Nacon Revolution 5 pro Aim customization

Рет қаралды 6,340

Күн бұрын

Hey everyone this is a first of a series I want to do for customisation tips on different controller. As always please share your solutions in the comments.
00:00 Intro
00:14 Quick comparison to Edge
02:24 Nacon stick output explained
06:46 Nacon software customisation
12:22 Final suggestions & outro
#ps5 #nacon #revolution5pro #procontroller

Пікірлер: 95

@extraskullshots4u315 6 күн бұрын

Hey man tracking is amazing with these settings on both right and left stick. Crazy aiming now and it really locks on target!! I subscribed!!

@sadbadguy 21 күн бұрын

dude i followed all yr instructions and boy...IT FEELS FUCKING AMAZING HOLY MOLY. Big thanks man. yr the GOATTT

@thephototechy 21 күн бұрын

You are most welcome bro, plz share which game you are playing the most with the controller, thanks!

@Rumantay 13 күн бұрын

I needed this video thank you

@milkymilkman 29 күн бұрын

Thanks for your hard work

@thephototechy 22 күн бұрын

Hey bro , you are most welcome!

@983Legend 2 ай бұрын

Hey bro, great video. I'm one of those who suffer from the sticks being too sensitive so I'm going to have to try your alternate suggestion. I just haven't found the time to mess around with these settings so I just resorted to making changes on how my thumbs aim lol

@thephototechy 2 ай бұрын

Hey yes if you find them too sensitive, you can reduce the 1st point output a bit, also I’d say try without the shaft insert as well, so keep it small and reduce the 1st point, which should be at 33 and output.33, so keep the position at 33(top tab) and reduce output to .23 and see how that feels. This’ll make it so that initial 33% movement give 23% output.

@983Legend 2 ай бұрын

@@thephototechy I'd very much prefer is Nacon themselves released a setting that duplicates the sensitivity of a standard Dualsense controller. Making changes in game is much more convenient than unplugging the controller and making changes on PC

@983Legend Ай бұрын

I am the epitome of procrastination.......I'm only adjusting this controller now lmao

@3venthoriz0n 2 ай бұрын

Exceptional as always, btw i recently bought DSEdge but i want to let you know there is a bunch of integrated deadzone, if you want to share some ideas im willing and a pleasure for me to help in this run for the ultimate controller 😊

@thephototechy 2 ай бұрын

Hey definitely bro! I do feel that there is some resistance at centre and the output for every zone is large at .78% so it does well to hide that deadzone. Still very slight movement of my stick can make the numbers jitter on my unit. Nacon on the other hand for sure have a huge 8-9% deadzone unless we enable fps pro mode

@Rumantay 13 күн бұрын

Very in depth

@ahmedebrahimi7128 29 күн бұрын

So if i use these settings and i play wireless mode it wont be same as wired? What if i prefer playing wireless? And btw your settings are the best i have seen so far … have u changed anything?

@torstenb.6715 14 күн бұрын

First of all I want to thank you for this great video and all your energy you put in there. Very appreciate it! What kind of aim response curve you recommend in CoD MW3 with your kind of settings? Dynamic? Linear? Greetz from Germany 👋🏻

@thephototechy 14 күн бұрын

Hey bro you are most welcome! Personally I dynamic, but I feel Hall effect sticks performing better with linear response curve in game.

@sadbadguy 21 күн бұрын

this guy has just earned a sub from me

@simplyrelax8507 Ай бұрын

Hey im thinking of buying this controller because im tired of buying new ps5 controllers because of the stick drift. I use tactical layout which means i slide cancel and go prone by clicking the right stick so they tend to wear out very fast as dualsense is super sensitive compared to ps4 controller. How long have you been using this controller? are there solutions of you get a stick drift to fix it? or do you need to pay another 200$ and get a new one? i would love your opinion as this is the best video i found so far on all youtube! I was thinking about edge but it only has 2 back buttons and i would rather avoid it

@Kdhalo1999 Ай бұрын

Does Point 1 represents the small , initial input? What about the white line inbetween both points? And does input 2 represent the end of the stick input?

@novatradz7922 Ай бұрын

Can you test aim settings for the NACON for apex legends please

@mohammadrexx3006 19 күн бұрын

thx so much❤

@thephototechy 19 күн бұрын

You are most welcome bro!

@cassiedippenaar8267 2 ай бұрын

Love the videos bud can you confirm how Nacon is on PC looking to get the controller but mainly for PC gaming

@thephototechy 2 ай бұрын

Hey man so I haven’t used it on a pc as currently only on consoles. But out of curiosity I did a test with a python script on my laptop, where the screen shows the button register. Seeing the results of the Nacon compared to edge on my laptop running the monitor at 120fps, they are very close but edge definitely is slightly better, but nothing like the PS5. The results I got with Nacon were 6,7,8,8,9,9,9,10 and the same script running with edge I got 6,6,7,7,8,8,9,10. All these were button presses as well so not the stick push, I hope you’ve seen my screen recording tests before, those are frames it took to show the register at 240fps recording.

