Love watching a young dude grow his company. Proud of you sir.

Every video it's looking more and more like you're running the tree service you said you didn't want 😂😂😂

Been running a mini ex in similar work for 4 years. 8,200lb Deere 35G. You made the right decision for you. Reasons I chose an ex and you should not have: I work exclusively in rural areas. Get the tree down. Buck it for firewood for them. Stack that wood at the edge of clearing. Dig burn pit, stack and burn the brush, grade their yard flat. It half tree work and half clearing. I’m always in yards I can destroy and grade/seed. I’m always at the base of the tree with a machine. If you need to carry debris 30+ feet to a chipper, and you need to worry about residential lawns, you do not want an excavator.

I love how positive and humble you are. You always realize that there is much to learn, even though you are a professional. Well done!

I love your Reon Rounds mentality when it comes to running business. Invest heavily in equipment, rather then lots of people. Having a few guys that are properly trained is so much more better then lots of people and less equipment. Good job buddy!

Guilty of Randy video today YES 🤣🤣🤣🤣🤣

Nice to see you found a good machine for your work. I’ve had a 520 for 12 years in private use and I have several attachments for it. I dont’t have a grapple like you have. You seem to have the extra side weights. With those that machine is about 3500 lbs (1600 kg). My 520 has extra back weights and with those it is about 2900 lbs (1300 kg). I lifted and moved a solid piece of rock size of 5` x 2` x 1` weight over 1700 lbs (1,5 x 0,6 x 0,3 m3 about 800 kg). Avant is a strong machine even it is quite small. It is heavier than it looks because the steel plates it is made of are quite thick. It can turn around in very small place. You have to use reverse though. If you have slip lock turn it off on asphalt. Because you sit in the front unit it feels sometime very awkward when you go reverse and you have to turn the steering wheel. At first it feels like you turn to the wrong direction when you yourself move to the opposite of where you want the machine to go. You get used to it eventually. Happy hours with you Lil’ green monster.

Back up off to the side of the chipper arcing your butt end away from the chipper. As the pieces get close to the mouth of the chipper tilt the bucket down so the tips drag and pull the branches inline with the feed tray. Stop. Move forward and towards the opening of the chipper. It also helps if you start with the boom extended on approach and them suck it in while driving forward and feeding it in. Im really good at driving these things. My coworker is better. This is how we do it. Process huge trees in an hour, hour and half. Your driving straight in and jamming it in is going to break your machine and your chipper. Know from experience

Hi Jake, I’ve been watching you since your old channel/Eastside days. It’s been great to watch you evolve: A. Starting basically from scratch with a new channel B. Contract climbing/traveling and your own local jobs C. Starting Sappy Supplies D. Building/changing your business with new equipment Thanks for all of the wonderful videos throughout your journey, especially ones with Randy…You give a retired guy like me something to look forward to watching. It’s a pleasure to watch a young man with so much initiative and drive (Two qualities missing in most your age). Stay safe Mark K

I've been watching you since 40k subs. The way you've grown is amazing and you're one hell of a owner and worker. You deserve it brother

been a climber for 22 years and a company owner for 15. bought a case w4 with a full cab 12 years ago and had an adapter made to accept all bobcat attachments. This has been one of the best purchases i have ever made, the machine weighs just under 5k lb and lifts 3k with properly stacked brush i am able to load the chipper easily with just a set of pallet forks and the articulation of the machine. total game changer, been running a two man crew ever since.

Now you’re thinking, the less workers comp. The better. You are gaining a great deal of wisdom. Glad you are having children,this country needs more people like you and Randy.

you will love the avant, so many attachments. I have a 745 and the weight it can lift is insane.

it’s good if you drag straight back , back of the machine to the chipper and then right before the hopper take a sharp turn, place the butts on the hopper and then articulate away from the chipper , grab the pile, and then articulate towards the chipper and it feeds like butta. looks like you’re feeding too far away or head on. too far away gets annoying with lining butts up and head on I always catch the feed bar

Ooh that's cool. I've had a 530 with a closed cabin for a few years. Very dependable as long as you take care of them.

You can attach weight on the back of the avant. It will lift way more then. I Have lifted around 600kg with the avant 520 that way👍. the avant is strong enough but the back will lift up pretty easily without extra weight

So cool to see you doing well since going at it alone

Might be talking out of my arse, but I wonder if it would have been better to start at the far end of that first pile. More room to complete the turns and straighten out. Either ways what a cool combo you guys make.

love the videos! Ive recently started doing videos for m y company as well pray for all the grouwth for you and your crew this season god bless

If you only had a ground guy as good as Felipe!!!

Not even a tree guy and been watching you from the start, awesome to see your drive and how much you’ve grown. It isn’t unnoticed. Running a business is hard and you seem to be doing an awesome job! Keep it up man!!

