My opinion of the AliExpress Thanksbuyer pedals + Guide how to calibrate / rF2 AC ACC AMS2 RRRE

Рет қаралды 4,287

Күн бұрын

My conclusion on a very strong SimRacing hardware pedal. In terms of price and performance, the pedals are unbeatable.
Plus a guide on how to calibrate these pedals properly with FreeJoy.
Timestamps:
0:00 - Introduction
0:21 - My honest opinion
1:39 - Calibrating the Pedal with FreeJoy
AliExpress Thanksbuyer Pedal:
de.aliexpress.com/item/100500...
FreeJoy (Calibration Software)
gforcecontrol.com/software/
Firmware:
github.com/FreeJoy-Team/FreeJ...
github.com/FreeJoy-Team/FreeJ...
#simracing #simracinghardware #rfactor2 #iracing #assettocorsa #assettocorsacompetizione #automobilista2 #raceroom #heusinkveld #fanatec #aliexpress #simracingpedals

Пікірлер: 29

@user-fi9jg7vh8g 7 ай бұрын

I bought recently similar pedal but from different seller. Freejoy not supported - but can use DIView instead. Controllers have some "digital noise" (when you press clutch pedal - brake pedal will react a little bit also).

@brendo690 9 ай бұрын

Are the dampers for all 3 pedals two-way or is there a one-way damper for the throttle like on the heusinkveld ultimate pedals? Do the throttle and clutch pedals also use Mavin branded loadcells?

@Spinelli__ 9 ай бұрын

I have these exact pedals but from that other place that starts with an "E" and ryhmes with DeeBaii. All 3 loadcells are authentic Mavin loadcells. I believe the throttle damper is also 2-way unfortunately. It's Insanely smooth. Feels incredible, like butter. It's still fast on rebound, don't worry. However, you can always adjust it to make it less (or more) pronounced.

@estein21 9 ай бұрын

What diameter is the rod that holds the brake elastomers?

@BramHarmsen Жыл бұрын

So if I understand it correctly these pedals come already pre flashed with the FreeJoy firmware? Which makes it possible to use all the nice calibration features. Thanks for the video by the way!

@memoNo1719 Жыл бұрын

Yes exactly👍 Freejoy is a very good and userfriendly piece of software.

@Spinelli__ 9 ай бұрын

Yup. Freejoy gives you the same options that programs like Heusinkveld SmartControl software gives with all the different custom linearity shapes & curves you can apply. It also allows you to adjust the strength of the load cell, filters, etc. I got the version with the white German elastomers so the pedal was preset for probably somewhere in the 50-80 Kg of max force. Windows calibration like DiView or DXTweak2 cannot increase this, but with FreeJoy, I was able to increase this.

@AdrielMachado 11 ай бұрын

I accidentally flashed the pedals and now nothing works, can you tell me how I can fix this? The biggest problem is that now I even have the original firmware but the pedals are not entering flash mode

@memoNo1719 11 ай бұрын

You mostly use the Freejoy software? You have the same pedals, don't you? You have to go into Freejoy, click on the last tab where the flash mode is and then click on the file (flash software).

@AdrielMachado 11 ай бұрын

@@memoNo1719 yes, freejoy. My pedals is a little bit different but is the same system. My problem is that when I click on flash mode, nothing happens

@memoNo1719 11 ай бұрын

@@AdrielMachado Have you selected the pedals in the first tab at the top left?

@AdrielMachado 11 ай бұрын

@@memoNo1719 yes

@memoNo1719 11 ай бұрын

@@AdrielMachado Did you bought them from Thanksbuyer?

@estein21 11 ай бұрын

What is the clutch pedal like, does it have a bite point feeling at all? It looks like there is alot of adjustment available on it.

@memoNo1719 11 ай бұрын

Well, the clutch is sufficient. And in terms of adjustment potential, it is in no way inferior to the HV Ultimate. I am satisfied.

@yamyam60 5 ай бұрын

What about play in the bearings? Most of the other AliExpress pedals require bearing mod replacements because the play is excessive.

@memoNo1719 5 ай бұрын

No problems for almost 2 years. The screws have to be retightened from time to time. But that's it.

@jgloc25 11 ай бұрын

Quick question, why did you have to put spacers between the pedals and plate?

@memoNo1719 11 ай бұрын

So that the LC has enough leeway.

@jgloc25 11 ай бұрын

@memoNo1719 can you clarify,leeway for what? You mean space? If so, isnt there a metal frame on it below? Just asking as first i thought the spacers were for to strengthen the 4 bolts on the pedal plate.

@memoNo1719 11 ай бұрын

@@jgloc25 yes this. There isn't an metal frame below. 👍