MYTH BUSTED!! Touchless car wash??

Рет қаралды 195,594

Күн бұрын

MYTH BUSTED!! Touchless car wash?? In this episode, I test to see if there is such a thing as a touchless car wash. Can you fully clean your car without using any wash mitts of brushes? Let’s find out!
▶️ SUBSCRIBE, SHARE and LIKE today’s video & Turn On Notifications for New Videos - bit.ly/PanTheOrganizer
⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️
🇺🇸 For people in USA:
Bilt Hamber Touch-Less snow foam: bit.ly/44nTnxn
MJJC Foam Cannon Pro: amzn.to/3wKOcFH
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Mosmatic gun and wand solution: bit.ly/3ovIcPA
Hyper Foam Wheel Cleaner & Tire Prep: amzn.to/3xT9wKR
All Wheel Cleaner + Iron Remover: amzn.to/3DqIYBQ
EGO blower: bit.ly/3KsY1k7
🇨🇦 For people in Canada:
Bilt Hamber Touch-Less snow foam: bit.ly/3qSvqwl
MJJC Foam Cannon Pro: bit.ly/3ltOq3r
Kranzle 1122TST pressure washer: bit.ly/3MgYINZ
Mosmatic gun & wand solution: bit.ly/3EBUZbI
Hyper Foam Wheel Cleaner & Tire Prep: bit.ly/3rAqyMU
All Wheel Cleaner + Iron Remover: bit.ly/3ol1F5F
EGO blower: bit.ly/3KsY1k7
🇬🇧 For people in the UK:
Bilt Hamber Touch-Less snow foam: bit.ly/3Rrx6XG
MJJC Foam Cannon Pro: bit.ly/3SQmSRJ
Kranzle 1122TST pressure washer: bit.ly/3d5kZeK
Mosmatic gun and wand solution: bit.ly/3ovIcPA
Hyper Foam Wheel Cleaner & Tire Prep: bit.ly/3e88God
All Wheel Cleaner + Iron Remover: bit.ly/3CBlXyT
🇫🇷 For people in France:
Bilt Hamber snow foam: amzn.to/3o9TOKL
MJJC Foam Cannon Pro: amzn.to/3KBiD9P
Kranzle pressure washer: amzn.to/41tRRan
Hyper Foam Wheel Cleaner & Tire Prep: amzn.to/3MH74k5
All Wheel Cleaner + Iron Remover: amzn.to/3o6ebIx
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission on a purchase without additional cost to you. If you do purchase through my affiliate links, thank you so much for your support!
Watch more of my videos:
✅ How to wash your car like a pro: youtu.be/
✅ Do snow foams actually work? • Do Snow Foams Really W...
✅ Battle of foam cannons: which one is the best? • FOAM CANNON BATTLE !! ...
🎶 MUSIC I USE IN MY VIDEOS - Referral link, get a free trial by clicking below!
www.epidemicsound.com/referra...
Welcome to Pan TheOrganizer, one of the biggest car detailing channels on KZfaq, here to help you with fun and entertaining tutorials, tips, tricks, products and equipment reviews!
👍🏼 Click the like button if you enjoyed the video and share it with your friends and family. Don’t forget to SUBSCRIBE to my channel and activate the notifications (the bell icon) if you want to be notified every time I upload a new video. Welcome to the Pan TheOrganizer family!!
👕 My merchandise store: pantheorganizer.creator-sprin...
🎥 List of equipment I use to produce my KZfaq videos: • My New 4K Camera Gear!!
📲 Follow Pan TheOrganizer:
Instagram, TikTok, Facebook & Twitter: @pantheorganizer
🌐 Visit my official website: pantheorganizer.com
🎶 Intro music by Hurley Mower
/ hurleymower
#touchless #carwash #detailing #cardetailing #cleaning #pantheorganizer #detailingtutorials #autodetailing

Пікірлер: 494

@PanTheOrganizer Жыл бұрын

⬇️🔶 LINKS TO PRODUCTS MENTIONED IN THIS VIDEO ⬇️⬇️ 🇺🇸 For people in USA: Bilt Hamber Touch-Less snow foam: bit.ly/44nTnxn MJJC Foam Cannon Pro: amzn.to/3wKOcFH Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Mosmatic gun and wand solution: bit.ly/3ovIcPA Hyper Foam Wheel Cleaner & Tire Prep: amzn.to/3xT9wKR All Wheel Cleaner + Iron Remover: amzn.to/3DqIYBQ EGO blower: bit.ly/3KsY1k7 🇨🇦 For people in Canada: Bilt Hamber Touch-Less snow foam: bit.ly/3qSvqwl MJJC Foam Cannon Pro: bit.ly/3ltOq3r Kranzle 1122TST pressure washer: bit.ly/3MgYINZ Mosmatic gun & wand solution: bit.ly/3EBUZbI Hyper Foam Wheel Cleaner & Tire Prep: bit.ly/3rAqyMU All Wheel Cleaner + Iron Remover: bit.ly/3ol1F5F EGO blower: bit.ly/3KsY1k7 🇬🇧 For people in the UK: Bilt Hamber Touch-Less snow foam: bit.ly/3Rrx6XG MJJC Foam Cannon Pro: bit.ly/3SQmSRJ Kranzle 1122TST pressure washer: bit.ly/3d5kZeK Mosmatic gun and wand solution: bit.ly/3ovIcPA Hyper Foam Wheel Cleaner & Tire Prep: bit.ly/3e88God All Wheel Cleaner + Iron Remover: bit.ly/3CBlXyT 🇫🇷 For people in France: Bilt Hamber snow foam: amzn.to/3o9TOKL MJJC Foam Cannon Pro: amzn.to/3KBiD9P Kranzle pressure washer: amzn.to/41tRRan Hyper Foam Wheel Cleaner & Tire Prep: amzn.to/3MH74k5 All Wheel Cleaner + Iron Remover: amzn.to/3o6ebIx

@bravebrowser261 Жыл бұрын

Pan I know it’s a pain in the arse but all the Amazon links say products unavailable it’s worth fixing as I was going to buy the snow foam

@johnmachter40 Жыл бұрын

hi Pan, can i measure the ph of the foam from my local manual washpark with a ph test stripe after i sprayed the foam onto my car or can it be only measured in the concentrate form from the bottle?

