My Top 7 Miter Saw Tips for Beginners.

Рет қаралды 1,639,739

3 жыл бұрын

My Top 7 Mitre Saw Basics for Beginners. Having a Mitre Saw in your workshop is one of those ‘must-have’ tools. For me, l use the mitre saw on practically every woodworking project l undertake. Having said that, it can also be one of the most dangerous tools in the shop so it must be given the respect it deserves.
In this video, I've compiled what l think are my Top 7 Mitre Saw Tips that every beginner woodworker should know. Hope you find the video useful.
Cheers 👍😁🇦🇺
Before l go on...
Link to All My Woodworking Plans: DiyForKnuckleheads.etsy.com
Buy Me a Coffee.
Please help my Channel to keep producing DIY Educational Content with a small donation. Your generosity is much appreciated. Cheers.
www.buymeacoffee.com/unclekna...
My Mitre Saw:
Dewalt Compound Mitre Saw:
Robust and Powerful. Perfect for the beginner without being too pricey.
amzn.to/34i62ou
Link to my Jig for Safely Holding Small Pieces of Wood:
diyforknuckleheads.com/my-top...
Ways to Support my Channel:
👍 ➡️ Subscribe to my KZfaq Channel: / shaneconlan1
👕 Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessories Store! shop.spreadshirt.com/DIYForKn...
🛠 Tools of the Trade 🛠
Tools l Use, Resource Page:
diyforknuckleheads.com/tools-...
Tubebuddy for Creators: Install TubeBuddy for free to help you get the most out of KZfaq! www.Tubebuddy.com/DIYForKnuck... …………..
My DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SOCIALS: Please Note: If you intend to submit a Workshop Hack for review, please watch the following video for YOUR submission requirements. The relevant footage starts at the 2.22 mark. I look forward to seeing your tips 👍😁🇦🇺 • NEW WorkShop Hack Vide...
Instagram: / diy_for_knuc. .
Check us out on Facebook: / diyforknuckl. . …………..
Check out my NEW Spanish Channel! All the same videos but in Spanish! kzfaq.info/love/iJO...
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell, NSW, 2452
Australia.
------------
Music supplied by and Released under Creative Commons License 3.0. GET UP! by Nicolai Heidlas Music / nicolai-heidlas
Subscribe Button Author: Imotivation
pixabay.com/videos/subscribe-...
Have a great day and l’ll see you again real soon. 😁
FTC Disclaimer:
This video is not sponsored. All items are purchased with my own money unless stated otherwise and opinions are my own.
If I do receive products for free, I will always disclose it and I will still always provide you with my honest opinion. This video and description contain affiliate links, which means that if you click on one of the qualifying product links, I’ll receive a small commission if you decide to make a purchase. This does not cost you anything extra and if you don't want to use the links, you can always Google the product separately, no worries. I am a participant in the Amazon affiliate program as well as TubeBuddy and others.
Links are provided for your convenience as well as my benefit. Some links are not affiliated but are shortened to preserve space in description box.
#mitresaw #mitersaw #mitersawtips

Пікірлер: 1 900

@diyforknuckleheads 3 жыл бұрын

G'day Folks. I love my Mitre Saw! It's over 12 years old....l use it on basically every project that l undertake... and is still cutting like a Demon! The mitre saw is one of those must-have tools that as well as being incredibly useful, it can be extremely dangerous so PLEASE take the time have a look at these tips. You'll be glad you did! Cheers 👍🇦🇺😁

@elgringoec 3 жыл бұрын

I know, I know, it says "for beginners". But I was curious. My oldest one is thirty years old, Makita. It's a heavy little bugger and rates a permanent roost in the shop. For portable units I picked up a Delta and habba frate sliding. Then I have some two dozen other types of saws tucked about here and there. Plus other cool stuff I've picked up over a lifetime. Nevertheless, I picked up a handy trick - that angle at the bottom of the stop block. I have a habit of wiping and/or blowing the deck clean between cuts so it hasn't been an issue that's called out to me before but no doubt it has to save me some cleaning effort. And your Australian mannerisms are a real hoot to us colonists here on the flip side. 😆 G'day mate!

@diyforknuckleheads 3 жыл бұрын

@@elgringoec Thanks mate....really appreciate the feedback from a bloke who has some experience 👍 Have a good one 👍😁🇦🇺

@thinkr8142 3 жыл бұрын

Why not do tip 3 on tip 7 and put a line on the jig :-) Although I personally would not do it, it is good for many beginners...

@diyforknuckleheads 3 жыл бұрын

@@thinkr8142 Yeah it's a good idea Peter 👍

@bviljoen980 3 жыл бұрын

Qàaà

@brendastorm1111 2 жыл бұрын

My 93 year old dad is a master carpenter. He thinks you're absolutely hilarious. He wishes all new woodworkers would watch you. Save a lot of ER visits.

