No video
My Experience Building in the Thermaltake Core P3 TG PRO
Рет қаралды 896
Күн бұрынMy Experience Building in the Thermaltake Core P3 TG PRO
Here is the PC Part Picker List:
pcpartpicker.c...
Here is an idea list from Amazon if you're looking to easily consolidate all the parts:
www.amazon.com...
Here are the Amazon affiliate links for all the products in this video (Except the memory and graphics card):
Intel Processor: amzn.to/3QyPJub
MSI Motherboard: amzn.to/3tHsZQD
GSkill Memory (Revised 3600mhz): www.gskill.com...
WD Black NVME: amzn.to/45Okj8z
MSI Graphics Card:
www.msi.com/Gr...
Power Supply: amzn.to/3s8BzHM
Thermaltake Case: amzn.to/3QzZOYM
Arctic Liquid Cooler: amzn.to/3ShH6GB
Arctic Intel LGA 1700 Upgrade Kit: amzn.to/3QyKn37
As an Amazon Associate, I earn from qualifying purchases.
@temptor7585 8 ай бұрын
Really dope case, like u said it can be a case or a test bench. Plus the thermals on it are amazing, since its an open-air chassis.
@NordicNomadv 6 ай бұрын
Hi, i am researching the same system you build, but is it possible flipping the radiator around... so having the tubes at the bottom? Stephen from Gamers Nexus made a video about it: kzfaq.info/get/bejne/eMh3otCnlp-Zo58.html i hope you can give me an answer, maybe it is only possible when using a smaller gpu.
@SystematicHardware 6 ай бұрын
If the aio has the pump built into the cpu block (most of them do).You don't want to have the tubes that connect to the rad lower than the cpu block. Otherwise air bubbles ill rise up into the block and will cause premature pump failure. Some
@NordicNomadv 5 ай бұрын
@@SystematicHardware I know. By the way.., if the CPU temps are fine, you could remove the middle fan from the radiator and mount it to the side and the GPU would fit
AlexComp про компы и железки
Рет қаралды 5 М.
Robeytech Live
Рет қаралды 21 М.
Thermaltake Global
Рет қаралды 51 М.
John Charette
Рет қаралды 12 М.