My jig system for the xTool F1

Рет қаралды 4,350

2 ай бұрын

After using my F1 at an event, I decided that a jig system was in order. I began designing the system at the event and used it there. I have now completed the system and will be including many of my popular items in the system. Links to these items are below.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers as well as CNC project files.
theclackshack.etsy.com
xTool F1 jig system- theclackshack.etsy.com/listin...
For Clack Shack shirts, click here-
www.thisandthatvinyl.com/prod...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...
xTool-
www.xtool.com/?ref=TheClackSh...
Bamboo ink pens- amzn.to/3JymdBD
Bottle openers- amzn.to/4abpQIF
Assorted wooden key chains- amzn.to/3WildZH
Round tags for pets and etc.- amzn.to/3WlBmxB
Bone shaped pet tags- amzn.to/3JFlgaF
Assorted color dog tags- amzn.to/3UgpNoS
Black business cards- amzn.to/44pMkUP
‪@xToollaser‬

Пікірлер: 84

@budgetmerch 20 күн бұрын

I bought the F1with the slide extension and air filter the other day and it was bundled with the RA2 Pro and a 10 watt D1 Pro so I bought your F1 files, as I did when I got my other D1 Pro. Just opened it and I'm setting it up now. These files will get me started nicely - thanks for creating them.

@TheClackShack 20 күн бұрын

Glad you like them, they make things easier.

@kylerayner8565 Ай бұрын

Are you kidding me🎉 I feel like I’ve now hit the jackpot. Thank you Shack

@TheClackShack Ай бұрын

Thanks... Maybe you have.

@shellyjorgensen2441 29 күн бұрын

I purchased your jigs for the F1 and they were great. I'm now using them to make jigs for other things. They fit perfect. Thanks!!

@TheClackShack 29 күн бұрын

Glad you like them!

@aaronmay5278 29 күн бұрын

Beats the heck out of my lego jigs.

@TheClackShack 29 күн бұрын

It works pretty well.. thanks

@djs7515 2 ай бұрын

You can batch it out when the job is done just hit the button on the side of the F1 twice and it will run the same job again

@TheClackShack 2 ай бұрын

I swear I tried that... Have to try again. I would still like a counter like other galvos have.

@jasonhoffman254 2 ай бұрын

@@TheClackShack It has to be a quick double tap....

@TheClackShack 2 ай бұрын

@@jasonhoffman254 apparently ,,,lol

@markcall9695 20 сағат бұрын

BRILLIANT!

@TheClackShack 18 сағат бұрын

Thanks

@bryangravely 2 ай бұрын

As others have said, double pressing the start button does batch items, immediately re-running the same burn. It has to be a quick double press. If it's too slow, it'll just pause and un-pause the machine. My problem is that it tends to jostle the machine and items on the bed, which won't be an issue using the jigs like you have. They're selling both a button and foot pedal that will move the functions of the button off of the machine so it won't jostle. I've pre-ordered the button, should be shipping in the next few weeks.

@TheClackShack 2 ай бұрын

Yea, my presses are too hard also.

@donaldlynch6559 2 ай бұрын

Really enjoy watching your videos. You make it feel like I’m right there in the shop too

@TheClackShack 2 ай бұрын

Thanks, it is a little cramped in here isn’t it…lol.. trying to convince my wife that I need a bigger shop

@ufoquilter86 2 ай бұрын

Those little tags look good enough to use on a custom handbag even

@TheClackShack 2 ай бұрын

One more use... There are many..

@OneStopTC 2 ай бұрын

Rad! Excited to do these!

@TheClackShack 2 ай бұрын

I like them... Thanks.

@mikewilliamson1539 2 ай бұрын

Very slick, I like it!

@TheClackShack 2 ай бұрын

Much appreciated! I like it..

@RoseKindred 2 ай бұрын

Wow, I don't have an F1 but that looks amazing. You made them well and this whole set up looks perfect.