@podcastostories 5 ай бұрын

Try Magic Stick from Greece and thank me later

@autowerkesexclusive Жыл бұрын

Great video Pan. Two things to consider. We’ve been playing with foam cannons and cleaners for about 20 years. I’ve found two things to work better when using foams. Don’t let it soak that long. We foam, reinstall the tip in the pressure washer lance and rinse right away. Usually the foam is on the car for 1-2 minutes tops. Always rinse from the bottom up. These foams are designed to suspend the dirt and use the high pressure rinse to lift the dirt from the surface. Rinsing normally from the top down will rinse the cleaner away before the high pressure rinse can do it’s job. We consistently get better results doing these two things. I know you’re following manufactures recommendations, but I’d be interested to hear your thoughts.

@donmckinney4091 Жыл бұрын

That sounds good but what about using a mit and the two bucket method after you've applied the foam?

@felipe_silve Жыл бұрын

I've indeed found that rinsing from bottom up gives better results

@axe2grind244 Жыл бұрын

@@donmckinney4091 I’d probably ask you why you’re using a TOUCHLESS foam if you were going to wash the car traditionally anyway. Did you not catch the title of the video, or even watch it lol?

@donmckinney4091 Жыл бұрын

@@axe2grind244 -Sure did but when I go out of town to see my family especially in the winter months I go to a local touchless car wash for my truck. But when I'm in my home state I hand wash it. See how easy that was Einstein? But I'm sure you had a rough time grasping that right?

@johnmachter40 Жыл бұрын

@@donmckinney4091 you wrote you want to apply a mit after you sprayed the touchless foam on it. that indeed doesnt make sense.

@brianhickey5949 Жыл бұрын

You make an excellent point with the PIR. On those vehicles with heavy mud and road grime, the higher PIR will do the better cleaning. For maintenance washes, the lower PIR (around 1) will do the cleaning with minimal wear and tear on the protection. As a rule, I apply protection in the form of a sealant or sealant and wax on any vehicle that isn't on a maintenance schedule. This gives the customer the benefit of high gloss and solid protection for as long as possible. Thank you for the excellent video! I have to admit, I would not consider a touchless wash on any vehicle as my obsession with cleanliness won't allow it - I have to do a contact wash as well :)

@TJZTechShow Жыл бұрын

Excellent video Pan! IMO touchless washes are great for getting a 75 - 85% clean. Important to only blow dry when doing touchless washes since there are still some remaining contaminants on the surface

@beerstein7137 Жыл бұрын

While going through my last winter wash at a local gas station, I thought about an idea for an episode(s) for your channel. During the winter months most of us living in sub freezing temperatures have no option but to use drive-through car washes. If you can come up with way to compare the different car washes in terms of the quality of the products use, the cleanliness of the water ( recycled water ?), effectiveness of the pressure cleaning / drying etc

@z-prodidsanziiprod6090 10 ай бұрын

exact Same concern here! cannot find any info about these auto Car wash machine

@Shadow-7773 3 ай бұрын

@@z-prodidsanziiprod6090 YES! Absolutely do not take your vehicle through an automatic car wash because it IS very bad for your vehicle's paint finish!

@ShotInTheDark Жыл бұрын

Thanks for confirming what I suspected, great to see it backed up with tangible evidence, and that’s how you’ve built your reputation. I’m lazy and been missing the contact wash in my regime, definitely makes me rethink my strategy.

@PanTheOrganizer Жыл бұрын

Thanks for the kind words. It’s nice to see that my efforts to make thorough tests is appreciated by you guys in my audience.

@TheCarDetailingChannel Жыл бұрын

I just washed my car in a similar touchless way. If your car is coated and you only have about a week or two of dirt on it, I’d say you can get your car 90% clean (except in the winter months)

@Static_MK3Focus Жыл бұрын

Pan is the staple for testing the limits of these things we do just about every time we detail. Probably one of the best I know in the business. Well done sir

@PanTheOrganizer Жыл бұрын

Thanks Brandon!

@KonstaNykanen Жыл бұрын

Good to see Andy again back on the channel! This video really proves the point that a contact wash is always needed to remove the small ammount of dirt left behind by the pre treat/pre wash stage👌🏻. Great work Pan!

@PanTheOrganizer Жыл бұрын

Thanks Konsta!

@KonstaNykanen Жыл бұрын

@@PanTheOrganizer 👍🏻❤️

@thatguy7085 Жыл бұрын

Yes, contact is needed. However it is always best to get as much of the dirt off first before pushing the dirt into the car finish.

@KonstaNykanen Жыл бұрын

@@thatguy7085 Exactly👍🏻

@danielgawrys1382 Жыл бұрын

Another good informative video. The touchless products have their usefulness, but there is no substitute for a good contact wash. Nice that you and Andy were helping each other out while educating your viewers. keep up the good work.

@PanTheOrganizer Жыл бұрын

Thanks Daniel!

@acetospace6 Жыл бұрын

Was very curious about this and was glad to see that you made a video for it. Super knowledgeable as always, thanks Pan!!

@PanTheOrganizer Жыл бұрын

Thanks Anna!

