Next episode, ‘best 1911 for German shepherd’

😂I already have some regrets about that statement.

I thought a 16-inch would be all I needed. 🤣

@@MF-Rell lmao same bro, my first rifle was a SCAR 16 and I was like "I dont need anything else!" .... 12 uppers and 6 rifles later...

@Hannibal Barca IKR. I have 5 and am looking for 2 more uppers or barrel swaps. 13.9 and a 20 inch. Don't really feel like dealing with the tax stamp. 😕

Just get different uppers lol

That is awesome!! I have yet to tinker with adjustable gas block. I’m glad you found something that works! I will definitely check it out. I am just having a hard time accessing the bolt release button with my right hand with the adac lower. Partially because the 14.5 I have right now is a bit front heavy. I was planning to switch out the upper with my 11.5 and make it a pistol again and see if it helps. Someone suggested a k2 grip in the comment as well so I will try that out. I really appreciate the suggestions! Been learning a lot from reading all the comments. Have a great day my dude

Lits git it!!! :)

The Daniel charging handle sucks compared to a geissele or a radian, unless the one I used was faulty.

@@manny45629lol you’re not the only one that says this. I myself was about to buy the Daniel defense but I did my research and multiple people most of them said the same thing compare to Radian raptor the radian raptor worked better. I ended up buying a blem radian raptor since they’re only $80😂

No modification. You can buy the whole upper straight from geissele. Mine just didn’t come with a bolt carrier group so I used bcm:)

:O how is the Yankee Hill working out for you? I am curious about the amount of gas blowback. Do you have to do any modifying (i.e on the charging handle) or is it pleasant enough that you can just tough it out? We basically have the same rifle haha love it.

@mrnoirstudio1947 It's pretty manageable to the point I don't think I've noticed until asked about it 😂 that being said, the Daniel Defense charging handle has a venting system similar to the Radian Raptor.

BCM

I definitely agree with you that it’s an amazing lower for lefties which you don’t see being made often! I do have a 11.5 and the goal is to sbr this lower so I can use it for multiple upper receivers haha. Right now my lightest combo is an aero precision lower with a bcm enhanced lightweight fluted barrel upper which turns out to be super light and well gas-Ed. Maybe I will put the adac with my 11.5 upper on the next video and show case some manual of arms to see how much the difference in the overall weight will change my opinion. Thank you for watching the video and commented! I appreciate it.

I’m wanting to do a adac lower build with a 9 in barrel with kac 8.5 rail. Trying to decide if it’s all going to fit well and how heavy it will be. I just finished a lmt 10.5 build it’s a sweet build. But I was wanting make a top tier build. Any ideas. I’m a girl so weight matters.

No!!!!!!! Go Gucci🙂

I’m glad the switch works out well for you 👌🏼💪🏼

Honest answer? You will be fine/happy with the stock mounts. I just like how the magnifier is able to drop straight down the middle instead of hanging on the side to prevent potential snagging point. I think for most people, that is the reason why they went with the unity magnifying mount. Questions you need to ask yourself: 1. Is it worth the extra weight? 2. Will you have your magnifier on your gun 24/7? Do you actually train with your magnifier if that is the case? Does your range even support the use of magnifier (is it long enough)? If you say yes to all of the questions above, then yes I'd buy the unity. If you say no to any of it, then no. Absolutely will not spend the extra dollar for basically the same thing. The rise height is nice though for the eotech. hahaha

@@mrnoirstudio well, I don’t care about the weight cause I just bought a new Daniel defense sound guard suppressor for my PDW and that’s like 22oz or some shit, I live in Nevada so magnification is always welcome and I prob will keep it on always. So it’s tuff, I want to buy more suppressors and things but I do want the Unity as well. I wish it was half the cost. Last question, with the Unity mounts, does the magnifier block any part of the holographic sight? It seems like it might block it a little when in the down position but hard to tell.

It doesn’t block anything

Hi GBmain, great questions all around. I will try to answer them to the best of my ability. I have only had experience with bcm (11.5" & 14.5"), geissele (14.5"), and colt (16") uppers so I can only speak for them. As far as accuracy for the upper receiver and retaining zero with factory handguard (for IR lasers), geissele was it based on MY experience. It is, however, heavier compared to the enhanced lightweight fluted barrel from bcm. Now, as for SHTF stuff, I tend to lean toward common gears that I can find lots of replacement parts for. Between the ADAC and the aero m4e1 lowers, both have never failed me, but If I could pick one, I would pick the aero for the following reasons: - Price, it's cheap - Common. You can find it anywhere. Though how often do you find yourself replacing your lower anyways. - Complexity. Less moving parts, less potential points of failure? - Gucciness. Because it is less gucci, less expensive, my monkey brain tends to pick it over the ADAC when it comes to training and trashing it around. This equates to me being more proficient with it. Bullet point number 2 is rather important. Lowers don't fail that often, if at all for a lot of civilian and their shooting schedule. If reliability is your concern, I think either one will serve you well. I don't think it's fair to compare an aero 556 with the trexarm 308 limit test. No one in their right mind would carry 5000 rounds of ammo (556 or 308) in a shtf situation along with a bucket of ice shooting and cooling in tight schedule. If it ever comes to that, oh man, I hope you have a team of buddies with you! The most that I have shot out of my aero lower at one time was a 4x30 round mag dump in under 2 minutes. Typical range day, I'd shoot around 150-250 rounds of 556. No pin walked out on me. The lower has been attached to a 11.5" bcm upper for a couple of years with roughly 4k rounds through it. Cleaned every other range day, still in good condition. Understood that my round count for that lower isn't that high, so please take it with a grain of salt. Cheers!