@TheClackShack 2 ай бұрын

It is a keeper for events for sure. It makes small engraves a breeze.

@RoseKindred 2 ай бұрын

@@TheClackShack It seems like it. I don't have a business, yet, but watching how much this tech has progressed in the last couple of years, I am surprised at what you all think up to create. When I first got into lasers it was large CO2 and less than 2watt diodes. So I went 3D printing, ha.

@TheClackShack 2 ай бұрын

They are getting more advanced weekly. Sad to say that my first laser from 3 years ago is now just a "keep sake" hanging on the wall. It does still work though...

@commonsensepatriot9450 Ай бұрын

Great video! Thanks.

@TheClackShack Ай бұрын

Thanks

@cubansli3099 2 ай бұрын

I like that Thanks, I just can’t keep up with all the stuff xtool has to offer. Great Video Sir.

@TheClackShack 2 ай бұрын

They are evolving fast..

@cubansli3099 2 ай бұрын

@@TheClackShack Yep

@jamiekitto7778 2 ай бұрын

Xtool now sells a batch footswitch for the F1. Also, the IR preheat default is “off” and turns back to “off” every time you close XCS. I’ve been caught so many times not turning it back to “on” when opening XCS 😉

@TheClackShack 2 ай бұрын

The foot switch would be cool.

@joegadget670 2 ай бұрын

Those jigs are great. For someone new, it may be helpful to write the specific engraver settings on each jig.

@TheClackShack 2 ай бұрын

There are lots of colors and preference of looks to consider. It would be a lengthy list.

@Chris-wl4sd 2 ай бұрын

I have been doing something similar, a couple of things I think I have discovered, the F1 can cut larger than the metal insert, I have been able to cut templates that are a snug fit using the F1. Second, I bought an assortment of M3 screws on Amazon, I prefer having a couple in place top and left then butting the template up to the screws, I find it easier than popping out the metal tray thing. Great video, really informative!

@TheClackShack 2 ай бұрын

There are lots of ways.

@kimdentolley5952 Ай бұрын

i seen on etsy the jig set. anything in future where you offer also, buy the jigs from you? I have the f1 but not anything else i can make the jig. would love to just be able to purchase through your store the jig itself. love your channel!!

@TheClackShack Ай бұрын

I have several files but not many that small. Thanks

@greatsounds Ай бұрын

Thanks for the great video. I bought your files and am going to make them this week. I had a major issue with my F1 at my first outdoor craft show. The sunlight triggered the flame detection sensor and kept beeping and stopping the framing process. Have you run across this? Or found a solution? Thanks, Chad

@TheClackShack Ай бұрын

You should be able to disable the flame detection in xcs

@TheExtremeElementz 15 күн бұрын

Good Morning Sir, I am entertaining starting a side business to make some extra cash to help support my family and wondering if the F1 would be the tool to start with? The print area seems small but like you’ve mentioned in a few other videos it’s the small stuff that sells. I was thinking of starting with engraving as my first offering with the business so that’s what lead me to the F1. I can’t afford the F1 Ultra, do you think the F1 would be THE tool to get to start the business and get my foot in the door? Thank you for your time and video creation I enjoy watching them.

@TheClackShack 15 күн бұрын

I believe that most any tool can be used to make money with the right approach. I recommend figuring out what you plan to make and then selecting the machine that is best suited for that. I can tell you that there are some bigger diodes out there for similar price that would give you a bit more capacity. They wouldn’t be as portable if you plan on doing shows.

@TheExtremeElementz 15 күн бұрын

@@TheClackShack thank you for the response. I really think (as much as I wouldn’t want to lol) going to the shows would be the fastest way to get my name out there and make money. Portability at least initially would be a big selling point for me. I’m sure people love seeing the laser do its thing so the fact that it’s enclosed keeping everyone safe is a good thing too. Thank you again for responding. Cheers from Wisconsin.

@nathanwolf5547 2 ай бұрын

I’m glad you like the F1. It’s been a great learning tool for me. I’m considering an Atomstack 70w now. Would you think that’s overkill?