@darenwaters1469 Жыл бұрын

Thanks Pan. Great video, your expertise are greatly appreciated.

@PanTheOrganizer Жыл бұрын

Thanks Daren!

@WorldOf173 Жыл бұрын

THE MOST CONSISTENT CREATOR AND WHO KEEPS REPLYING TO THE COMMENTS! LOVE YOU BRO. GREETS FROM AMSTERDAM

@PanTheOrganizer Жыл бұрын

Thanks! Cheers from Canada!

@amsdetailing Жыл бұрын

I think a contactless wash is best used for maintenance washes. This car was pretty dirty, to begin with. You're the man Pan

@PanTheOrganizer Жыл бұрын

😁👍🏻

@dannysandoval5195 Жыл бұрын

Excellent video Pan on touchless wash. Never knew about Bilt Hamber touchless.

@PanTheOrganizer Жыл бұрын

Thanks Danny!

@dvinpeace Жыл бұрын

Great in depth video like usual! Thank you 😊

@PanTheOrganizer Жыл бұрын

Thanks!

@ownedant8026 Жыл бұрын

I have been getting really deep into washing my personal vehicle. While you talk about all these brands i usually like to stick to a single brand and that brand is Adams Polishes. (Good discounts every month) but watching your videos have me understand the importance of the products being used and its really helpful!

@PanTheOrganizer Жыл бұрын

Thanks for the feedback. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 885,000 subscribers and we have over 113 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ownedant8026 Жыл бұрын

@Pan The Organizer I started watching car detailing videos a few years ago, but it was not until recently when I decided to make the change of trying it out myself. I am watching review videos on products to see what to expect to compare my results with the brand I usually use to what I see in the videos. Your videos came up a lot when looking at product reviews and wow! You bring a lot of knowledge to the table, and it really helps a beginner like me learn!

@seethruhead7119 Жыл бұрын

I do this method all the time. But I add 1 minute worth of scrubbing with the wheel brush on the wheels/tires. Just a quick agitation takes almost no time before you apply the snow foam.

@decker0373 Жыл бұрын

Thanks for the content Pan.

@PanTheOrganizer Жыл бұрын

You bet! Thanks for watching!

@neilwalker5041 Жыл бұрын

Excellent video Pan and hello Andy! Pan has done his research on touchless products and thank you for sharing your knowledge. Looks like we are going to have to do a contact wash unless you just want to use a lot of product and water and time repeating the touchless cycle. I hope you and your family are doing well!

@PanTheOrganizer Жыл бұрын

Thanks Neil. We’re doing well and I hope you are too!

@bigd9848 Жыл бұрын

Very informative video Pan 👊🏼

@PanTheOrganizer Жыл бұрын

Thanks D!

@rooboy99 Жыл бұрын

Great info. Thanks for the video. I've never been a believer in contact less washes.

@PanTheOrganizer Жыл бұрын

👍🏻

@flytyingguy1 Жыл бұрын

Andy’s smart when his car gets dirty he brings it to Pan!😂😂😂

@PanTheOrganizer Жыл бұрын

😂👍🏻

@shawnyanak1684 Жыл бұрын

Great Video Pan!!! Andy is Lucky to have a Great Brother to wash his vehicle.

@PanTheOrganizer Жыл бұрын

Thanks Shawn!

@SJP1504 Жыл бұрын

Hi Pan, thanks for the vid! Have you also seen the Dutch company dedicated especially to touch less washing, very interesting and cool to see!

@dichicodetails4994 Жыл бұрын

Another great video PAN.

@PanTheOrganizer Жыл бұрын

Thanks!

@JustProAutoDetailingInc Жыл бұрын

Hello from Chicago! You and I met a few weeks ago at The Bays Romeoville, Illinois location and talked a little bit about my experience with Jescar UltraLock (ceramic). The first time I washed the car was after applying UltraLock was after Chicago Streets and Sanitation workers applied more salt and sodium chloride to the roads than measurable snow. Needless to say, my Subaru Outback was coated with salt a sodium, and crud. When it came time to wash, I applied a ph neutral car shampoo for the UltraLock’s first wash, I was amazed as all the salt, sodium and road grime simply slipped off the car and onto the alley during the rinse. For a moment, I thought I discovered a car detailers nirvana! However, the second wash left grime and the third wash left grime. You’re right-touch less car wash is a myth! Thanks for the video!

@nuclearpistachio Жыл бұрын

hey pan, entertaining and informative as always. i just read this morning it’s not advised to used iron fallout remover weekly. is this paintwork only or should i not be using these red/purple sprays on my wheels during my weekly wash?! thanks!

@mythosarts Жыл бұрын

I detailed the X3M yesterday and was humming/muttering a beat the whole time. Had no idea what beat it was until I just watched this video… it was your intro beat 😂! I obviously watch your videos on repeat sim nights lol.

@PanTheOrganizer Жыл бұрын

😂😂👍🏻👍🏻👍🏻

@jeremykoehn4004 Жыл бұрын

I would love to see a comparison with this foam versus a rinse less. Those companies feel like their product precleans very well

@piggietruckerjones7545 Жыл бұрын

Yes ! I have been wanting you to do something like this. I do this all the time. I follow up with a rinseless wash. Then while the surface is still wet I clay mitt as needed with properly deluted rinseless as clay lube.then just drying add with protection and done.

@PanTheOrganizer Жыл бұрын

👍🏻

@HardwareFRA Жыл бұрын

Perfect timing for the video! Merci à toi 😉

@PanTheOrganizer Жыл бұрын

Thanks!

@6u574v9 6 ай бұрын

great video, I think you are the only one that recommends doing a contact wash after the prewash, it makes sense, thanks.