@@mrnoirstudio wow really appreciate the thorough response. Means alot. I currently have a complete ballistic advantage (aero) rifle but I haven’t shot it yet. My next rifle I will not be sooo concerned with budget and it will be specifically for a SHTF/do all purpose rifle. At first I was thinking maybe going with a complete LMT MARSL Piston 556 rifle but every time I look at it I just feel like the Piston premium just isn’t worth it over a quality DI rifle. Also in terms of parts compatibility, DI parts are everywhere, where as Piston ar’s not so much. did u buy your m4e1 lower pre built, or did u put it together? I bought mine prebuilt. Last question. In the lower of your ADAC, did u use geissele’s super 42 buffer spring and tube combo or do u think a basic aero complete lower will work more than fine with the SD upper? BTW u got my sub brother. Looking forward to future videos 🇺🇸💪🏻

I'd agree with you on the DI vs piston subject. Parts are everywhere for DI rifles. I bought my m4e1 stripped. Put a sd3g geissele trigger on it with their lower part kits from Geissele as well. I used a different lower part kit from an off brand company and had some issues with the magazine catch/release spring detain being 'too springy' which overpowered multiple magazine springs (mag pull 30 rounds gen 3 mags) and caused bolt failing to lock back on last round. Switched out the spring with one came with the geissele kit and it worked perfect. I could have just clipped a coil to solve the issue but it's my home defense rifle and I don't want to diy too much hahaha. In regard to the ADAC, I used an h2 buffer weight and an off brand spring for a while. Then I switched to the super 42 and lord was there a different. No more 'sprung' sound everytime you cycle a round. I don't know how to describe that sound/feeling on your shoulder. Highly recommend the super 42 buffer spring! Noise is gone, recoil feels much better too (or it could be placebo, who cares XD)

You can lock the bolt back with the magazine release (same location for any normal ar). The bolt release of the ADAC is the button that’s above the magazine release. If you’re right handed.

Its 13.5” from geissele :)

:0 will use my fiancée chapstik. Thanks for the suggestions!! 🫠😂

@@mrnoirstudio its something small you can carry that works

Definitely. I am still in the process of refining mine and getting rid of a few items that honestly are there for the look rather than something I’d actually use. Expensive isn’t always the best 🥲Thank you for dropping by! I really appreciate it

@@mrnoirstudio sick you got yourself a new follower bud 🤙

Oh interesting, I will look into this. Thank you for the suggestion 👁️🫦👁️

That charging handle doesn't do anything. The best charging handle for suppressors is hands down from SilencerCo Gas Defeating Charging Handle. I have every single make and model of charging handles and by far the SilencerCo is the best.

Haha I mentioned before but if I could cover all the brand symbol/names on my stuff I would. The channel’s primary focus is training… I know it may sound hypocritical since this is a main squeeze video..

Look for labyrinth seals on the SF flash hider not all of them have these rings around the circumference towards the back of the muzzle device The flash hider or break with these labyrinth seals are what you want

Very good question Wesley! When I was deciding whether or not to pin and weld the 3 prong warcomp to the 14.5", i kept on reading that people can hear the 'ting' sound while shooting, especially while shooting suppressed. I did notice a bit of that at the beginning, however, that noise quickly goes away after a few range day. Eventually you will have a very thin layer of carbon build up due to shooting suppressed and the 'ting' noise won't be an issue anymore. If you're really bothered about it, just go with the 4 prong or closed tine to be safe. But it's a non issue imo. Let me know if you have any more questions. Hope that helps.

@@mrnoirstudio I was more referring to the Reddit warriors saying it’s just not a great suppressor host overall and it locks up after 3 magazines 💀😂 do u have any input on that ? I’m a full time student I’m definitely not putting 1000 rounds a week thru my guns I’m just wanting a way into the suppressor world hassle free by having bcm do it. I would eventually go 11.5 and maybe try the 3 prong on that if they ever came in stock after all this brace mess.. other than the ting is that the only issue you’ve faced ?? I’m on my road to mojo as well

@@mrnoirstudio I would also be shooting a majority unsupressedfor a while .. until I can cough up more loan money towards a suppressor hahaha I know the warcomp is great in that regard

