Hi Michael thanks for posting these videos, I am enjoying my MAX2 40ah last couple months now, and I'm impressed with the adjustability and excellent build quality.. I'd like to know if you have learned approximately how many miles or Kilometers before tires and brake pads typically need replacing, same for typical lifespan of Motors and controllers too. Also if you've tried the PMT tires - would be good to see what the factory thinks of them in comparison to stock tires...thanks in advance and keep up the good engineering!
@Enginerr823 күн бұрын
Hey I just received my Nami Klima. After setting it up I went to ride it but it’s going so slow. In X mode it only goes 15mph and In E mode is only goes 5pm. I checked the display screen and settings to the manual and it all looks good . Battery is 97%. What is the problem ? Do I have to unplug the speed limiter wires ?
@thecam0073 Жыл бұрын
Michael, I really appreciate you making these videos. I am down to one Electric Scooter and that is the Nami Viper. Thanks!
@painkillz27323 ай бұрын
is there a way to display the bettery voltage on the main screen?
@lapchik014 ай бұрын
plz question about p11: my info say: x-100...one my friend say 100amp...and one my friend say 100 percent). but my old nami burn-e only x-60. it is coz controllers are 2x30amp!? thx
@mlim47422 ай бұрын
Hi I have a problem with P3 it mark Off and I can’t change it .please help me .
@klipschornyАй бұрын
Same here
@15492mv4 күн бұрын
When are you going to have an app like most other scooter?
@Flinttigger5 ай бұрын
Do the 28ah controllers set to 50 or 40?
@harrynilson3074 Жыл бұрын
can u make a tutorial like this like how voro do it?
@hjtm432 Жыл бұрын
Mine only goes to p13, also can"t change the p7 setting. Any suggestions? I have the burn e 28Ah version.
@willjctm17637 күн бұрын
Thank you
@matthewsouza111521 күн бұрын
My P3 settings says off i have tried but it will will not change from off please advise
@QuangdTran-mv8rp Жыл бұрын
Hi Michael why my Nami max 2 flashing 80,and it doesn't go anywhere,may because I unplug the two or one wires
@lazydave1140 Жыл бұрын
Can you please make an optional bolt on seat for people like me who struggle to stand up for long periods of time. Thanks
@almusic42769 ай бұрын
You lazy man 😂
@Mcsteamykettleface Жыл бұрын
Is turning on turbo by passing speed restrictor without having to disconnect wires?
@4partmedia4 ай бұрын
No you have to disconnect the speed limiter wires.
@YouXube_Latam27 күн бұрын
2:46 What do you mean by 2 circles?
@myplaxismodelisbetterthanyours7 ай бұрын
When you have the turbo icon showing (not ON) is that doing anything? Or do you need to activate turbo mode to ON for any speed benefit?
@michaelsha27817 ай бұрын
it means the turbo funcion is ready to be active, it does not change anything
@myplaxismodelisbetterthanyours7 ай бұрын
@@michaelsha2781 thank you. Just got a Burn-e 2 Max, it's an amazing machine 🙏
@cocoabiscuits6 ай бұрын
@@myplaxismodelisbetterthanyours same! my P3 setting is stuck off. Won't change to anything which is strange. Otherwise x mode is insane. I wasn't ready lol
@demigodtv1742 Жыл бұрын
Does klima has same dashboard settings? With p1.1?
@michaelsha2781 Жыл бұрын
Yes
@remychen372 Жыл бұрын
When I change p7 to 1 then show pass icon on display but when I riding the speed show zero
@JulianRides Жыл бұрын
How do I remove the brake active icon on the display? When I turn on my scooter when I squeeze the throttle the scooter won't move ?
@makar98 Жыл бұрын
I know this was 2 months ago but in case anyone else has the same issue there's a decent video on kzfaq.info/get/bejne/mM-bpZBnlt6WeYU.html. Jiggling the brake wire caused it to go off for me but I'm still trying to figure out why my scooter won't accelerate at all after riding 4 km
@xbaroka Жыл бұрын
the motor brake use battery ?
@michaelsha2781 Жыл бұрын
it actually charge the battery a little
@Koala_Kane3 күн бұрын
Anyone know how to reset the mile count for each trip/ or per charge? As i want to track my mileage per day?
@michaelsha2781Күн бұрын
pressing +- together
@pfflyers110 ай бұрын
Anyone know how to reset the trip odometer?
@russiasniper979 ай бұрын
Hold - and + at the same time
@QuangdTran-mv8rp Жыл бұрын
Why my Nami max 2 .flashing 80
@ernestsanders717011 ай бұрын
I had a nami and the charger turns red for about 2-3 seconds then turns back green can you help me with a solution
@jasonwu27585 ай бұрын
Not personal experience but I saw a YT video that said plug charger into scooter 1st and then plug it into power outlet after. Just got Klima Max today do can't confirm it but been watching videos on these Nami scooters and that was one I came across. GLHF
@ernestsanders71705 ай бұрын
@@jasonwu2758 thanks I fixed the issue, when this happens you have to make sure you unplugged the display so the charger and display can both be reset. The issues is the control panel doesn't know how much power the scooter has and turns off as a safety.
@kuokelis Жыл бұрын
Can you switch on subtitles on your videos? Thanks.
@michaelsha2781 Жыл бұрын
i will try, not sure how to do it yet
@bstarsalunke Жыл бұрын
Sir can you help me plz can u send me motor dimensions of namiburn sir please help me I am from India
@DonnyBenfield Жыл бұрын
Thank you for this video. The instruction book isn’t that great.
@cocoabiscuits6 ай бұрын
P3 won't let me change from "OFF"
@1Petergreat5 ай бұрын
I have the same problem p3 can't change to on and can't change the settings for the front motor p1.2 and P1.4.
@cocoabiscuits5 ай бұрын
@@1Petergreat I'm speculating but I wonder if it has to do with the NFC card reader disabling? That's the only thing I'm guessing as to why. I was able to change it to off but now can't do anything to it since.
@1Petergreat5 ай бұрын
Apparently you have to go to basic settings p15 and change it from 0 to 1.Then in advance settings you can adjust 1.2and 1.4 for the front motor according to Michael Sha.
@conr21417 ай бұрын
Why not just have descriptive labels for the settings in the menu, rather than "p1", "p2" etc?
@irish2u38911 ай бұрын
Seems a bit difficult, Jezzzzz "KEEP it Simple Stupid" No disrespect Statement comes from a NA group but cuts threw the BS
@darkozivko7683 Жыл бұрын
I have milion ideas how to improve my Nami scooter for Dublin conditions but still he waiting me in the shop...