@imaSoldier187 Ай бұрын

Out of all these controllers you reviewed what is your favorite one you used? I really like this g7se but since the updates recently Its felt a little off I noticed the app bugs out for me sometimes like not saving settings or me having to reset to defaults then my aim would feel right again. I also had to recalibrate a few times cause it felt off not sure why but when I press the triggers in while looking at my resting values it changes them. I noticed that my resting values change every time I calibrate it as well sometimes its not as bad of a drift and other times its bad cause I do play on zero deadzone in apex. I wish I never calibrated it in the first place cause it was amazing day one. I had another one before this though and it had scratches on it and a squeaky back button so I sent it back but that one asked me to calibrate it when I first got it during a update. But the second one I got never had to calibrate it even after firmware updates and all that I have no idea why so that is pretty much why I calibrated this one manually. Anyways sorry for the rant I still like this controller and hope you still enjoy yours!

@thephototechy Ай бұрын

When calibrating the G7 SE, be cautious as manual calibration can alter the center point. Depending on the spring's condition, adjust the center point to minimize drift. Personal preferences vary, but for me, controllers with a zero dead zone option, like the G7 SE and E-Swap X, are ideal. These controllers provide true zero dead zone when needed, unlike others with fixed dead zones. Turtlebeach Stealth could become my ultimate choice if they allow a 0 deadzone option but unfortunately that’s not the case🤦🏽‍♂️

@imaSoldier187 Ай бұрын

@@thephototechy Ah yes, I was actually looking at the E-swap recently and was considering buying it. I'll check that Turtlebeach stealth review out maybe one day it will have that zero deadzone ability. As for the g7se I will try to slow down when calibrating it I think I rush through it maybe. I always heard the manual calibration was better to do but the app one seems to work fine as well. Not sure why the paper manual says do the triggers first then joysticks and the app is reversed maybe it doesn't matter the order. It took me a while to get used to hall effect sticks but I really like this controller. I will set deadzone accordingly if I can't get the values low enough. Have a nice weekend!

@Kdhalo1999 Ай бұрын

Also, how can kontrol freeks affect the use of the nacon?

@Rumantay 13 күн бұрын

What’s that red analog stick you have on the left

@ryantesch5345 13 күн бұрын

It came with to shaft inserts. I’m playing with no insert in I believe… is that small???

@Truegrit79 Ай бұрын

Hi thanks for the this i am using what you said and its good. In mw3 what sen are you on and is your dead zone 0 for both. Thanks again for the great work you do.

@thephototechy Ай бұрын

Hey you are most welcome bro! With this controller I’m using 10-10 and 1.5 ads with the dynamic response curve. Now these are what’s suitable to me with my screen setup. I do use a 2 deadzone option in game so it takes some of the drift away and leave a little bit. Left stick I’m keeping with linear output and use smaller max deadzones in game, personally I haven’t used an insert in the left, as I’m paranoid if something happens to one so I have a spare for my right one 😂, but you can even use a large insert on the left to get a quick response out of that stick.

@Truegrit79 Ай бұрын

Thanks for that you use 120 fov or lower.

@thephototechy Ай бұрын

@@Truegrit79 hey so I’m at times playing on a smaller monitor so use 105 and when playing on a 27” monitor than 117-120 depending on map.

@Truegrit79 Ай бұрын

Hi again, sometimes in mw3 when spriting/running my left after a little bit wont move fast and just walks, its not stamina. Gets me killed alot. Any idea what that could be. Thanks again

@frost2728 22 күн бұрын

Is there a wa to find the same configure as the classic dual sense for the aim config?

@FabioAristizabal Ай бұрын

But if you activate the FPS PRO mode it presents DRIFT in the 2 joystics and only the pointer moves... I don't understand friend :(

@jiridolezal891 Ай бұрын

great video. Finally someone showed how it works. I am new to this driver and need some advice please. I play 90 percent with sniping in COD, I'm an aggressive sniper on quick scope. And it happens to me with this setting that the shift of the right analog is very sensitive (fast), can you please advise me what I should reduce? I'm from the Czech Republic, I can speak English, but not so that I can understand it clearly. Thank you very much

@thephototechy Ай бұрын

Hey if you find the initial movement to be a bit uncontrollable then try the opposite. So reduce the output at value 1 instead of increasing it. Also just try the linear with medium shaft and fps pro mode, I do find it to be pretty good with dynamic and linear in game curves. Also use your own preferred deadzones in the game settings as fps pro mode will completely disable them

@jiridolezal891 20 күн бұрын

Ah, so in Point 1 analog where 45 is, should I go lower to 41, for example?