@diyforknuckleheads 2 жыл бұрын

Hahahahaha....Hi Brenda....glad your dad likes the vids 😁 Thanks for watching 👍😁🇦🇺

@leprechaun7667 10 ай бұрын

Master Carpenter 🤦‍♂️🤣🤣🤣 Dude he's just a Carpenter albeit a good one maybe! I'm 65yrs a Carpenter I'll still outdo most......I'm no master! You'll always be learning and never master

@applejacks8160 13 күн бұрын

@@leprechaun7667 a “Master Carpenter” refers to the level of skill you are at, heck, you are probably a Master as well. Take the title with pride.

@jeffphillipssr4239 Жыл бұрын

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzfaq.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

@christopherguiliano4104 3 жыл бұрын

You have the best Dad jokes! That was funny!

@diyforknuckleheads 3 жыл бұрын

😂....Cheers Chris!....glad you liked it mate and thanks for watching 👍😁🇦🇺

@Daz555Daz 3 жыл бұрын

My bonus tip. If you are trying to cut a piece which is slightly too wide for your mitre saw, you can effectively increase the cutting width of your saw by placing your piece on top of another to raise it towards the wider part of the blade. For example - my small mitre saw has a 125mm max cut but if I place my piece on top of some 15mm board I can cut 140mm wide pieces comfortably.

@diyforknuckleheads 3 жыл бұрын

👍..Good tip Daz! 👍😁🇦🇺

@markp8295 2 жыл бұрын

Great tip. Thank you.

@n40tom 11 ай бұрын

That is a great tip . Another thing that you can do is lift the front of the piece while the rear-end remains tight against the back fence. It might sound dangerous but I've done it hundreds of times. Just be careful

@chipperkeithmgb Ай бұрын

Yes saw norm do that

@andresarroyo6596 3 жыл бұрын

You're like the teacher that a kid admired because you make learning fun! First time watcher, I'm hooked👏👏👏!

@diyforknuckleheads 3 жыл бұрын

Thanks Andres!!!!! Really appreciate the comment mate. 👍👍👍👍😁🇦🇺🎄🎄🎄

@debster1073 3 жыл бұрын

Same

@jonniringodingo 2 жыл бұрын

Absolutely accurate assessment!

@rasheshshah6810 2 жыл бұрын

No Drama

@Mouse6677 2 жыл бұрын

Listen to this guy...IF I had Teachers like this I would of done a lot better in life 😝....So TOP TIP KNACKERS!!!!!!

@the_teknomads 5 ай бұрын

This Gents enthusiasm is pleasantly infectious.

@diyforknuckleheads 5 ай бұрын

Cheers mate....thanks for taking the time to watch 👍😁🇦🇺🎄

@CrazyOneCanuck Жыл бұрын

The zero clearance and the tool to hold small pieces? That was the icing on the cake!

@diyforknuckleheads Жыл бұрын

👍😁...Cheers mate! Glad you liked it 👍😁🇦🇺

@buckmcdaniel8631 Жыл бұрын

Thanks for the tips. I just watched for maybe the third or fourth time, LOL.

@diyforknuckleheads Жыл бұрын

😂......Good stuff Buck 👍😁🇦🇺

@lorinewton1 3 жыл бұрын

I’ve been using my mitre saw for 5 years without knowing any of this! Thank you!

@diyforknuckleheads 3 жыл бұрын

No worries Lori! Glad you found the video useful 👍😁🇦🇺

@nicholascaldwell6079 3 жыл бұрын

First decent explanation of what a zero-clearance plate actually does that I’ve seen online.

@diyforknuckleheads 3 жыл бұрын

That's great! Thanks for that Nicholas and for watching 👍😁🇦🇺

@nicholascaldwell6079 3 жыл бұрын

@@the_original_skytiger sadly yeah most videos seem to assume you’d already know

@speckulator7516 3 жыл бұрын

It also shows you exactly where the blade is going to cut. On most projects that is more important than a tiny bit of tear out.

@stewartbourke 2 жыл бұрын

Really great tip on the zero-clearance plate - so simple but effective. Really enjoy your delivery too...

@tommyopdahl4604 2 жыл бұрын

That's actually the most useful tips I've ever seen 👍

@diyforknuckleheads 2 жыл бұрын

Thanks Tommy! Really appreciate the comment mate 👍👍

@bobketteringham4779 21 күн бұрын

I am a beginner woodworker at 71 years old. Your tips are a great aid. Thank you!

@diyforknuckleheads 21 күн бұрын

Thanks Bob! Glad you found the video useful mate and thanks for taking the time to watch 👍😁🇦🇺

@Richie5480 3 жыл бұрын

When they bring their hand across the saw, it’s called a cross cut, LOL 😆.

@thomasclarke8220 2 жыл бұрын

LOL, also known as amputate!