@PanTheOrganizer 6 ай бұрын

Thanks! There’s no such thing as a 100% contactless car wash. All major detailing channels agree on that topic. How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 950,000 subscribers and we have over 125 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@prosperousson389 10 ай бұрын

Im waiting for this video! Thanks a lot!

@PanTheOrganizer 10 ай бұрын

You are welcome! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 910,000 subscribers and we have over 120 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@Hardcaslte Жыл бұрын

I use the Gyeon Foam Q2M for this and it works amazing. Let it sit 2 minutes and spray off. It's so good I may even replace my Brake Buster in my IK foam sprayer with the Q2M foam because it takes almost all brake dust off the wheel without touching it.

@bolgac Жыл бұрын

Great video as usual! Thanx for sharing. Is this method and products also applicable for cars which has PPF installed?

@PanTheOrganizer Жыл бұрын

Thanks! See my PPF maintenance and care tutorial here: kzfaq.info/get/bejne/f5lxpt2Kzb3Mo2g.html

@triplebpicturesllc9897 11 ай бұрын

Thanks, again, Pan! Learned a new trick. I have not been doing the vanity mirrors...but no more! 😂

@PanTheOrganizer 11 ай бұрын

You are so welcome! My latest video highlights areas commonly missed by people when detailing their car. Here’s the video: kzfaq.info/get/bejne/q82Ff5CU0LatZ4k.html

@donaldallison Жыл бұрын

Andy is lucky to have Pan as a brother who can help him out.

@chitterlingsrtasty Жыл бұрын

Pan is the brother for all of us! Lol

@Bull1the1Great Жыл бұрын

Pan is happy to have a presentation vehicle so close !

@whitsundaydreaming Жыл бұрын

It’s tough having to compete with a very handsome brother.

@PanTheOrganizer Жыл бұрын

😁👍🏻

@nuclearpistachio Жыл бұрын

since pans cars are pristine, it’s nice to see how the products work on a non-detailers car

@pillred5974 Жыл бұрын

PAAAN! The organiser is back, my wife will be pleased, good to have the full intro back I must play it to her lol.

@PanTheOrganizer Жыл бұрын

😁👍🏻

@MyGuyKirby Жыл бұрын

Same process on a modern car wash tunnel, high Ph foam, then contact with foam fingers. Just proves the contact method is still needed to remove the road grime that has built up.

@stayunique91 Жыл бұрын

I use Chem X Stars and Stripes and what I found is if I use it as a maintenance wash every week or 2 and the car did not see rain it works GREAT. Once I get outside of that 2 week window or if it rains and I don’t wash the car right away it doesn’t work very well and will require a contact wash.

@paulmorrow8372 Жыл бұрын

For a proper touchless wash, a 2 chemical system works great for myself. I am using Chem-X’s Stars & Stripes with great results. It is also helpful to have a high GPM machine for this. I am using a 4.5 GPM machine.

@davidgranados6708 8 ай бұрын

Nice video! Thank you!

@PanTheOrganizer 8 ай бұрын

Glad you liked it!

@J1Z06 Жыл бұрын

Welcome back, Andy! Your vehicle will ALWAYS be glossy and protected by Your fantastic brother and His skills. My take on this video, it's good for a "pre-soak" prior to a contact wash or if there's a ton of grit on the finish during fall/winter/spring(POLLEN!!!). I would have to do a contact wash after this as My OCD would make Me nuts. Regarding pollen(it's bad here) would You constantly use a rinseless/contact wash? Vs blowing it off with a leaf blower? I know pollen is abrasive, which is why I'm asking if the safest/best method is to use a foam/rinseless/contact wash? Thank You, and Thanks for bringing Andy back. 😎

@PanTheOrganizer Жыл бұрын

Good method Jay

@craigpierre2765 Жыл бұрын

Great video. Always nice to see a fellow Canuck making good content. This should raise everyones detailing skills up another level.

@PanTheOrganizer Жыл бұрын

Thanks Craig! :)

@klasseact6663 Жыл бұрын

I used both Bilt-Hamber Touchless and TWHS Hyper Foam today infact. In my case I actually ran it through a touch-free wash earlier and then, once I saw foliage and pollen on the car, I did the same thing you did on your bros car. Now my car wasn't dirty like his but it works for me to do a "pollen maintence wash" when it's HEAVY❗️ The TWHS Hyper Foam I actually used 3 brushes because I like CLEAN wheels but I only use this every so often, Brake Buster is my maintence go to wheel cleaner👌 Nice meeting you 2 weeks ago at CSW, hope you enjoyed the tacos, you needed a break, even the Rupes guy agreed☺️

@PanTheOrganizer Жыл бұрын

Hahaha they were cold by the time I got to them, after the event was over. But it was worth it just to meet my viewers in person. 😁👍🏻

@79blustone Жыл бұрын

I usually use 2-3 % PIR, as 5% isn't really needed unless it's been dirty for a couple of months. I wonder what a citrus cleaner would do behind what you've done already? Acid and alkaline together would actually make a pretty decent cleaner once every 6 months or so. Also Pan, you need to try Bilt Hamber Touch-on shampoo in the 30ml sachets with Touch-less snowfoam, it's a good combination 👌

@patrickdonahue777 Жыл бұрын

On a side note, Pan - your video showed why I don't like these new spray foaming wheel/tire cleaners everybody is putting out. I also go through about half a bottle per 4 wheels. That's $6 in product per wash!

@flowinthrou Жыл бұрын

It's rediculous, they hold for 1 or 2 washes

@jimshinosky9041 Жыл бұрын

@@flowinthrou I buy the Hyperfoam in a gallon container and dilute it about 3:1 in a foam pump sprayer. Goes a lot further and is way easier to apply than constantly pulling a trigger. Diluting it doesn’t seem to affect the cleaning power at all.

