There are plenty of videos on how to clean shark vacuums, but this is the only video I found that actually shows how to take apart the vacuum for maintenance/repairs. Thank you SO much for making this video!! ❤❤❤

Mine quit working. I was able to get it apart & resolve the issue thanks to your video. I so, appreciated this today.

Thank you! We were having the hardest time trying to figure out how to take out the roller. We needed to clean out the hair that accumulated in the ends.

Thank you I took both sides apart, would not have figured it out without your video

Funny, I ordered both the main and front roller belts because I didn’t see the main roller turning. Because I’m not the actual user/operator of this thing, I didn’t know that you have to lean the vacuum back for the main roller to start turning! Oh well, at least I have the belt in case it ever does break!!! Thanks for doing these videos- you’re helping so many people!!

Thanks for this, was able to get my shark vacuum working again. Had to use a safety pin and flathead to clear debris from the roller brush

This helped me solve a problem I was having. Thanks for doing it!

Thanks for the video. The bigger roller was moving, but with great difficulty. The red light was coming on after a few seconds. The problem ended up being gunk/dirt/etc being stuck on the end of the roller inside the housing. It had built up so it was impinging the movement of the roller. It would move but only with extra manual force. Once I watched your video it helped me know how to get the parts apart. (Shark sure makes it hard to repair their stuff. Part of their business model it looks like. As a result next time we buy a vacuum it will definitely not be a Shark.) I was able to get it all cleaned up and functioning properly - but only after watching this video and going to home depot to buy the specialized tool that it requires due to the very specialized screws Shark uses. Thanks

Appreciate you making this video!

Great job explaining, thanks so much!!

Great video and explanation. Thanks for sharing !! JT

I'm so very thankful you took the time to make your videos. God Bless You.

excellent video- easy to see

Thank you very much. This really helped a lot.

Thanks Tony !

Lift-off feature-so convenient!

Big help, thanks for that.

Thank you for the video

Same belt for the AX950 / AX951 / AX952, thanks for confirming it! So hard to find though :(

Good job, thank you!

Thanks so much!

Hello when you are replacing the belt the little spring Unit came off how do you get it back on

The belt malfunctioned causing the brush role to crack through the plastic housing around it. I do not think it is fixable

I cannot find the part number to order on Amazon… help!!!

You don’t show how to put that spring thing back in. Is that some switch?

Thanks a lot for making this and the precious video. I took the bottom screws off and was struggling, so your videos saved me lot of time and effort. Anyways, in my case it’s not the roller that is broken it’s the holder that holds the main brush that is broken, making the main brush move forward and create a slack on the belt which inturn results in front roller not moving. Could I buy those parts as well ?

Both belts look great but no go.

The other side also has a belt on it

One thing to add to this EXCELLENT video is that there is a second smaller belt at the other end of the roller that drives the front brush. When reseating the main roller make sure it gets inserted into that second belt. That belt is not under tension so you shouldn't have to remove it's panel. My vac works great, but I now hate the company for this.