@wild_away 3 жыл бұрын

G'day Uncle Knacker! I moved to Australia 2 years ago from South Korea and am making career as a carpenter, and I'm learning heaps from your videos! not only carpentry but an aussie accent and a bit of sense of humor of uncle as well😂 what a beautiful educational channel! Keep up good work and appreciate it!

@diyforknuckleheads 3 жыл бұрын

Thanks heaps S.C 👍🇦🇺🇦🇺 Great effort coming from Korea and getting stuck into carpentry....all the best with it mate! I'm sure you'll do really well 👍 Thanks for watching 👍🇦🇺😁

@jill-of-all-trades 3 жыл бұрын

Struth mate, that’s awesome! 🤣🤣🤣

@katlescraftpatch9605 3 жыл бұрын

안영하세요! I am learning Korean by myself at the moment. I hope you enjoy learning here in Australia!

@IsaKocoglu 3 жыл бұрын

Good on ya mate! 🇰🇷😁🇦🇺

@David_P132 3 жыл бұрын

Good luck to you in Australia.

@n40tom 11 ай бұрын

Thank you I am going to make that hold down jig soon as I finish my coffee.

@diyforknuckleheads 11 ай бұрын

Good stuff mate! 👍😁🇦🇺

@savagehadoken6828 2 жыл бұрын

Excellent advice mate and the dad jokes are epic, keep em coming 👍

@diyforknuckleheads 2 жыл бұрын

Cheers mate! Glad you liked the video and thanks for taking the time to leave some feedback 👍😁🇦🇺

@DanielinLaTuna 3 жыл бұрын

Tip number 1-1/2: unless you have a good sawdust collecting system, a dust mask!

@marydalrymple4237 3 жыл бұрын

I'm a beginner, thanks for the helpful tips. you crack me up!

@diyforknuckleheads 3 жыл бұрын

👍😁..Cheers Mary! Glad you liked the vid 👍😁🇦🇺

@sonnyjimm23 Жыл бұрын

He's the Dr Karl of the Workshop. 👍 Brilliant.

@diyforknuckleheads Жыл бұрын

Hahahahaha....Cheers mate 👍😁🇦🇺

@alesizzz1 Ай бұрын

Always enjoyable to watch your videos. Well done

@vikasgrover1981 2 жыл бұрын

I am getting started in the world of miter saw woodworking but so far you are my favorite presenter. Great videos!

@diyforknuckleheads 2 жыл бұрын

Fantastic! Thanks for that Vikas. Glad you find the videos useful mate 👍😁🇦🇺

@jesuswasacarpenter 3 жыл бұрын

Your since of humor and overall vibration is so high! Thad bit with the red nail polish and calling out all your woodworking buddies by name = 😂😅👏

@diyforknuckleheads 3 жыл бұрын

😂😂....cheers mate 👍🇦🇺😁

@luisbernardez4853 Жыл бұрын

You're one hell of a teacher my good man!!

@diyforknuckleheads Жыл бұрын

Cheers Luis....appreciate the feedback mate 👍😁🇦🇺🎄

@f.demascio1857 2 жыл бұрын

I love your attitude. The accent makes it even more.

@diyforknuckleheads 2 жыл бұрын

Awesome! Cheers for that mate...appreciate the feedback and thanks for watching 👍😁🇦🇺

@dianahardy5922 3 жыл бұрын

I love the way you've CLEARLY explained everything (and made it funny and memorable). I appreciate the professional quality of this video which I've used in the research for my new miter saw.😃

@diyforknuckleheads 3 жыл бұрын

👍😁...Cheers Diana! Really appreciate the feedback and l'glad that l could help in some way 👍😁🇦🇺

@andrewpeterson7633 2 жыл бұрын

Only just started looking at beginner mitre saw projects, this one came up in the top 3. Since its based on Tips, this is a very essential video for those who are either accident prone, have issues with directions (do not like reading manuals or books) and finally to learn some super simple tips to make your life a lot easier, cheers mate!

@diyforknuckleheads 2 жыл бұрын

No worries at all Andrew! Thanks for taking the time to watch mate 👍😁🇦🇺

@BombayPotnoodle 6 ай бұрын

So simple and so brilliant. Thank you :)

@peternewman7940 Жыл бұрын

Sound advice and excellent safety. Saws don't take hostages.

@diyforknuckleheads Жыл бұрын

👍😁....Very true Peter....thanks for watching mate 👍😁🇦🇺

@AllThingsMech Жыл бұрын

Great video. FYI, these are called miter saws here in the states as well - the term "chop saw" typically refers to a metal cutting saw with an abrasive wheel. I've never heard anyone here use the two names interchangeably, although I'm sure it happens.

@diyforknuckleheads Жыл бұрын

Thanks mate....appreciate the feedback 👍😁🇦🇺

@davejohnson5278 5 ай бұрын

I only knew it as a chopsaw until I went to purchase my own. While shopping for one, I asked about the pros and cons of the different brands of chop saws. Fortunately, the guy I was talking to was an old woodworker and knew I was talking about a miter saw. Most new, younger woodworkers, I think, only know it as a miter saw.