@flowinthrou Жыл бұрын

@@jimshinosky9041 I do this, too.

@patrickdonahue777 Жыл бұрын

After trying these type of products I've gone back to using Griots Foaming Tire Cleaner. You get the benefit of the foaming action and about 10-12 car washes out of 1 $8.99 aerosol can.

@josephdefreitas56 Жыл бұрын

Yet another amazing “Myth Buster” episode. These videos really do highlight the importance of not always believing the hype of a product. But Pan is also able to show how effective or ineffective a product really is. Excellent work as always!!

@PanTheOrganizer Жыл бұрын

Thanks Joseph!

@CARWASHCHANNEL. 5 ай бұрын

@@PanTheOrganizer you should do a review of chem x touch less soap it’s very good and it’s a100% true touch less soap

@SebtorDude Жыл бұрын

You can probably mix your own touchless cleaner by using autoshampoo/snow foam plus a regular alkaline cleaner (like KC Greenstar). According to my understanding you only need the consistency of the snowfoam to make the alkaline cleaner stay on the surface for longer. Snowfoam plus alkaline cleaner will give you just that.

@adhityamaralaut4371 Жыл бұрын

Much love on your video! Big fans from Indonesia!

@PanTheOrganizer Жыл бұрын

Thanks! How did you discover my channel? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 885,000 subscribers and we have over 113 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@adhityamaralaut4371 Жыл бұрын

@@PanTheOrganizer I found your channel on 31 December 22 when I was searching information between wax, sealant, coating, graphine, and your video is so well with the explanation and details. Since then, I watch most of your video and learn much about car cleaning to apply in my car. Also I start to buy product that you recommend such as turtlewax product line. They should thanks you because make the new customer like me from your video 😀 kudos to you sir!

@PanTheOrganizer Жыл бұрын

👍🏻

@jolmeaki Жыл бұрын

I use LA’s Totally Awesome for my wheels and tires. Works great and it’s only a $1. I do use a brush.

@Primus54 Жыл бұрын

I wonder what the results might have been if the vehicle had been pre-rinsed with the pressure washer, allowed to dry, THEN used the high pH snow foam. The foam had a pretty thick layer of dirt and grime to penetrate to get to the paint.

@kal3560 Жыл бұрын

As long as the dirt level on the car is very minimal yes you could try that. If there’s a good amount of dirt/road grime on the car don’t rinse the car first. Cause that will cause scratching with all the excessive dirt. A pre treat foam would be best first. Unless of course you don’t mind rinsing that dirty of a car.

@PanTheOrganizer Жыл бұрын

At that point just wash the car manually.

@Primus54 Жыл бұрын

I’m suggesting this as a test to see just how effective the foam would be, not as a recommended procedure.

@The1Music2MyEars Жыл бұрын

Technically, pressure washing while it's dirty is still not a form of touchless. You are using high pressure to blast dirt down and in and across the surface.

@simpletonballsack Жыл бұрын

@@The1Music2MyEars Technically, no.

@cardetailingcomparisons8961 Жыл бұрын

Pan I noticed the same thing about the Turtle Wax Wheel & Tire, you use a LOT of product. Also the foaming sprayer does tire out your hands very quickly. The product itself does work very well, especially with a tire brush

@PanTheOrganizer Жыл бұрын

Yes it's very good but you do end up using a lot.

@davolyncho5992 Жыл бұрын

My car was just as dirty yesterday, I used surfex in the cannon first then touchless, followed by hand wash, turned out perfect.

@reallyisitjustme 11 ай бұрын

Bilt Hamber Touch-Less foam works best when used as a system with Bilt Hamber Touch-On ceramic paint protection, after the initial wash and easy application, your car stays cleaner for longer and subsequent washes just require a blast with the Touch-Less foam until a reapplication of Touch-On is required depending on the time of year. I have had comments about how my car always looks clean despite not washing it that regularly.

@derbagger22 Жыл бұрын

My workhorse 2015 Lincoln MKS gets a full automatic contact wash hundreds of times per year. My wash package allows me unlimited passes. And some winter days, I may go through 3 times. But I keep it, clay bar'd, polished and waxed. It's got over 370k miles and while the finish is not showroom new, it still shines like crazy when clean...no touchless washes here...

@r.eed25 Жыл бұрын

Shine supply holeshot is my favorite pre foam

@GetOffMyyLawn Жыл бұрын

I started doing touchless washes in between full washes. I just pre-rinse with clear water, foam with regular car wash, and rinse. I will follow up with spray wax on the wet car and dry with very clean towels. I keep my car under a cover outside, and it does get a buildup of very fine dust after a rain.

@mikebonge7206 Жыл бұрын

I love that snow foam. Great information. I 😮

@PanTheOrganizer Жыл бұрын

👍🏻

@jbranstetter04 5 ай бұрын

I did the brushless automated car wash on my brand new Dodge truck from the very start. Car wash was close so I would drive it immediately home and park under the carport. I then had 25 or so microfiber rags pre wrung out. I would then, with a one-way motion, wipe the dirt away folding and turning the rag often. I also had a dry microfiber rag to wipe it all dry behind me. It worked great and for over 10 years I never had any micro scratches that I could see at all. It was a dark metallic paint. I was living in the eastern desert of Washington state at the time.

@m1keY_YOUTUBE Жыл бұрын

Best channel on YT ! But, I do hope You didn't allow him to leave without doing a proper wash on it 😋 The Pan-way 😎

@PanTheOrganizer Жыл бұрын

Thanks!! 👍🏻🤜🏻🤛🏻

@dini1046 Жыл бұрын

Andy back in the House! Hi Andy. Must be nice to have Pan helping with your car.

