No video
My Exterior Painting System That Lasts 10 YEARS!
Рет қаралды 99,783
Жыл бұрынHere is my technique for painting rough cut exterior cladding on your shed. This T-11 siding will absolutely eat paint, so make sure you have enough before you get started. Paint Tools: geni.us/difS4 (Amazon) To purchase C2 Paint and C2 Gaurd (used in this video) 👉🏼 c2paint.com/ho... and use discount code: HRVDIY for 20% off
Be sure to leave your questions and comments below.
Need Answers or Advice for your DIY Project?
BECOME A DIY MEMBER NOW!
Become a DIY Member by Clicking the Link Here:
/ homerenovisiondiy
► Get FULL access to me and my team for Q and A’s in the DIY Crew Forum
► Participate in monthly LIVE streams for live consulting and Member support!
Shop Jeff’s favorite tools and great products and help support our next project!
► Shop Wayfair 🇨🇦: www.jdoqocy.com...
► Shop Wayfair 🇺🇸: www.jdoqocy.com...
► Shop Amazon 🇨🇦: geni.us/mlVE (Amazon)
► Shop Amazon 🇺🇸: www.amazon.com...
► Shop Home Depot: homedepot.sjv....
► For up to date discounts on flooring, paint, hardscapes, soundproofing and more visit our website:
homerenovision...
*****Be sure to use the coupon codes before checkout
Did you know we are launching a newsletter? Sign up here: homerenovision...
Power your handyman or home service business with Jobber👇🏼
Free 14-Day Trial + 20% off for 6 Months: go.getjobber.c...
🔨 SHOP TOOLS 🔨
Tape Measure - geni.us/TapeMe...
DeWALT Mitre Saw - geni.us/MiterS...
Level - geni.us/BeamLe...
DeWALT Circular Saw - geni.us/Circul...
DeWALT Sawzall - geni.us/Recipr...
DeWALT Drill - geni.us/Cordle...
Makita Jig Saw - geni.us/TopHan...
Oscillating Multi Tool - geni.us/Electr...
WHAT TO WATCH NEXT:
► Drywall Done In 1 Day | All My Tips And Tricks - • Drywall Done In 1 Day ...
► How To Paint A Room | DIY For Beginners - How To Paint A Room | DIY For Beginners
► How to Build a Retaining Wall - Step by Step - • How to Build a Retaini...
#justdoityourself #lovingit #perfecteverytime
SUBSCRIBE TO OUR CHANNELS
► Subscribe NOW and hit the bell to get notified about new videos - / homerenovisiondiy
► Subscribe NOW to our 3rd Channel Home Renovision en Español - / @homerenovisionenespañol
FOLLOW US ON SOCIAL MEDIA:
INSTAGRAM👉🏼 / homerenovisiondiy
FACEBOOK👉🏼 / homerenovisiondiy
TIKTOK👉🏼 / homerenovisiondiy
Produced by: Home RenoVision DIY 2022
Videography Services & Editing Provided by:
www.Subdivisio...
Disclaimer:
Videos produced by Home RenoVision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and HRV cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said HRV cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code.
HomeRenoVisionDIY may earn an affiliate commission if you purchase something through recommended links. #commissionsearned
@mikestorm9578 Жыл бұрын
I'm a former painting contractor. 20 years and 650 exteriors... just trying to be helpful here. In the future if you can do it. Buy a $300 sprayer and for a 1 hour investment of time to get machine ready for the job and clean it 100% at the end, you will cut your time in half or much more. Simply turn the spray down low, so there is little over spray. Use left hand for spraying, right hand holds a 2 & 1/2 " angle brush. This combo of spray and brush in, spray and brush in will give you insane speed, do a far superior job. Keeps everything wet and no lap marks ever. Also I would personally use 1 oil primer cut with some penetrol (helps the oil primer go deeper into the wood surface). The oil seals the wood wonderfully. Give it at least 72 hours dry time for a more full cure (even though it says top coat in 1-2 hours on the can label) 2 coats of the highest grade latex you can buy after this and yes you are good for 10 years and possibly more. Use a 2 gallon bleach sprayer once a year with a 1.5% mix in water. Spray entire shed. Allow to "dwell" for 5-10 minutes and rinse well with a garden hose. This will keep the mold, mildew and dirt off. Prolong the life of the paint job tremendously. Again, just trying to be helpful. BTW.... I love your videos. Watched dozens of them over the years. You're very good and knowledgeable about so many things. Keep up the great work
@CarriUSA 10 ай бұрын
Seriously, why did they get rid of exterior oil based paint. Now I have to use a oil based primer on my wood exterior house? I swear, people who make these decisions don’t actually do the labor of maintaining their home. My 15 year old wood siding home now needs to painted and has a oil based paint. I’m building a shed to match and am so aggravated trying to figure out the best exterior paint and my house was last done with Sherwin Williams oil based exterior paint. So now I have to use a primer..which primer and which exterior paint and brand for 4 seasons? Akloid ? or acrylic last the longest on exterior wood that gets bitter cold in winter ..cuz I’m not painting every 7 years😩
@HunterHunter93 7 ай бұрын
What can be a great substitute of wood stain that can last many years?
