Neje MAX 4 Laser REVIEW

Рет қаралды 18,685

7 ай бұрын

This video is about the NEJE Max 4 diode laser engraver. I think it could be one of the most excited diode lasers now.
In this video, I explain why?
If you are interested in this laser, I would appreciate it if you could use the following link to enter their site.
shareasale.com/r.cfm?b=163232...
My main channel is "Hooked On Wood," with over 150K subscribers. / @hookedonwood
But I wanted to make a new channel that is more related to Laser engravers.
So, this is my first video on this "Hooked On Lasers" channel, and I hope you will subscribe. You can expect more content about Lasers, tips, and tricks, and you can follow me on the journey with my new CO2 laser I will get in a few weeks.
For reviewing this laser, I do have experience with Atomstack, Enjoywood, Neje, and Gweike Cloud laser engravers. This Neje Max 4 Diode laser is sent to me by Neje for this review.
As with all my reviews, this does not influence my experience or how I shared it in this review.

Пікірлер: 55

@TheLouisianaHobbyGuy 7 ай бұрын

*Good video and explanation Dennis!* I came over from the other channel. Glad to see you getting started with laser reviews!

@rogerwhoareyou 7 ай бұрын

The link work good. I look forward to seeing the content you create on this channel as well.

@knauerkustom 5 ай бұрын

thanks for the video! very good info in general and in special about the neje and its special features.

@norm5785 7 ай бұрын

Came over from your main channel. Definitely a great useful tool

@HookedOnLasers 7 ай бұрын

Great to have you here also!

@richardmonaghan1098 6 ай бұрын

Been watching you for a while.... Your the Rolls-Royce of timber..... It's a credit to you... Amazing work

@deano572 4 ай бұрын

Just got my Neje Max 4, this video was very helpful. Thank you for this video, happy new year…. Hope to see more Neje videos from you in 2024

@djkidsaturn 2 ай бұрын

How do you like it?

@HappyLife-vc1fv 7 ай бұрын

Very nice that you also start this new channel. Also following you on Hooked on Wood

@HookedOnLasers 7 ай бұрын

Thank you! good to see you here as well!

@HappyLife-vc1fv 7 ай бұрын

@@HookedOnLasers

@PatParvum Ай бұрын

Looking forward to your next hooked in lasers review 🙏

@gunterverbruggen7984 7 ай бұрын

Good luck with your new channel Dennis! Looking forward to the videos to come, as I do at your other channel.

@HookedOnLasers 7 ай бұрын

Great to have you on board!

@loudam4211 7 ай бұрын

Nice 👍

@JulioBarg 6 ай бұрын

Hi, Greetings from Argentina, very nice review, tyvm. Is a relly nice machine and capable !

@vulcan156 6 ай бұрын

Many thanks for the video Dennis. After watching it I ordered the Max 4, I live in the UK and it was delivered within a week. You mentioned that you would be doing a follow up video on this laser, which I would be very interested in watching. Do you know when you will be releasing the video? Many thanks and good luck with the new channel

@deano572 4 ай бұрын

Got my max 4 yesterday, took me 3 hours to get it fired up. Very frustrating to build with no written instructions and no prior experience/knowledge of lasers. Now I’m trying to figure out how to adjust the head for focus. Is it done on the machine or the software or a combination of the two? Haven’t found a video explaining that.

@laurentleroy2821 Ай бұрын

Hi Denis, can you explain how do you cope with fumes from laser cut into wood for example? Tks for your nice explain videos

@ronboe6325 7 ай бұрын

Still no 3D printers... :poke: :^). Good luck with the new channel. I suspect at some point I may get one - it just needs a home and I'm too tight. I'm working (it seems to be on the long range time line) on a RC balsawood airplane and the short kit was laser cut, but some bits don't fit all that well (I think they used the original die cut bits to program it, frankly the whole kit could stand to be redrawn in CAD so the lines are better) so this would be a real boon for redoing some parts.

@PatParvum 24 күн бұрын

Hi Denis. Have you tried xtools laser? With the enclosure and add fume filter it looks a good option to remove poisonous gases from cutting by burning.

@Drxxx 4 ай бұрын

cool device, i have anycubic mega pro with only 1500mW Laser, and i will buy max 4. did you recomend it?

@contracide Ай бұрын

Could you maybe review tyvok spider x1 10w laser?

@georgeturner6950 7 ай бұрын

Hi Dennis, I am new to laser engraving and am looking at getting the Neje MAX 4 with the E80 module. Do I need to buy a separate air assist module? Thanks!

@HookedOnLasers 7 ай бұрын

with the base offer on their site, you need air assist. So, when interested, I think the option with honeycomb panel and air assist is the best to make. These are two essential accessories you need. I found the price difference for these two accessories very affordable. Especially considering its large honeycomb panel. Best regards. Dennis

@oguzhan001 7 ай бұрын

Hi Dennis, that sharesale link in the description is incorrect, you didn't quite copied the whole thing. Also, is that hexagonal grid a consumable part?

@HookedOnLasers 7 ай бұрын

Thanks, I see it take a day, before they give this option available. Thanks for noticing!

@frederickmichaud6783 7 ай бұрын

Is there a need to consider some kind of air filtration?

