No video
Nerf Musket V2-2: Bigger and better (K26 Spring)
Рет қаралды 1,864,468
Күн бұрынGet the files or blaster from the links below!
You can now print V2-2 of this flintlock blaster, which has enough power to compete with anyone else on the field. As long as they are only shooting three shots a minute.
Print Files:
- www.etsy.com/s...
Print partners:
- www.etsy.com/s... (rohan.soc@gmail.com)
- 3ddeluxestore@gmail.com
- ares3d.ca/
Assembly video:
- • Nerf springer musket a...
Print instructions:
- docs.google.co...
Instrumental Grenadier track provided by Aceaudio / Pond5
Synthwave Grenadier track commissioned from MildredBeats
@LARPBeard 2 жыл бұрын
I did not expect you to go in the full on k26 plunger tube route, what a pleasant surprise! Will the wheelock version get a similar treatment? The warhammer larping community will rejoice!
@carnyrex1872 2 жыл бұрын
This barrel is already compatible with the wheellock I made before, all of the barrel designs are interchangeable. The styling is slightly anachronistic for that use but it works :p
@LARPBeard 2 жыл бұрын
@@carnyrex1872 oh no, I fear another printing project is immanent XD
@bogdanlandzhev4870 2 жыл бұрын
@@carnyrex1872 Now where is the bayonet lug?
@r0dman11 2 жыл бұрын
I don't give a flyin fuck. The reason I am named Bluecoat is because it is the opposite of a Redcoat, AND I NEED ME FLINTLOCK CARBINE.
@KarlDonitz1991 Жыл бұрын
@@carnyrex1872 in a previous video you said you don’t do commissions I was wondering why that is?
@corbynmejia2340 2 жыл бұрын
Since there's no bayonet and is shorter than most muskets, you've really made the flintlock carbine, which was favored by cavalry men.
@TylerSnyder305 2 жыл бұрын
Maybe a Musketoon.
@rydernewman8712 2 жыл бұрын
make a wider barreled version of it, you have a blunderbuss!
@carnyrex1872 2 жыл бұрын
Pedant! But yes this length is probably more appropriate for a longish carbine. I’d make it longer but there would need to be more structural magic that’s hard to do without adding more metal to it.
@asianbois522 2 жыл бұрын
Sounds interesting..... Wish I knew what any of those were =\
@Kyuschi 2 жыл бұрын
@@carnyrex1872 this length is about exactly the same as the sea service brown bess actually
@pant0sand0hat 2 жыл бұрын
Nerf isn't my hobby, the algorithm sent me here. That being said it's very easy to admire what you've done here. Beautiful work, well explained, and generously shared.
@BennettIsAmazing 9 ай бұрын
Me neither. Never watched a nerf video ever? Still cool. Glad I watched.
@uriah-s97 8 ай бұрын
Same, I build real ones though. But this is cool as it gets dude, kids would be stoked for this!!!
@stalfithrildi5366 9 ай бұрын
What makes a good KZfaqr Sharpe? The ability to fire three darts a minute, sir.
@hirodaniels9645 10 ай бұрын
The absolute beaty of the 3d printed musket is amazing. Not only did you make it function like one, but the print is so clean that at a distance, it looks like it came from an injection mold. Absolutely amazing!
@CntrazZombie4 2 жыл бұрын
Given that a musket traditionally used round balls, and the mechanism that fires nerf darts is largely just a big spring, I'm surprised it's taken so long for me to find something like this.
@whoelsebutmeofcoursei 2 жыл бұрын
Anyone can make one nerf musket in their basement but it took this guy to achieve it
@bitgrenadier5798 2 жыл бұрын
the dart is just a paper cartridge that fires the entire thing
@sa.8208 2 жыл бұрын
this is just atoms arranged funny
@whoelsebutmeofcoursei 2 жыл бұрын
@@sa.8208 truth
@Thatguy60929 2 жыл бұрын
Technically its a flitntlock carbine because of the lenght and no bayonet
@TungstenBlade 2 жыл бұрын
"I own a musket for home defense for thats what the founding fathers indended" An American nobleman.