@dks9564 Жыл бұрын
They were called Tribbles. The name of the episode was "The Trouble With Tribbles".
@stevecollins4290 Жыл бұрын
Also I believe voted the most liked episode
@keithkarbel2000 Жыл бұрын
Yes! But my first though was painting with a Pomeranian 🤣
@LeverPhile Жыл бұрын
Great episode!
@number1pappy Жыл бұрын
I have learned ,some things with your help ,that it's definitely worth every penny to buy high quality paint! I also have figured out that airless spayers are worth every penny,especially for the exterior! I also stopped buying paint from the big box stores. I discovered that even the so called cheap paint sold at actual paint stores is better than the crap big box store sell as premium paint. My local paint store even gave me "contractor prices". My best advice I could give people is to just visit your local paint store and just talk to them about your project. You'll probably find out that right away your getting a whole different level of service! That is something that big box stores just don't do.
@HomeRenoVisionDIY Жыл бұрын
Crazy how professional advice is right there but folks don't go visit . Cheers!
@chrisshattock9916 Жыл бұрын
For that kind of surface I'd use an HVLP sprayer. The small portable ones (like Wagner) are relatively cheap (less than €200) and useful for many surfaces and have the option of a different head for interior cabinetry work.
@CalebGibbsAvenue Жыл бұрын
My thoughts exactly but will it handle this kind of paint.
@chrisshattock9916 Жыл бұрын
@@CalebGibbsAvenue Should do; I checked the C2 website (from Spain) and the C5200 is latex based and sprayable without thinning. The C5300 is acrylic but I cannot find its data sheet. I have an old version of the Wagner FLEXIO 4000 with what they now call an iSpray head which handles latex and acrylic. These are simple to test and adjust even without thinning for sample rough surfaces - even if you need to use two coats.
@HomeRenoVisionDIY Жыл бұрын
That would be a great addition to the toolbox for many folks. Cheers!
@CalebGibbsAvenue Жыл бұрын
Will an air Sprayer work as well? I'm not familiar with what air Sprayer limits. That's all i'v ever used
@chrisshattock9916 Жыл бұрын
@@CalebGibbsAvenue By which I presume you mean from a compressor using "high pressure". Yes, but you will need to verify the nozzle size for acrylic/latex paint and you have to use very low pressure. The pressure in an HVLP (High Volume Low Pressure - often also called "airless") system (like the Wagner) is pretty much no more than the inverse of a vacuum cleaner at its lowest settings - hence high volume. In a compressed air system the paint/thinner mixture is effectively atomised (misted) under the pressure which is more what you'd want with lacquer etc. (as in car/metal spraying) - this is High Pressure Low Volume (thinner is used generally with such paints because of the small nozzle size required). Larger (i.e. more expensive) HVLP systems (€450+) may have limited pressure control but the "domestic use" HVLPs generally don't, or only have a high/low setting. I'm not a pro - but I have used HVLP in a domestic setting for a few years and I've found HVLP to be very useful since I don't intend spraying cars!
@framepeddler3882 Жыл бұрын
Spray and back brush speed is the name of the game. If your right handed paint to your left. Your ding it bass awards.
