No video
My terminator swapped 04GT runs AND drives!!
Рет қаралды 201
Күн бұрынProject Fobra moves under it's own power! terminator swap is pretty much complete!
cobra sn95 new edge mustang gt terminator
@SVTAdamSVT 3 жыл бұрын
love seeing this beast coming together.
@jakeb593 3 жыл бұрын
It is a fun project for sure! Thanks for the support!
@mikeblalock9380 3 жыл бұрын
Sounds good!! That Power steering is screaming. It's in there and moving though.
@jakeb593 3 жыл бұрын
Yea it is! Definitely going to jack the front up and "bleed" the p/s system.
@justin.c_svt 3 жыл бұрын
The T56 needs a reverse solinoid wired in or it will be very hard to get Into reverse. The cobras ecu has it wired in but you may need to wire a solenoid in to make it work. As for the power steering it’s best to Jack the front end up, take the power steering cap off and turn the wheels all the way left and then all the way right back and forth several times to bleed air out of the system while the car is off and then you can do it again with the car running
@justin.c_svt 3 жыл бұрын
Nice work man
@jakeb593 3 жыл бұрын
Yea it's all wired up, I just didn't know where it was, had to look up the shift pattern since I hadn't driven one yet..
@jakeb593 3 жыл бұрын
And thanks a bunch!
@sergiomelapelas3378 2 жыл бұрын
Im doing a 04 cobra termi swap on my gt bullitt . my question is this what wire harness did u change to make that cobra motor work ?
@jakeb593 2 жыл бұрын
I changed every single harness in my car.. you do not need to do that.
@sergiomelapelas3378 2 жыл бұрын
I have all the wire harness everthing looks like the same already in the car but. Im not sure thanks for answering my friend ir car looks awesome
@jakeb593 2 жыл бұрын
It's all the same.
@sergiomelapelas3378 2 жыл бұрын
@@jakeb593 that's good news so only how to swap out the computer
@jakeb593 2 жыл бұрын
You'll need the gauge cluster and ecu
Garage 54
Рет қаралды 4,3 МЛН
Дима Масленников
Рет қаралды 9 МЛН
Skadonk
Рет қаралды 84 М.
NCommander
Рет қаралды 1 МЛН