haha

All the way to the bank to pay the flexpipe bill 😂

I guess Im asking randomly but does someone know a trick to get back into an instagram account? I stupidly forgot my login password. I love any tips you can offer me.

@Malik Gordon Instablaster ;)

@Benson Kayden i really appreciate your reply. I got to the site through google and im trying it out now. Seems to take quite some time so I will reply here later with my results.

How much is it please thank your

​@@jaspalsinghrupra617I had my car diagnosed they said 1k lol I was like nah ill buy the pipe for 30 and fix it thanks tho might be fun here in a bit

You can literally buy them at Autozone it’s not illegal lol

@@eligreg99 I know that now, but I was a young ignorant kid at that point. The thing is, I think I may have said something about bypassing a catalytic converter. If so, that would explain it lol.

Yep depending on the state. Not legal in MA. Inspection shop will fail yoyr car when they find it, or any other of the tinyest leaks in the exaust. So no mufler clamps eighter, they leak they fail.

You can just use exhaust clamps I would imagine

Cheap ramps, a second hand welder and patience. Still cheaper than a muffler shop

Or a measuring tape, a jack, JB weld exhaust tape, some exhaust U clamps and about 20 minutes

😂 True

Ik right I was just about to get mad I paid for this at the mechanic lol

What kind of clamps , and can you tell me the type of exhaust pipe cutter to get , or is it just called exhaust pipe cutter ? Thanks .

It's True. :-)

@@nepazarolj Can you read my comment. I had mine changed on my 09 Porsche Cayenne S . The next day it was shaking when I turn it on, the check engine light kept blinking and all types of misfired engine codes came up.. I took it back. What did the do wrong?

It cost about $120-300 more for the entire pipe when you can just pay about $30 foe the flex and weld it yourself. So basically he saved himself about $400.

I believe it's called an impact driver

Yes it does! O2 sensor get a bad reading from exhaust gas!

Exhaust is loud

There's no acetylene torch in this video.

@@JohanYavari amd yet you know what meant. are you a bot or are you bitter?

i personally think so. my car running a cylinder 1 misfire code. i've changed the spark plugs twice now in 1 month. changed the spark plug wires with OEM ones. no fix. my biggest guess since it is also reading catalytic converter and o2 sensor issues is that my converter is clogged ( car is a 98 and been sitting majority of it's life with little to no maintenance ). was going to try and change the o2 sensors only but my converter came in ( already bought it ) so im changing that. only other thing that i can assume really is clogged fuel injectors. im not a mechanic though so i can't verify. right now im just getting ready to change my setup myself.

sadly after changing my converter the misfiring still didn't stop. car runs smoother/quieter not though but yea it still misfires. i've tried STP intake valve cleaner not totally sure if i did procedures properly as my car doesn't have RPM meter on it. that helped a little with the rough idle but still misfire code i really don't know wth is wrong with it. like i said my only logical guess at this point is injector is clogged. it drives fine at this point but when idling/stopped that is when you really feel the rough idle from the misfire.

Mild wire for these pipes. Stainless wire for stainless exhaust systems! Best regards!

im guessing maybe a leak? cheaper to fix the flex part then the entire setup just like with catalytics if you can weld then just cut it out and put in new ones and weld it in place or i've seen one guy bolt it on with clamps too. if leaking then best to change the gasket as well they are cheap. spray the nuts/bolts with penetrating oil it's what im going to do especially since mine are rusted af. can't really torch my converter either i dont have a torch and also i still can't torch the front end due to lots of grease build up. would easily cause a fire

Looked like he dropped the pipe to get at the other end of the flex with a welder.

My only guess is he needed to reach the top of flex pipe to finish the weld ....so maybe a new gasket to be on the safe side. I could be wrong though

Lyf3 1z TOUGH ikr??? This was such a wasted watch

it time to time has a leak

Those flex pipes rust out. They get weak from flexing with the movement of the vehicle and are a rust magnet.

هل تلفها يسبب رجه بالسياره عند Dاو R

واش اسمو

Its a wire feed MIG style welder using argon gas, more than likely at a 75% Argon 25% Carbon Dioxide (CO2) mix. Welding exhaust takes a steady hand and a low temperature because of how thin the metal is.

Handy Mig 205 Its a hungarian Corp.

Csabi egy Superman. Bírja. :-)

Exhaust pipe cuter-chain cuter.

Szerintem láncos vágó.

Usually we are.