Road salt have toasted my fenders and your video have given me inspiration to replacing them this summer. Thanks a lot from Norway.

Just wanna say thank you for these helpful videos. I've saved $$$$$ watching them and working on my Audi in my driveway... THANKS!!!!!!!

Great video, you’re very clear and easy to follow, thanks for sharing this. I like your leaf trick too! 👍

Great video, need to do this to mine just have to find the parts car. Can't believe how calm and chill you are in those tight spaces. Obviously a ton of experience. Thanks again man.

About to do this exact project. Thanks for the thorough tutorial man!

Don't want to see you hurt, throw you a tire under that thing or a jackstand. Thanks for all the content.

The leaf trick is nice in a pinch! I usually use paper from a receipt.

Fairly straightforward,I know now what the job is worth!

I was cringing the entire time. Jacks aren't designed to hold weight over a period of time, only to lift. That's what jack stands are for. Other than that, super helpful. Thanks for posting.

Thank you for all you do for us brother 🤛

Do you buy pre painted parts? Have a site you buy from? Thanks!

Awesome video, man! Really helpful! :)

That was very helpful to get the right fender off. Thanks., but when you get to the left fender the windshield washer reservoir is in the fender blocking access to those last 2 screws in the door jamb. Any hints on how to get that reservoir out of there. I already removed the two visible screws?

I just did the drivers side More of a pain as you have to remove the washer reservoir

Hey nap town happy 4th. I was always curious as to why these models have to be jacked up so high in the air before the tires actually come off the ground. Is it a failing part.

Your a savage love your videos keep it up

If you put a performance clutch on a 6 speed manual trans in a 2011 Audi A4 will this allow the trans to handle more torque?

Any thoughts on getting that windshield washer reservoir removed on the driver side

Best🎉

Do a vid on replacing heater/airconditiong flap motor mine center console ones are bad and I wanna see one done before I do it.

Hello naptown tuner. Live your channel. I have a question. Is the 4.2 litre V8 Volkswagen from a Toureg a good engine? Thanks for all you videos

Always clean ALL the dirt and debris from the body working areas..dirt can easily cause bolt or screw cross threading and or stripping out..where there was factory weather caulking.. clean that away and apply fresh material.. sealant was applied there for a reason the QC saw in testing.. Black plastic Push pin clips are what is used in much of the plastic fender and splash guard areas in Nipponese mfg autos, it breaks away under less stress than the part it holds so it helps prevent rips and tears in plastic panels and similar parts as well..

Great video

Where you get those clips for the fender line the first one you where putting

What are all the bolt and screws size needed to remove?

Hi this is Erin Cascade Maryland I like to see how you change a fuel pump B7 A4 Audi 2.0

Great video man, At the end of the video where you fixed the gap, Did you you just tighten the top screws? How did you do it?

where did you order the fender at, and about how much was it?

Another good vid. Could you give the specs on those Koni shocks?

Hey brother, I have been having some weird rough starts. Misfires occurring for the first 5 seconds of warm up. Are my coil packs and plugs bad?

Yes KONI shocks 👍🏼

2012 not in the title, different process or just typo?

What about the 2 T30's Behind the Fender Seal and the Plastic Pop Rivets That like Ya Know,,Actualy PUT the Fender Seal Back in Place?? Did this tonighy on My S5 on Drivers Side With the Water Bottle. What a Bitch to put it Back 100% Factory!! New Fender I Had to Rivet All the Mounts In that I had to Drill Out of the Old Fender. If it Wasnt A Perfect Condition 2012 S5 "Special Edition" I Would Push this Damn Car into a Lake🤟

Can you do a video on how to buy tires? I’ve heard the new Michelin AS4 are really good, but there like $1k. How do you buy tires?

Will B9 be similar to this?

Any short blocks for sale ?? 2011 audi A5 2.0t???🧐

Hey man is the belly pan still available?

Is that a red s4 in the back ?

Hey a little off topic but does anyone know how much hp a 2011 A4 transmission can reliably handle?

Will this work for an Audi A5?

Just needed to remove the filler neck, then it came right out.

U still have the parts car

You from Annapolis?

Bumper emblem