Oh man that sucks but at the same time thats awesome that the feature actually worked properly!
@LoyalMoses4 ай бұрын
I had some awesome plans for a lot more Mario stuff! 😞 But ultimately I am super impressed and so happy that it saved me from a potential mess!
@pabeta4 ай бұрын
Puncturing an FEP can happen to anyone and almost happened to me before. Good to not gloss over it, good preview!
@LoyalMoses4 ай бұрын
I was so sad not to have another one to keep printing!
@swaslaukinonome4 ай бұрын
My advice to anyone buying a resin printer is also buy an extra vat and extra films if they don't come with it. You will want multiples of those on hand sooner or later, whether for convenience or because you made some little slip up, forgot about the whole exposure to light thing and now your life is scraping meticulously, or etc. It's not like the machine is all broken, you just gotta have some of these things on hand if you don't want an unplanned pause in production.
@LoyalMoses3 ай бұрын
Great advice!
@swaslaukinonome3 ай бұрын
Great video! Thanks!
@tmtjg34 ай бұрын
Impressive size, and the price point is awesome! It might be time to get my first resin printer
@LoyalMoses4 ай бұрын
Heck yeah!
@brianwilcox25434 ай бұрын
Thank you for posting and admitting that you broke it. Now I can prove to my wife that I'm not the only goofball around. :)
@LoyalMoses4 ай бұрын
Haha! Anytime! 😆
@dmhayes64 ай бұрын
Another amazing video. Thanks again Loyal!
@LoyalMoses4 ай бұрын
Thank you!!! 💜
@Phynix0564 ай бұрын
I like it and it look very Tron style.
@LoyalMoses4 ай бұрын
Yes!!!
@DanielChaves1984Ай бұрын
I dont believe it was the AI camera that detected the previously fallen support. It was most likely the load sensor in the arm holding the plate that detected resistance coming down and thus stopped the print.
@LoyalMosesАй бұрын
Yeah, I don't remember - just rewatched it, it may have been a bad edit explaining what happened. We have another video coming after we upgraded the film.
@buildersmark4 ай бұрын
Very sleek, beautiful machine. Glad to see that camera and detection system. I've had a puncture and wish I had this to know about it. Great machine. Look forward to see more of this one. Can I send you the model of the Texas Longhorn to print?
@LoyalMoses4 ай бұрын
Heck yes!!! Send it! Would be cool!
@KoppikCZ4 ай бұрын
I am curious about comparison speeds Elegoo vs. Prusa SL1S with high resolution resins, becouse I have to set the speed down on my SL1S due to surface artefacts and whobi, dobi, the speed is lower than other "standard" printers. So please take a focus on settings the print speeds and high ress resins. in case of rapid prototyping with less detail focus is tilting mechanism superfast. But in case of focus on details I still love my GK2 + ACF
@LoyalMoses4 ай бұрын
Absolutely! I’ll do my best to compare them as evenly and directly as I can!
@3dpathfinder4 ай бұрын
I think Im going to adding this to my resin printing. After the SV08...and the A1 Mini Combo using the 120 credit.
@LoyalMoses4 ай бұрын
Oh wow! You will have a line up of some incredible machines! 🤯
@vorneDabei4 ай бұрын
Watching 1st time one of your vids. Thanks for sharing your fault as this isn usual. I'll have a look especially for not poking the Fep, but this never happened before. So I'll switch from elegoo S2 8k to this one, as I've been always waiting for a real auto leveling. Just a hint. There's also a heat USB plug available. In my man cave 2 degrees are missing. Significant for a great print or failure. I'll give it a try cause no additional heater plates would be necessary anymore. Greets from Germany. Keep on doing vids like that. 😂👍🏻👍🏻
@LoyalMoses4 ай бұрын
Thank you! And also, yes, that heater looks pretty awesome! I’ll have to get it and test it out. Congrats on your new printer!
@WARPAINTandUnicorns4 ай бұрын
Claps, user experince upgrades appricated.
@LoyalMoses4 ай бұрын
Agree!
