Testing the NEJE MAX 4, a large and powerful laser engraver 😳

Рет қаралды 8,766

7 ай бұрын

NEJE SHOP: neje.shop/products/neje-max-4...
AliExpress shop: www.aliexpress.com/item/10050...
he neje max 4 is also capable of Bluetooth operation 😉
A test video of the engraving and cutting machine in which the images speak for themselves. You'll be lulled by the natural sounds of the machine and the workshop, so you can make up your own mind.
I'd like to point out that this machine can also draw or cut sheets of paper with optional accessories.
NEJE offers excellent after-sales service and support (KZfaq, forum, etc.) to answer any questions you may have.
www.etsy.com/fr/shop/BreizhAr...
/ bawbreizhartwood
Please note my videos are not intended to educate or serve as a learning method.
They are used only for entertainment.
Do not duplicate what I do because it could be very dangerous.
Une vidéo test de la machine de gravure et de découpe où les images parlent d'elles-mêmes. Vous serez bercé par les bruits naturels de la machine et de l'atelier, vous pourrez ainsi vous faire votre propre opinion.
Je précise que cette machine peut également dessiner ou découper des feuilles de papier grâce à des accessoires optionnels.
NEJE offre un excellent service après-vente et un support (KZfaq, forum, etc.) pour répondre à toutes vos questions.
www.etsy.com/fr/shop/BreizhAr...
/ bawbreizhartwood
Attention mes vidéos ne sont pas faites pour éduquer ou servir de méthode d'apprentissage.
Elles servent uniquement de divertissement.
Ne reproduisez pas ce que je fais car cela pourrait être très dangereux
music composed and performed by myself
#nejemax4 #laser #lasercutting

Пікірлер: 23

@thepagan5432 7 ай бұрын

Decisions, decisions, I'm still saving but should be in a position to buy soon. This Neje looks good and powerful so closer to the day I will have to weigh up the pros and cons of 3 systems so far. Thanks Morgan, the laser on this one does do a good job, pretty quickly. Thanks for posting, appreciated 👍

@bawbreizhartwood 7 ай бұрын

Hello the pagan In fact, I have tested a lot of lasers and I must say that I like this one because it is robust and scalable according to your needs, you can choose several different laser modules or enlarge the working surface

@sterlingniko7325 2 ай бұрын

Perfect no BS video. Subbed!

@bawbreizhartwood 2 ай бұрын

Thank you so much for your comment 😉

@gpanizzolo6090 7 ай бұрын

Muy buena adquisición! Que la disfrutes! Un abrazo Germán, desde Lomas de Solymar, Uruguay

@bawbreizhartwood 7 ай бұрын

Thank you so much German 😉👍👍👍

@joanthompson8586 7 ай бұрын

Amazing!

@bawbreizhartwood 7 ай бұрын

Thank you so much Joan😉

@jaroslawrzepecki5081 6 ай бұрын

Good video! In how many passes did you cut that 0.25inch MDF?

@bawbreizhartwood 6 ай бұрын

Thank you 😉 I did it in two passes

@lerangesoundstyle6044 3 ай бұрын

Thanks for the video. Am I correct in saying you tested without air assist? If yes, would it have given even better performance with air assist?

@bawbreizhartwood 3 ай бұрын

yes, this machine already works very well without air assistance, but adding a good pump will give you better results.

@jackthompson5092 7 ай бұрын

A pretty neat toy Morgan.

@bawbreizhartwood 7 ай бұрын

😉Jack

@srenanderson-schmidt621 3 ай бұрын

Are you using your own settings or what?

@bawbreizhartwood 3 ай бұрын

the parameters are to be defined according to your wishes and the materials used

@Zzrdemon6633 7 ай бұрын

Kind of makes me regret getting the xtool now, z axis is a game changer, large frame and half the price

@bawbreizhartwood 7 ай бұрын

the world of laser engravers is evolving very quickly and it is not always easy to make a choice

@snjezanzivak1632 7 ай бұрын

Hiiii i uave the same laser and i have one problem that i dont know how to fix im watching your video and your machine is not doing that as mine and i dont know why is my doing that. When i send laser to do something and when its done or finished with work it lifts module up and it goes to front left as always but when its done with work and when it lifts module on Z axis and when it touches limit switch on Z it starts jumping up and down its like it wants to go more up but it cant it hits limitswitch and goes down few mm and it goes up again and so on for few times and then it goes front left....but when i send the machine home its not doing that it is ok it touches limitswitch and it goes down few mm and goes home..... do you or anyone knows why is my module jumping....thank you

@bawbreizhartwood 7 ай бұрын

yes, it does this because you have entered a value in the "material thickness" box. You must not enter anything in this box.

@snjezanzivak1632 7 ай бұрын

You are right it does that because of that