@andrebartels1690 2 жыл бұрын

Once again, your tips are good as gold. I especially love the jigs and hints for safe material handling 👍 I'd like to add one small tip: If you find yourself cutting longer pieces, like fence boards or such, place another support under the far end of your piece, so it won't fall down when the saw is through.

@diyforknuckleheads 2 жыл бұрын

Thanks Andre and good tip too mate 👍👍😁🇦🇺

@martyquisenberry1740 2 жыл бұрын

excellent illustrations combined with wit and humor. demonstrations very helpful, practical

@diyforknuckleheads 2 жыл бұрын

Thanks Marty! Appreciate you taking the time to watch mate 👍😁🇦🇺

@familymanof6169 9 ай бұрын

I'm 65 years young and new to woodworking. I accidently came across this fellow the other week and I keep coming back to his site for woodworking information. He is very serious and injury conscious while at the same time being very comical and educational!

@diyforknuckleheads 9 ай бұрын

👍😁....Cheers mate! Welcome aboard 👍😁🇦🇺

@familymanof6169 9 ай бұрын

@@diyforknuckleheads Thank you, Suscribed, Love your channel!

@diyforknuckleheads 9 ай бұрын

@@familymanof6169 Thanks mate 👍😁

@PMA85H 3 жыл бұрын

Good tips, but I would point out that, when using a stop block, ALWAYS hold the workpiece on the same side as the stop block. If you don't you are creating a pinch point between the blade and the stop block.. Doing this eliminates the need for waiting after every cut because the waste side of the lumber is free to move away from the blade unhindered.

@diyforknuckleheads 3 жыл бұрын

Good point Joseph but sometimes the piece is to close to the blade to safely do that 👍 Thanks for watching mate and for the constructive feedback. Cheers 👍😁🇦🇺

@budtox5144 2 жыл бұрын

Like he said, If you wait for the brake to kick in and the blade to stop before you lift the saw up its always pushing the piece against the fence. So as long as its not twisted its not going anywhere.

@martvogt7019 2 жыл бұрын

? New to chop saw use, but could you push the piece that is in your left hand against the side of the blade while the teeth are below it to act as an additional brake to stop the blade which would lessen the time before one could lift the stopped blade safely?

@pearljam_1 6 ай бұрын

@@martvogt7019 Once you pinch the blade, regardless of where the teeth are, it can send pieces flying. The friction against the sides of the blade is what causes the pieces to be thrown, not the teeth.

@jamishep 3 жыл бұрын

Great tips Shane. When someone with 20 or 30 years of experience gives tips on their tools of trade, smart people listen! I listened AND took notes 😆

@diyforknuckleheads 3 жыл бұрын

Smart man Jamie 😁.....Thanks for watching mate 👍🇦🇺😁

@jamishep 3 жыл бұрын

Thanks Shane, wish I could return the favour, so if you ever need tips on how to manage an acutely psychotic violent offender, flick me a msg 😁

@diyforknuckleheads 3 жыл бұрын

@@jamishep 😂😂...no worries mate...will do 👍👍

@ChubbyUnicorn 2 жыл бұрын

very helpful! that 45 degree cut on a stopblock tip is priceless!

@diyforknuckleheads 2 жыл бұрын

No worries at all mate! Thanks for watching 👍😁🇦🇺

@ahmetalizebrs 2 жыл бұрын

that 45 degree trick is just priceless , thank you SIR!

@MrManAmong 3 жыл бұрын

Got my first miter saw this summer and I love it. These tips were invaluable. Thank you!!!

@diyforknuckleheads 3 жыл бұрын

No worries at all mate! Glad you found it useful and thanks for watching 👍😁🇦🇺

@specialk6984 3 жыл бұрын

Thanks, that nail polish excuse helped me out loads. Now if you could just come up with a reason I've got lipstick and high heels in my tool box I'd be in the clear!

@diyforknuckleheads 3 жыл бұрын

😂😂😂.....I'll look into it mate 👍😁🇦🇺

@specialk6984 3 жыл бұрын

@@diyforknuckleheads 😂 thanks.

@debster1073 3 жыл бұрын

😂😂😂😂😂😂

@davidgriffith912 3 жыл бұрын

Too many secrets ha

@adamwilks 3 жыл бұрын

I always say the lipstick is for marking where the door catch hits the door frame, when morticing the strike plate. 😂

@neo_nawaratintarapanich6209 2 жыл бұрын

Love to watch your VDO because I love Jürgen Klopp👍👍🤣🤣😄

@diyforknuckleheads 2 жыл бұрын

Hahahahaha...who doesn't love the Klopp!😂 Did you see my Jurgen Klopp videos...here are the links 😂 kzfaq.info/get/bejne/Y6mUoc2ksJPJlH0.html and kzfaq.info/get/bejne/ouB7m66lqN-smo0.html 👍😁

@kellyjean4981 2 жыл бұрын

I have been binge watching videos on mitre saw jigs. They all look so fancy and need many extra tools to create them. Your ideas are simple and exactly what I need. Thank you for the great tutorial

@diyforknuckleheads 2 жыл бұрын

My pleasure Kelly! Glad you found the video useful and thanks for taking the time to watch 👍😁🇦🇺

@douglafferty7688 3 жыл бұрын

As a relative newbie to the usage and safety aspects of the mitre saw, I cant thankyou enough for sharing theses invaluable and intuitive tips. Thankyou again...brilliant vid!!

