My Loaded Toolbox Tour As A 3rd Year Diesel Mechanic And Tool Addict!

Рет қаралды 8,166

19 күн бұрын

#toolbox #tools #snapon
A full toolbox tour of my new Sunex Service Cart and My Mac Tools 42-inch toolbox. A mixture of tools from Snap-on, Matco, Mac Tools, Harbor Freight, and more! After 3 years in the field, a lot of you have asked for an update on my toolboxes. Hope you guys enjoy it!
The Sunex Service Cart Sales for around $1000!
Magnetic Power Tool Boots:
(Discount Code - " EZTECH ")
www.stsautodesign.com/
QRT ORGANIZERS:
(Discount Code - " EZTECHJOE10 ")
7dffcb-f2.myshopify.com/?ref=...
OTHER TOOL LINKS: linktr.ee/eztechjoe
EMAIL INQUIRY: Eztechjoe@gmail.com

Пікірлер: 95

@richardbates2367 13 күн бұрын

Craftsman v series,facom and Mac precision torque and knuckle savers i would love to eventually acquire a set of the Mac precision torque wrench sets

@richardbates2367 13 күн бұрын

You could always use a Christmas tree step bit and drill a hole at the bottom of the cart so your 36 inch long pry bar will fit in the box and close the lid and then use some rubber heater hose, radiator hose,or some sort of grommet on the hole you drilled out

@clinte14 13 күн бұрын

Yes I did this with my Homak roll cart 😊

@EzTechJoe 13 күн бұрын

I've been considering it

@cblack1863 13 күн бұрын

Drill a hole in the bottom for that biggazz prybar! Stick a rubber grommet in there and it'll look factory👍 Nice setup man, solid choices!

@EzTechJoe 13 күн бұрын

🤔🤔.. that might just work. Appreciate it man

@cesare8270 12 күн бұрын

@@EzTechJoe We just loop a zip tie loosely around the handles of our tool boxes and use that as a holder for the larger pry bars.

@EzTechJoe 12 күн бұрын

@@cesare8270 ohh that's innovative

@twostroke12v71 17 күн бұрын

This is my ASMR. Much appreciated

@Bizkit-ey8tw 15 күн бұрын

Nice video! That Expert brand stuff from Mac is really a good deal. Im blessed to have a good Mac guy and I buy quite a bit of the Expert stuff.

@EzTechJoe 15 күн бұрын

Same here!. It's all about the dealer for me!

@allphasestech 16 күн бұрын

Looks like you've about got it covered! Good introduction for me to your channel. Thanks for the video. 💯

@EzTechJoe 16 күн бұрын

Hey thanks man!! Much love!

@richardbates2367 13 күн бұрын

I bought a sunex 1120 ss 20pc black with red comfort grip handle screwdriver set with tray from Amazon like $65

@Bloodsong0830 9 күн бұрын

You can buy new cases for the batterys too, I know besides the point

@kdtxtoolreviews1084 17 күн бұрын

Awesome tool box tour brother! Thanks for sharing! Definitely better set up on this service cart than the 5 drawer cart for sure 👍🏼💯💯💯

@EzTechJoe 17 күн бұрын

Thank my man!!

@vig37 16 күн бұрын

@@EzTechJoe yeah man, that roll cart is nice. So is your big box, but I like that roll cart setup because it's more affordable.

@larryharry7221 13 күн бұрын

Nice setup.

@EzTechJoe 13 күн бұрын

Appreciate it💯

@IMPACTRATED 17 күн бұрын

Awesome tour bro!! I just got that us general cart around same time as u, now i wanna upgrade to a bigger cart😂

@EzTechJoe 17 күн бұрын

🤣🤣🤣🤣🤣🤣. Mannn it be exactly like that bro

@mlieser1230 17 күн бұрын

I have the Thinkwork extractor sockets. They work great.

@kristianarnold3165 16 күн бұрын

I got the 14.4 stuff I have everything they make and man it was expensive getting there but I love how the batteries are ,style the way it clips in everything 😊

@EzTechJoe 16 күн бұрын

Yeah those batteries are hard to get out. They snap on really tough

@ryanmusante 17 күн бұрын

1 of my Dewalt 12v batteries did that same thing but not as bad as yours, it still works and will pop back in enough to use it and not pop out really. I cant complain though, Ive got a good 5 years heavy use out of it..