@thephototechy 20 күн бұрын

@@jiridolezal891 hey yes keep the position to where it is and change the output tab to lower than what it’s set when in linear, this’ll give a slower response initially, so will help if you find it uncontrollable

@jonathaanttv1222 Ай бұрын

I just copy your settings.. can wait to get home a try it, what about left stick does it stays in small or medium shaft ?

@thephototechy Ай бұрын

Hey I keep the max deadzone in game small on left stick, also I’m using a precision ring on the left stick coz it’s something I was doing with stealth ultra for a day, now I’m used to it 🤦🏽‍♂️😂. I personally don’t want to use the shaft insert on left as I’m paranoid if something happens to one I use on the right so I have a spare. Also bro be careful with the stick caps I’ve already destroyed a couple of mine, as they constantly pop out for me whilst playing.

@FabiFabs94 6 күн бұрын

Which PS5 Pro controller would you recommend?

@FabioAristizabal 2 ай бұрын

Hello friend and the right joistick... right? ..What is your setup? Yes, .....but what values please, thank you very much for responding friend... Sorry so many questions

@thephototechy 2 ай бұрын

Absolutely, the right stick aim response is crucial for precision in gaming. Starting with the medium shaft insert and linear output is a solid foundation. However, if you're still feeling some sluggishness, tweaking the settings can make all the difference. Personally, I've found that setting the 1st point at 45 with a 0.70 output, and the 2nd point at 74 for medium shaft, with an output of 1.0, can really enhance responsiveness. Give these settings a shot; hopefully, they'll elevate your gameplay experience just as they have for me!

@armoraron4289 Ай бұрын

Hi, with this nacon settings, what aim response curve type do you use in the game? standard, linear or dynamic?

@thephototechy Ай бұрын

Hey personally dynamic and I leave the slope scale untouched.

@deemon710 Күн бұрын

So I ran into the dead zone and thought it was an inherent property of the Hall modules and didn't want to re-train my fingers to adapt for the deadzone. Even after removing the deadzone of 2 and enabling Sensitivity+ (was it?) it still felt sluggish. So I said 'f*k that sh*t' returned it and got the Edge controller instead.

@theboistix 18 күн бұрын

This seems to feel like the sensitivity is very high this way. The recoil is definitely easier to control but the left to right and over sensitivity is very fast

@thephototechy 18 күн бұрын

Hey then you can try a bit opposite approach and reduce the output number at point 1 a bit. Also use in game deadzones of your preferences, fps pro is true 0 deadzones.

@gamingfever3667 13 күн бұрын

@@thephototechydo u still keep the stick output the same at 37 or do u decrease both output value and the stick value

@GeorgianPranks 2 ай бұрын

Hey man, review Flydigi apex 4 please.

@3venthoriz0n 2 ай бұрын

This pls

@thephototechy 2 ай бұрын

I know bro it’s on my list for sure, someone mentioned I can use it on console and I need to check how that’s possible.

@SlDEQUEST Ай бұрын

Hey mate, quick question. When I use trigger stops in PUBG aiming and shooting is fine but the game won't recognise input when trying to drive. To drive I have to put the triggers back to normal. In the software I put them to half and immediate but still the same. Any work around? Thanks

@thephototechy Ай бұрын

Hey bro I had a similar issue after opening the controller to check the sticks. Try using the Delayed Pro setting instead still at half, It seems like the right trigger isn't reaching 100% when you use the immediate setting. I understand my issue coz I opened the thing so messed with the trigger alignment which in turn messed with the calibration, you shouldn’t be having this issue. If that’s what’s happening I’d say speak to Nacon about it as well.

@SlDEQUEST Ай бұрын

@@thephototechy thanks man I'll try that. Really appreciate it

@julienmltn5465 Ай бұрын

Hey, do you also use a shaft for the left joystick ?

@thephototechy Ай бұрын

Personally I’m not but you can if you wanted to, I just reduce the max deadzone n game to get a quicker response on the left stick

@FabioAristizabal Ай бұрын

Is it the same setup for the left stick? Thank you so much

@thephototechy Ай бұрын

Hey I just leave the left as linear coz I use in game max deadzones to make the active area smaller. You could use the same for left stick as well and it’ll be more responsive then standard.

@BA3YDADDY 2 ай бұрын

I would love a review of PS5 HYPR and AIM PS5 controller using the Hall effect sticks 🙌🏻 Edge is 💯 King and the Nacon and Razer is overpriced 🚮

@thephototechy 2 ай бұрын

I know bro I want to try those as well, but the build time scares me a bit. I might do the Aim one actually intead of HYPR, as I've seen some realy bad comments about the HYPR ones.