@HookedOnLasers 7 ай бұрын

Absolutely. You need good suction. Best is to make a enclosure box with some holes to let it breath and a good exhaust fan outside.

@_rexhenry 5 ай бұрын

@@HookedOnLasers hi have just purchased this laser-my first - using your link but i realise i need to purchase or build some form of air filtration and would welcome your suggestions or a follow up video(?) on this - great channel

@JohanDegraeveAanscharius 3 ай бұрын

I think something is not correct. The diameter of the laser dot does not become bigger if you use the right lens. The lens makes the focal point. Please elaborate.

@dinotom1 6 ай бұрын

So if you only wanted to buy one laser, and the cost wasn’t a factor, I assume the Gwieke Cloud is the better purchase due to greater usability?

@HookedonWood 6 ай бұрын

I like the fact you can cut acrylic with the Gweike Cloud. But when woodworking is your main thing, and you will use it to create templates, this is the one. The size is so much bigger, especially with the extension kit. You can make relatively large templates. I like the Gweike Cloud for its build quality and how they ship it. The new versions do have a good automatic focus, and it has more power. For a Diode laser, this Neje would be my choice. The 20 watt is powerful enough and there is a good change that when the laser units itself would be even more powerful in a way it will make a difference, you can change it in the future for that one.

@CorinaStMartinArt 7 ай бұрын

Can this laser engrave correctly for example if you are engraving across a picture frame that has different heights? Or would that only be the case if you design the picture frame in Fusion, cut it on a cnc and then engrave with this laser. Which of course would be a lot of work.

@AlAmantea 6 ай бұрын

If the Z axis has even travel distance to handle the frame, then yes. this could be done.

@thingswelike 4 ай бұрын

Yes, you would need a cad model of the frame to be able to generate the 3D toolpath.

@yunadezign 6 ай бұрын

Hoi Dennis, What happened when the workpiece moved?

@HookedonWood 6 ай бұрын

I lowered 6mm total. Bit that leaves not that much space left. And because the honeycomb panel was not completely flat, this was the result. Did not have the time to do it over and it would not change the outcome by much.

@user-nx3zk5qi8t 6 ай бұрын

Would you recommend this over an xtool? I’m a true beginner and have never used a laser.

@deano572 4 ай бұрын

If you got the extra money get the X tool if you’re ok with its size I would pick X-Tool. The Neje really has no instructions, also had to build the relay for the air assist. Neje works well but I had to invest a dozen hours into KZfaq videos to figure it out. In my case I need the larger work area.

@attilakovacs6366 17 күн бұрын

what do you think about it, does the laser also work with other full-color, non-transparent Akrylic? In the near future, I would have a lot of work with non-transparent acrylics, white, red, yellow, etc.

@HookedonWood 17 күн бұрын

For cutting Acrylic I would invest in a Co2 laser. You can laser black Acrylic, but it is not as nice as with a Co2 laser. Especially when you want to sell something like that, I do not think it has the quality you want to offer.

@attilakovacs6366 17 күн бұрын

@@HookedonWoodthx a lot! I wish you the best of luck with your new channel!

@MehdiShatti 7 ай бұрын

Hi Dennis, Great video. I am trying to place an order but it says cannot be delivered to this address. I live in England. Can you tell me if I can order this item or not?

@HookedOnLasers 7 ай бұрын

I just mailed Neje. I will keep you informed as soon as I get the answer. I think this will be tomorrow in the morning. I wil respond your DM.

@HookedOnLasers 7 ай бұрын

I got this answer from Neje. Because after Brexit, goods from our European warehouses cannot be sent to the UK. Many logistics do not support sending to the UK and can only be shipped from China. However, shipping from China requires high freight and tariffs. We have currently transported a batch of goods to the UK and they are still on the way. They will arrive at the warehouse around November. We suggest that he wait for a while before ordering products shipped from the UK.

@MehdiShatti 7 ай бұрын

Thank you Dennis@@HookedOnLasers

@MehdiShatti 7 ай бұрын

What a pitty@@HookedOnLasers

@Doyle69 6 ай бұрын

Silly request, Possible to remove the black in your watermark? I find it distracting when watching your videos, my eyes keep locking on to it :(

@rnenjoyrightnow 4 ай бұрын

One thing i havnt got an answer to watching some videos. Do i need some kind of exhaust for the fumes/smoke from lasers? How do i solve that? I guess my smoke alarm will go crazy, and what about my lungs?

@HookedonWood 4 ай бұрын

Yes, you need some kind of box to place the laser in with an exhaust fan. Depending on what you want to do, this fan should be stronger. These lasers have become more and more powerful. And when you cut thicker wood, you burn more, and this smoke has to leave. Too much smoke can set on the lens, which can burn. The second reason is your health. The third reason is that when you have a good solution for this, you will use it much more. Such a box does not have to be complex. Keep some holes in it, so it can extract some air when the fan is running.

@rnenjoyrightnow 4 ай бұрын

@@HookedonWood Thank you so much for answering! Ok i see. Should it go to some kind of filter, or should it go outside? Outside is harder to solve.

@deano572 4 ай бұрын

@@rnenjoyrightnow definitely go out side with the exhaust. Search videos for “Laser Enclosure”