@loger_2floofyboogaloo278 2 жыл бұрын
what the devil?! i proclaim as i don my powdered wig and grab my kentucky rifle
@maryjoschuette1162 2 жыл бұрын
Blow a golfball sized hole through the first man hes dead on the spot
@weapons-gradepotatonium9219 2 жыл бұрын
Draw my pistol on the second man, miss him entirely because its smooth bore and nails the neighbors dog
@loger_2floofyboogaloo278 2 жыл бұрын
@@weapons-gradepotatonium9219 scream tally ho! as i fire the cannon, from the closet, full of grapeshot. obliterates him. for god and country
@Jabberwockybird 2 жыл бұрын
The blast, the sound and extra shrapnel set off car alarms. Fix bayonet and charge the last terrified rapscallion.
@BDNeon 2 жыл бұрын
This is pretty much the mental image in my head of my 90s childhood nerf blasters when I see the ones today with the magazine feeds, automatic capability, and tactical rail systems.
@specialism640 2 жыл бұрын
After all of these years, you ignited my fascination in toy blasters.
@outofdarts 2 жыл бұрын
Awesome design! I love the thought put into the ramrod prime.
@snipernipernipe4261 2 жыл бұрын
I love what you have been doing with the muskets and wheelocks. You should make a bolt action some time, preferably from WW1.
@salmoncloth7050 2 жыл бұрын
Ohh man a Lebel 1886 would be so cool.
@MrMolotov888 2 жыл бұрын
@@salmoncloth7050 Yeah, it would be way cooler than a typical bolt action but an internal mag that is loaded from the top would probably be easier to make...
@cfeauto5938 2 жыл бұрын
Martini Henry. You have an entire lever to prime as well as making it a breech loader
@zacbeck5404 2 жыл бұрын
he actually showed one in the video, the indra. a cosmetic tweak, change to the plunger system, and a short mag would make it perfect.
@joespeed1952 2 жыл бұрын
I would love to see a Krag. One of my favorite turn of the century rifles.
@HistoryBoy 2 жыл бұрын
Absolutely love it! Fantastic work. I can tell that you really care about the history as well.
@tristikov 2 жыл бұрын
This is awesome! Love the attention to detail with the lock. I don't own a 3d printer at the moment, but if at some point I get one, I know what I'm gonna be making with it!
@carnyrex1872 2 жыл бұрын
Check the description I give some links to people doing them on commission.
@drflux 2 жыл бұрын
Yeah this just makes me smile as my Grandfather (when he was alive) was a Black powder flintlock gun smith and made many rifles. He also won many awards and trophies for black power musket shooting.
@GhostofJamesMadison 10 ай бұрын
You have failed him. Your grandfather made masculine art, you play with toys as an adult.
@jjoohhnn6065 9 ай бұрын
His dad made toys too, his toys just fired metal balls
@drunkcat545 8 ай бұрын
@@GhostofJamesMadisonWth dude
@kennethshock 2 жыл бұрын
As we've previously discussed, I am tooling up to be able to produce kits for Canadian and US customers. I'm experimenting with different types of wood stains on the PolyWood printed stock pieces. I'm also presently fine tuning a new Creality CR-10 Smart for the longer/taller pieces. 😁 I should be ready to go Feb 1. 🤞
@carnyrex1872 2 жыл бұрын
PM me contact deets and I'll put them in the description!
@legoyoda645 2 жыл бұрын
Are you planning on selling these?
@billcipher8787 2 жыл бұрын
So, just be clear, you are selling these 3D printed nerf guns?
@felixlavulpe3506 2 жыл бұрын
My wallet is ready.
@waywardfaunus4738 2 жыл бұрын
How much would these kits cost and can the files be modified before printing for example, a longer stock or shorter barrel
@gnetkuji 2 жыл бұрын
I want one of these things really badly! Still, I'm such an insufferable history nerd that the first thing I thought of when seeing it was "I wonder how you can add a half-second delay to the firing so that the lock would complete it's motion before the ball begins to fire" to make it more realistic and, thus, harder to aim. Also how to make a matchlock-looking head on it, but that would just be a simple cosmetic.