@Nordman555 17 күн бұрын

Love ur videos

@EzTechJoe 17 күн бұрын

Appreciate that!

@salstoolsandvlog 16 күн бұрын

I don’t care what you mama says 😂😂😂😂😂 love the videos bro 💪🏼

@EzTechJoe 16 күн бұрын

Lol. Appreciate that man!

@Ninersfanatic79 17 күн бұрын

Nice box, but wanna say Thanx. Been waiting for u to do a tour, and for some crazy reason I'm addicted to box reviews n tool reviews. I'm guessing its 2 see what I need to add to my inventory. I'm still waiting to pull the trigger on a box n Sunex is in the running.

@EzTechJoe 17 күн бұрын

Aw man that great man and thank you as well! Same here. I have a entire checklist from watching other toolbox tours

@kevin1kraemer1 19 сағат бұрын

You’re a funny dude , good content

@EzTechJoe 14 сағат бұрын

Thanks man! I appreciate it! 🙌🏾

@scottaddison8071 17 күн бұрын

That’s nice that Empire provides that beautiful MAC Edge toolbox for you

@EzTechJoe 17 күн бұрын

Oh no I don't work at Empire lol

@scottaddison8071 17 күн бұрын

That looks like an Empire shop

@jamesridley1437 17 күн бұрын

I was thinking the same thing

@scottaddison8071 17 күн бұрын

@@EzTechJoe are you in Mississippi, Alabama or Louisiana?

@JayBird911 17 күн бұрын

Great setup! Thanks for the vid. Edit: can you pop the astro nano's into any 19mil (assuming they're 19mil?)or is it proprietary to their stuff only?

@EzTechJoe 17 күн бұрын

🙌🏾🙌🏾

@AndyCrumbaker 13 күн бұрын

I’m thinking about instead of the 5 drawer USG 30”, getting the 34” 6 drawer full bank USG. I don’t really need either one of them, I’ve already got a 42” roll cab and top chest combo and a 56” roll cab and top chest combo, but I kinda want one.

@EzTechJoe 12 күн бұрын

It will just give you an excuse to buy more tools to fill up the space lol

@AndyCrumbaker 12 күн бұрын

@@EzTechJoe haha I don’t need that excuse, both those boxes are full and an old 26” craftsman top and better I have off to the side is full. It’s a problem really

@EsraDemir-c2h 3 күн бұрын

It's a great video.

@EzTechJoe 3 күн бұрын

Appreciate it

@AdriftAndAtPeace323 17 күн бұрын

Nice! Come a long way since your first upload. The dewalt battery, you might be able to find a replacement clamshell for relatively cheap

@EzTechJoe 17 күн бұрын

Yes man thank you! And I think I'm going to try that to. My Mac tools dealer brought that up as well

@vincenthardy9863 17 күн бұрын

Big dawg done came up 💯

@EzTechJoe 17 күн бұрын

Man🙌🏾 appreciate it bro!

@TheRealBSi1 17 күн бұрын

It’s a good idea/ best practice.. to keep the batteries ‘out’ of the snap on tech angle torque wrench , when you are not using it ! 🛠️🤙🏼

@EzTechJoe 17 күн бұрын

Yeah, i do sometimes. Other times, I just leave them in. I'm going to eventually get rechargeable batteries for it

@TheRealBSi1 17 күн бұрын

It’s not about the batteries going dead .. it’s about preventing corrosion inside the body of the torque wrench. To prevent premature wear of the contact points inside the wrench!

@EzTechJoe 17 күн бұрын

@@TheRealBSi1 oh that's good to know!

@JSTruckRepair 17 күн бұрын

I’ve had my digital torque wrenches since 2018 and I’ve only used energizer batteries and replace them once they are on 1 bar of life left. Never once in 6 years have I had an issue leaving batteries in. But I assume if you use junk batteries or don’t use it enough to replace the batteries fairly often corrosion can happen. But in all seriousness if you have a new torque wrench that’s still in its warranty if there’s bad corrosion inside the battery compartment snap on will void your warranty fix

@vig37 17 күн бұрын

My original batteries are still in my two 1/2 and 3/8 Snap-On Techangle torque wrenches. The half was bought in 2014 and the 3/8 was from 2016. I always take them out. I've seen electronics where great name brand batteries leaked. I'm not taking a chance. This is what I do and best practice is best practice. But, by all means It's your money, do what you want.

