FZ-09: Replacing Front Sprocket, This Bike Don't Have Enough Torque 😆

Рет қаралды 5,992

To Mod or Not to Mod

Күн бұрын

Come with me to walk you through the process of of how to replace the front sprocket on your Yamaha FZ09.

Пікірлер: 22

@joserafa03 2 жыл бұрын

That was a lot of dirt on the whole chain and sprockets assembly so It sure makes a big difference to keep it clean and lubed, also finding that loose nut holding the front sprocket could have caused a major repair eventually! I loved the way you made the whole chain adjusting look so smooth ! I like the final look ! 🇵🇷

@dannomight1980 Жыл бұрын

I just ordered a -1/+1 sprocket and chain combo for my 2017 09. Thank you for the vid and I'm sure I'll be rewatching as I do mine sometime next week :D

@ToModorNottoMod 9 ай бұрын

Soooooo how is it! Did you install it? I am running -1 +2 and it’s too much but I love it

@stevenfortier6436 2 жыл бұрын

Lol..had the same problem with nit having the front sprocket size. Always had Triumphs before

@hw_moto8409 Жыл бұрын

Thank you for sharing this video with important information 👍. A month ago I bought my Tracer MT09 but I hear a slight rattling behind the sprocket cover. Following your tip I will check if the nut behind the sprocket cover is tight enough.

@ToModorNottoMod Жыл бұрын

Oh man please do. I hope is just the chain needing some adjustment. Thanks for your comment! Have an amazing day brother!

@johnnyjohnnyp7786 2 жыл бұрын

Great job.

@trailrider1980 2 жыл бұрын

Great video but I no longer have the mt09. I have a gsxs and have followed or done all of your mods and maintenance (coolant flush coming soon). Please install/replace the brake lines of the gsxs1000 to steel braided brakelines so I can do it as well lol...

@ToModorNottoMod 2 жыл бұрын

I have some GSX-S1000 co tent coming as well. Not a bad idea I have been thing about swapping my brake lines.

@trailrider1980 2 жыл бұрын

@@ToModorNottoMod keep them coming!

@JasonLeVlogs 2 жыл бұрын

I did 15T a few days ago. It's too much for me 😂 front end always want to come up when I'm shifting gears

@ToModorNottoMod 2 жыл бұрын

Hahahaha I love that! This bike is too much fun!

@robertpatey2355 Жыл бұрын

Do you have a video on how are you liked the results of after changing the front sprocket to a 15 tooth??

@ToModorNottoMod Жыл бұрын

Not specifically. I think it feels right, but even though changes in the front are equivalent to 3 in the rear I was expecting a much more drastic change. It does not help the fact that I am running -2+3 on my GSX. 😂. The acceleration is faster, To me it felt like the right change for the type of riding I do. I rode my bike around 40 mikes on highways speeds 80-90 mph and the bike feels perfect, not strangled like my GSX and also feels super responsive on dirt. If you are thinking about it, you will not regret it.

@kart1241 Жыл бұрын

Pull back the rubber shift linkage boot and remove the allen headed end link… no realignment, no prying.

@sirsmokealotofkush5857 7 ай бұрын

Ohh shit ive always done it to spec on the paddock stand would it be much difference going to the side stand. Have i just overloaded my drive shaft and engine 😢😮

@Transilvanian 2 жыл бұрын

I replaced the chain and sprokets on my gsxs1000 and the front sprocket nut was very loose aswell never been touched sinsce bought new

@ToModorNottoMod 2 жыл бұрын

That's crazy. I have never had one come off that I have taken off or from a bike I had purchased, but I'm glad I was able to spotted it. So glad you were able to take care of that and have the peace of mind that it's good now.

@sapbike3916 2 жыл бұрын

Bike has 16k miles on it i was very surprised to find the nut so loose that it spun only with the weight of the breaker bar

@ToModorNottoMod 2 жыл бұрын

@@sapbike3916 damn man. Crazy!

@Greg.Barrow 2 жыл бұрын

I just changed mine to 15T I've noticed the chain has tight and slack points now, is it possible to put the new sprocket within the wrong links of the chain if you know what I mean

@ToModorNottoMod 2 жыл бұрын

Hey Greg, not really the as long as the sprockets and the chain are the same pitch, meaning both are 520 or 525 or 530 it should fall in place with no special process. How old is the chain? Has the chain being maintaned well? Maybe has developed kinks because it's streched and you may be needing a new one?