control for now😁

@oskardigital 3 ай бұрын

I ... kinda like it more then the Hex 😀

@Ali_Clarkson 2 ай бұрын

Haha nothing wrong with that :)

@jamesmincher3435 3 ай бұрын

I'm proud owner of the silver version rc250t

@Ali_Clarkson 3 ай бұрын

Ohhh jealous!

@Stelios.Posantzis 3 ай бұрын

You hit the jackpot! I always wanted a Pace frame with Pace crank-set (or was that a Race Face crank-set?). What a great combination! My preference of course was for the anodised aluminium frames but I have to say the powder-coated red version looks gorgeous! 1:58 What's the big deal? It can be gusseted and re-welded. There's tons of good welders out there. The question is: do bicycle riders know this or do they chuck their broken frames in the recycling bin without checking first? 10:15 Any half-decent machinist can fix that. Shouldn't be that expensive. 11:33 An Alex 24 on a Pace frame with Pace hub! What? Alex 24 were bottom of the pile! Not even Halfords would stock them! 18:35 Middleburns looked ghastly though. I wouldn't use such a set unless everything else on the bike was just as vulgar looking. 21:50 This is the obvious choice.(32:33 agrees) 22:44 If you're that worried about it make a mould of it to have it re-cast if it brakes. Better yet, make a laser scan and have a few spares 3-d printed. 28:03 Are you sure the seat-post alone would not be more comfortable? This looks mega painful! 29:05 I'd be more interested in how much that thing cost. 31:30 You need to place a protector over the vintage NOS Pace chain-stay protector! I know I would. 31:13 You brought back a lot of memories, especially with the Azonic stem and the Tioga not shown. I'm definitely subscribing. Oh, I was already subscribed - never mind. Great skills too! One word of caution though: I would be so worried about being period correct with the tyres and especially the inner tubes. These things deteriorate exponentially with age. The last thing you need on a period bike like this is some serious damage due to a burst inner tube or, worse, tyre wall!

@Ali_Clarkson 3 ай бұрын

The silver ones are mint! I like the red because of again the Trialskings used them :)

@Stelios.Posantzis 3 ай бұрын

I consolidated all my comments into one so that it would look less annoying without realising you had already replied to each one of them @@Ali_Clarkson ! First time this happens to me! Unfortunately, I cannot undo the deletions so I'm not sure which replies corresponded to which comments exactly. I guess you're right about re-welding the frame, it would weaken it without heat treatment which in the case of this painted frame would mean you'd lose the original paintwork. I guess that is one huge downside of aluminium and titanium frames... you gotta to take care of them. Which one of the comments you think I'm dead wrong about? The one about the hub? Or the one about old tyres maybe? For the hubs, reckon, worst case, the machinist would cut off the broken flange on the lathe, remove the metal down to the carbon tube, make a new flange and glue it back on the tube. Easy-peasy. Probably cheaper to buy another hub of course. Alternatively, if you don't want the ultimate strength, the missing bit of the flange could be built up with welding and subsequent machining would give it the original shape. Probably harder than it sounds with dubious results. I'm no machinist by the way. I had never seen a red Pace frame before this video btw. I'm torn now because I always thought that the Pace anodised frames were the coolest. I also did not know they are not as strong as they looked. I always thought that they were the meanest and toughest out there based on their looks alone. Of course back then I could only dream about a Pace frame...

@user-wh2te2kn7l 2 ай бұрын

No way 😳 what dammn😮

@fu-melon86 3 ай бұрын

you can buy IRC tire. mythos XC 2.25 mibro X 2.4 ->my best trial tire!!!

@miamiglia 3 ай бұрын

This hole build made me smile so much oohhh the good old days 👌next you need a rocket pro on the channel 👌

@Ali_Clarkson 3 ай бұрын

😉

@bengray5013 3 ай бұрын

The Rocket Pro was a very cool looking bike, especially with the Pace style forks (I think they were a company called U.S.E) that they sold the whole bike as.... I had a couple of Rocket Pro trials frames, cracked the first one (on the underside of the top tube just behind the brace) and they gave me a replacement. There's just something very cool about Reynolds tubing and Canadian products

@miamiglia 2 ай бұрын

@@bengray5013 you are about the forks the was u.s.e from memory only came in silver !! I had a friend he was sponsored by rocket he was always cracking them as well !! Good times

@bengray5013 2 ай бұрын

@@miamiglia I remember the U.S.E forks in black and silver versions, but by all accounts they were really flexible. I used sunn straight blade trials forks on my original Rocket which I think caused the frame to crack, so on my replacement frame I opted for curved Giant trials forks and had no stress issues with that... my frames were blue, but I always loved the look of the White rocket with the U.S.E forks, it looked so clean and the wrap around logo decals were really smart 🤩

@tonycroft7162 2 ай бұрын

Good job u live for away because we would spend too much time together.