@carnyrex1872 2 жыл бұрын
I’m working on a matchlock now, there is some later English civil war era matchlocks you could graft into this shape without too much extra work but that’s another path. The timing of the mechanism is a constant bug bear - originally the elastic ones / previous versions had it timed properly, but it takes substantially more pressure to release this catch, hence the mechanism let’s go first instead of at the same time.
@TaterTot11 2 жыл бұрын
I love the fact that you included "British Grenadiers" in the intro. Perfect choice.
@justajolt 2 жыл бұрын
What makes a good Nerfer? The ability to fling three foams a minute in any weather, sir. Now try saying that five times quickly...
@thRegimentofFootThethRifles 2 жыл бұрын
Making a Sharpe reference in a nerf video? Say it with me. *NOW THAT'S SOLDIERING!*
@sir_cabbage1170 2 жыл бұрын
What makes me a good Nerfer? If I were a bad nerfer, I wouldn't be here discussin' it with ya, now would I?!
@thRegimentofFootThethRifles 2 жыл бұрын
@@sir_cabbage1170 You won't be able to hear the battle. (because they're using springers), but you will be able to see it.
@justajolt 2 жыл бұрын
@@thRegimentofFootThethRifles Fitting an external and unnecessary flywheel cage to a Nerf Musket? Now, that would be soldering.
@thRegimentofFootThethRifles 2 жыл бұрын
@@justajolt Maybe we should give it to Harper in place of his volley gun...
@tarpguy_ 2 жыл бұрын
I love how it is the simplest of almost all priming mechanisms, but it just works so well, and it is so cool to see a musket blaster. Maybe not the most competitive og designs to choose from, but God would it be fun to use in a nerf war
@jasonbenson036 9 ай бұрын
As a fan of both Nerf and muskets, this makes me super happy.
@thebeef3431 9 ай бұрын
As a fan of the game "Sea of Thieves" the first idea that popped into my head was printing this off, constructing it, modding and painting it up to look like the in-game weapon "Eye of reach" Excellent project
@Candrsenal 2 жыл бұрын
Rad. Also I'm betting Nerf would be compatible with a Kropatschek magazine system.
@MrBioniclefan1 2 жыл бұрын
wait what?
@Immafraid 2 жыл бұрын
C&Rsenal jumpscare
@TheMazzette46 2 жыл бұрын
Ok, I definitely didn't expect to find you guys here, what a pleasant surprise
@MrBioniclefan1 2 жыл бұрын
@@TheMazzette46 same
@carnyrex1872 2 жыл бұрын
There is a few tube loading nerf blasters out there, but they all rely on individually printed shells for the darts to reduce pressure so they don't squish together and cause a jam (e.g. kzfaq.info/get/bejne/ipd0Zqp5qtK4p2w.html). If I were to build a janky old school magazine system for nerf, it would probably be a variant of some of the early gatling gun drums (Accles system I think?) that use a rotor powered by the firing action, putting relatively even pressure on each round. Although my mock up of one so far only fits sixty darts :P
@whalesong4649 2 жыл бұрын
I am a nerf fan and a HEMA practitioner. These blasters are really amazing!!! They are great props for LARP or SCA or other group activities! Thank you for designing these!!!
@whoelsebutmeofcoursei 2 жыл бұрын
I hope someone mixes HEMA with Nerfs someday so we can get "Historial European Cavalry Tactics" as a sport.
@TheSecretman82 2 жыл бұрын
Which time period of the SCA would these fit in? I thought all of our available time periods were before muskets.
@carnyrex1872 2 жыл бұрын
@@TheSecretman82 These flintlocks are too late for that. But Wheellocks (as per my other design) appear in Europe by the 1500s, and matchlocks almost 100 years before then. For at least ~100 years people in full plate armour might have pistols.
