Well done, My Friend! And it’s borderless…just like the US!😳🤣🤣

Try clamping the wood pieces together with out gluing. Then carve while clamped. Paint or stain individual slats. Then glue together. Reduces taping time and messy paint/stain bleed

As a Navy chaplain on terminal leave after serving for 25 years, this is awesome!!

Max, I’m not sure if I have seen a more beautiful piece of work!! You have the gift and the talent to turn wood into masterpieces!!

I thought you would get the wavy look by using Home Depot’s 2x4s😂

As always, great job Max. Wavy flags are one of the hardest to do. You make it look easy. The edges puts the flag a step higher than others I've seen. Great touch. Your shading with the torch added a great touch as well. Something that works for me to keep mistakes and paint bleed to a minimum: When you have the first stripes taped (in this you taped the white first), after you stained the red stripes and it dries, you can spray on one or two light coats of seal. Once that dries, change up the taping (take off the tape on the white stripes, put tape on red strips) then stain the white stripes. If any stain bleeds, it shouldn't stain over the red before you can wipe it off (seal coat should stop the stain). This method works even better for staining stars. Blue stain for union, one or two coats of seal, then carve out the stars. Start staining stars white. Any white that gets on the blue cleans up quick and easy with a wipe of a rag.

Hey … I made my first flag today using your technique of angling the corners. It looks great! Thank you!

I'm Canadian, and I LOVE it!!! How are you not a millionaire selling those by the truckload?! Great work

This wood flag technique is the best I have ever seen! I believe I have watched some of your other videos. This is definitely the one I want to try and make. Thanks for including every detail and method to create this. You answered every question I could think of. Well done video! Most of all, thanks for sharing! 👏🇺🇸👏🇺🇸

Nice job ! People don't realize just how much time and work goes into something like this, I've been a carpenter and wood worker since 1971, sale price for this should be in the at least $75-$120 dollar range, good craftsmanship there young man. 👍

great video as always, i made your mini flag build and use it when we go camping as our site sign ive made 3 in total i gifted 2 of them both to veterans and they were really appreciative of it thanks again for sharing your knowledge and talent

This is definitely my favorite flag, great job Max! Love it! ✌🏼❤️🙏🏼

I am going to have to give you an A+ on this piece, Very nice , well done, I really like it ! Exciting my man.

You have been a great inspiration for all of my work. Awesome job as always. Back to the lumber yard I go.

That looks amazing thanks for sharing your techniques you make it look so easy Great video Thanks

DUDE! Nice job! Those are gorgeous! Im looking for my niche…you found yours! Thanks for sharing! 😊❤🙌🙏

😳 That flag is freaking AMAZING! What an awesome result, and a great tutorial. Well done all the way around. 👍🏼

Beautiful, love that sculptured wood look. Great job & explanations.

Glad I found your page because I was looking to make flags like this one and you make seem so easy to produce. Great job!

Hola Max, es un gusto ver un trabajo tan bien hecho, se agradece tu esfuerzo por mostrarnos paso a paso como elaboraste esa bonita bandera. Saludos desde el norte de México.

That is a Awesome wave flag. I have seen a few made and that is one of the best. Great job. I will be trying this. Thanks Max.

glad to see it's not just another cnc vid. looks amazing bud great job

Very cool. I have the wood glued up and ordered the carving disk and stencils

Young man you have a talent Looks great and thank you for sharing enjoyed it Be safe God Bless

Absolutely beautiful work. No more needs said.

absolutely beautiful job!!!! Loved the video and subscribed!

Kia ora from Aotearoa (New Zealand) Wow that's friggn amazballs!!!! Thanx for the inspiration & for sharing with us. You have definitely got a new subscriber 🥰 🍻

Looks amazing… Great job. Thanks for sharing… 👌👌👌

This flag is beautiful and I really appreciate how you have shown step by step how to do this! I am excited to try to make one myself!!

Very nice work!!! I will definitely be making these!! Thank you!!👍🇺🇲

Very nice work. Just finished my 2nd flag. Ready to try this.

Damn nice!!! And you made it look simple…..thanks for sharing.

That looks awesome. I definitely want to try that. Great job

That is awesome. I love it. Thank you for showing me that.

Saw a lot of videos 'bout carving waving flags, but that's great! Very awsome work! I'm from germany, so greetings from here.

Thats Aweome! A few of the flags I made for people, I used Acrylic white Paint in the stars with a lining brush and the other ones I used a lining brush with the white stain. Very time consuming but it contrasted better with the white stripes. But this looks amazing, I'll have to try this one out! Keep up the good work!

Your way is the best way of making one that I have seen. Nicely done and a great video too!

I've done pretty good selling flags over the past few years. I did a thin edge one like this a few years ago. I always considered it my flag cause it took 3 years to sell. I had it listed for 100 more than my normal flags. A few friends told me it was cool but not necessarily worth the extra money. Now that it's gone I miss it cause I really liked it.

Love all of your art but I really like this flag. Thank you.

Think this is my favorite flag you have done. That grinding disc while putting out a ton of dust really works well. I'm with you on using the frog tape on these, I don't have a lot of issues with it bleeding the stain like the blue tape does.

