Love your Fun Attitude while doing a job! This is the best video I’ve found for fixing this problem. Shark told us it couldn’t be fixed, so we’ll do this. Thanks a lot!
@monroevac2 ай бұрын
You’re welcome thanks for sharing that. Fuel for the journey 😊
@lisareborn33072 ай бұрын
Thank you so much! This was the best video that I have found for this. So helpful. I was so frustrated before I found your video. You are excellent at walking through the instructions. Very doable 👍
@monroevac2 ай бұрын
You're welcome. And Thank you
@rutiger690111 ай бұрын
It's no wonder they told you to buy a new head!! Shark obviously DOES NOT intend for product owners to change those belts. It's a bad engineering design for that reason. A real good reason not to buy because we both KNOW that most owners are not capable of following your detailed instructions. You did a terrific job with talking us through it and providing close ups. I don't own that model but your tutorial is all I need to help me tear down my HV381C head to do belts. Thank you!
@monroevac11 ай бұрын
thanks for your feedback. I do agree with your opinion
@frypanjack13 ай бұрын
Wayne-tastic ! Thanks *very* much for this. I was going about this all wrong until i found your very helpful video. I really appreciate you spending the time to make these videos.
@monroevac3 ай бұрын
You're welcome
@thomaskelly361710 ай бұрын
Thank you so much….. I was able to see how to take apart my vacuum head and replace the nozzle connection. $17 on eBay for the part, and you (through this video) showed how to disassemble so I could repair. Thank you again good sir!
@monroevac10 ай бұрын
your very welcome
@Steve08858 ай бұрын
Wow, I looked everywhere about how to put those 2 pieces in and found your video. Thank you 😊
@monroevac8 ай бұрын
Glad dro help
@bryanarmstrong4322 Жыл бұрын
Thanks for the excellent video. I never would have figured out those tabs to get to the gears inside. great job!
@monroevac Жыл бұрын
Thanks I’m glad it helped 😀
@CraftyGirl76 Жыл бұрын
Omgosh! Thank you so much, Sir!!! This 64!yr old gal put in a new belt, thanks to you!
@monroevac Жыл бұрын
Glad to help
@erniew128 күн бұрын
Shark Duo Clean IF252 31 Brushes are not moving. Belts are OK. Suspect the micro switch. Need video on how to get the cover off to get to the micro switch which turns on the brushes when the handle is not upright. Have the sides off just can't figure how to get the center cover off. Appreciate your help.
@Kpapa082 жыл бұрын
This worked!! Thank you so much, sir!
@monroevac2 жыл бұрын
Glad it worked for you
@DKFIDO12 жыл бұрын
Thank You! I enjoyed your teaching! Your pretty cool!
@monroevac2 жыл бұрын
Thank you and you’re welcome
@Averagesasquatch Жыл бұрын
What kind of plastic do you think the upper cover of the vacuum head is made of? The plastic parts that secure the screws broke and I'm looking into the best adhesive to bond them back on. I'm thinking abs cement or acetone if it's abs but otherwise maybe an epoxy.
@monroevac Жыл бұрын
you can also try liquid fiberglass with hardener/ a strong Epoxy is fine
@jonyo3280 Жыл бұрын
great mate, on it now thanks to you !
@monroevac Жыл бұрын
You’re welcome
@douglasstriker651310 ай бұрын
Thanks for the excellent video. Is there a place where I can get just the belt for the hv 392 26. I found the smaller belt for the first one you replaced but the larger one is stretched out and I’m trying just to replace it. Thank you for any help.
@monroevac10 ай бұрын
is your larger belt grooved on the inside?
@shanevan5336Ай бұрын
Thank you for a very detailed explanation on how to take apart the head. My front roller has stopped working and figure it would be a belt. Are the dual head belts the same from model to model? Having problems finding the one for my model. (ZU881). Thanks again.
@monroevacАй бұрын
Unfortunately the belt sizes and type may differ depending on the model
@abeeromar43832 жыл бұрын
excellent I have a question I followed what you did excellent explanation but I found that the wheels what it holds the belt rusted what to do with it? And how to fix them? Thanks
@monroevac2 жыл бұрын
I believe that there are clip/ washer that if removed will allow you to remove the gear. Then you can clean. if not try auto penetrate spray. Very good for death with rusted gears and bolts
@abeeromar43832 жыл бұрын
@@monroevac Thank you so much
@abeeromar43832 жыл бұрын
I did spray yesterday a little it worked well
@stevenzuniga90622 жыл бұрын
What size belt is it
@carolhurley15072 жыл бұрын
Wow! Thanks! Gonna get this suckered fixed!!
@monroevac2 жыл бұрын
Good to hear. Glad to help
@gwenmorris1973 ай бұрын
My question is not in regard to your video. I need help troubleshooting a Shark Rotator NV750W series. The brush roller is not spinning nor is the light coming on. Also, the lights on the nozzle are blinking. I recently purchased a new head as well as a new hose and nozzle. It does the same thing. The old and new do the same thing, so what is the problem????
@monroevac3 ай бұрын
Hmm. I was going to mention the micro switch but you purchased another head and it’s doing the same thing. ( Is it a brand new head or used?) What are the chances the both have the same issue. If the head not the problem then you would have to work your way up. Eliminate the wand or the hose the main power switch until you find the disconnect. It’s a lot easier if you know of someone with the same unit. This way you can compare and see which part has no continuity. Lastly. It could be one of the circuit boards
@goodasnewrepairs2 жыл бұрын
Thanks.
@monroevac2 жыл бұрын
You’re welcome
@times461 Жыл бұрын
I got model la500....I can't find video on changing belt
@monroevac Жыл бұрын
I’ll look into that
@keithharmsworth56286 ай бұрын
Thanks , prising those last clips was the information I was looking for - what a crappy design. Definitely not intened to be taken apart by the owner. And so many slightly different designs. Mine was another with a slight difference, but the clips were the key thanks again.
@monroevac6 ай бұрын
Glad I was able to help😊
@Drummer55 Жыл бұрын
At 9:26 in the video, I need that little part that fits on the metal shaft to spin the front roller.
@monroevac Жыл бұрын
I think I have that part. Reach me through the channel home page. Connect with the email and I’ll send a pic of what I Have
@andrewbradbury85275 ай бұрын
❤ Never buy a shark hoover.. now even more difficult...models changing every few weeks.no available parts
@monroevac5 ай бұрын
No parts available is a big minus, also an opportunity for other oem companies to fill the void
@RigginTheRod0103 ай бұрын
My belt melted the plastic cover and was sticking out of the belt cover. Crazy that they don't sell individual parts knowing this was one of their best products at the time. Shouldn't have to pay for a whole new head. Anyone with half a brain should know how to take something apart and put it back together
@monroevac3 ай бұрын
Agreed
@christine86224 ай бұрын
Your video holds the answer I am looking for- how to put the 2 spring pieces back in. HOWEVER, as you are doing it, the video does not show the viewer what you are doing. BUMMER.
@monroevac4 ай бұрын
Ok…I’ll look it over. If possible, I’ll put up another video focused on that assembly. Thanks for sharing
@margaretmcquarrie9175 Жыл бұрын
Also need to see from the beginning IE weeks of ect