@Trevor3DrPrints4 ай бұрын
The early bird price of this Printer is just insane. Elegoo resin printers are workhorses. I am so tempted to get it now but my Saturn 3 ultra is still going strong. So sad about the FEP mistake but so happy to hear the fail safe worked. Would have liked to hear and see more of this one via your experience. Meantime I must resist buying at this steal of a deal 😂 Edit: Well I went to order and in this day and age that ELEGOO STILL doesn’t ship to Hawaii really is unacceptable. As always I will wait until it’s on Amazon a year from now at this price. So disappointing
@LoyalMoses4 ай бұрын
The pricing I agree is absolutely insane! So much tech and hardware for so little money. And yes, I had plans for way more content! But, I’ll have that in a follow up video!
@Trevor3DrPrints4 ай бұрын
@@LoyalMoses can’t wait. You always knock it out of the park.
@LoyalMoses4 ай бұрын
Thanks Trevor!
@mrfrieze4 ай бұрын
I think we are at the point with these printers that we know they will print all the detail you throw at it, printing a smooth model is was better as it can’t hide small artifacts and wobble lines in the details. - Inspyr3D
@LoyalMoses4 ай бұрын
That’s a great point!
@DaVinci1_04 ай бұрын
All this 3d printing stuff is just make-believe.. we just have to believe we can make things ;)
@LoyalMoses4 ай бұрын
Exactly!
@technix_am2 ай бұрын
Elegoo just broke my heart. btw, have anyone told you that you look exactly like Dean Winchester?
@LoyalMoses2 ай бұрын
Nobody has ever told me that before!
@skwidman04354 күн бұрын
Just received my order two days ago and I didn't run it until last night because my wash and cure station was delayed in transportation. once I got everything in and set up I ran the full chess set files on the provided flash drive, the first print went well had a slight deficit in one of the pieces but nothing catastrophic, I cleaned the build plate and vat and started a second print, running the same files and file settings and I let the printer run overnight woke up to just supports hanging off the build plate and the printer still running like it was printing I stopped it and after cleaning everything up I noticed there was a crack going from the left side of the LCD glass to the right not sure what happened or why the AI didn't stop the failed print and if there was something in the vat why did the object detection catch it before it broke the glass I just dropped $700+ on this printer waited over a week to receive it all for it to completely crapped the bed after two prints in which the files where provided by elegoo currently waiting for a response from their warranty office but this is bs
@LoyalMoses4 күн бұрын
Oh no! That’s terrible, I’ve never seen an LCD crack like that. I know it can be frustrating, but also, stuff happens, in the whole scope of things, it’s not that big of a deal, just a little delay. I custom ordered a $90k truck, waited 6 months and it had a part broke when it arrived. Life is too short to be upset over little things, so I try not to let that stuff get to me. I’m 1000% sure ELEGOO will make it right, keep me updated on it.
@skwidman04354 күн бұрын
@@LoyalMoses most definitely 👍🏻
@user-es9kb7mf6n4 ай бұрын
so sad about the FEP sheet now you can print a high detail pac-man!
@LoyalMoses4 ай бұрын
I had so many cool Mario prints planned! 😞
@PerryWheeler-x7i14 күн бұрын
Sent mine back. Nothing but errors out of the box. Automatic bed leveling failed. Then a vat full of resin and an error telling me no resin detected..
@LoyalMoses14 күн бұрын
Oh no, sorry to hear that! Did you ever figure out what was wrong?
@PerryWheeler-x7i2 күн бұрын
@@LoyalMoses I sent it back and ordered the excellent Saturn 3 ultra :)
@Luptonium4 ай бұрын
Happened to our Mars twice.
@LoyalMoses4 ай бұрын
Sad! I had so much I wanted to print with it!
@matthewallison52194 ай бұрын
FEP replacement is my kryptonite - I have the worst luck/skill with tensioning and my 2nd FEP is dead before I know it. Any clue if replacing the FEP for the S4 doesn't require an obscure sized piece of foam or random bottle cap?
@LoyalMoses4 ай бұрын
Not sure, others have been easy to change - hoping this is the same!
@erichasz70684 ай бұрын
Never got to do that before!
@LoyalMoses4 ай бұрын
I’m glad you were first! 😁
@erichasz70684 ай бұрын
🤣 great video as well. Really like your content.
@LoyalMoses4 ай бұрын
Thank you!
@geekgee4 ай бұрын
sometimes, sh%^ just happens 😬 I'll stick with FDM, I'm thinkin'. Keep the great content comin', sir.
