My Simplified Patina Process for Custom RC Hard Bodies

Рет қаралды 7,998

10 ай бұрын

This body is available from nightcrawlers3d.com check him out on facebook;
profile.php?...
I have slowly been teaching myself how to patina over the years, finally took a step back and streamlined my process, makes things a bit easier!
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink.com/click.php?t...
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX

Пікірлер: 33

@SwampersRC 10 ай бұрын

I love the tiny black spots all over. Looks like you would expect on a car that's been painted several times and then sat in a junkyard for 50 years!

@JoeChadburn702 Ай бұрын

3 coats Light Metal Grey, 2 light Coats Off White, then 2 coats there on of the Paint job History of Your Choice. Vary the Grit usage spiratically once it loiks knackered use an M3 buff Pad to blend the Grit varient and then use a Spray Bottle to apply dirty Water colour. Once dried keep Layering till the weathering is where Your at. Quick Buff pad again and then Matte Clear coat. Optional when the Clear coat is Tacky throw some Mixed Yellow, Red, and Multi Brown Pastel dust at it to give Live Dirt effect. Looks EPIC when done. Clear coat between Dusting Layers so if Ya like a Previous part and think youve wrecked it You can buff it out

@SouthernRCGarage Ай бұрын

Great video. Love the result. ❤️💯

@amraceway 10 ай бұрын

Great technique. You can also add bubbling rust by sprinkling fine stone powder where rust would be bad like door corners and dabbing it with rust coloured paint.

@JoeChadburn702 Ай бұрын

I actually mean "Off" white. Years ago Pure White was concidered a Premium Color for finish so it was More of a Creamy White Primer.

@andrewrichey7374 10 ай бұрын

Yeah turned out beautiful dude as always, I really like the Coop body just don’t know what kind of chassis would work with Yep I’m here watching

@andrewrichey7374 10 ай бұрын

Heck yeah, I’d buy the kit for the five window coupe 👍👍😎 well I’ll catch you on the next one until then peace and chicken grease 😁👍👍😎

@TheUncleRuckus 10 ай бұрын

Have you ever tried using Hairspray or Chipping Fluid? It would make the weathering a lot easier by requiring less sanding to break through the layers. You just black base it as usual then spray it with Chipping Fluid or Hairspray, then paint it as usual and when it's time to weather it lightly wet sand it, the water will help loosen the Chipping medium and reveal the layers. I really like this resin cast body, it's the trunk/rear quarter panels that make it. 👍👍

@RCeveryday 10 ай бұрын

Ive got some chipping stuff, just havent tried it yet. Honestly I keep forgetting lol

@TheUncleRuckus 10 ай бұрын

Forgot to mention that after you've sanded it to where you like it to seal it with a matte varnish/sealer before doing your final weathering or else you could expose more of the chipping medium to moisture and it will expose more of the layers than you may want. 👌

@brianargo1659 9 ай бұрын

It looks super good. 1 of the best yet

@williamsaloka9043 10 ай бұрын

All I want to know is that Bob Ross in the corner, and when will he start painting happy trees and happy mountains?? Nice work!

@stefan-norge 10 ай бұрын

Looks great 🎉

@713Ace529 10 ай бұрын

That came out pretty good!.

@mikejungferman4744 5 ай бұрын

That IS Bob Ross ! Did you say that was printed? I used this technique years ago, but since the invention of the interweb, literally 5000 ways to weathering, so confusing thank you for reminding me of how this should be done, and just about the same in real life, From Ocala Florida

@KaylorRCAdventure 3 ай бұрын

Very helpful thank you.

@IowaBudgetRCBashers 10 ай бұрын

Looks good..

@jeremyjock 5 ай бұрын

would those weathering/rust wash colors work over a matte black finish? i have an Element Enduro with the scratch n wear finish (matte black w brick red underneath), but i would like to put more effort into it instead of just sanding off the black. thanks for any help!

@RCeveryday 5 ай бұрын

You could. It would be more subtle over that finish.

@jigworx6020 20 күн бұрын

Looks sweet. I’m about to paint my first rc4wd hard body and not sure if I need to use tamiya?

@RCeveryday 20 күн бұрын

Tamiya paints are very fine spraying and very durable. If you are going to do a patina style paint job I wouldnt. The few times I tried it doesnt sand through easily enough. Going shiny or solid color tamiya all the way

@jigworx6020 20 күн бұрын

@@RCeveryday I’m planning to do the pizza planet truck from Toy Story which would require a weathered yellow color with rust and dents. Would that be considered patina? If so what kind of paint do you use? Up until now I’m only familiar with lexan bodies so pardon my ignorance

@jigworx6020 20 күн бұрын

I’m also wondering which yellow I should use for a weathered and faded peeling yellow. Appreciate the help!

@RCeveryday 20 күн бұрын

Rust and dents would be patina. Most of what I have done is a bit more extreme patina compared to the pizza planet truck. There are a ton of great videos on faded and peeling paint effects from the model railroaders on youtube. Chipping fluid and or the hair spray effect would fit the bill. Ive not done any of that yet, but some great videos on it out there.

@jigworx6020 18 күн бұрын

@@RCeverydaywhat was the purpose of sanding the red primer, is that just to thin it down a little bit for later?