@PanTheOrganizer Жыл бұрын

👍🏻

@marcoaguiar3226 Жыл бұрын

I use Autobright magifoam and it has a great cleaning power as well.

@DjNikGnashers 11 ай бұрын

I would like to see a Bilt Hamber products test. I use BH auto wheel, and after trying at least 12 wheel cleaners, I found the BH product to be the best. It reacts the quickest as an iron fallout remover, yet it also has fantastic cleaning ability too. I use BH auto foam in an Auto Glym foam gun, which gives a thick foam, but not too thick that it doesn't do it's job which is to slide the dirt off the paint surface. Good to see you rinse top to bottom, which is always how you should imo. I see a few rinsing snow foam bottom to top, WHY ??? What is the point of rinsing the dirtiest part of a car (the bottom bit) upwards onto the cleanest part ? I think valeters and detailers who go against gravity also think the earth is flat too.

@jonbooth5995 Жыл бұрын

Pan, thanks for the video. Are those higher ph snow foams safe to use on coated cars?

@PanTheOrganizer Жыл бұрын

Only if used every week at 5% PIR. That's a bit too strong for continuous use. If used once in a while, every other month to remove grime and traffic film, no problem for true coatings (glass bottle types) as those can typically resist higher pH chemicals. But if you want to use it weekly, just use it at 2% PIR and that's fine.

@mujjuman Жыл бұрын

great tips thank u

@PanTheOrganizer Жыл бұрын

Thanks!

@DrazDetailing Жыл бұрын

Je pense que tu pourrais être excrément surpris par les performances du Traffic Film Remover de la gamme RR Customs Bad Boys. Il est presque équivalent au bilt hamber utilisable en canon à mousse ou juste en pulvérisateur classique

@ericptw6311 Жыл бұрын

Exact poour le RR .. par contre toi tu commence ton foam du bas vers le haut et Pan de haut en bas .. En fait y'a t'il vraiment un sens pour commencer un foam ???

@MikeD-ne6ie 11 ай бұрын

I was in the commercial carwash business for 25 yrs in the Fingerlakes region of upstate NY. We had a 100’ soft cloth tunnel, 2 touch less Laser washes, and self serve bays. We tried every chemical and combination of chemicals available. Road dirt and salt will generally be removed from vehicles with chemical and high pressure water, road film needs friction to be removed. The key is removing the abrasives before touching, as this gentleman states in this video.

@PanTheOrganizer 11 ай бұрын

Thanks for sharing your experience Mike. Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 895,000 subscribers and we have over 116 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@ThisIsMyStyleee Жыл бұрын

hey pan long time fan here, i have a question, i cant wash my car at home but i do at self car wash, so i use my own bucket washmit and products but would you use the snowfoam from the carwash or is it to agressive and its to big risc of damaging ceramic coating and its better to use pump foamer? greetings from Belgium

@lutherchinn446 Жыл бұрын

Is the turtle wax hyper foam safe if it gets on matte rims..Have a matte rim cleaner but i only use soap and water on tires because scared tire cleaner maybe to harsh for rims

@Derpn8r Жыл бұрын

1:38 where the a-pillar, door, window chrome and fender all meet..... dats some zoomzoom design level effort put ther

@steved7584 Жыл бұрын

Hi Pan, is it worth jet washing the vehicle first, then put the B-H foam on? I find if you do this the chemicals do a much better job of getting deeper in to the grime. P&S Brakebuster is my go to wheel and tyres, but is there something better for really dirty tyres initially? I'm about to do first cleans on my brothers cars for his garage, not to your or my level but a decent level, so was thinking a TFR (traffic film remover) as a first job, but seems the B-H is better? Where did you get the protector end on the car dryer, I have one of these and its great but sometimes just touch the car so a protected nozzle would be very good? Thanks for the info as always, my go to for anything I need looking at. Enjoy the spring!

@chrisryan8894 Жыл бұрын

Not bad at all for the time it saves of doing a full wash. Good for a mid week wash when time is limited

@SUPERBDETAILEDIT Жыл бұрын

I love the turtle wax wheels cleaners ❤

@Pack-zi1gt Жыл бұрын

Hi Pan. I use P&S Brake Buster often on my wheels & tires but it is my understanding that the product does not remove iron. Would you recommend alternating between P&S BB and other products that contain iron removing capabilities like the ones you featured in this video or should I follow P&S BB with an iron remover on the wheeIs? I like P&S because of the rust inhibitors.

@irdibasha391 Жыл бұрын

I first use an iron remover and let that sink in for 5 minutes , then pressure wash, after that use your regular wheel and rim cleaner

@79blustone Жыл бұрын

I've just got a litre bottle of Gyeon wheel cleaner with Iron removing capability, not used it yet but will use P&S BB afterwards to get a really deep clean

@pinoscoccia4997 Жыл бұрын

Andy sei un Grande!!!!! Hi Pan, if i have hard water, you sugest me to use a leafblower?

@Geeky_detail_reviews Жыл бұрын

Great video, showing the difference and real world evidence of SFs. They certainly help but are definitely not miracle workers.

@KiloKaze Жыл бұрын

I love the hybrid stuff

@giankarlo4423 10 ай бұрын

Hi! Just wanted advice. I'm very sensitive with swirl marks and scratches. I used to wash my car in the garage myself. But I moved to an apartment with no water supply and hose in the garage giving me only tunnel car wash as an option to clean my car. I know improper ones can scratch, but if I always have a proper layer of wax, will that guarantee that my car won't get swirl marks in the long run? I dry my car properly with microfiber so its just the automatic car wash I'm worried about. Thanks!