@diyforknuckleheads 3 жыл бұрын

Thanks Doug!...glad you found useful mate 👍😁🇦🇺

@IsaKocoglu 3 жыл бұрын

Great tips KnackeeEeEEEeersssahhh! I am especially in love with the dowel and zero-clearance base and back! I have to go and make meself one once I get the shop up and running!

@diyforknuckleheads 3 жыл бұрын

Cheers Isa! Give it a go mate....you'll be glad you did 👍 Thanks for watching 👍😁🇦🇺

@TheDarkmanification 3 жыл бұрын

Just brought a mitre saw and am keen to get woodworking,. This video was easy to follow, warm amd funny, and informative without being patronising. Following! Thanks buddy!

@diyforknuckleheads 3 жыл бұрын

Awesome, thank you H.M! Glad you found it useful and thanks for watching 👍😁🇦🇺

@randyedgar1968 3 ай бұрын

You are fun to watch and are a great teacher.

@diyforknuckleheads 2 ай бұрын

Thanks Randy! Appreciate the feedback mate 👍😁🇦🇺

@thebasement7620 3 жыл бұрын

Great idea about the fence extension.. wish I had seen this a week ago would have made my project much easier -- well done..

@diyforknuckleheads 3 жыл бұрын

Cheers Todd.....glad you liked it mate and thanks for watching 👍😁🇦🇺

@katlescraftpatch9605 3 жыл бұрын

Top job on this video Uncle Knackers! This is so informative. Love it!

@diyforknuckleheads 3 жыл бұрын

Thanks Katie! Glad you found it useful....appreciate the feedback 👍 Cheers 👍😁🇦🇺

@aquatarkus2022 Жыл бұрын

Back for a second viewing. The jigs are a great help!

@diyforknuckleheads Жыл бұрын

Thanks mate! Glad you found them useful 👍👍

@timpenner7858 3 жыл бұрын

You show that you are deeply conscious of simplicity and clarity, making your explanations idiot-proof but not idiot-oriented. Well done!

@diyforknuckleheads 3 жыл бұрын

👍😁....Cheers Tim! Really appreciate the comment mate 👍😁🇦🇺

@rjserra5535 2 жыл бұрын

Thanks for the good ideas. I did not read through the comments below, but just in case no one suggested it I thought that I would mention the following: 1) You could improve your vee block for holding round dowels by gluing sand paper on the flats inside the vee. 2) When cutting the angle at the bottom corner of the stop block cut it at a compound angle so that the face of the cut is chamfered away from the fence. (I would suggest 60° to a sharp leading edge on the angle cut.) This would direct sawdust away from the fence as you slid the next piece of wood into the stop. It will save you from huffing and puffing as you make successive cuts. G'day from up here in the Northern Hemisphere.

@diyforknuckleheads 2 жыл бұрын

G'day R.J 👍 Great ideas mate.....l'll have to implement those 👍 Thanks for watching 👍😁🇦🇺

@G_Threepwood 3 жыл бұрын

Thanks mate, I learned a lot from this video. I'll definitely be making myself a zero clearance plate

@diyforknuckleheads 3 жыл бұрын

No worries Max....yeah go for the zero clearance plate mate....makes world of difference! Have a good weekend 👍🇦🇺😁

@wesman6445 2 жыл бұрын

I started watching this guy because he talks like an old video game I used to play on the Playstation 2. Ty the Tasmaian Tiger. Now I can't get enough. 👍

@greatfun7316 Жыл бұрын

I could hardly watch as I was in tears from the very start. 🤣😂You are so funny! Thanks for the good advice. Mrs. D. I. Y.

@dagored4077 3 жыл бұрын

I love the Fame on the wall. 'Measure twice, cut once' Great video as always. Cheers!

@diyforknuckleheads 3 жыл бұрын

Hahahhahha....yeah that frame is a little constant reminder for me Brian 😂 Glad you like the video mate and thanks for watching 👍😁🇦🇺

@GardenKatt 3 жыл бұрын

I just started woodworking this year and have had all these issues. Thank you so much for your help.

@diyforknuckleheads 3 жыл бұрын

No worries Kathy!...glad to help👍😁🇦🇺

@JonMaynard 2 жыл бұрын

The little cut out on the bottom corner of the stop block is genius!