@theposhdinosaur7276 2 жыл бұрын
@@carnyrex1872 Actually on the note of using this stuff for LARP (I dunno if that might constitute a hazard for hitting eyes? I guess not more than a LARP bow). There already exists LARP flintlocks, but they are literally just props which cannot fire, instead the flintlock mechanism has a percussion cap on the buttom part which the hammer hits, making a small explosion sound and sparks to simulate gunfire. This means that in practice a gunner must simply point it at someone, fire, then tell them they've been hit. The only things which could really make it better would be if: A: there was that percussion cap mechanism to still get the explosion effect, but this might require specialized metal parts, since I don't know if it would melt the plastic. B: if it looked more like an actual musket, but without making the stock out of wood that might hardly be feasible. Looks wise it may simply be enough to colour the "metal" silver and the stock brown. But putting that aside I totally want to see small armies of 12 year olds with those toy foam sabers, redcoat costumes and your rifles just going at it.
@carnyrex1872 2 жыл бұрын
@@theposhdinosaur7276 There is quite a few larps (particularly in Europe) who use far scarier stuff than this, e.g. deodorant powered air cannons that shoot similar ammo. But in my humble opinion a 180+ fps small projectile does not belong in an environment where people don't wear eye protection. Maybe the elastic stuff with the rival balls is a bit more appropriate at 90fps. I'm currently working with a few folks to make a "cap" version which uses the little red caps for a bit more theatrical bang. But overall my stuff only accidentally became associated with LARP, that was not the original intention.
@jasonwoodland474 2 жыл бұрын
Awesome job. This is making me want to get a 3d printer. Can't wait to see what you make next.
@SniperOnSunday 10 ай бұрын
I remember seeing the previous design a while back. Glad to see the updated version.
@Portlandhardstylers 2 жыл бұрын
I'd love to see a mechanism that delays the trigger release until after the striker hits the flint hits the pan. I know mechanical delay can at least be achieved using two spinning cams which interface after one spins and picks up the other like a combination lock.
@Earthenfist 2 жыл бұрын
Could also just have a double'd trigger- the finger-trigger trips the flint, and the flint hits the striker, which moves, and trips the firing trigger.
@yankeedoodle7365 2 жыл бұрын
As a reenactor, I support this, these are very cool, and also not as messy as the real ones, might get one myself
@mitchthepreacher1512 Жыл бұрын
This blew my mind, what a wonderful design!
@liamholmes8487 2 жыл бұрын
I own a 3D-printed musket for home defense, since that's what Carny Rex intended. Four store-bought nerf gun users break into my house. "What the devil?" As I grab my powdered wig and Nerf Musket v2-2. Blow a rival ball sized hole through the first man, he's dead on the spot. Draw my original flintlock pistol on the second man, miss him entirely because the flintlock mechanism isn't as snappy and nails the neighbors dog. I have to resort to the nerf cannon mounted at the top of the stairs loaded with filament off-cuts, "Tally ho lads" the filament shreds two men in the blast, the sound and extra plastic set off car alarms and damage my 3d printer. Fix bayonet (after waiting a few months for it to be released) and charge the last terrified rapscallion. He Bleeds out waiting on the reenactors to arrive since triangular bayonet wounds are impossible to stitch up. Just as Carny Rex intended.
@Thewildone-rc2ke 9 ай бұрын
Someone had to.
@user-dl5oy7en1d Ай бұрын
OK,you. Just gotta love the respect for this man this guy typed an entire paragraph you just gotta love that
@JahtheIII 2 жыл бұрын
I was so exited to get this, then I realised I needed a 3D printer, this is really cool and seems so fun!
@Toka-MK 2 жыл бұрын
Nice work! I used to have a 3D printer but sold it when I moved. Seeing your creations has made me want to buy another one!
@fredjackson8408 9 ай бұрын
Nusket or nerfsket?
@kevinhampton9895 2 жыл бұрын
This is amazing! I always wanted one as a kid and still so as an adult!
@andrewromig9753 2 жыл бұрын
I've been monitoring these for a while with interest, but just never felt like it was "ready". This. This is ready.