@georgerenolds859 17 күн бұрын

got the same sunex box and loving it so far a lot better quality than harbor freight like that it has the handle detents for the slides sense my shop isnt level nice setupp thoo

@Nordman555 17 күн бұрын

Get some crazy glue on the 12v. For the price i believe dewalt ratchets are the best.

@ivanowskimendoza483 16 күн бұрын

Is that sunnex cart nice and level? Wondering been thinking on buying a cart.

@EzTechJoe 16 күн бұрын

Yes it is. Haven't given me any problems as of yet

@kevinmeraz1566 16 күн бұрын

How are the pittsburgh locking extension holding up?

@EzTechJoe 16 күн бұрын

They never gave me any problems man. If I upgrade it's because I want to, not have to

@cleasonleasure4832 17 күн бұрын

Hole saw that bottom frame out.

@chryslertechnician3439 17 күн бұрын

🔥🔥

@Supra_Mickey 17 күн бұрын

Think my only issue with the sunex tool cart it’s a bit pricey for not being a truck brand box

@gregblau8082 17 күн бұрын

I tried ordering that cart a couple times, but they kept being cancelled as back ordered, so I paid a little more for one that says matco. The only thing I don't like is how it wanders when you push it.

@EzTechJoe 17 күн бұрын

Yeah that's true the boxes are a little tougher to get a hold of a little bit. At least these particular ones. The green and orange tool carts have been a limited time order. I think they brought it back 2 or 3 times

@JoseLopez-eo4eb 17 күн бұрын

Awesome where can I buy this sunex cart ?

@EzTechJoe 15 күн бұрын

The green and orange versions of these carts are limited time only, supposedly, but they do bring them back often.. You can find them and their regular black and red versions on Summit Racing, JEGS, and Paul's Tools. And I hear they should be at ACME Tools soon as well.

@Bloodsong0830 9 күн бұрын

I keep breaking my Milwaukee batterys and Holly fuck it's annoying

@garrettmiller8449 17 күн бұрын

Snap on does not warranty batteries.

@EzTechJoe 17 күн бұрын

And It's only a 1 year warranty as well 🤦🏾

@simo8145 17 күн бұрын

I could never keep my toolbox open and unlocked😂 never trust those salesmen

@EzTechJoe 17 күн бұрын

🤣🤣

@hometownfishball7239 17 күн бұрын

That's what a true mechanic's tool cart supposed to look like. Sockets on top along with an impact gun, Not like some other ppl having only sockets on top and all ratchet & impacts some other places

@Nordman555 17 күн бұрын

Yah ok...

@victorhoyt4352 15 күн бұрын

What does that even mean? How does a "true mechanic" have all the sockets up top, but a non true mechanic have impacts somewhere else? If you have all your sockets up top, how do you have impacts somewhere else? Sockets and impacts are the same thing... You either have all your sockets up top or you don't. If you have all your sockets up top, then you have your impacts up top too. There's no such thing as a real mechanic organized box. Each mechanic has their own style and their own way of organizing.

@hometownfishball7239 15 күн бұрын

@@victorhoyt4352 I said sockets and impact guns, not sockets and impacts......I have seen people having only sockets on top and their impact guns at the very bottom drawer and their ratchets in some other drawers. In real mechanic life, for efficiency, when you grab a socket, you will grab an impact gun or ratchet as well No?? What s the point of grabbing a socket on the very top then bend down to the very bottom drawer to grab the impact gun???

@victorhoyt4352 15 күн бұрын

@@hometownfishball7239 re read your comment bro. It definitely says sockets and impacts. Not impact guns. Btw, they are called impact wrenches and impact drivers. Not impact guns. A "real mechanic" wouldn't call them impact guns... Also, if you watched his video, you would have seen his bottom drawer slap full of power tools. So I guess he's not a "real mechanic?"

@hometownfishball7239 15 күн бұрын

@@victorhoyt4352 My comment here is only to show appreciation to this youtuber. not to go through every single word with anyone else. If you dont understand, it s ok