@diyforknuckleheads 2 жыл бұрын

Yeah it works really well Jon 👍

@stephenquirke9466 3 жыл бұрын

You were the first diy guy I watched. Built a shed based on your advice and on your saw horses. Seven years ago. Where did that go. Great video uncle knackers.

@diyforknuckleheads 3 жыл бұрын

Cheers Stephen and thanks for sticking around Soooooo long! Really appreciate the support mate 👍🇦🇺😁

@jessemiller8818 3 жыл бұрын

Thanks for this one! My brother-in-law just asked me if I wanted his old Miter Saw! Perfect timing.

@diyforknuckleheads 3 жыл бұрын

Awesome! Great timing Jessie 👍🇦🇺😁

@gwarlow 3 жыл бұрын

The 45 degree notch in the stop block: shear genius. Cheers.

@diyforknuckleheads 3 жыл бұрын

Thanks Gordon 👍👍

@JustAnotherConspiracyTheorist 3 жыл бұрын

That was my favorite.

@spuds6423 3 жыл бұрын

@@diyforknuckleheads how did you make it???🤔🤔🤔🤔

@Any_Halfs 3 жыл бұрын

Number 7 is the one I was waiting for

@diyforknuckleheads 3 жыл бұрын

Awesome! Thanks for watching Tony 😁🇦🇺👍

@chriswilliams5498 10 ай бұрын

Just had a "ahaaaa" moment watching this. Been struggling to get clean cuts, and not too keen with doing the small cuts. Thanks Knackers. Love ur work.

@diyforknuckleheads 10 ай бұрын

No worries at all Chris! Thanks for taking the time to watch mate 👍😁🇦🇺

@jill-of-all-trades 3 жыл бұрын

You bloody beaut mate. Great tips. Thx! (It’s a “sliver”: Snakes slither but miter saws sliver.)

@diyforknuckleheads 3 жыл бұрын

Hahahahahaha...yeah,.....bit of a faux pas there....Got my "ithers" mixed up with my "ivers" 😂 Thanks for watching 👍🇦🇺😁

@jill-of-all-trades 3 жыл бұрын

DIYForKnuckleheads 🤣🤣🤣

@wesleymallin9509 3 жыл бұрын

Once again you're a genius. I've been woodworking for years and never had need of a mitre saw other than rough cutting. Started doing finer work and was really disappointed with the accuracy of my new saw. This puts me back on track so I can get on and make the things in my head. Loving the presentation style and a no-nonsense approach. Top work fella.

@diyforknuckleheads 3 жыл бұрын

👍.....Thanks Wes........appreciate the comment mate 😊👍

@ctrlaltdebug 2 жыл бұрын

I got a mitre saw first, and regret not getting a table saw first.

@paultavener825 3 жыл бұрын

Very useful and presented with great humour

@diyforknuckleheads 3 жыл бұрын

Thanks Paul. 👍🇦🇺😁🇦🇺

@billbrown3720 3 жыл бұрын

Excellent!!!👍

@diyforknuckleheads 3 жыл бұрын

👍😁 Thanks Bill 👍😁🇦🇺

@Sparkykab 3 жыл бұрын

Loving the channel, this video has helped me decide I need to buy a Mitre - great tip Knackerrrrrrrrrsssss!!

@diyforknuckleheads 3 жыл бұрын

Good stuff Kev!...go out and get one mate..they're awesome 👍🇦🇺😁

@andrewrice2820 3 жыл бұрын

Absolutely genius mucka,,,great tips delivered with a great sense of humour,,, thoroughly enjoyed so well done indeed !!... :)

@diyforknuckleheads 3 жыл бұрын

Thanks Andrew....really appreciate the comment mate 👍. Have yourself a great weekend👍🇦🇺😁

@antoniowade3318 11 ай бұрын

Outstanding video, I really enjoyed your humor and safety protocol .. Thanks again, Wade Out.

@diyforknuckleheads 11 ай бұрын

No worries at all mate! Glad you found it useful and thanks for taking the time to watch. Cheers 👍😁🇦🇺

@various6306 2 жыл бұрын

This is the Jim Henson of the DIYers

@hjnPhilly31 3 жыл бұрын

Bonus extension fence tip: If you have a spare speed square, you can just use that as the stop block on your extension fence.

@diyforknuckleheads 3 жыл бұрын

Spot on!....thanks mate....great tip 👍😁🇦🇺

@davidelliott5843 3 жыл бұрын

A 1cm batten glued you your stop block let’s it sit on your extended fence. Much easier to clamp in place.

@FirstLast-om8li 3 жыл бұрын

@@davidelliott5843 yeah that's what I do just use one of those quick clamps to clamp the square to it. EDIT: oops meant @OP

@chubbinator35 2 жыл бұрын

I just use the clamp as a stop block...