Great too addition to the crew.

Looks like an elongated feed hopper would be useful for the chipper loading. I've been watching you since your Eastside days so I'm glad you are building your own business.

Maybe try reversing alongside the pile, forward approach to grapple, then drive toward the chipper to feed. I was in a similar situation recently! Fine job regardless!

Love how you dropped the first load 😂 after talking it up life’s great at humbling you

I’m so excited watching your come up man I’m so proud of you

Man I just hand loaded an entire water logged ginormous walnut and then hand unloaded it. I’m 37 years old and I am starting to understand the quote “I’ll never do manual labor again” lol great work ! A small business inspiration!

Great job Jake... happy for your new Avant.... Great that Randy has that big chipper now.

Congrats on the new machine!

excellent job guys. not a bad job for 1st use, so the more you use it, the better you'll be at it. way to go Jake

Each day gets a little better keep it up young man when I was your age I had a plumbing company and service the area you’re in now I’ve been retired and moved to Eastern Washington many many years ago

That is awesome, Love your channel glad you are back!

Exciting milestone! Can't wait to see your first job with the new Avant 528 loader.

Congrats on an AWESOME purchase Jacob!!!! 👍👍 ....... Kind of wish this could be more useful at my job... I work golf course maintenance.

Nice addition. Learning curve is real. Nice work

It’s awesome how you’re growing. Machines are making our jobs so we can do them for many years to come. I chose a giant because the steering actuates the front instead of the rear so I could pinpoint the grapple better and it doesn’t have plastics. If you’re in North Carolina, feel free to reach out. There’s a few guys around here that you’d probably enjoy working with.

Love the content boys, keep it up! Also, congratulations on 1.2 mil subs, that’s impressive

Good buy Jake! We've got one here in Invercargill New Zealand. We have the bucket and the grab as apposed to the hanging grapple. Works well on flat ground, steep slopes it doesn't like so much, otherwise such a great machine, pays for itself so fast. Great to see your progress bro!!

Another Great Video Jacob Nice New Edition of The Avont 😮

Enjoyed the video. Nice addition to your tree service arsenal.

Great vlog love the Avant brand have used the 600 series as a friend of mine has one but hopefully on Friday will have a couple of items from Sappy supplies all the way over in little old U.K. but great vlog Jacob especially with Randy the Mandy 😊😊😊

Love having the avant on jobs, great machine, a friend I work with had one and it is great, very versatile!!

Good job Jacob and keep growing! You make wish I was young again! Tree work is HARD work but it's fun and rewarding! I love your new toy! :)

I just saw you pop up on Blacktail Studio's channel! The latest video on 4/4 @ about 13 min.

such a motivating attitude! onto the next one

You’re going to love your Avant. Out of all the brands we sell, Avant is my absolute favorite. They are great quality and the aftermarket support for service, parts, and warranty is light years ahead of all the other brands.

Game changer had 3 avant already the 755i is a beast

Cool bit of gear 🥳😎 good job

😂😂Aaaaah at last. You shouted Timber!!. That's made my day. 🤪

Hell yeah buddy. Try putting it forward on the trailer so the weight is over the wheels of the dump trailer. It will ride a lot better Especially if you bring it on the highway.

Ive been waiting for this one 🤘🏾

Love the kawasaki green

That is so cool. Nice trailer by the way.

Any machine is better then no machine definitely saves your back love the videos I’ve been doing tree work for about a year now

Yes nice set up

Looks good Jacob 👍🏻

congrats for the new truck :D

Was not expecting the the millennium falcon reference 🤣🤣🤣

My business partner and I picked the same machine for when we wanted to increase production. We usually can knock out several trees between the two of us. Pro tip: we had the same issue with the back weight kit hitting our ramps when loading or unloading. I took two scrap pieces of pressure treated 2" X 10" roughly a foot long and screw two of them together. Set the pieces under the ends of the ramps and it will decrease the angle of them so you dont hit the back end.

Hell yeah dude definitely pumping me up

Very jealous - would absolutely love one of these. Looks awesome 👌

23:05 randy!! I got that full house reference 😂 sing it baby!!! FOR SOMEBODY WHO NEEDS YOU! EVERYWHERE YOU LOOK EVERYWHERE U SEE, IS SOMEBODY WHO NEEDS YOU!!! 🎵 🎶 🎙️ 🕺

This is the best avant video that’s for sure

Bad news for you! I have the same unit purchased a few months ago and they no longer have heated seats. If you have a black seat like yours it does not have heat. They removed the heated seat but did not inform dealers. I went to my dealer and they spent a few hours trying to figure out why it didn't heat. They contacted their supplier from Avant and they pulled the heated seat. Its nearly impossible to get a heated seat now. You could have been one of the lucky few but from what my dealer and I can find the vinyl seats are no longer heated but they did not remove the switch or wiring! But I still love my Avant

Congratz ! so nice to see you growing!

we need a 4 stroke chainsaw test!