@felixburman5988 3 ай бұрын

great build! i have a set of silver middleburn cranks with a red spyder that would look great on that. also is there a reason for the cut flange on the grips?

@Ali_Clarkson 2 ай бұрын

The cute thief might be paying you a visit then 😂 The grips came like that, it was to give room for shifter paddles

@ZOROASTED 2 ай бұрын

I wonder what that frame would be like built into a rigid dirt jumper with less rake and a different stem.

@Ali_Clarkson 2 ай бұрын

Pretty nervous feeling I’d imagine!

@freetechdk 2 ай бұрын

Have you ever used Planet X BMF rims back in the days?? I remember using those rims on a set of wheels on my old OLD DH rig and they where just monters that would run through anything

@Ali_Clarkson 2 ай бұрын

I was more of a DX32 guy…the cute thief did actually find me a BMF rim and I’m not sure why I didn’t use it

@SeraphXS 2 ай бұрын

those pedals ain't DMR, they're ripoffs made by Wellgo if memory serves :D

@Ali_Clarkson 2 ай бұрын

Suspected as such!

@xyrius 3 ай бұрын

That Mavic X517 rim, and Kool Stop red pads (grinded rims and a lot of tar:D) brought back many memories:) Also do you have a reccommendation for a rear hub (not insanely expensive) similar like shimano silent clutch was, with "instant" engagement?

@Ali_Clarkson 2 ай бұрын

Can’t say I can think of a decent hub sorry, you’re almost asking for an impossible product…if it’s cheap it probably won’t be strong and if it’s silent it also might not be reliable

@peglor 2 ай бұрын

The Shimano silent clutch hubs engaged pretty much instantly but felt so spongy under load that they were very hard to get used to for XC riding, not to mind trials. Box (Formerly Stealth) and Onyx make Sprag Clutch based hubs for sale at the moment (More or less the same thing as a roller clutch), but they're not cheap. The only Shimano roller clutch hub I'm aware of now is the Alfine 11, and it feels noticeably spongy under any kind of power, with 2nd gear being more or less unusable it's so spongy. I love the silent running and low maintenance for commuting though, the 2 kg ish weight it adds to the back axle means bunnyhopping the bike is a challenge.

@rossdewar8365 3 ай бұрын

Was the hope hub made for radial? I have a overside one as made to stop that happening. Great to see my fav hub and rim.

@Ali_Clarkson 2 ай бұрын

No it wasn’t, it was a risky manoeuvre to do it radial and it didn’t work out

@faithhealer3154 2 ай бұрын

🥰

@alimantado373 3 ай бұрын

Pace are they full aluminium and flex a lot when you are on the back wheel? Maybe Im mistaken. I remeber the mech as a tensioner too. Your titanium design is 200% better. Great build.

@Ali_Clarkson 2 ай бұрын

It is full aluminum but Ives such a short small frame I can’t tell if there’s any flex or not, feels pretty stiff to me

@eartharrow6772 3 ай бұрын

Handlebars pointing downward is for those rare areo tuck manoeuvres 🤔

@Ali_Clarkson 2 ай бұрын

Good for limbo comps

@mattgies 2 ай бұрын

That whip pan shot--the manager is a scalpel? Or is the scalpel for the manager?

@Ali_Clarkson 2 ай бұрын

It’s the managers scalpel :)

@tonymighalls9667 2 ай бұрын

Is the seat post from the Dartmoor dj build?

@Ali_Clarkson 2 ай бұрын

No but I can see why you’d think so, that also used a single bolt in-line post

@tonymighalls9667 2 ай бұрын

Good excuse for me to rewatch some of your bike builds then to find out!

@pirate_duck4985 3 ай бұрын

This was so close to my mate Daves bike from BITD! I was gutted when you swapped off the Carbon Fork!! I remember him spending what seemed like unobtainable amounts of money on his Pace way back when! Chris King Hubs, Mavic Rims, HS33's, that exact Seat with a Thomson Post! Race Face Bars, Stem, Cranks, DMR V12 Pedals the Mag/Ti ones & the gnarliest bash guard i think I've ever seen, it was like a circular disc saw from Mad Max 😄

@Ali_Clarkson 2 ай бұрын

Sounds like a class bike!!

