Alex on Tour deel 2 - Jansen Heeten aan het mais hakselen met hun John Deere 8400i (2018)

Рет қаралды 778,787

nagd2010

5 жыл бұрын

Loonbedrijf Jansen Heeten aan het mais hakselen met hun John Deere 8400i en Alex aan het stuur.
In deze video volgen we de hakselploeg van begin tot eind bij het hakselen van een veld mais.
Naast de John Deere 8400i rijden 5 trekkers, de eerste die de hakselaar de mais in volgt is een John Deere 6190R met Schuitemaker Siwa 720 silagewagen.
Daarna zien we 2 New Holland T7040 en 2 Fendt 930 Vario arriveren, beide New Holland rijden met een Schuitemaker Rapide 660 en de Fendt trekkers met Schuitemaker Siwa 720 wagens.
Nadat de mais eraf is wordt de Kemper 360 maisbek weer van transportbescherming voorzien en vervolgt Alex zijn tour.
Contractor Jansen Heeten busy chopping maize with their John Deere 8400i with Alex at the wheel.
In this video we follow the chopping crew from start to finish harvesting a field of maize.
Driving alongside the John Deere 8400i forage harvester are 5 tractors, the first to follow the chopper into the maize is a John Deere 6190R with a Schuitemaker Siwa 720 silage trailer.
We then see 2 New Holland T7040 and 2 Fendt 930 Vario arriving, both New Holland have a Schuitemaker Rapide 660 behind them and the Fendt tractors are using Schuitemaker Siwa 720 trailers.
When all the maize has been cut, the Kemper 360 header is fitted with the transport guard again, and Alex continues his tour.
13 September 2018
© copyright by NAGD2010. All rights reserved. The video's and/or fragments of it, may NOT be downloaded, edited, altered, or re-uploaded without my permission.

Пікірлер: 34

@Agriculturespotter 5 жыл бұрын

Prachtig om te zien Niels, altijd gaaf als ze net het land inrijden!

@nagd2010 5 жыл бұрын

Dankje Jan. Vind ik zelf ook altijd het mooiste, als ze net een veld inrijden, kanten losmaken enz.

@mijnJD5830 5 жыл бұрын

mijn allerbeste wensen voor u en uw naasten en dat we nog veel mooi beeldmateriaal van u mogen krijgen zoals deze video weer en voor alle landbouwers en loonwerkers een normaal vruchtbaar jaar

@nagd2010 5 жыл бұрын

Dank u. En uiteraard u ook een goed nieuwjaar gewenst.

@AgricultureINDIA-91 5 жыл бұрын

Magnificent video! An excellent work! Nice deere! Thanks for sharing! Have a good one!

@nagd2010 5 жыл бұрын

Thank you.

@cascaseih412 5 жыл бұрын

Mooie video niels heb je weer mooi gedaan.

@nagd2010 5 жыл бұрын

Dankje Cas.

@JDrostAgricultureVideoNL 5 жыл бұрын

Mooie video Niels

@nagd2010 5 жыл бұрын

Dankje Johan.

@CrossfellRailwayVideos 5 жыл бұрын

Very nice - love it!

@nagd2010 5 жыл бұрын

Thank you Alan.

@DutchAgriculture 5 жыл бұрын

Mooi filmpje Niels! Mooie machines 👌🏻

@nagd2010 5 жыл бұрын

Dankje Marijn.

@williamclaxton6530 Жыл бұрын

Sounds like the cows are getting hungry

@gaetanbellavia8702 4 жыл бұрын

De toute beauté sublime et grandiose

@WilliamB161 5 жыл бұрын

Nice video happy new year

@nagd2010 5 жыл бұрын

Thanks.

@AgrarShotsEastGermany 5 жыл бұрын

Top Video 👍🏻

@nagd2010 5 жыл бұрын

Thanks.

@paulbailey162 4 жыл бұрын

Nice machine 👍

@nagd2010 4 жыл бұрын

It sure is :)

@vipulvasava4026 4 жыл бұрын

I like video my friend

@laszlovigh2513 5 жыл бұрын

👍👍🚜🚜🚜

@alexwhitfield8566 5 жыл бұрын

does the driver of the forager know he doesnt need to switch it on and off all the time when stopping? so much wear on the clutch that engages

@nagd2010 5 жыл бұрын

It's not the driver that does that, the machine does that by itself. As soon as you lift the header, few seconds later the motor revs will decrease (the chopping assembly is not switched off by the way, only engine revs drop). This is to save fuel and to comply to all those modern emision regulations. You cán override the system, but by default the machine does it like this. Other brands tend to do it as well now with the newer models. Later models of the New Holland FR for example also have this system, as soon as the header is lifted, the engine revs drop, as soon as you drop the header, it goes back up.

@alexwhitfield8566 5 жыл бұрын

@@nagd2010 ohh i didnt know that john deere did that i thought they all worked in the same sort of way, thank you

@nagd2010 5 жыл бұрын

Late models of the John Deere 7000 forage harvesters also had it (think as an option), with the 8000 series it comes as standard. It does sound a bit weird at first, but I've noticed more new model forage harvesters of different brands do it as well.