@HomeRenoVisionDIY Жыл бұрын
maybe but I will use my sprayer on the next project.
@pjespinal5037 21 күн бұрын
Should say I've never been able to buy a sprayer. And my panels looked great. I enrobed my wood with paint. I was proud. Did the pump house and the shed and the chicken coop. Raw wood n shake n paneling. Was so cute!
@pjespinal5037 21 күн бұрын
I know that the preferred go to would be a sprayer for such a texture as paneling but having lived my early life in a mobilehome back when real paneling was used inside. I painted paneling then and now after a prep rinse roll- Roll it sideways on the first roll like puttting a hole. Then go vertical. Yes, work steady in the sun. Lived in the south always and heat is always and mostly sunny . that wet edge is like chasing smoke.
@RRRRThats5Rs Жыл бұрын
I just finished a whole house with this siding (ugh), and for the grooves it really helped to buy a big pack of different size foam brushes. You can push them into any weird spot and the rough siding will eat though them pretty quick, but a couple dozen was still cheaper and neater than destroying my good brushes
@HomeRenoVisionDIY Жыл бұрын
for a whole house I would suggest using an airless sprayer. I am sure they rent those out at home depot.
@RRRRThats5Rs Жыл бұрын
@@HomeRenoVisionDIY Definitely! I did spray+roll the big broad areas, but the bottom floor was 80% trim and penetrations... the best technique would probably be to just move!
@HomeRenoVisionDIY Жыл бұрын
LOL. I feel Ya!
@MrAB011 Жыл бұрын
When painting bare wood, I highly recommend a 3 coat system: 1 coat exterior oil primer + 2 coats of premium quality exterior paint. Primer recommendations: Zinsser Cover Stain, Sherwin-Williams Extreme Block. For finish paint, stay away from big-box, hardware stores. Go with topline exterior paint from one of the "Big Three" - PPG/Dulux, Sherwin-Williams, Benjamin Moore.
@alexandermaciag377 Жыл бұрын
This looks like what I call T1-11 wood panels.When I was a general contractor in the state of Oregon, one of our customers had a rental home on Rice Hill with its exterior walls with this We approached this job early in the morning and lightly sprayed water to absorb into the T1-11 panels before doing the same method you are showing here. With good quality paint, we used much less paint, and with 2 coats and 5 gallon cans of paint used to do this job, we used really a lot less paint and had great results in the Oregon climate. Good luck.
@knoxlowe1 Жыл бұрын
Jeff, my house has T-111 siding and I love it. I rolled and brushed it just like you had to do it on this project. The really good news... I've been in this house for 28 years and I only had to paint it twice - when we first moved in and then 15 years later. It's beige paint so you don't really notice any fading, And, the paint really soaks into the rough texture and there's zero chance of peeling. I can go 15 years between painting the exterior and the only part of the house that might need a little attention is the elevation facing the sun on the South end. I use 2 coats on a full painting and I add a single touchup coat on the south elevation 10 years later. Love that T-111.
@knoxlowe1 Жыл бұрын
PS - I used Behr semi-transparent stain from Home Depot and it has a texture and thickness exactly like paint. I was initially covering a previous stain and I was very surprised by the thickness of the new stain. And, 28 years later, I'm very pleased with the performance of the Behr product.
@barbarahenn-pander5872 Жыл бұрын
I have a laugh out loud moment during every video you make! “Keep your ass to the door, folks!” I appreciate the quality of your instruction and all my DIY work is great because if your tutorials. Thanks!
@HomeRenoVisionDIY Жыл бұрын
Cheers, but keep your ass to the door is a very vital component to great results. Cheers!
@DanielDickin Жыл бұрын
This seems like the perfect time to use your paint sprayer? Faster and easier
@HomeRenoVisionDIY Жыл бұрын
Fine I will use nit on my next job. I just don't expect most folks to have access to one. Cheers!
@CalebGibbsAvenue Жыл бұрын
Correct
@florahibernica Жыл бұрын
@@HomeRenoVisionDIY having watched you do this, and knowing you make things look easier than they are through sheer practice, THIS is the job that would convince me to hire one at least!
