Man, I'm so glad these videos are back.

I remember watching ur 2010 videos touring your game room. I was 8. Now I’m 18. Time flies

It fulls my heart with so much joy to know that the videos are back keep up the great work John! 👍🏻

John, take a trip over to Jay’s basement. Let’s see his cabaret collection!

GOD it's been a minute!. Been busy fixing arcade games at my work in AZ. Also a pinsetter mechanic and I love your videos. Glad to see another video from you, John!

I miss these repair videos so much.... So glad youre back!

Glad you are back, John! Can we get a video tour of the basement? So much has changed! Like, where's Journey? You worked so hard on it. It's sad to not see it there. Love to you and your family.

So glad you're back!! Awesome vid 🤟 love that NBA Fastbreak! Its FANTASTIC!!

Very happy John's back! I'm finding myself pausing the videos just to make them longer.

Glad to see John working on the arcades with Jay, open the door to the garage 🤣 (so iconic) nba pin get some love , checking that juicy pork , perfection! 😂

The repair vids are back - wonderful! 👍👍👍

So so glad you're back, John. I've really missed your videos.

Jay is a great cohost, love that you guys are back. I blew the same fuse in my fastbreak, couldnt figure out how. Also the previous owner subbed in some Home Depot fuse that wasnt quite up to spec. ps Look into LED OCD for your Fastbreak! If only to smooth the GI dimming, love mine.

Glad your back! Thanks for another great video!

dude its sooo good to see you again john missed ya bud...great video as always!!

Can't wait to see the shop work on the NBA fastbreak, I like how unique that pin is

Glad to see you back John!

Welcome back! You put out quality content

Keep the videos coming. I know your probably bored of games in the garage, but enjoy them cause that is a amazing variety.

John you are the man. Thanks again for -ANOTHER- great video. Famine for a while but now it's time to feassssttttt!

Nice house call from Dr. Jay. I bet he'll get those arcades open even if he has turn them into a casino!

The cabinet and pinball collection is awesomee man 🔥😍

John - Great to see you again man!Keep it up

'Jays Arcade Game Reviews & Tech' in this epirsode with John and TIm.

Glad you are back!

LEDs in pins are cool but if I get old pin I would keep ald types bulbs.Gives you that amber analogue 80s lighting look and feel from led but less are still awesome.

Woot, Jay back at it again

John. Get a powerful tool magnetizer/demagnetizer. They are cheap and it will be the best money you ever spent. Keep one in each toolbox. Second. More and more I now see the value and needs of 3d printers. You don't need an expensive one but one that can be setup quick and ready to go out of the box with a little learning curve. I am pretty sure there's likely a community that 3d prints all sorts of things you cannot find anymore. Think about just this video alone. 3dprint a corner brace you can use to screw and secure both boards together tighter for Major Havok or 3dprint plastic standoffs and and odd parts you cannot get anymore for these older machines. New motherboard brackets. Someone's probably made these already in file for you can just upload to a printer and test print them. Get a decent starter 3dprinter that won't break the bank. I am sure many have some suggestions. (I am just starting to look myself) . So glad you are back!

John... i love that you are back man.. i missed you!..

Nice!! Another episode of Jay’s Arcade!!! 😄

Massachusetts logic: - Video arcade and pinball games will spread COVID-19. - Casinos and slot machines will not. It makes sense when you realize that it's hopelessly corrupt on Beacon Hill, has been for generations and people are probably being paid bribes.

Entertaining video, per usual. Thanks. Cheers for now.

John, please be careful using that microfiber cloth on the lexan/plexiglas, I made the mistake of using one of those on lexan and the fibers of the cloth melted into the surface of the lexan as they are both plastic. I highly recommend you only use cotton cloths on plastics. Lesson learned for me, fortunately is was something that was easily replaced in my case.

*Clean the edge connector fingers with a fiberglass pen, on the MH, then hit it with some DeOxit. And do it for both the game board and the adapter board. This should be done once every few years, and especially if you've never done it. That will keep 99% of Atari power issues away.*

I switched over to Comet Frosted Sunlight LEDs for GI. Its the best, not too warm not too white.

quality tuesday evening entertainment this, thanks

Im still using Radio Shack solder as well Tim ha. Agreed John, working on games with a few guys is better; you should hang with us monday repair nights at Freeplay in Prov. Cool vid. -Mitch

John, forget about that ARIII in the Paperboy. Power the video board with another switcher or get a 15 amp switcher and power both boards with that.

Great Vid!

Great Video..!!!

my life feels complete now.

John you are the reason for my existence.

If the van is a rockin', don't go knockin'

This is life, Buddies!!!😄👍👍👍👍👍👍👍👍👍👍👍👍👍👍! You are really (still) free, over there in the US!

I think the Arcade1Up cabs are great for what they are. If you’re expecting the quality of an arcade machine that would have cost you 10 times as much when they were new, obviously you’re mistaken. But if you don’t have money or space for real cabs, and you want some to bang around on and give you an arcade like experience with friends, or with your kids, they’re perfect. Plus, supporting companies like A1U will only be good for the hobby in the long run, imo.

If you have a short, you could use a FLIR camera to see what part gets hotter than usual. Yes, touching each part could work as well, but if you have more games and locations, you could use FLIR camera during normal maintenance to locate problematic parts that are on their last leg and it's much faster, if you check multiple games.

Dear Diary, Hi it's me John, I am in the basement, i have replaced the voltage regulators...........Great tag team, John, Jay and Tim , loving the videos

Jay's got a Transit!!! So great that they're sold in the US nowadays :)

It’s nice to see NBA Fastbreak back in the basement.