@XAnonymousGuyX1 3 жыл бұрын

I’ve got a 12” dewalt miter saw that’s about 10yrs old and also done thousands of cuts. Still going strong. They’re great machines.

@diyforknuckleheads 3 жыл бұрын

Yeah they're an awesome machine mate 👍👍😁

@gullu1276 Жыл бұрын

thanks u 👍👍👍✌️✌️✌️ for amazing work on KZfaq

@diyforknuckleheads Жыл бұрын

My pleasure Gullu! Appreciate your support 👍😁🇦🇺

@GotEmAll1337 2 жыл бұрын

That little 45° notch tip was brilliant!

@diyforknuckleheads 2 жыл бұрын

Works like a charm Austin 👍👍

@DadcraftColorado 3 жыл бұрын

I'm from the US and I call it a mitre saw!

@diyforknuckleheads 3 жыл бұрын

Yeah l've heard you guys use both terms so l thought l'd better Chop Saw in.....people can be pretty picky on KZfaq 😂

@emceeboogieboots1608 3 жыл бұрын

But you spell it mitre not miter? Are you really from the US! Or is your spell checker set to UK English 😁

@rabie4x4 3 жыл бұрын

An old carpenter once told me the original term was "shop saw" as these were commonly found in wood working shops rather than out in the field like more portable circular saws. Along the way a lot of people, (including me), just started calling them "chop saws" for some reason.

@markbrowning4334 2 жыл бұрын

I've always heard "chop". It makes sense. You're chopping off a section of product.

@justicekragiel 2 жыл бұрын

This one earned you a follow. Bought my first miter saw today and all of these tips will come in handy. Thank you!

@diyforknuckleheads 2 жыл бұрын

Thanks J.K. and good luck with the Miter Saw 👍😁🇦🇺

@krishanramsammy4349 3 ай бұрын

Thank u sir 🙏🏽ur knowledge is greatly appreciated...wished my dad was like u altho he's a joiner and carpenter he never teaches me anything or even try 😢 then he be angry at me for not knowing 😢😢😢all ik is from watching ur channel and some other guys i really have learnt alot from u☺️ may u continue to be blessed in every way possible 🙏🏽❤️

@johnluther161 3 жыл бұрын

Thank you for putting safety first in your videos! Hearing protection and Glasses are so often neglected in these DIY videos. I loved your jig in tip number seven for holding small pieces near the blade. I have unsuccessfully tried several variants of “holding sticks” and look forward to trying your version. BTW - Do you have to tune your miter saw to maintain a perfect 90 degree vertical and horizontal cut ie., no bevel and perfectly square? Thanks for the video! Well done mate!

@diyforknuckleheads 3 жыл бұрын

Thanks John!....appreciate the comment mate. I think l've been lucky with my saw....l've had it for a long time and have never had the need to adjust it for square. Have a good one mate 👍😁🇦🇺

@suziemack7269 3 жыл бұрын

Thank you for these great tips. I recently got a saw and am a bit scared when using it, but these tips have been great. (New subscriber!)

@diyforknuckleheads 3 жыл бұрын

Thanks Suzie!....glad to help👍 Thanks for watching and for the Sub!.....much appreciated 👍😁🇦🇺

@someguyontheinternet- 3 жыл бұрын

Being scared of a powered saw means you're much more intelligent than some of the guys I've worked with.

@craniumrex4614 11 күн бұрын

New mitre saw user here - wow, amazing tips and so well presented. You’re educational and entertaining. Greetings from your Canadian cousin! 🇨🇦

@diyforknuckleheads 10 күн бұрын

Thanks mate....glad you found it useful. I'm actually putting out a Mitre Saw Masterclass in about a month or so. If you're interested stay tuned to the Channel for Launch details. Cheers 😁🇦🇺👍

@mmay1357 3 жыл бұрын

Following for Part 2

@JuiceBanger1 3 жыл бұрын

Ohhh, a removable zero clearance plate by setting on. Never heard this one b4

@diyforknuckleheads 3 жыл бұрын

Yep 👍👍 Thanks for watching mate 👍😁👍🇦🇺

@jriis2010 3 жыл бұрын

Again another excellent video for an absolute beginner wood worker as myself. How on earth did you come up with the corner cut on that stop block. Great tip !! :-)

@diyforknuckleheads 3 жыл бұрын

Thanks Jan 👍👍 Glad l could be of assistance mate......the corner cut came from trial and error 😊 Have a good one 👍🇦🇺😁

@socrates2890 Ай бұрын

All brilliant tips ... thank you!!! 🏆🙌🏼

@diyforknuckleheads Ай бұрын

No worries at all mate! gLAD you found them useful 👍🇦🇺😁

@sanjivnaik6865 2 жыл бұрын

Great tip regarding zero clearance 👍

@diyforknuckleheads 2 жыл бұрын

Thanks Sanjiv 👍😁

@johnbiggscr 3 жыл бұрын

I’m totally new to woodworking but looking at that dowel jig I wondered if it would be worth making it kind of like the zero clearance plate. I thought I saw ripping on the dowel so could you have a longer jig to rest the dowel in, with a channel cut into it half way along, that goes below the join of the V, to lessen ripping and to hold the dowel piece you just cut? Would that work or am I missing something?