@haideeubas3377 8 ай бұрын
WE KILLIN THE RED COATS WITH THIS ONE 🗣️🔥🔥🔥🔥💯💯💯💯💯
@filipantkowiak7559 2 жыл бұрын
This is unironically one of the coolest things I’ve seen in a while
@idrissamorehouse5776 2 жыл бұрын
When i saw this i was like “OH NO HE DIDNT - even with the ram rod ?!” Lookin sweeeet !!
@Hoyt-pn3ky 2 жыл бұрын
"Own a musket for home deffence"
@soulcutterx13 2 жыл бұрын
I am actually in love. I haven't thought about NERF since 2007, when it was all "just throw a copper tube in a store blaster go fast", and this is just so friggin' cool. Thanks Mr. Rex, and thanks KZfaq algorithm. Another reason to buy a 3D printer with my no-money.
@rickbrasche8781 5 ай бұрын
been following this for a couple years. been resin printing for longer but had issues with materials that could handle Nerf use. got my first FDM printer yesterday. first thing this morning logged into Etsy to buy the files! can't wait to start printing!
@peterrobinson2780 2 жыл бұрын
Have you considered making one that shoots Mega or MegaXL? That would be really cool
@LARPBeard 2 жыл бұрын
rival and mega are practically intertangle diameter. optimizing for it is a different matter.
@whoelsebutmeofcoursei 2 жыл бұрын
Just waiting for him to make a Blunderbuss, so you can fill the barrel up with balls
@meatloaf_gaming1016 2 жыл бұрын
Bruh that would be a blunderbuss
@meatloaf_gaming1016 2 жыл бұрын
@@whoelsebutmeofcoursei YES LMAO
@carnyrex1872 2 жыл бұрын
I finally got some Nerf Mega, Mega XL still has to travel a while to make it here to Elba. Hopefully can start integrating alternate stuff.
@DakkaScrappa 2 жыл бұрын
"i own a musket for home defence cause thats what the founding fathers intended"
@Vizsla-wy3ql 10 ай бұрын
"I own a musket for home defense, since that is what the Founding Fathers intended."
@17thlightdragoons 8 ай бұрын
We just bought the files on Etsy and we're so excited to print some of these! We're a Rev-War reenacting group and one thing we wanted to do this year was get the kids more involved at events next year because you have to be 16 to fire a musket on the field. So a few of us dads saw this on Etsy and thought, what if we print a CRATE full of them we can bring to reenactments and then have a dad vs kid nerf battle so they can learn the drills and maneuvers? Plus it gives the kids something to be excited about when an event comes up. Thanks so much for such a neat build. We cant wait to share some pictures!
@sinisterisrandom8537 2 жыл бұрын
This is honestly amazing, kind of curious, if we will see a scoped Musket and Iron Sight Musket nerf rifles.
@Don-bi6zc 2 жыл бұрын
This is brilliant, my son loves nerf. I am sick of the tacticool aspect of modern toys, this gets back to basics and teaches patience.
@VisualBasic6 2 жыл бұрын
I can't believe how much sense this makes. I love it.
@retrac3180 9 ай бұрын
Damn wish we had these as kids. Linebattles with the boys irl would be insane
@cpl.barbarusc4814 2 жыл бұрын
This musket/carbine could be used on a Nerf horror themed game like a colonialist version of HVZ on a haunted house or village.
@staanislaw 10 ай бұрын
Nerf themed guts and blackpowder
@cpl.barbarusc4814 10 ай бұрын
@@staanislaw yeah, inside of a place that looks like a haunted field or something.
@AshThePuffin 2 жыл бұрын
This is amazing! Great work! Heaps of talent on display if you ask me.
@erinlane1769 2 жыл бұрын
This would have been my dream Christmas present as a kid.
@The_Gallowglass 2 жыл бұрын
HOLF is absolutely a unit of measurement.
@simonfritsch9922 2 жыл бұрын
Wow amazing job! I wish I could buy one, since I don't have a printer myself. Did you ever consider doing a martini-henry by any chance? Greetings from Germany!