@dandezz Жыл бұрын

Panner checks Bob's video from chem X ...he has a cleaner and neutralizer that he uses on big rigs, etc..and the results are pretty impressive.. No agitation, and he wipes like you did with a white paper towel at the end to show its clean

@muzmin9849 Жыл бұрын

I think touchless wash is achievable But probably not cost effective. My first idea is to refoam Bilt hammer when the car is dry or even trying products for road grime/film. 2nd after the first foam go closer with the presser washer but not too close to remove paint. Depends on the pressure and flow rate. Have removed 90% of floor resin with a pressure washer and the rest with cutting compound and rotary.

@jefflartigue9110 Жыл бұрын

I don't miss the Montreal Winter road conditions, and what it does to your Cars\SUVs etc...... but it does bring back some memories. Thanks

@PanTheOrganizer Жыл бұрын

Hi Jeff! Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 890,000 subscribers and we have over 115 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing. How did you discover my channel by the way?

@jefflartigue9110 Жыл бұрын

@@PanTheOrganizer I Like to learn tricks about Car Care, and Now living in the Desert (North East of Phoenix), where rust may not be an issue, but Pain fading, etc.... is. Thanks. You Tube is the source as to where I found you.

@PanTheOrganizer Жыл бұрын

Thanks for the feedback!

@jefflartigue9110 Жыл бұрын

@@PanTheOrganizer Just keep it up. I still have a Brother, and his children living North of Laval, I was raised in Montreal West (The end of Sherbrooke st w. Anyway, GO HABS, hate the Vegas knights I'm going for the Panthers.

@PanTheOrganizer Жыл бұрын

Cool!! I have a feeling Vegas will win though haha. But it would be nice to see a Cinderella story with an 8th seed winning the cup!

@Shayxxx Ай бұрын

Pan I am a fan but this video I have 2 thing that bothered me. both on the paint and both on the wheels you left the chemicals to dry. I'm using bilt hambers product for a year and I found that since they're very powerful you don't need to let them sit too much. 1-2 minutes is enough. see when you leave it too much, the dirt that is being lifted is starting to dry and stick to the paint wheels, so you gotta find the sweet spot and rinse it before it starts drying again. I have fantastic results with this products, even better than showed on your video, sometimes a contact wash is pointless since bilt hamber products do such a good job. cheers mate.

@johnnyhernandez2790 Жыл бұрын

Pan, what am I doing wrong? I tried to do a touchless wash and that didnt work, so I decided to wash my truck in the safest way possible since its band new and I dont want to scratch the clearcoat. I went out and I bought a dozen of Microfiber Chenille Mitts to wash my brand new black truck with my foam cannon. I foamed the entire truck and I let the soap dwell for a little bit and then I used a clean wash mitt for a small section. As soon as I was done I tossed the dirty mitt in a bucket and I used a clean unused mitt on the next section. When I air dried the truck I noticed some small swirl marks on the paint. I dont understand how this happened?? Do you have any idea what I did wrong?

@Weekend_Warrior187 Жыл бұрын

I wonder if that will work great on a semi truck, always wonder what soap they use at the truck washes.

@chadjohnson7544 2 ай бұрын

Awesome video sir. On my personal vehicles i use swift touchless shampoo and work bottom up and after pressure wash at 2000psi. Then apply meguiars wash and wax and results are amazing. That is only on my personal vehicles. But client vehicles i do contact wash. Why my results are great with my touchless wash procedure works so well is because my vehicles are cleaned twice a week.

@PanTheOrganizer 2 ай бұрын

Thanks for sharing. How did you discover my channel by the way Chad? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 985,000 subscribers and we have over 135 million views! I have been detailing for 27 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@chadjohnson7544 2 ай бұрын

@PanTheOrganizer I have been following you since 2020. You provide excellent videos and always keep me on my toes. You are the one who inspired me to step out of the box and explore P&S products and im stuck on beadmaker till this day.

@PanTheOrganizer 2 ай бұрын

Cool! Thanks for the positive feedback man! 👍🏻

@alexk5157 2 ай бұрын

I have tried that swift touch-less my self and I love it

@TurboBuRick 4 ай бұрын

I have a mothy plan at my local soft cloth car wash. i go through 3 to 4 times a week. My car looks great. It does not scratch like most people think. All the nonsense with foam canons and touchless washes are nothing but a waste of time IMO. Specially on the daily grocery getter. That said This is a great video. Someone who is very qualified unlike most of these videos done by people who couldn't tell you the difference between low and high PH.

@PanTheOrganizer 4 ай бұрын

Hehe thanks man! How did you discover my channel by the way? Welcome to my channel. You discovered one of the biggest car detailing channels on KZfaq as we surpassed 960,000 subscribers and we have over 130 million views! I have been detailing for 26 years and I love to share my knowledge and passion with my viewers. You found the right channel to help you learn everything about detailing.

@TurboBuRick 4 ай бұрын

It popped up in my feed. i'm always up for learning. I been in the car business my whole life. I have done it all. hand wash, touchless, soft cloth and even nylon bristle. The nylon bristle car washes from the past is where the whole thing started with scratches. Back in the day when the car wash used nylon bristle brush's and the paint was soft lacquer, the paint surface was easily surface scratched. Now with clear coats and soft cloth, there is no comparison. It does not scratch like people claim. People scratch their own cars setting things on them, driving through the bush and getting snow off of it with a push broom or a shovel . Then they go through the car wash and see the damage once the car is clean and right away point blame.

@salukiconvert Жыл бұрын

Yo Andy!! A touchless wash would be a godsend but mind as well just go the extra step and hand wash to get the best results.

@PanTheOrganizer Жыл бұрын

Exactly

@ahlsn7346 Жыл бұрын

Do you never use cold degreaser? I think that would remove the film. In Sweden we always use cold degreaser during winter, otherwise we don't get rid of the film from salt and other winter crap. I apply cold degreaser first and then after a few minutes I apply alkaline degreaser on top of it and then wash both of after a couple of more minutes.

