My set up on the Roban Bell 412 for helipilot17

Рет қаралды 3,689

Northwest Scaleworks by JestRR

Жыл бұрын

helipilot17 asked to see what I was running for my set up in my Roban Bell 412 LACoFD, hope this helps!!

Пікірлер: 25

@helipilot17 4 ай бұрын

Thank you. I appreciate it very much

@siholley 3 ай бұрын

Thank you for posting this. I’m just starting my mechanical set up and it’s daunting. This video really helped me. Thank you

@JestRR 3 ай бұрын

If you get stuck on something, just hit me up. I’m sure I can derail your train of thought!!! Jestrr@msn.com

@siholley 3 ай бұрын

@@JestRR thank you so much. I’m building the Roban 800 UH-1, it’s my first scale build and the manual is horrendous to say the least.

@coache1268 Жыл бұрын

FANTASTIC you saved my machine. I was going to sell it till I saw what you did with your dog house. now it is back on the "I'm keeping it fleet" THANKS!!!!!!

@JestRR Жыл бұрын

THATS FRICKEN AWESOME!!! These newer helis seem to fly so well it’s hard to see them be put on the shelf because of a situation like the dog house. Guess I’ll have to do a more In depth vid on what I did….

@Spooledup Жыл бұрын

Thanks for posting this Spinner! Really like these walk thrus on setups.

@stevestonrcguy5393 Жыл бұрын

Awesome video 👍👍👍 love the look of that Huey, great colour combo✌️

@helipilot17 Жыл бұрын

Nice job by the way Mike. You really brought that to a new level. Awesome idea with the split engine hatch. I’ve gone through a lot of ball links taking my rotor head off multiple times.

@helipilot17 Жыл бұрын

Thank you very much. I really appreciate you taking time to do that. And sorry about the no name thing lol. It’s Rob.

@JestRR Жыл бұрын

I do want to see how yours goes!! and if I can steer you right into a ditch, let me know!!

@helipilot17 Жыл бұрын

Hahaha. I will for sure. Once I collect the gear I will most definitely shoot you a vid. Thanks again.

@JohnVHRC Жыл бұрын

Thats a cool heli!

@Wooz2 Жыл бұрын

And that is how you do that !!

@helipilot17 4 ай бұрын

Thanks again for the information Mike. One more question, on your light controller setup, I see you have a battery amongst the mix. What size of battery are you using for this? I assumed the light controller worked off of the main batteries, apparently not lol Thanks again sir Rob Harris

@JestRR 4 ай бұрын

Talking about the battery that is just under the front of the doghouse. Yes, that is the light controller battery and I believe it is a 2200 3S. One of my questionable batteries that I won’t fly an aircraft, but I will use for light programmers. The helicopter has its own battery, a 2200mah 3S for the radio system, and the main packs are two 5000 mah 6S packs making 12 S to run the motor

@pilot482 Жыл бұрын

Hello Mike. Love your videos. My name is Adam. I was wondering if you could help me with a vibration issue on my Roban MD-500E 800. First off what headspeed would you recommend? The blades are balanced and the helicopter runs smooth without blades and with blades at zero pitch. I have the mechanics on a test flying rig and when I pull pitch to fly. I get a nasty vibration. As soon as I land and reduce pitch it goes away. Any tips for me. Running a Egodrift 460kv on 12S with a Castle 160HV. Thanks in advance.

@JestRR Жыл бұрын

Couple of things to check…. Blade tension, make sure the blades move back and forth with the same amount of pressure to move it. If one is too tight, that can cause a vibration. Also check the thrust bearings. They have been known to be put in backwards and unlubricated. In the stack, the race with the smaller inner diameter goes towards the outside. And I’d start at 1200-1250 on the RPM.

@pilot482 Жыл бұрын

Thanks. I will check those things out.

@helipilot17 Жыл бұрын

Hello again Mike. What is your preference in a LiPo battery charger ? Mine is a pos. Lots out there to choose from. Thanks Rob

@JestRR Жыл бұрын

Well this is what I have…an EOS 720i superDuo3 from Hyperion and an icharger 308 duo. I made up a charge box out of a RIGID tool case, put in two 1200 watt 12v power sources, one for each charger. That way I can charge 4 of my 6S 5000’s at a time!

@helipilot17 Жыл бұрын

@@JestRR Thanks again Mike. I appreciate the info.