@yourmom-ir9ze 2 жыл бұрын
My Lord, this is quite the firelock. I simply must possess one, I wonder if anyone is selling kits?
@kennethshock 2 жыл бұрын
I will be, hopefully in Feb. I'm just finishing up fine tuning a new 3D printer and experimenting with wood stain on PolyWood (a type of PLA that looks like wood). I'll be giving my contact info to CarnyRex so he can add it to the video description.
@yourmom-ir9ze 2 жыл бұрын
Many thanks!
@rosendorodriguez9862 Жыл бұрын
Frontline foam has them pre-assembled
@SeanLaMontagne 9 ай бұрын
I would love to have an airsoft Flintlock/musket. But a high powered version of this might get the job done better, and the nerf rival balls are just *chefs kiss* for the immersion
@TrainCon1958 2 жыл бұрын
"Just as the founding fathers intended." -Some wise patriot in a meme
@Mr.BondMan1812 2 жыл бұрын
I don't know why nerf don't produce something like this. I could see lots of young and older people taking interest in this!
@thatminecraftdude5805 2 жыл бұрын
My printer is too small to print this. Is there any way to buy the parts without having to print them? I really hope there is because I am a huge war buff and love nerf guns and guns in general and I love how realistic it is and how it can actually shoot good.
@eddiethemexiii 9 ай бұрын
This is the video I chose to watch during my break🤣
@colson3050 2 жыл бұрын
these would be great for community engagement areas at reenactment events. gives a thing for the kits to play with that gives a pretty good historical feel.
@grahamturner2640 2 жыл бұрын
It would be interesting to see someone try to print parts of it in wood and stainless steel PLA for the cosplay (yes, those filaments exist, and the wood PLA is only about twice as expensive as normal brand-name PLA, though the stainless steel stuff is much more expensive).
@kennethshock 2 жыл бұрын
I am doing just that.
@bowsewr7074 2 жыл бұрын
I just got a spool of hatchbox wood pla In last week just for this purpose. See how much trial and error settings will require. Barrel will be in eSun pla+ grey.
@carnyrex1872 2 жыл бұрын
I’ve done this with a few of my other builds - the wood works great, but the iron/steel filled stuff is extremely brittle so does not work as well. Fortunately various “silk” PLAs like e-sun silver do a very good job for metals
@LARPBeard 2 жыл бұрын
@@carnyrex1872 seconded, silk is the way to go.
@JanSenCheng 2 жыл бұрын
Any chance you could make files for a full length version? I would totally print out a whole lot of those for some nerf line infantry battles.
@user-nv5cf4bp2x 6 ай бұрын
I love the background music (La Grenadieré)
@Misadventuresofcamreaboy 8 ай бұрын
WE MAKIN IT OUT OF THE 1800S WITH THIS ONE 🗣🗣🔥🔥🔥🔥💯💯💯💯💯💯🗣🗣🗣
@Deadclown45acp 2 жыл бұрын
Honestly I'd be willing to buy a prebuilt one from you if possible
@teresadelorenzo2181 2 жыл бұрын
You are right
@TheMwarrior50 2 жыл бұрын
Why not make it modular to increase the length of the musket to an original 50+ inches? I want to live my childhood dream -An adult who is a kid inside
@UrMothersLoverr 2 жыл бұрын
I was about to think this thing is weak up until I saw it shoot a rival round now im sold on buying these files
@nuclearexterminator7037 2 жыл бұрын
I don't think I remember any British captains saying "Tis Nerf, or nothing." Great video btw
@ShadowOfMachines 2 жыл бұрын
New goal for 2022, make a NERF blaster. Would be the first NERF thing I would have owned for a long time.
@makenziemay5449 2 жыл бұрын
This was and still is the nerf gun of my dreams dude!!
@ForceM1782 9 ай бұрын
This looks really sweet and professionally made.