@diyforknuckleheads 3 жыл бұрын

Na that sounds like it would work John.....good tip 👍🇦🇺😁

@jenahammond111 Жыл бұрын

Husband bought me a collapsible stand for my Dewalt mitre saw. Makes moving it so easy!

@diyforknuckleheads Жыл бұрын

Yep...they're really good Jennifer 👍😁🇦🇺

@lsieu Жыл бұрын

I REALLY appreciate this video. I just bought my first compound miter saw. All of these tips are wealth of the right kind of information! Thank you!

@diyforknuckleheads Жыл бұрын

Glad it was helpful! Thanks fir watching and for the feedback 👍😁 Good luck with the new saw 👍😁🇦🇺

@lsieu Жыл бұрын

@DIYForKnuckleheads Thank you! I'm headed for Home Depot tomorrow to buy wood for the fences. I especially liked the advice about preventing tear outs. ..now...where did I put my red fingernail polish?

@diyforknuckleheads Жыл бұрын

@@lsieu Good luck with fence....and the nail polish! 😁 👍

@Kunfucious577 3 жыл бұрын

There is so much common sense problem solving in home improvement. Im constantly say,"duh?" to myself.

@kuffyswoodwork 3 жыл бұрын

I've lost count of the number of people I have threatened with instant dismissal from work (building roof trusses) because they are crossing their arms up as demonstrated in tip No. 2. They won't lose a thumb or a tip of a finger, they'll lose half their bloody arm! They insist on using their dominant hand to control the saw and pull the trigger. An explanation of what will happen to their arm along with the threat of dismissal is the only thing that stops them.

@diyforknuckleheads 3 жыл бұрын

Kuffy, when l was a young bloke in the 80's we did a shit load of house frames around Sunbury and Taylors Lakes. Back in the day all the frames were stick frames so we had a guy come in to cut the studs. He was a professional who cut studs 8 hours a day, every day and that's how he used to cut!!!! It was mental.! Have a good one Mae 👍🇦🇺😁

@Jaji813 3 жыл бұрын

Most likely they are left-handed. I find myself doing it sometimes. The left-hander's struggle is real ya'll!

@diyforknuckleheads 3 жыл бұрын

@@Jaji813 Being a left-hander Janette l know what you're talking about 👍

@Dallas_the_III Жыл бұрын

Love the zero clearance idea! Great stuff

@diyforknuckleheads Жыл бұрын

👍😁....Cheers Dallas! Thanks for watching mate 👍😁🇦🇺

@wiredawg2005 Жыл бұрын

Outstanding tips, thanks for posting!!!

@randallriley9320 2 жыл бұрын

Very practical and great entertainment value too!

@diyforknuckleheads 2 жыл бұрын

Cheers Randall! Glad you liked it mate 👍😁🇦🇺

@Canosa612 Жыл бұрын

You should have 327M subscribers. Your videos are great. You humor is spot on (makes me laugh). Always find your videos informative as never too stuffy. Cheers mate.

@diyforknuckleheads Жыл бұрын

Thanks MO! Really appreciate that mate 😁🇦🇺👍

@knightsway100 3 жыл бұрын

I’m 65 and you just learnt me stuff I never even knew. Brilliant video and well explained. 👌

@diyforknuckleheads 3 жыл бұрын

👍....Really appreciate the comment Andrew 😁 Thanks for watching mate 👍😁🇦🇺

@priyacomputers Жыл бұрын

Your teaching way is awesome... 👍👌❤️

@diyforknuckleheads Жыл бұрын

👍😁...Thanks Priya....appreciate the feedback 👍😁🇦🇺

@thomasclarke8220 2 жыл бұрын

Great stuff for this American beginner!

@diyforknuckleheads 2 жыл бұрын

👍😁....No worries Thomas! Glad l could help mate and thanks for watching 👍😁🇦🇺

@billofalltrades1468 3 жыл бұрын

Great tips, especially the stop block tip about letting the blade stop.

@diyforknuckleheads 3 жыл бұрын

Cheers Bill! Glad you found it useful mate 👍😁🇦🇺

@billofalltrades1468 3 жыл бұрын

@@diyforknuckleheads i always wondered why they did that in videos.

@elizabethmims568 2 жыл бұрын

I’m so glad I have found you.

@diyforknuckleheads 2 жыл бұрын

Welcome aboard Elizabeth 👍😁 Great to have you here 👍😁🇦🇺

@ypaulbrown 3 жыл бұрын

Brilliant from the USA

@diyforknuckleheads 3 жыл бұрын

Thanks Paul 👍😁🇦🇺🇦🇺