Awesome wooden flag, your skills with the stars was excellent.

I'm excited to build this flag. I have my boards cut down to one inch. Had a mishap with blade that's stopping me a little bit. You do make it look easy. Handcarving the stars will be a challenge Thanks for your posts.

Incredible! Outstanding concept and perfect execution.

Very nice result. It appears to be adaptable to a Betsy Ross flag, or an 1812 (15 stars, 15 stripes) flag.

The way you did the edge by trimming out the back side made a really nice effect.

You did such a beautiful job on your flag! It is the small touches that make it so remarkable! God Bless you & the U.S.A.

World most beautiful American flag is here! Well done bro... 1000 Subscribed

I've seen a lot of these done. Finally, someone does it in my opinion correctly.. flags are thin, so i like how you did the edges to make it look thin..

Kudos to you for your good work. I also made flags but gave it up because of the CNC groups underpricing actual artist that produce by hand. It's nice to see you make yours exactly the way I did.

That is absolutely gorgeous!!!

You do such a good job. The flag is amazing.

Very nice. I will have to try one myself. good job

You did a really nice job. I make mine almost the same way. Keep up the good work.

That is a cool flag. Nice work. I don't have the patience for doing those stars like you did. I'd have just painted them.

It looks awesome, thanks for sharing how to make one.

Wow bro, that is AMAZING! I'm inspired by your work

Very nice I might have to try this. I bet you can also carve those waves in with the table saw. You would need to make a little jig to hold it at the angle to ride against the fence. Then you clamp a strait edge (Make shift fence) at a 30 to 45 degree angle of the table saw blade. You raise the blade a 3/16 to 1/4 in above the table of saw and push the wood across the blade. You are basically using the saw blade as a large shaper. Then just raise the blade a bit more and make another pass. It sounds way more dangerous than it is. LOL Izzy swan ha a few videos on it and one he even makes a really nice jig that is far more advance than I am describing. But I have done it myself several times for projects that need coves. My dad was a wood worker cabinet maker and he shown me this trick 30 plus years ago. Izzy just took it to the next level. But you might play with it a little maybe it will work. Link below for Izzy's video. But really nice work. I have made a lot of nice things with 2x4's. It is cheap lumber. You just need to be a bit picky when buying them. kzfaq.info/get/bejne/nrd5YNyBmLjUcps.html

Wow that looks amazing!from one artist to another, outstanding job! You got yourself another subscriber! (Me) lol! 👍

Wow, that’s really beautiful. Amazing workmanship 🇺🇸

Wow!! You Sir are very talented!! Great work and tutorial!

Very cool. Fantastic. Great job.love the look 👍❤...

Really impressed with your work.

Absolutely Awesome!

GREAT JOB. looks great.

Great job man. I must say you have the patience of Soloman.

Nice work! Thank you very much for the tutorial.

The wood flag is beautiful!

Max F - very nice! I have also made many for sale, folks really love them. The modified Betsy Ross (13 stars in a circle with '1776' in the center of the stars) also looks very nice. One suggestion though.... The waves in a flag always originate in the upper corner of the hoist side (that is the upper corner of the blue field) and move towards the lower right. Never from the fly corner towards the lower left. Just has to do with where the flag is always fixed...the upper grommet on the hoist side. Cheers, John

Absolutely gorgeous!!!

Awesome project. Thanks for the tutorial.

Absolutely BEAUTIFUL!!!

Love it, heading to the wood shop

That's a really nice piece. Great video

That came out awesome, nice work!

You can use wax paper under your glue ups to prevent the work sticking to the bench. NICE JOB my friend!!!!

That flag rocks

Very nice work, i will try it on my own next vecation. 👍 You should panit/stain the back sides on the edges too, that would make a perfekt look. For the glueing proces use baking paper as table cover. The most wood glues dont stick to it and you can often reuse the paper, because the glue will fall of, if it is totaly dry. Just do a dry run befor using a new gluetye for the first time. Keep on the good work!

🎯Awesome! Thank you for sharing!

Beautifully done!

Gorgeous Old Glory!

Amazing work you do. I would love to make stuff like that but I just can't get tools

That's cool man. You should do other flags like Ireland, Scotland and so on. God bless

i make the regular flags. but I'm about to start making them waving ones also. they look awesome.

My friend Jim did one of those years ago they come out awesome

This is beautiful! I really love it

I think that’s truly excellent! Well done! Bob England

Great video Max love that flag. I’ve done a couple, I don’t glue the boards I clamp them and then carve the waves and sand then stain and then glue. I like to mark up the stripes also before I glue them. Thanks for another great video.

Beautiful man! Well done.

Great video! Thank you Max!

that's great! def on my list of things to try :)

Great looking project

I love it , good job.. keep up the good work..!

That turned out very well!

Man, you do some awesome work! About how long does it take you to carve out the stars ?

That's beautiful. Great job man

Fantastic I am looking at getting back into woodworking, this would be a fun project

It's Beautiful!

On the Punisher one I was going tosay I like how you can see the wood in the back.

I thought this was done with a CNC. Good on you. Great project.

Looks amazing! Nice job❤