@LoyalMoses4 ай бұрын
Thank you!
@donsparish66154 ай бұрын
Will you possibly compair it to the saturn 3 ultra?
@LoyalMoses4 ай бұрын
I’d love to!
@BrianGreenstoneАй бұрын
How did you get the old Chitubox 1.9.x to work with the Saturn 4? Mine only supports up to Saturn 3 and Mars 4.
@LoyalMosesАй бұрын
I am not sure, this just the one I downloaded.
@DismemberTheAlamoАй бұрын
It should be noted, you keep saying FEP when this printer uses PFA film.
@LoyalMosesАй бұрын
Old habit!
@wolfie543214 ай бұрын
I worry that the flip up lid doesn't seal as well as the big lids that just rest on top. I've used other printers with doors or hatches and they never seal well, which means the room ends up stinking of resin far more than the ones where the lid just sits on top. How have you found it for fumes?
@mikkelkirketerp48844 ай бұрын
Moot point as you need a full on venting setup for resin anyways.
@wolfie543214 ай бұрын
@@mikkelkirketerp4884 What's your definition of "full on", I doubt more than 2% of resin printers are set up in a proper fume cupboard like they probably should. People have a range of setups, and how badly the printer lets off fumes affects how serious of a setup you need.
@LoyalMoses4 ай бұрын
While filming the lid was open a lot, and when I would close it the room would become almost void of resin smell, so although it is not a perfect seal, it’s very good.
@mikkelkirketerp48844 ай бұрын
@wolfie54321 i mean you should have a setup that captures all the fumes, whether that be directly from the UV-hood or having the printer in a chamber.
@wolfie543214 ай бұрын
@@mikkelkirketerp4884 I’d suggest 98% of people have to compromise and set it up with less than perfect ventilation, so stuff like how well the printer itself contains fumes becomes important. Chemical exposure is rarely an all or nothing proposition, it’s managing exposure levels rather than complete elimination.
@mash3d674 ай бұрын
Did they include a screen protector with the printer?
@dmhayes64 ай бұрын
Uncle Jesse said no on his stream this morn
@LoyalMoses4 ай бұрын
No screen protector was with mine.
@mrbigpip4 ай бұрын
it has a sheet on that jesse said he left on kinda like the usual packing sheets
@frankowens33732 ай бұрын
Fep ? Thought it was like pfa?
@LoyalMoses2 ай бұрын
It is PFA, FEP is stuck in my head like saying Kleenex. They are basically the same thing, but PFA is becoming more popular because it is a little tougher among other differences.
@-AHMADAL-TAIE4 ай бұрын
Please ..please ..please someone make a review comparing / talking about printing speeds (layer/hour)of these new resin printers in different types of resins since they are heavily marketed as “fast” printers yet nobody is talking about that.
@LoyalMoses4 ай бұрын
Definitely! Things are simplifying in resin, and I like it!
@CreativeVlogs034 ай бұрын
I had one for a week and had nothing but problems I contacted support, and they said due to China having a New Year they were not sure when they could get back to me So the printer went back to them
@LoyalMoses4 ай бұрын
Oh no! I’m sorry to hear that!
@ZachC-1304 ай бұрын
That’s funny, had the same issue getting a screen replacement from AnyCubic over their holiday.
@Mrpancake722 ай бұрын
I also had nothing but problems. Mine won't print anything on the back. I'd rather level my own plate than deal with this.
@Twini974 ай бұрын
is it possible that the resin goes into the machine when its tilting?
@LoyalMoses4 ай бұрын
If you overfill it, it could. But it will let you know.
@Twini974 ай бұрын
@@LoyalMoses And if you damage the fep not?
@badashphilosophy95333 ай бұрын
I think im getting into 3d printing at just the right time. Im leaning towards the elegoo brand but now i have to choose between resin and the other one, am i right in thinking the resin does prettier and more detailed prints? What are some other things worth taking into account if anyone has the time to help me out?
@mko-ai3 ай бұрын
Please dont start with resin. And definitely don't start with elegoo These are seeded reviews for a new release product. Most of their products have serious software issues and they make stupid mistakes. I purchased 3 elegoo machines. Please start with the Bambu A1 mini. It will work out of the box and save you the extreme headache buying elegoo products.