@@whynotwes lmao. Oh man I don't blame you on reading Reddit. Nothing wrong with doing research and save yourself some money. There are some truth to the info you found. The lock up can be semi-mitigated by putting a thin layer of gun oil and rub it on the 3prong (where the suppressor and the muzzle device meets). eventually with a lot of shooting, the gun oil will dry up and due to carbon build up, it will be a tad bit harder to remove the suppressor. This happens to all muzzle device (some more than others i supposed). I shoot roughly 100-150 rounds of 556 per range day. Mostly doing dynamic drills and conditioning, so I don't go through 1000 rounds per week either (who the hell has the money lolol). If you're like me, then I wouldn't worry about it too much. I have no problem removing the darn thing. There are other mechanical advantage to other suppressors on the market that will make it easier for you to combat carbon build up. I picked surefire due to the ruggedness. If it ever gets to the point where you can't remove the suppressor by hand, the suppressor was built so that you can just loosen the quick attach and shoot it off into a patch of grass and you will be just fine! Sorry for the long winded response.

@@mrnoirstudio man I appreciate the help I’ve watched your video like 10 times making sure it’s what I want. You didn’t have to go out of your way to type that up but u did so you’re a real one. Gained a subscribe from m… keep up the good content! Ordering the bcm 14.5 with pin/weld surefire warcomp rn I just needed some real answers/opinions.

Oh man, I have been eyeing the Eotech 1-10 or the vortex for a while now. I am still sleeping on it. I have a solgw bolt carrier group but have yet to try out their lower! Will definitely visit their site the next time I need a new lower :) Thanks for watching!

Going to be a dumb reason, but as much as I love to show off all the company branding, at the range or on KZfaq, I’d rather focus on shooting more. Haha kinda ironic for a “main squeeze” video but I don’t plan on making much of these. !! Hit me up with a photo after you get it! I still haven’t seen a good photo on the ODG upper. It’s super flat shooting for me. You will enjoy it for sure!

@@mrnoirstudio the ODG super duty is amazing. Shoots smooth, trigger is crisp. Took it to a night shooting event and clipped a thermal on for easy 200m impacts. How can I forward you a photo?

@@alexc6582 hooooowooo! Send me a couple of pics to @gmail.com! I look forward to it, glad you’re liking it so far

Also I think guns and gadgets did a video.on silicone on the shelf of the charging handle step by step to stop gas as well.

I saw it as well! Will put some silicone on to see if it helps

@MrNoirStudio if you wouldn't mind let me know how it works. I've got the silencer co CH so it works pretty well but I might do it for my 13.9 criterion just to help the small amount I get

I wouldn’t call the gas blow back an issue but I’m using the bcm bcg. I’m going to try a different charging handle to see if it helps!

The sling in this video is the Blue Force Gear Vicker sling I believe. In multicam black. :) cheers

When you purchase an ADAC lower, it comes with the bolt catch/release, mag drop button, upper receiver detains preinstalled. The radian safety levers will also be provided on the side (not installed) since you will have to install your own trigger group.

@@mrnoirstudio okay thanks. What about a buffer tube?

@@Ron55669 the ADAC kit does not come with a buffer tube, buffer spring or a pistol grip. You'd have to buy that separately. For buffer spring, I'd definitely go with a geissele super 43. It's super smooth and you won't hear the typical 'sprrrr' sound after shooting or racking a round.

The trigger is the Geissele SD3G (super dynamic 3 guns) flat face!

Hi Seqnu, I built the lower myself from different piece parts. The upper was bought as a fully furnished upper receiver group from geissele except the bolt carrier group :) Cheers!

The hand guard is the 13.5” SMR mk16 mlok rail from geissele

@@mrnoirstudio all the youtuber shoud be like you. congratulation really love you took time to answer wish you all the best

It runs very well. Aside from the extra weight, I have had no reliable issues. The reason why I kept it on is because it packs pretty nice and tight when I need it to. Not really meant for shooting while folded (can only let off one round) but more of a convenience for me! 👌🏼

@@mrnoirstudio price?

I think at the time, it was around $220-230. You can probably find it around that price or maybe cheaper now?

Not too many rounds through this upper. Roughly 1500.

:( it's quite expensive, don't tell my fiancee... 😅

Dude! I literally never knew what those were called! 🫠🫠 thanks my guy

@@mrnoirstudio anytime king!

Maybe it's indoor Fudd range use only. Or maybe it's closer to 200 rounds

Yeah that magnifier is looking at the bottom housing of the eotech. Does anyone else smell a heaping pile of bull 💩 here. Premium products, can’t use the magnifier though.

Both eotech and magnifier are sitting on unity tactical mounts. XD you’re probably not familiar with the magnifier Mount. When engaged, the magnifier will pop up to the height of the eotech.

​@MrNoirStudio what an absolute Chad reply. No mockery of his ignorance, njust kindness

I appreciate the recommendation

Haha I am in the doodoo state of Washington! Thanks for watching my guy!😁

Thanks for watching! 🤘

Noir, but not that noir.. 💀jkjk. I wanted to go with BlackPawStudio because of my dogs, but it’s super close to BlackTailStudio which is my favorite wood working channel so I went with this instead :/

Mann it’s hard to talk about a pew in your room by yourself with a fever 😭. Thanks for watching!