@BA3YDADDY Ай бұрын

@@thephototechyAim is the more “Secure” buy 💯

@HelveticaBold1 2 ай бұрын

Nerdy question, what usb c cable are you using?

@thephototechy 2 ай бұрын

Hey bro I had to use the Nacon cable that came with the revolution 5, as the port on the controller is too small like G7se🤦🏽‍♂️

@Eversgarden 2 ай бұрын

Gamesir nexus got another update, do you know what changed

@thephototechy 2 ай бұрын

Hey I did it on the PC going to check it on xbox later to see whats changed. For pc looked exactly the same to me unless I missed something, but there is no new firmware for the contoller in this version which gives me hope that 1000 should still be ok on xbox.

@B24Gaming 2 ай бұрын

I'm gonna pic up one of this controller is it possible to put mouse click triggers on this

@thephototechy 2 ай бұрын

Ah bro this is one intricate controller, I opened it enough to check which modules they were using, trigger assembly with hall sensor is very sensitive and I've actually knocked one out of calibration slightly. I'm sure with serious skill someone will be able to do it but I havent seen anything done like that so far.

@B24Gaming 2 ай бұрын

Because the trigger assembly on the rev 3 is wicked what I have observed Ithaca that controller if you use alc settings in apex and drop the dead zone ine game the stick will not drift as soon as you connect a playstation controller to the same setting you gonna see some drift although both controllers don't have any drift whatsoever so from looking at your videos on the rev 5 about zeroing help me to understand what was really happening you should look into it

@ZeroGamesNL 2 күн бұрын

Hey i cant find a solution to my problem. I bought one today but the aim assist trows me off bcs it slows down so much and is almost seems like my sens keeps switching mid game when apponents are around. Already tired of it

@thephototechy 2 күн бұрын

Hey have you set it up with the app or using the classic mode?

@ZeroGamesNL 20 сағат бұрын

@@thephototechy thx for the reply i fixed it and now i like it. Me right stick has a bit of stickdrift to the left but its managable

@Troynex Ай бұрын

Which Xbox Controller is Like the dualsense Edge and PlayStation sticks ?

@thephototechy Ай бұрын

Hey for aiming algorithm to be like the PlayStation 128 zones, the only one capable is G7 with Xbox stick tops. The G7 is using alps like the dualsense and with Xbox stick tops installed and calibrated will bring the zones very close to dualsense. I was thinking of making a video on this as well.

@Troynex Ай бұрын

@@thephototechy Thank you. I Hope so much that Xbox will announce a 1000hz Controller soon …

@braxtonbrown6067 Ай бұрын

any updates on the game sir g7 se? 1000hz is still buggy

@thephototechy Ай бұрын

Hey I’ve been using the 8bit ultimate for it’s review, which should be out tomorrow. Last time I played with the G7se was about a week ago and mine has been working fine, even with that recent update to nexus which didn’t have a firmware update for controller. What bugs have you experienced? Is it the stick staying stick out when centred?

@mraproko Ай бұрын

Do i need to adjust these settings on both right and left sticks?

@thephototechy Ай бұрын

Hey bro left stick I’ve kept as normal linear, as I use in game max deadzone settings to get a quick response. If you like you can even use the large shaft insert on the left stick to get a quicker response, if the game doesn’t allow for such settings.

@mraproko Ай бұрын

@@thephototechy thank you very much for this video, I have had mine for months but never really got a hold of the settings

@mraproko Ай бұрын

@@thephototechy how to select my already customised profile when playing on ps5 any tip?

@thephototechy Ай бұрын

@@mraproko so there are 4 profiles on board and they have the led next to trackpad showing which one you are in. You can even change the colour of the ring light around right stick to know which one you are using. To toggle through them you press the profile button at the back.

@Rumantay 13 күн бұрын

The short one

@iBlueClovr 22 күн бұрын

How did you get a kontrolfreek on?

@thephototechy 22 күн бұрын

The PS5 ones fit after some effort. Also you can try and gently extend the plastic feet of the kontrolfreeks to accommodate the larger diameter, just don’t do harshly as it could snap.

@austinnebu877 6 күн бұрын

Is there anyway to fix this without a pc ?

@thephototechy 6 күн бұрын

Hey bro, unfortunately not but hopefully the promised app will be out soon.

@jatochgaatjeniksaan3307 Ай бұрын

Where is the android app

@thephototechy Ай бұрын

I’m waiting for the same bro, crazy it’s not out still 🤦🏽‍♂️

@jatochgaatjeniksaan3307 Ай бұрын

@@thephototechy tried to register product and its not working. How do you make a great controller while being inept at basic website interface? Crazy lol.