@badashphilosophy95333 ай бұрын
@@mko-ai maybe il wait a tad longer till the bugs are worked out. im after a big printer. bambu seems like a great brand but pricey. $990AUD for 256x print size which is to small, i have little choice but to go for the cheaper options even if they have some flaws so elegoo seems the best bet for over 300x printsize and i think half the price of bambu, why buy one when u could have 2 printers halving the time of multiple prints? seen older versions on marketplace too going for uber cheap but i dont want an older version at the moment where 3d printers are at, maybe in a couple more years
@mko-ai3 ай бұрын
@@badashphilosophy9533 they are not. Please start with the A1 mini. I just bought two for friends, one was just $169 as I had a discount code. You will be so happy you did.
@LoyalMoses2 ай бұрын
You’ll have far more applications printing with FDM, but you just won’t have the detail, and it will be less messy than resin. I’d suggest FDM first, see if you like it.
@jessicaalvis70633 ай бұрын
Great video :) but I can’t find the links to the wash and cure station :)
@LoyalMoses2 ай бұрын
Did I forget?!
@jessicaalvis70632 ай бұрын
@@LoyalMoses yep ^^
@mko-ai3 ай бұрын
Happened to me with the saturn 3 ultra. Its insane
@LoyalMoses2 ай бұрын
It’s a consumable. I should have been more careful!
@mko-ai2 ай бұрын
@@LoyalMoses they could have designed the thing better. I was shocked it was even able to do that
@user-Ben_S4 ай бұрын
Friend, I need one too)
@LoyalMoses4 ай бұрын
They’re nice!
@maestro-musicАй бұрын
Bro, how do I get that shirt lol it's dope.
@LoyalMosesАй бұрын
I love it! Found it online somewhere. Search Amazon!
@Fleshpenance4 ай бұрын
9:59 "Also having a good set of wash and cure machines is also essential. Now, it's not required, but..." Essential means required, so this is contradictory
@LoyalMoses4 ай бұрын
Nope, means necessary, which does not mean required.
@Fleshpenance4 ай бұрын
@@LoyalMoses'necessary' is also another synonym for 'required'
@Fleshpenance4 ай бұрын
@@LoyalMosesmaybe 'highly recommended' is closer to your intent
@pimprowdy14 ай бұрын
ok so lets see u change the FEP sheet on the next video lol
@LoyalMoses4 ай бұрын
They replied and are amazing, sending some new FEP over right away. We could definitely show an FEP change, it’s a bit boring though, lots of screw turning.
@pimprowdy14 ай бұрын
@@LoyalMoses is it the same as other Elegoo printers?
@LoyalMoses4 ай бұрын
It appeared so from the looks of it. Same as Prusa too, etc.
@ashrafsheikh43672 ай бұрын
Print jwellery
@LoyalMoses2 ай бұрын
Absolutely!
@JoeyBlogs0074 ай бұрын
What are the resins like nowadays? Still toxic and smell bad ?
@LoyalMoses3 ай бұрын
They are way better. Still have smell and have to be careful.
@jeffb18382 ай бұрын
Photopolymer will always be toxic, until AI makes some miracle material. You want resin to smell bad, just as natural gas has an added odor. Odor allows you to know where the toxicity is, so that you don't have silent killer in your home. I know many people who don't mask up, myself in the past included. It's not going to kill you if you run periodically. But if you are around your printer often, over a long period of time, I have to imagine it's way more damaging to the lungs than cigarettes.
@tomsmith59362 ай бұрын
Yes still toxic. VOC fumes need proper extraction and you should wear a suitable respirator when exposed to them.
@ZachC-1304 ай бұрын
That lid is not my jam lol. Looks like a mid 2000’s PC
@LoyalMoses4 ай бұрын
Kinda true!
@erichasz70684 ай бұрын
First😂
@LoyalMoses4 ай бұрын
Yes!!!
@JohnJones-oy3md4 ай бұрын
8:11 - Kek!
@LoyalMoses4 ай бұрын
LOL
@Conquerjt4 ай бұрын
Didn't really go over the features of the printer. You talked more about your Mario models than the printer...
@LoyalMoses4 ай бұрын
Did you see the word “review” in the title or description, because I didn’t. The thumbnail literally explains that I broke it and I talked about it.