I've got an s70 wheeled bob cat with there grapple attachment. Thing saves the day

Thats the tiniest wheel loader I have ever seen. I love it

at my job we had one of these but a weidemann,we used it to lift big metal gates, great machine.

So -when do you and Randy just merge into one company? Randy did predict that you would start small and eventually get all of the vehicles you would need for an actual company.

Randy sounds just like Erich Bachman on Silicon Valley the TV show, it's hilarious that he is also comically gifted!

love seeing the progress with the tree service Jake! We went with the bobcat articulated loader. Love it. Need to go see Reon and Filipe for a masterclass on the avant!

The Avant Savant!

Good on ya

Good Job Guy's! Don't worry you'll get it.

Next time same setup back up from the chipper pull into the pile then back out and pull down to the chipper then back all the way down from chipper to pile and repeat saves an entire turn around and sets you up strait on. Then you will get used to using the squirt out and rotate function mush faster setup

So much room for attachments!!!!

Nice machine man, i think another spot the mini skids shine is going backwards easier to look behind you, but yea id love an avant, so i use an f550 landscape dump and pull a flatbed trailer witb the skid and the grinder on it, solid unit wood and mulch load easy with the skid in the trucks duml bed its got the sides that fold down, then of course standard chipper and chip truck, it took me awhile to get this set up like it is but its super efficient, 2 drivers can tackle any job needed with all equipment there

Very cool unit 👍

Man oh man, would i love to do a rescue on that kenworth! Anyway, awesome to see you doing great Jake! (Randy too!!!!)

Jake you mentioned the controls are different. On excavators you can change the pattern.So I think you should also be able to change the pattern on that machine as well.

Pull up from the side and as u swing the boom into the chipper release the grapple

Oh Wow we the Lago king King Randy 😮🎉😂😂😂😂😂

You guys rock

Congrats on the growth, hope the machine works well for you. Is Randy ok? Looks like the Cinnabon Grapple is taped up.

Amazing brother! Great to watch you grow. That thing looks like it needs a counter weight though right? The back tires were constantly bouncing up and down. Thing would drive so much better if it were balanced somehow

Get in there

Everything is a learning curve !

When the branches are all throw together like that it makes it tough when grapple only so big… could try going into piles grab some and just go a lil bit from the pile and start a new neat one, so that way you can grab a big pile when your making the trip to the chipper.. if that makes sense?? Just making every trip count by taking the throw together/messy pile, into a nice pile where ya can get a full grapple before making the trip 👌🏼👌🏼👌🏼 like ya would w an excavator since it’s so much slower, make every trip count🤘🏼🤘🏼

Jake I'm your biggest fan I've been watching you ever since you worked at Eastside can you please test out the former tech 888

it took me quite a bit to get good at using a grapple like that but ive only used one on a mini skid. ares didnt rotate on its own though it jus was free spinning. its alot easier if its all stacked the same direction but one its a random pile it can be a pain in the ass to stuff into the chipper. and we have a 20 inch mobark that will eat trees lol honestly what we use the most is just the skid loader with a grapple/bucket on it. ive gotten real good at stuffing the chipper with a skidloader. cant drive it on yards though is all unless you dont turn at all if you do it will destroy the grass lol

Congrats on your purchase Guilty of Treeson, hopefully you like it! I felt it would be easier to do this job with a mini skid but I'm biased because that's what I have.

I would suggest to reverse you ramps so v -on the ramp facing upwards, it als gives extra clearances . Check it out.

if you ever end up working in the snow you will really be glad you have wheels because, with a good set of snow tires, it will run circles around anything with tracks, rubber, or steel

Nice Jake ! Going to need another trailer so you can haul away the wood and your equipment without making multiple trips .

You need to watch 'The Castle' , classic Australian humour at it finest. So many great one liners.

Seems like a good asset to me 💪

Best investment ever.. be mindful of tipping the Avant on its side.

I would choose the avant I love the mini skids but they are limited the avant just is smooth and incredible to use

Have you found an employee yet? I almost moved there from Kentucky to Orkin with you no joke. I use to work for a tree service here in Kentucky called Wrights tree service as a B man climber. Then I found out I had cancer in my head and neck and thy set me back for a while. Been in remission now for 8 plus years and now I’m trying to grow my house painting/handyman business, butIt would be an honor t work along side you and I would move in a second to help you grow your business buddy..Also I enjoy making KZfaq videos and like to edit too lol