@thebluelunarmonkey Жыл бұрын
@@HomeRenoVisionDIY lol
@Rambleon444 Жыл бұрын
The easier/better way is to buy 5 gallons put a grid screen in it, roll out the paint (1-1/4 lamb skin) on the siding (get the edges) and trim before you build the shed, and then do a little touch-up after the shed is built. When you are done no need to clean the roller just keep it in the bucket until the next job. You can also use a cheap corner foam roller for the groves. Or of course, use an airless sprayer.
@GannDolph Жыл бұрын
Thanks Jeff! I always learn something useful watching your videos, even though my projects are usually unrelated. The product and technique insights are golden!
@HomeRenoVisionDIY Жыл бұрын
Glad to help!
@Shroommduke 17 күн бұрын
I'm doing siding just like that what a PITA! old and dry and I got rotten wood to replace. looks like the trim wasn't caulked... Total Aircraft: 13732 (in the air) Amazing!
@ozziestrom9793 Жыл бұрын
When ever I paint over T-11, I always use a combination of a spraying first then go over lightly with a roller making sure the cracks are filled in. This way, there isn't any streaking and less paint has being used.
@jonathanmcadams-nx5zp 7 ай бұрын
I have t111 as well and I have had it since 1980. I have replaced a few areas on a 3,000 square foot home on the beach in Georgia but it is to be expected. I can tell you all about maintaining t-111 and repairing damaged areas, rot, preventing rot and routine things to avoid problems and added expenses. I can also repair it very quickly and I know the best materials, brands, and preparing that should be used to get the most out of your siding. Also where the weak points are and how to combat them or remove them with changes or upgrades and even what you can do to upgrade eventually if you want to install a higher end facade like faux stone, hardyplank, stucco, exterior poly foam products, or real wood and the easiest ways to prep for it, the cheapest ways to prep for it, the best ways to prep for it, and the average amount of time you will get from t-111 and how long you will get from going over it later on with something different and using it as a base to cover with another product and attaching onto the T-111 which is easier with certain things and some need a moisture barrier and some don't but most need one for code to be compliant. I am currently making custom foam planks that are a closed cell foam that I am going to essentially epoxy after I color them in with a sprayed enamel and then brushed enamel and then finally rolling a pattern on the plank and then the epoxy goes on top brushed on very lightly with an additive to make it not shine as much and look amazing when done. I learned it in 24 hours of experimenting with foam, dish soap, Portland cement, and some dyes and chips of various sized rocks and peddles and sand and sawdust that I finally got right and can produce in mass amounts in a quick amount of time. But it is a 14 step process from start to finish and takes about 9 hours to do and another 2 days to fully cure I believe.
@CarAudioInc Жыл бұрын
I like how he says "alright" "right" and "ok" a lot.. sign of a good teacher
@HomeRenoVisionDIY Жыл бұрын
Cheers!
@liamhawthorne9798 Жыл бұрын
Great work. Thanks again for the video! I might spray paint mine to avoid all the brushing and setbacks
@HomeRenoVisionDIY Жыл бұрын
Go for it!
@TinManKustoms Жыл бұрын
We just painted a 1600 square foot house with pine board and batten. We found using killz to seal the knots works good and a foam roller that's meant for block works best and a couple of different size brushes. To do 2 coats we where 12 gallons.
@marciaewell2661 Жыл бұрын
"Trouble with Tribbles". I just painted an old shed and a new one 3 days ago in same tan color. I rolled and back brushed 2 coats of primer and then 2 coats of paint. Primer is cheaper than paint and it will soak into the rough surface seal it and also be a binder for the paint increase the adhesion over just paint. Primer will make everything last way longer than just paint, less flaking and peeling, I use a normal 3/8" wooster roller and the trick I used for the channels was after I applied the paint on the flat part of the siding, I tilted the roller at a 45 degree angle and used the corner of the roller to fill paint into the channels, then a quick back brush in the channel to really get it good. Same technique for trim or any corners, use the edge of the roller first then back brush. I used a 4" disposable chip brush from the HF store with natural bristles and it worked very well and only lost a few bristles.