@pirate_duck4985 2 ай бұрын

@@Ali_Clarkson Maaaaaate!! Haha. He spent a solid year saving up, getting in contact with companies via his job to see if he could get sneaky shop/staff discounts etc. Pre-ordered the F&F

@captjerski4165 2 ай бұрын

cooling bald spot? who cares awesome build Ali

@Ali_Clarkson 2 ай бұрын

Thanks and thanks ☺️

@darrenhaines2005 3 ай бұрын

@Ali_Clarkson please put on the azonic bars, send me the red stem and I will strip it to silver if it helps

@Ali_Clarkson 2 ай бұрын

Might sell this stem and keep an eye out for a black or silver one instead but thanks for the offer

@sandy_knight 3 ай бұрын

That small hole in the bottom of the BB shell, is that for a crank stopper or just drainage? (I wouldn't have thought crank stoppers are a thing in trials?)

@Ali_Clarkson 2 ай бұрын

Might’ve just been a generic bb shell that has a hole to mount a cable guide, I’ve not had a close look though

@sandy_knight 2 ай бұрын

@@Ali_ClarksonYeah, I forgot about cable routing, the frame has a mech hanger of course so I expect its for that.

@tonymighalls9667 2 ай бұрын

How’s the eye and knee Ali?

@jonbroyles 3 ай бұрын

Headset looked better black.

@Ali_Clarkson 2 ай бұрын

Yeah I know what you mean

@edmundscycles1 3 ай бұрын

in anodized blue was best.

@Ali_Clarkson 3 ай бұрын

Pace frame? I don’t ever remember a blue version!

@edmundscycles1 3 ай бұрын

@@Ali_Clarkson ooooh yes Ltd edition only very few made .

@Nobody-Nowhere 3 ай бұрын

I took a bathroom break and the carbon forks are gone... i highly disapprove this.

@Ali_Clarkson 2 ай бұрын

😂

@rensellvalencia7179 Ай бұрын

it hurts that the bike i currently use is the same geometry as this bike

@yyams 3 ай бұрын

RLM fan eh!

@Ali_Clarkson 3 ай бұрын

You t need to tell me what RLM is before I can confirm 😂

@yyams 3 ай бұрын

@@Ali_Clarkson Ahhh maybe not then... Red Letter Media - I believe they coined the term "memberberries' when referring to all the little 'ohh, I remember that' moments the various recent Star Trek series chucked in for fan service. I may be wrong about 'em coming up with it but that's how I know the word, and the first time I heard it.

@yyams 3 ай бұрын

Ps.. the black CNC stem please:D

@mattgies 2 ай бұрын

@@yyams I thought that term was coined in the South Park episode of the same title.

@yyams 2 ай бұрын

@@mattgies huh, no way.. learn something new every day. Ta for the info.

@younessemagoune1816 2 ай бұрын

🇨🇦👍🇨🇦

@feedbackzaloop 3 ай бұрын

Trying out cat-o diet, huh?

@Ali_Clarkson 3 ай бұрын

So tasty!

@YanDoroshenko 2 ай бұрын

V-brakes on the back of the fork seem like a bad idea. Braking will push them against the bolts that will loosen with vibration and everything will soon explode, instantly killing everyone in the vicinity in a most painful manner indeed.

@YanDoroshenko 2 ай бұрын

Now I realize it's the complete opposite and the front mounted V-brakes should cause nuclear annihilation.

@craigwoodcock8122 2 ай бұрын

*Backwards wheelies

@Ali_Clarkson 2 ай бұрын

Tomatoes tomatoes

@craigwoodcock8122 2 ай бұрын

I’m going to correct you every time I hear it. 😂 You should fit a freecoaster and do some actual backwards manuals. Thank you for making awesome videos for us to watch! 🤘🙌

@Ali_Clarkson 2 ай бұрын

@@craigwoodcock8122 you’ll love the video I made years ago when I tried a prototype Industry Nine freecoaster on my Arcade! I actually did some legit backwards manuals 😂

@shirinaparvin7136 3 ай бұрын

Second❤🎉

@Ali_Clarkson 3 ай бұрын

You sell yourself short, you were first!

@ashleytombs 3 ай бұрын

As rare trials parts are hard to come bye cat stoppers are on the. lookout for. a suspicious looking security guard as several Rare trials parts have vanished Cording to informant Reginald the rat he was last sighted entering a garage in the suburbs of Glasgow That is my funny comment for the week enjoy😂😂

@Ali_Clarkson 2 ай бұрын

😸

@ashleytombs 2 ай бұрын

@@Ali_Clarkson it took me 2h to think of that comment

@Ali_Clarkson 2 ай бұрын

@@ashleytombs well it was appreciated :)

@ashleytombs 2 ай бұрын

@@Ali_Clarkson i’m glad people people appreciate it and enjoy my funny comments it brightens everyone’s day and it brightens my day when people like them