I highly recommend trying orange Titian rubbers. Found they play and clean much better than the regular white rubbers

Still have batteries on your board too, you should consider upgrading to nvram when you get a chance; then its 1,000% ha ; ) Nice work.

Hi john, something that looks a bit dodgy on those power supply’s is the glue that’s holding down the big caps. That stuff starts to become conductive when it turns brown so might want to check it’s not shorting any tracks or solder joints or via’s. man I wish I had that arcade set up during Covid lock down you wouldn’t of seen me for months .

John, I'd definitely be re-seating all the chips and even check all the ROMs... I've had ROMs bring down the voltage on one of my games...

I've noticed a few of the last times while you doing viewer mail, that spaceball game in the background the vertical keeps bouncing around.. might be a shorted tube in the vertical section..

I think what happened is that loop made switch wasnt registering, so that mean the game wont go into "in the paint mode" which uses the defender. I had the same issue with the right loop made switch, which is a harder shot to make. Also the diverter on that right loop is a pita.

I use to put John on ,and sleep to his Videos before Joe Rogan's podcast.KEEP THE CONTENT FLOWING BRO.

You some Titan colored silicone rubbers John! They are fantastic.

I was so waiting to see the update to Hanger like year and half years ago,but now my heart went to wtf moment ,it so sad.I hope it pick up John,miss the video from the past.

holy cow..I thought a regular arcade would have tons of mess inside..but that's nothing comparing to the pinball..it's a jungle in there.

NBAFB is so dope

Countdown in Pole Position never gets old. 🤔🙋😎

I also collect arcade games. I understand and agree with you completely on the Arcade 1-Ups. However, when it comes to TMNT and Burgertime, I own them. Why? I just cant see paying 2000+ dollars for either game. Those two specifically have just gotten so insanely expensive that I wouldn't own them otherwise. I'll probably eventually own the Golden Axe Revenge of Death Adder cabinet for the same reason. Also, isn't a Holy Grail game one you don't yet own because it's unobtainable?

FYI... Good solder flow is from the FLUX core infused in the solder...not the LEAD content in the solder...smh

Hey John I have a cruis n world that after 10 minutes of running it started to glitch out and now when I turn it on the screen and marquee turns on but nothing displays on the screen and I don’t hear any sound. Any idea what could be the problem?

Hi John. Great to see you back. Just wondering if you know of someone I can contact for a Time Pilot upright control panel with hinge. No need for the controls. Cheers 🍻 John

Popcorn machine, check. Stable table...

When you started Viewer mail, is TRON's screen kinda flickering or twitching? Maybe it's just the camera shutter speed?

Could you check your power supply by bridging the +5v and ground with a suitable sized resistor (several hundred ohms I think you said), and then measure if the same drop in voltage occurs as when you plug in the board? If so, the PS is bad.

Tha Golden Tee was a DDR before

Feel bad not John. I bought a WOZ YBR pinball machine NIB and had to take it back to the distributor to fix several issues!!! Disgusting!!!

Bought my camper in Westfield!

John any chance we might see or hear from Gregg like in VGO? I miss seeing colabs with Gregg and his crew too.

an arcade with a couple thousand roms vs the real ones. Which one gives you the classic feel to the retro world?

Only the grounds are common between those two power supplies.

John: Releases new video Me: Fan girl noises My wife: What the fuck is wrong with you? Me: More fan girl noises pointing at the screen. My wife: Are you going to watch that guys ass again? Me: Fan girl noises intensifies

It is illegal to sell lead to consumers here in eu now so it's impossible for me to get leaded solder anymore. When I run out of my good roll of leaded solder I'm not sure what to do, might order some solder from aliexpress and hope it gets through customs lol.

John, you don’t like working on the machines alone, so why don’t you do more live stream shows. Than the viewers can give you input on the problems you have.

You should have sprayed some deoxit into the switch and worked it in to see if it got any better ?

never check a fuse in the holder!

JAHN I've got some spare time on the weekends if you ever need a cameraman.

Someone should start selling a mini triangular bracket that would keep that board in place. The board has holes already. That's a good item to sell.

What's the control panel height on the ms Pacman cab

for me Gyruss is awesome...

Lol....The games i play most in my game room are donkey kong and dragons lair 2

I really did miss the kill screens music, any physically CDs available?

39:40 I'm surprised you don't own a Snake Light

Was this live god dam,i miss it.....

always always always shut the coin door before pulling the glass...

I ordered similar fuse box from Amazon, should be fast blows and not slow blows

If there's a pinball machine I would love to own is an F14 TOMCAT... I am so jealous.

Regarding the Arcade 1Up's...they are decent for the price. The company is improving their techniques and attempting to give you that arcade experience. Let's face it, though. It's Ikea Arcade. It's not as durable. Definitely emulated. And not all of them are coming with that height extending base. However, it's also not aging hardware that's going to be in need of TLC...at first. So, if you want that casual arcade at home experience, these are great. But, let's face it. Arcade 1 Up is like the super sized Hot Wheels vs. a real arcade that's like owning a Mustang. World of difference.

Acknowledge Arcade!

Can’t you order the parts online

Theres no way to 3d print some of these parts?

I can't stop looking at the computer space ball because its monitor keeps bouncing and collapsing in the background

Flux is your friend!!

T2 was and is the shit! And Earthshaker

HAI! Premieres rule!

Why don't you start a repairs record for each machine?

This paint is brown paint !