@zouiclerks Жыл бұрын

As a fellow Quebecer, I appreciate your content !

@PanTheOrganizer Жыл бұрын

@syndendesign Жыл бұрын

Would love to see comparison between King Carthur Snow Foam and Gyeon Snow Foam :)

@173customdetailing9 Жыл бұрын

I'm really surprised to how well they done, the turtle tyre cleaner wow now imagine how good it would be after a brushing, that's pan and Andy 👍👍

@PanTheOrganizer Жыл бұрын

You can see that wheel & tire cleaner in action in this video: kzfaq.info/get/bejne/fpx9lrOHp7PZfXk.html

@CookiesUnleashed Жыл бұрын

Out of curiosity, do you prefer the turtle wax hyperfoam over brake buster? I use both since my M brakes create a lot of dust and I tend to use it when the rims are completely soiled. It does seem like the hyperfoam does a lot more work pre agitation, but after agitation the results do look the same. The hyperfoam also runs out incredibly quick compared to brake buster.

@frankr2921 Жыл бұрын

Yes i too would like to know what you thought of the wheel cleaner

@cristovalderrama1794 Жыл бұрын

Frr yea what’s the best wheel cleaner with lots of break dust

@djortiz616 5 ай бұрын

Great video. Question for you though: have you tested any 2-step touchless washes? It would be nice to see a comparison between this one step soap and a 2-step soap. Mainly because with 2-step soaps, the step 1 is a low pH which helps to breakdown the static bond which makes traffic film stick to your surface. Then you follow-up by foaming the high pH step 2 overtop of the step 1, which neutralizes the step 1 and also breaks the static bond between dirt particles and the surface. In my experience, the 2 step touchless soaps work loads better than single step ones. Full transparency, I do work for an automotive chemical company. I reached out to you via email 2 years ago offering to send a free sample of another one of our products and didn't receive a reply (I'm sure you get a lot of emails, so no worries). But since then, we have released a 2-step touchless wash which has been very well received by the trucking industry and also widely used as a maintenance wash for ceramic coated vehicles. This comment isn't meant to be a plug for our brand, so I'll refrain from mentioning the brand name or product name. If you search your emails from July 2021 for my name, you'll find it. Always love your content. Cheers!

@PanTheOrganizer 5 ай бұрын

Hi DJ! I often use high and low pH steps, like in my ultimate spring maintenance tutorial here: kzfaq.info/get/bejne/pbqReaiQ1Zizcas.htmlsi=HbJ1OtLy_GFGA4MS I explained that well. And yes you're on the right path with your explanations. I also use two step pH pre-wash and wash in my new car prep videos like these: Mercedes S 580: kzfaq.info/get/bejne/jNePp8mU3Njdhn0.htmlsi=whord2_UEFSg28UW Aston Martin Vantage: kzfaq.info/get/bejne/hbGXlJaqv7y4oaM.html Volvo XC60: kzfaq.info/get/bejne/qtx0daWW0869dnU.html Tesla Model Y: kzfaq.info/get/bejne/ndWYntZp3baZfo0.html Porsche 911 Carrera: kzfaq.info/get/bejne/aMmbnMynx6zVo2g.html Audi Q7: kzfaq.info/get/bejne/qp14dqWEu9TNqoE.html I receive thousands of messages and emails daily across all platforms, so it's impossible for me to reply to all as you can imagine. I focus on replying to KZfaq comments every day, which already takes me up to 4 hours. It gets overwhelming, I won't lie, as I have almost 1 million subs, but it allows me to stay connected with my audience. No other big channel replies to all the comments like I do, so I take pride in that. Cheers!

@djortiz616 5 ай бұрын

@@PanTheOrganizer Thanks for the reply! Keep up the great work!!

@luisramirez6159 Жыл бұрын

Buen video , saludos desde Puerto Rico 👍

@PanTheOrganizer Жыл бұрын

Gracias Luis!

@webbilexi6640 Жыл бұрын

As always amazing video. I wish I had a brother like you too, I have so many car detailing questions as a newbie. Your videos are very helpful but there are so many products, tools, ways of detailling that it gets confusing for a first time DIY/Weekend Warrior. I wish I had the opportunity to participe in a live video with newbies, where you show detailing methods / products & tools like you do with your brother. En tout cas, si jamais tu as besoin d'assistants, de participants ou de voitures "cobayes" à Montréal pour tes videos, je suis disponible et je te prêterai les miennes qui n'ont jamais été détaillées encore ;) Merci et continue ton bon travail Pan!

@josephdefreitas56 Жыл бұрын

Go through the extensive archive of videos Pan has produced. I can almost guarantee that he covers any questions you may have in his tutorial videos

@PanTheOrganizer Жыл бұрын

Absolutely! 😁👍🏻👍🏻

@PanTheOrganizer Жыл бұрын

Thank you!

@gassman55 3 ай бұрын

I am interested in PPF and even possibly a ceramic coat on top of that. What are your thoughts on how to keep these treated cars clean

@PanTheOrganizer 3 ай бұрын

See my simple tutorial on how to do a maintenance wash of a ceramic coated vehicle: kzfaq.info/get/bejne/f9d5ipppq9O2iYk.htmlsi=LRcMYvy8Df2t-ol4

@solmanJapan Жыл бұрын

I do a pressure wash, touchless wash, and then a hand wash, and then rinse. It's pretty quick and gives me good results.

@rdeh1678 11 ай бұрын

The best snow foam that actually lifts and clean is bilthamber touchless perhaps the best snowfoam and this is all I use in my detailing business is bilthamber products