@steveletniak983 11 ай бұрын
as a old painter with 42 years , i always pulled our an graco airless sprayer ` for this type of work,and whizzed thru in no time,with pressure this lasted a long time.. on some surfaces an oil primer is necessary to make it more weather resistance before applying the finish coat. good bye brush and roller. as these panels love to take in water when not properly preped.
@RyanBissell Жыл бұрын
3:10 "The Trouble With Tribbles". One of the few episodes I actually know the name of.
@deannasparks996 Жыл бұрын
Yes, Tribbles! My Dad made me watch with him..I was like 5. One tv in the house and I was the remote..lmao!
@xshawnnax6 4 ай бұрын
I’m a female homeowner, with not much help. Whenever I need to figure out how to do something myself, I head to your channel. Thanks for being my KZfaq dad 😂
@geraldplatzner4014 Жыл бұрын
Use an airless sprayer much faster and better coverage.
@HomeRenoVisionDIY Жыл бұрын
great tool if you have one, or are willing to rent it. But for small jobs the cleanup is just not worth the speed.
@x1984x Жыл бұрын
I can't believe Jeff just made a tribble reference! 🤣
@HomeRenoVisionDIY Жыл бұрын
Fun to look back on what we used to entertain ourselves with eh!
@x1984x Жыл бұрын
@@HomeRenoVisionDIY oh I'm a huge Trekkie so I knew where you were going soon as you got that look on your face.
@HomeRenoVisionDIY Жыл бұрын
Noice! Cheers!
@jdubya54 Жыл бұрын
That was the episode i think
@minnesotawyatt2821 10 ай бұрын
Do not wipe your brush on the side of the can after you dip. Either tap the inside of the can on each side or shake the brush in the can. Then apply to the surface with three brush swipes. Reload the brush and do another section. Do three areas if close together and then go back to the first and second and lightly smooth it out. These two tricks will save you about 20% of your time. Oh, push yourself to go a little faster...you will get more done in less time. (Thirty years painting...) What the hell, another tip. Whenever possible, pour your paint into a 5-gal bucket. Use a grill and a 9-inch roller on a stick. Dip the roller halfway into the paint. Do this several times if the roller is clean. After loading the roller (dipping the roller) roll it on the grid, lightly tap the roller bar on the inner edge of the pail and begin to roll.
@millieatr 9 ай бұрын
Great video ,,,,,,I have tried all different styles of painting ,,,but i have found what works best for me is let my wife do the painting
@Simon-fg8ec Жыл бұрын
“Wet it and forget it” It deserves a MEME!!😂😂😂
@nataliedamas8964 Жыл бұрын
The episode of Start Trek is called Tribble Trouble. You had it right.
@agnome3777 Жыл бұрын
😂😂😂 "The Trouble with Tribbles" was episode tile I think.
@HomeRenoVisionDIY Жыл бұрын
Cheers!
@user-xl3py6tj8d Ай бұрын
It was " Trouble with tribbles" 😊
@c50ge Жыл бұрын
At 4:40 took a splatter to your eye, I spend more money for lambs wool rollers. I professional painter gave me this tip 20 years ago. Lambs wool holds much more paint, (less trips to the pan)and doesn’t splatter nearly as much, (much less paint where you don’t want it) I used to end up with overspray on my glasses and on the floor. It is worth the money. Also buy a roller spinner to super clean the lambs wool roller and it will last for many jobs.
@nejdro1 11 ай бұрын
they also don't mat down like synthetic rollers do.
@jayadevadasthevoiceoftheso6585 Жыл бұрын
If you roll sideways too, you can definitely fill those grooves with the roller.
@nejdro1 11 ай бұрын
One trick is to actually turn the roller on edge and slide it down the grove, then a quick back brush.
@terrivance8750 Жыл бұрын
Jeff, Complete novice w/ construction, but I do know Trek. The episode was "The Trouble with Tribbles." 😊
@badmotherhumper Жыл бұрын
Trouble with tribbles! I loled at star trek, knew right where you were going.
@marklaffey7972 Жыл бұрын
Love the video, but here are a couple of tips for you and your viewers! Only roll one panel per dip, go extra heavy on loading up the roller and have someone back brush the extra paint as you go. On new wood like in your video it is essential that you back brush weather spraying or rolling because of adhesion and it always takes two coats. Oh and I add mold inhibitors to the paint.
