💲💲💲💲 Name Brand or 💲 Generic Bobbin Case? Let's find out!

Рет қаралды 3,968

2 жыл бұрын

I bought a $40 Janome bobbin case and a $10 Generic replacement. Is it a suitable replacement? Does the generic case need an adjustment to work correctly? (Spoiler alert) Yes, it does.
Support the channel, be a Patron: / sewingmachinerepairguy
Learn more about me on my website www.sewingmachinerepairguy.com
Also I'm on facebook / sewingmachinerepairguy
Check out my Etsy store! www.etsy.com/shop/SewingMachR...
Some online resources for Sewing Machine Repair
s-ish.com/
www.manualslib.com/
store.tandtrepair.com/
www.ebay.com/
Here are some of the products I use to repair sewing machines. These are affiliate links, they don't cost you any extra. They provide me a small commission if you purchase these products via this link. This helps me continue to provide videos for your enjoyment. As an Amazon Associate I earn from qualifying purchases.
Tri-Flow Sewing Machine Oil (my personal favorite) amzn.to/2XWMeSR
Tri-Flow Grease (my favorite grease) amzn.to/2Y1e28r
Bottle brushes amzn.to/3gVcohE
Nylon brushes amzn.to/3gQGenh
Makita vacuum amzn.to/2Xv2hrZ
Makita impact driver amzn.to/36WJwAI
Wera screwdrivers amzn.to/370qpFS
Starrett S423Z Steel scale set amzn.to/2Xy4pzn
Krud kutter amzn.to/2Bz7rLf
Denatured Alcohol amzn.to/2z0kSTk
Towa tension tester amzn.to/2U6Uq1O
Pliers, Parallel Flat Nose Smooth Jaw amzn.to/3gPN4JN
Magnetic Tray amzn.to/3oyVSaJ
Scripture quotations are from the ESV® Bible (The Holy Bible, English Standard Version®), copyright © 2001 by Crossway, a publishing ministry of Good News Publishers. Used by permission. All rights reserved. May not copy or download more than 500 consecutive verses of the ESV Bible or more than one half of any book of the ESV Bible.

Пікірлер: 24

@rdfjfgjyfdhfghy67456 2 жыл бұрын

May goodness, the content we need and done so wonderfully too!

@johnkowalchuk1028 2 жыл бұрын

It would have been nice to see the machine sewing with either or each of the bobbin cases.

@cocasio7190 2 жыл бұрын

Hello! Thanks for the video. I don't have this machine, but reminded me to compare items when they aren't original parts first. Blessings

@ronschneider1870 2 жыл бұрын

It's funny that you aired this at this time. Yesterday I had 2 singer merrit 4552 bobbin tensioners that I had bought for my sewing machine and they both were generic to replace my old bobbin tensioner. First the new ones were way too tight and I adjusted those. Both the old and new tensioners looked the same. And they did not work. The thread from the hook wouldn't go over the top of the tensioners. So I agsin compared and noticed that the new ones were a hair too high. So I put the old one back in and the machine worked just fine. Now I still need to get a new bobbin tensioner.

@yolandadavila Жыл бұрын

Thanks a lot for the video, my Janome MC6600 gives me a lot of issues with the bobbin, for now this one worked. I buy my bobbins for Aliexpress as the ones her are so expensive like you mention. Now I now what to check for before I place them on my machine. I love the trivia question, God bless!

@kathconstance4684 2 жыл бұрын

Great content. Please do a video on generic presser feet vs branded :)

@TwixyNo 2 жыл бұрын

Thank you for this. I find it truly fascinating.

@conqueringmountscrapmorewi2509 2 жыл бұрын

Very interesting! Thank you for this video!

@bernadettedesouza4953 2 жыл бұрын

Thank you so much. God bless you.

@carlarybicki9227 2 жыл бұрын

How about how to properly wind a bobbin?

@loominaria721 2 жыл бұрын

So I've seen you do a lot of maintenance on the jw8100 is that a big sign that it won't last as long and has more issues than a hd1000

@semco72057 2 жыл бұрын

I have a Singer model 2277 machine that is new and I have not been able to stitch the sample material with it yet and think it is the bobbin that is the problem.

@yolysab3899 4 ай бұрын

How you call the chamber where you put this type bobbing case?

@gkarreq2007 2 жыл бұрын

I LOVE these type of videos. THANK YOU! I have a singer 9960 and the spring that allows the bobbin to move back that you pointed out at 6:24 in the video that isn't working right, it's allowing the bobbin casing to move way under it and I can only sew on the lowest setting due to that spring. I called 3 different sewing repair places near me here in Middle TN (within a 100 mile radius) and every one of those shops are full and behind by 6 to 8 months. Two were over 6 months before they'd even begin to work on mine, and the one was 8 mouths behind. They have so many machines to repair and only one person that is certified to fix the machines. Every shop only had 1 person who's certified working for that shop. The ironic thing is that Singer sewing companies main business plant is less than 20miles from me but they don't do any repairs at all. Any tips on what I can do?

@Ingrid-fh3qu 2 жыл бұрын

Get rid of your Singer Machine 😉 That’s what I am about to do with mine.

@gkarreq2007 2 жыл бұрын

@@Ingrid-fh3qu If I could afford another one then I'd probably do just that but sadly I can't afford another sewing machine so I gotta try to use what I got. :)

@Ingrid-fh3qu 2 жыл бұрын

@@gkarreq2007 same situation here.

@eideticgoone7035 Жыл бұрын

The purpose of that spring is to allow a gap for the bobbin thread to pass and at the same time prevent a rattling noise when the gap rapidly opens and closes. Your spring may have been twisted a bit and rides too high allowing the bobbin case to pass under it at high speeds. You can simply bend the spring back into shape. At the same time, adjust the gap. About 2-3mm is about right I think. It might be easier to remove the spring before bending it. There is a mounting screw above the spring on the 9960 which allows replacement, not adjustment. If you need to replace the spring I found the part # 416396801 Bobbin Holder Stopper Assy. It is not expensive. On my 9966 the gap was initially about 4 or 5 mm. On my Brother 6000i it was about half that amount. I just bent the spring on my 9960 to close this gap some, and it sews fine at high speeds. I see you made this comment 1 year ago. Perhaps you have already serviced the machine, but if not try this fix.