@TheClackShack 2 ай бұрын

I like mine so far, it specializes in cutting. It still does a good job engraving also.

@marcgriffis5619 2 ай бұрын

Thanks for another great video! Do you have a video on how to create a jig? Thanks 👍🏼

@TheClackShack 2 ай бұрын

Several, just search my videos for jigs.

@collimic 2 ай бұрын

It would be really nice if you could create an 3D printer STL for the jigs.

@TheClackShack 2 ай бұрын

There are some others out there that have. To me, the laser cut are just cheaper and quicker to make for most folks.

@nathanwolf5547 2 ай бұрын

You should be able to repeat the last jib by pressing the start button on the machine. Unless they too it out in V2?

@TheClackShack 2 ай бұрын

I called myself trying that. Gonna have to test again.

@dnecey32 2 ай бұрын

what thickness of wood are you using to make the jigs? I used 1/8 but the depth looks deeper then yours

@TheClackShack 2 ай бұрын

I use 4.5mm to cut them. Sometimes I use 3mm spacers in the holes. Just use some thinner material and cut the hole shape from it.

@tomlastrange 15 күн бұрын

I’ve gotten very comfortable using Lightburn with my Roly Lasermatic mk2. Does XCS work better and do you recommend it over Lightburn with the F1?

@TheClackShack 14 күн бұрын

It will work with either but the multiple canvases is a nice thing when doing events, it makes swapping items much faster. It also will work over WiFi where lightburn can’t.

@tomlastrange 14 күн бұрын

@@TheClackShack Thanks!

@larrycwill Ай бұрын

Can the F1 engrave on the blades of pocket knives?

@TheClackShack Ай бұрын

It can mark stainless and remove coatings, the depth is very limited with 2 watts.

@collimic 2 ай бұрын

You can do a batch job by double pressing the button.

@TheClackShack 2 ай бұрын

I need to bolt it down to keep from moving it though.. Not a fan of the way they set that up.

@johnnyditommaso6807 2 ай бұрын

I use Lightburn for my F1. I can't stand XCS! Do you have the files for the jigs for in Lightburn?

@TheClackShack 2 ай бұрын

The cut files are in lightburn format. It is the same shapes but I haven’t laid them out in the work area.

@edpeyregne 2 ай бұрын

What thickness are the layers of the jigs?

@TheClackShack 2 ай бұрын

I am using 4.5 but it really doesn’t matter

@64hah 2 ай бұрын

Hi , how do you do the canvas? Thank you.

@TheClackShack 2 ай бұрын

Not sure I am following, you just select a different canvas

@monicasaenz9139 Ай бұрын

I purchased this set on etsy. Is there any way i can get the files in svg format?

@TheClackShack Ай бұрын

What software are you using?

@seanfreeman7029 2 ай бұрын

how do you power your F1 When you are doing an event

@TheClackShack 2 ай бұрын

Either wall power or my quiet generator

@kevinrich4637 2 ай бұрын

Just curious…is there another diaode IR laser that you like?

@TheClackShack 2 ай бұрын

There are a few companies that make them. I have only used the F1. Longer also makes a head for an open gantry.

@kevinrich4637 2 ай бұрын

@@TheClackShack thank you sir

@kevinrich4637 Ай бұрын

@@TheClackShack I will be interested in hearing your thoughts on the new F1 Ultra. Peaked my interest

@TheClackShack Ай бұрын

@@kevinrich4637 maybe i can

@michaelpierce3641 19 күн бұрын

Hey do you have a jig system for the Xtool F1 conveyor?

@TheClackShack 19 күн бұрын

No, sorry. Samcraft does

@chuckpederson6754 2 ай бұрын

No secant guessing with a jig

@TheClackShack 2 ай бұрын

That's right

@djs7515 2 ай бұрын

Hit the button twice fast

@TheClackShack 2 ай бұрын

If you want... lol