@HomeRenoVisionDIY Жыл бұрын
Thanks for sharing
@JTOTHEW3000 Жыл бұрын
Tribbles..just because someone else beat me to it ;)
@HomeRenoVisionDIY Жыл бұрын
LOl, Thanks for that!
@gBayCanada Жыл бұрын
I painted the same siding with a 1 by 6 in brush and was fast and effective. Very little splatter.
@HomeRenoVisionDIY Жыл бұрын
nice choice!
@khazza930 Жыл бұрын
"buzzing the tower with a flyby"... love the reference :D
@HomeRenoVisionDIY Жыл бұрын
Top gun!
@user-ju8sv5pf7f 7 ай бұрын
Watching the way you took off excess paint from that paint brush on the lid of the paint can told me all I need to know 😅
@TheTaipan Жыл бұрын
Star Trek (The Original Series) - The trouble with tribbles. Dem tings are called Tribbles ;)
@psrpete Жыл бұрын
I’m hoping you just did the rolling first as a lesson to first time painter of T-11, since anyone that has ever painted the T-11 knows you need to brush the grooves and then roll the rest of the siding.
@HomeRenoVisionDIY Жыл бұрын
same thing only different. Cheers!
@bethwitherow6947 Жыл бұрын
The Trouble with Tribbles is the name of the Star Trek episode.
@uzairgilani6668 Жыл бұрын
Tribbles from Star Trek Jeff!
@juliettelynne5861 8 ай бұрын
“Tribbles”……. Star Wars Paint rollers 😋
@juanitawatson596 Жыл бұрын
Birds sound nice.
@TheMeanArena Жыл бұрын
The Trouble With Tribbles
@animapulcra9205 Жыл бұрын
Why not roll impregnating alkyde oil over every piece of wood before painting?
@totschopper Жыл бұрын
If you sand above 180 you start to close the wood grain preventing proper absorption.
@marciaewell2661 Жыл бұрын
I agree, use 120 grit for the floor to help promote the stain to soak deep, you only get one chance with a sealer, one good flood coat, or 2 consecutive coats like Jeff did.
@dad1432 Жыл бұрын
Dang, last time I weighed 180 was the early 90s.
@totschopper Жыл бұрын
@@dad1432 damn shorty thicc
@mromutt Жыл бұрын
They are called tribles haha they took over station K-7
@HomeRenoVisionDIY Жыл бұрын
they were everywhere. Cheers!
@polasol4964 Жыл бұрын
I’d be spraying and back rolling. At minimum, paint out of a 5 gallon bucket with a grid.
@TheOrgCaptainHowdy Жыл бұрын
Tribbles...you had it right.
@HomeRenoVisionDIY Жыл бұрын
Cheers!
@marjoriejudge5348 Жыл бұрын
Does anyone else think we coming around to a full circle (?) The customer wanted this to be an entertainment shed - makes me think of all those tiki set ups in vintage houses 😁- - - yep, spend the summers in Minnesota addressing maintenance - - regarding eating paint , my brother tried out one of those graco automatic paint rollers ....he complained that it took one gallon per wall , but I wonder if that wasn't because he might have been coating new dry wall which might have been part of the reason too...hmmm🙂
@randypoe560 Жыл бұрын
i used my spray gun. aim to the left and then to the right to spray into the crack and easy second coat.
@mabolzichjjl Жыл бұрын
Beat the devil out of it. A hat tip to Bob Ross?
@HomeRenoVisionDIY Жыл бұрын
One of the all time Greats! Cheers!
@drewstewart7314 Жыл бұрын
Spray
@user-hy9xr4wy6e Жыл бұрын
The Star Trek fur balls were called Tribble
@adonicacabreja8920 Жыл бұрын
You were right, tribble lol
@stockyirish Жыл бұрын
You were right, they're called Tribbles, that episode is titles Trouble with Tribbles.
@jmorv8866 Жыл бұрын
Dumb question Jeff, what are your thoughts of painting that type of wood with a sprayer?
