Napoleon Prestige 500 BBQ Grill Assembly

Рет қаралды 18,190

Жыл бұрын

This is a companion video for assembly of the Napoleon Prestige 500 BBQ/Grill. Super easy to assemble. Need 2 people to put the top onto the base.

Пікірлер: 36

@user-fe4do1ri7m 19 күн бұрын

Thank you. The instructions were images only and no words. Without this video, it would have been much harder.

@jefferyglass5269 3 ай бұрын

Thank for this video. Mines did not include instructions. Even with the PDF from online, it would have been a struggle without this video!!

@watcher3965 Ай бұрын

Thanks for a great video and your work producing it! I really appreciated your help and this type of sharing is the best thing about KZfaq. As others have mentioned, there were some extra screws included in the box.

@MatijaGrcic 4 ай бұрын

Great video, didn't even looked at the manual, 1hr for full assembly.

@jeffspicoli6088 5 ай бұрын

Great video! Thanks for sharing!

@axxamenni5501 Ай бұрын

Nice job! Better than the official Napoleon videos.

@jayamidi 10 ай бұрын

Thank you! This outstanding video is exactly what I needed (esp since the video by the maker is virtually useless!) Your experience with such things is obvious, and your identification of those points that might confuse ppl - and their remedies - are so appreciated. Plus - nice camera work.

@robsgaragewoodworkin 10 ай бұрын

Thanks! It’s always nice to hear such positive feedback. Enjoy the new BBQ. It’s really great! Cheers! Rob

@rlebz 2 ай бұрын

Thank you. This was incredibly helpful!

@quentinbroome2778 2 ай бұрын

Just putting mine together now and have a quick comment. Don't quit your day job! Lol! Just teasing fella, see you at work next week!

@robsgaragewoodworkin 2 ай бұрын

Dude it’s almost midnight. You cramin it together for a midnight snack? I’d come over but I’ve been into the sauce. Enjoy your new toy! See you sooner than either of us want… 🍻

@Constantlll 4 ай бұрын

Thank you !

@avi614614 11 ай бұрын

Thanks a mil im putting mine together now

@robsgaragewoodworkin 11 ай бұрын

Awesome! Best of luck! What are you going to cook first?

@kellyfagan3823 3 ай бұрын

I am assembling mine right now following your video. I am trying to slide in that slanted drip pan but i do not have a ledge on either side?? Im at a loss on that. Great video - really helped alot thank u

@JohnDoe-li8fp 5 ай бұрын

15.38 I've built a dozen of these units and only one of them had those types of screws for the sides. The rest, flat-point screws. It would be nice to have these screws for future units.

@mikemondelli741 3 ай бұрын

How are you getting the flat point screws in? I don’t have self tapping either and can’t get the remaining screws in for the sizzle zone shelf.

@JohnDoe-li8fp 2 ай бұрын

@@mikemondelli741 So I suffered from a slight bone-head moment. One of the side burners had screws that were taped to the very bottom that appear to be the screws that are self-tapping. Otherwise, I had to use an impact driver to get the flat ones in. It's a bit confusing considering nothing in the literature explains where to find the correct screws. I still don't understand why the flat ones are given in the first place. I could be missing a step, but the directions on the assembly of these grills are lackluster at best.

@countbackfrom10 Жыл бұрын

My grill came with 5 longer silver screws with a hex head and a Phillips screwdriver head, any idea what those are for? They came in a separate pack with the gas line/ wiring harness plastic holder. Can’t see where the directions ever call for them.

@robsgaragewoodworkin Жыл бұрын

Sounds like they grabbed an extra pack from another product. Maybe they’ll come in handy one day 😂

@chrissurovic3543 7 ай бұрын

did your grill come with the stainless steel side burner grate or did you buy that seperate ? mine came with a cast iron one. thanks

@robsgaragewoodworkin 7 ай бұрын

I upgraded to stainless. It came with the cast iron one

@laydeedy53 2 ай бұрын

Do u have a video on stuck knobs

@robsgaragewoodworkin 2 ай бұрын

Sorry, I do not. Try push and twist and pull and twist. Both directions. WD 40, perhaps dynamite 🧨 Good luck 🤞

@MrMolsons 2 ай бұрын

What screws did you use to attach the burner to the grill? The silver ones dont seem to fit?

@robsgaragewoodworkin 2 ай бұрын

Mine was already installed from the factory

@daveschenone7355 14 күн бұрын

I have the same issue...Screws seem to be too big. Did you resolve this? Also, the holes don't seem to have threads to even screw them in. If you had to purchase new screws, what did you use?

@robsgaragewoodworkin 14 күн бұрын

@@daveschenone7355 The burner was already attached to the fire box. It came pre assembled

@MrMolsons 14 күн бұрын

@@daveschenone7355 I figured it out. You have to mess around with the screws to find the right fit. The one they tell you to use in the manual are not the right ones.

@chukcanuk Ай бұрын

My Prestige 500 came assembled and while moving it a year later, the right side door fell off. When I reinserted it, the pegs fit but it was much lower. The door does not close evenly even with the spacer and holes on the bottom. Almost like it needs a water to raise it up. Adjusting the nut was of little help.

@robsgaragewoodworkin Ай бұрын

There is a washer spacer that the door sits in. Is it possible that is missing?

@chukcanuk Ай бұрын

If you are referring to to the black washer spacer sitting in the bottom hole , no, it is there. To my eye the parts are the same on either side. The only thing that occurs to me is that I did not reassemble on a completely flat surface. Our patio stones are uneven. An since we are about to do a Reno on the patio and my garage has no working space, I won’t know for a while. I’m going to take photos and go to the local retailer who assembled it.

@chukcanuk Ай бұрын

@@robsgaragewoodworkin I think I have to reinstall the door on a level surface. That is what the dealer recommended. As I was moseying about the dealer I saw one with assembled with a similar issue. Glad to know I am not only one. The BBQ works fine though.

@chukcanuk 17 күн бұрын

@@robsgaragewoodworkin time passed and after putting the bbq in my garage (on a flat concrete floor) during the patio installation, the doors leveled themselves and now open properly.