@ohioanbutt_ticklingbandit 2 жыл бұрын
The guy who wanted to recreate Breeds Hill: *Finally. After all these years.*
@EdgeOfCinder 2 жыл бұрын
Man literally is traveling back to the old ages
@Red80008 7 ай бұрын
This is probably... no... DEFINITELY the coolest thing I have ever seen!! I'm so stoked and can't hope more that Hasbro adapts that 🤩
@isaiahcampbell488 9 ай бұрын
In battle during the era they would sometimes use "buck and ball" which was basically several small pellets behind the main ball. You could do that with dropping several of the mini rival rounds behind one standard rival ball.
@scottbrick1011 8 ай бұрын
Love this, as a member of SAR- we do presentations for kids. This would be great
@statelyelms 9 ай бұрын
This is great! Surprised it took someone this long to make one, seeing as Nerf is already inaccurate and has round balls (the inaccuracy would feel more at home in a musket, and they used round balls) and also just pure cool factor. When you make the bayonet, I'd recommend making it be that telescoping style where it pushes back into itself, with the illusion that it's sinking into whatever you're pressing it against!
@FolarTheGreat 8 ай бұрын
The sharpe reference makes me so god damn happy
@amata415 2 жыл бұрын
My gawd, I had no reason to buy an FDM 3D printer till know. I love my resin print, but damn that musket is awesome!
@themightyironoak 10 ай бұрын
Should make your own dart blaster company and make all your blasters based off historical weapons, would definitely buy some of those, it'd be pretty successful I think
@fornax4676 2 жыл бұрын
I needed this in many a battle in my youth
@zanthimos 10 ай бұрын
As the Founding Nerfers intended! Sadly, I can't help but notice there being a distinct lack of bayonets on everything.
@Alex_K221 9 ай бұрын
“I own a nerf musket for home defence since that’s what the nerf founders intended.”
@gigaflynn_ 9 ай бұрын
Just as the founding father's intended! XD Great work Carny, this is awesome!
@austinclay8622 2 жыл бұрын
I'm having fun imagining a bunch of neighborhood kids arranged in firing lines having a Nerf fight with these.
@revolver117 9 ай бұрын
As someone who doesn’t have a 3-D printer, a little suggestion would be to make some that are able to be bought and shipped to your house
@MattTheriot 9 ай бұрын
VERY cool! Would be a ton of fun for mock revolutionary battles with your kids.
@ThomasRonnberg 2 жыл бұрын
This is a total game changer. Literally.
@elitemook4234 10 ай бұрын
Remember, switching to your bayonet is always faster than reloading.
@edspace. 2 жыл бұрын
I like how the low-fi background music during the explanation also sounds like 'The British Grenadiers'
@carnyrex1872 2 жыл бұрын
It is, in fact a synthwave rendition of the British grenadiers by a guy I found on Fiver.
@edspace. 2 жыл бұрын
@@carnyrex1872 Nice, I'm not the best at picking out tunes.
@pyxl8 2 жыл бұрын
napoleonic nerf wars are a thing I'd love to see. History class would have been so fun with that.
@Aleph_Solortus 6 ай бұрын
This new custom jolt re-skin gotta be crazy
@ryanb6110 2 жыл бұрын
Why do I wish this was a thing when I was younger, now I just want to get a whole bunch of people together and just do some line battles out in a field
@ThomasRonnberg 2 жыл бұрын
absolute genius design
@dr4x3k28 2 жыл бұрын
I don't know anything about nerf or guns but LONG LIVE THE QUEEN!
@kents.2866 2 жыл бұрын
Dude if I got this as a kid I'd be overjoyed. Now you need a cartridge box to keep the darts/balls in.
@blu_wolf_ 10 ай бұрын
"I must be ready" said the minutemen
@FancyMan708 10 ай бұрын
As a 33 year old man I know what I'm getting myself for Christmas!
@masimo357 4 ай бұрын
Cant wait to get this IT LOOKS GREAT!
@zagreus2846 2 жыл бұрын
Sharpe would be proud.
Kentucky Ballistics
Рет қаралды 2,1 МЛН