@HomeRenoVisionDIY Жыл бұрын
depends on the size of the project. this size of shed was about a 50/50 for me because I don't like to set up all the masking and clean the machine when I am done for small jobs. It would work fine as lomng as you back rolled after spraying to get good adhesion. Cheers!
@southern842 4 ай бұрын
How would you recommend painting cedar shutters?
@klinkster1955 Жыл бұрын
With all the trouble of rolling and brushing, Couldnt you have sprayed on a thick primer first then rolled and brushed?
@wskripka1 11 ай бұрын
How about using a water base of oil base primer to prevent the top coat from skinning ?
@aaudain1 Жыл бұрын
Great idea 💡👍🤠💯
@HomeRenoVisionDIY Жыл бұрын
Thank you! Cheers!
@brawksolid6285 Жыл бұрын
The way that sheathing was milled is so crappy. Once you paint over it and hide the wood grain color/pattern, it really accentuates the horizontal saw marks.
@hockey2806 Жыл бұрын
Great video! Do you have any videos of staining a cedar fence?
@HomeRenoVisionDIY Жыл бұрын
coming up soon. Cheers!
@bigunone Жыл бұрын
When my dad painted he always ended up with as much paint on him as the room he was painting!
@HomeRenoVisionDIY Жыл бұрын
cheap paint and a cheap brush will do that. Cheers!
@Dormices Жыл бұрын
Tribble!
@HomeRenoVisionDIY Жыл бұрын
God that was n sooo Corny eh!
@Dormices Жыл бұрын
@@HomeRenoVisionDIY Corny but cute! They would be useful if amenable to training, and clear gutters and downpipes.
@McplQuebec66 11 ай бұрын
The trouble with tribbles
@michaelcurnutt Жыл бұрын
What to you think about treating the lower section using Japanese Shou Sugi Ban?
@ohfortheloveof..3974 4 ай бұрын
What do I use to paint over my outdoor osb siding
@mannysmith1962 11 ай бұрын
I noticed you didn't use a primer first, is it because the paint already has primer in it? What do you recommend?
@loujeanadams2500 Жыл бұрын
They were Tribbles! LoL Episode called "The Trouble With Tribbles"
@RuedaLibreMotoAdventure Жыл бұрын
Sprayyyyyyyyyyyyyyy
@ds61821 Жыл бұрын
It there a reason you didn't use a sprayer for this project?
@HomeRenoVisionDIY Жыл бұрын
I don't see any benefit on a small job. by the time most folks go rent a machine and then clean it up and mask the deck and doors the net benefit is gone. On larger jobs the sprayer makes sense. Cheers!
@ds61821 Жыл бұрын
@@joseph7105 I'm a DIY person myself and used a sprayer for my room addition exterior. I installed primed fiber cement shingle panels then borrowed a simple Wagner sprayer and it worked great. A paint sprayer is definitely DIY tool.
@janonthemtn Жыл бұрын
Tell me how to keep rodants out, thanks.
@michael1980q Жыл бұрын
May I ask a silly question? If the home already has exsisting paint NOT peeling but a color that I dont like, can I just paint over it? I know i need to power wash but other then that?
@OldmanJM Жыл бұрын
The trouble with Tribbles.
@halwainerdi7718 Жыл бұрын
Tribbles
@OLDGRIZZ Жыл бұрын
I would like to paint my kitchen counters and backsplash both are ceramic 10”x10” with grout. Pls . Any info would help. Thankyou. Kevin.
@HomeRenoVisionDIY Жыл бұрын
some things I just can't recommend. I would suggest tile over tile install first before painting in a food prep area! Cheers!
@Sylvan_dB Жыл бұрын
when/where was this filmed that the robins are nesting and all the plants are green? Sure doesn't seem like November in Canada! Shed looks good!
@josephjaramillo2793 Жыл бұрын
I watched your videos on vinyl flooring and idk if I missed it somewhere, but how should I install cabinets, appliances and vinyl plank flooring together? If you already did a video about this can you link it for me please? I have concrete floors and was wondering if I’m supposed to put some type of wood down to match the height of the floors before putting in the cabinets and appliances? Also what should all should I put under the flooring? I know it needs vapor barrier, and the vinyl flooring I’m looking at comes with underpayment attached.
@robertm5969 Жыл бұрын
We bought a house with a shed this year and the T111 is in rotted near the bottom. What's the easiest way to fix it? Cut out the rotted part and replace, or replace the entire panel? If I cut and replace just the rotted part, how do I seal it by the cut? I'm also wondering how to prevent future rotting. I'm guessing this was caused by water falling off the shed roof and hitting it. Is there a ground cover which would prevent rain runoff from splashing on the sides?
@robertm5969 Жыл бұрын
Update: going to cut out the rotted parts and replace with fresh T111 and caulk the gaps, then paint. Going to put on gutters unless I find plants that dissipate splashing for cheaper
@shootnguns6075 Жыл бұрын
Come up 12 inches or 16 inches from the bottom of the T111 and pop a line all the way across the wall, set your saw to the thickness of the T111, cut on your line, slide some galvanized "Z' flashing underneath the old T111, cut your new pieces of T111, put 2 coats of PPG Gripper primer on the bottom edge of each piece that faces the ground and 3 inches up the backside, put each piece up, put 2 coats of primer on the rest and also 2 coats of paint and don't forget to also put 2 coats of paint on the bottom edge of the new T111 pieces that face the ground. 99% of the time people don't primer and paint the bottom edge of the siding that is towards the ground and that's what causes the rot. All the major sidings web sites say to do this on their installation instructions.
@jrandallmoore Жыл бұрын
The episode was called The Trouble With Tribbles.
@Evian1990 Жыл бұрын
First you said you can paint the caulk right away, then you said you have to wait 24 hrs. We'll, what is it? And aren't we supposed to prime exterior wood?
@Nohidhea Жыл бұрын
Wouldn't using a low-pressure, high-volume air gun for painting a better idea?
@stevenduering7155 Жыл бұрын
That’s not a paint roller. That’s a freaking sheep
@CalebGibbsAvenue Жыл бұрын
I'd add Enron harding to the paint. Bad stuff but really good. Has enyone used it in this tip of paint?
@nicknanas623 Жыл бұрын
Spray and backroll is the way much faster.
@mtnn4459 Ай бұрын
We buy primer. Primer prepares the raw wood before painting. Yes - painting T1-11 is a lot of work. I buy quality paint.
@patrickcullen2714 11 ай бұрын
knitted roller next time
@coldjello8436 Жыл бұрын
I've watched other videos where an oil based primer and then an acrylic based top coat was used. Is that the best way to paint exterior wood?
@HomeRenoVisionDIY Жыл бұрын
the real secret is keeping it dry. don.t have organics like bushes against the house. This material already comes with a sealer in it.
@coldjello8436 Жыл бұрын
@@HomeRenoVisionDIY thanks
@nejdro1 11 ай бұрын
T--111 is not pre-sealed!@@HomeRenoVisionDIY
@jepps77 Жыл бұрын
I have a couple of columns (I think they're fibreglass or some kind of resin) here in Ontario and the paint keeps peeling off. Any advice for the best way to repaint them? How is the best way to prep the columns and which type of paint?
@marciaewell2661 Жыл бұрын
look into a primer than is designed to bond to the material your columns are made of, 2 coats of primer after lots of sanding and wire brushing old paint, then use a high quality exterior enamel. I like the Ben Moore products, pricey, but they go on well and hold up very well. The prep takes the most time, time is money, so do it right the first time and by top tier materials.
@chrismarro1867 Жыл бұрын
How long after PT deck can you Stain it or treat it
@camelface1 Жыл бұрын
I just painted two rooms that had this wood over half of the walls. A hellish nightmare. Brush in the center of the groove, the left of the groove, the right of the groove. Dip brush again and repeat for the bottom half. Then do that 240 more times + all the trim. Next time I paint, I’m ripping all that out.
@HomeRenoVisionDIY Жыл бұрын
Great plan!
@victordiaz5494 Жыл бұрын
Just use a paint sprayer
@treymurphy6398 4 ай бұрын
Why not use the brush for the whole thing is it just because of the time it would take
What the Meowk!
Рет қаралды 9 МЛН
Okeefe Painting
Рет қаралды 562 М.