New Bus Project | Will We Make Our Deadlines?

Рет қаралды 10,053

Жыл бұрын

Getting Jeet's Skoolie Conversion ready for spray foam in one months time. We had to go pick up all the sheet metal and tube steel which will give us the ability to sheet the side of the bus and install RV windows. This bus conversion is talking a while to get going but as we all know it changes quick.
🚌 Get Our EBOOK - The Buslife Guide Choosing and Buying Your Bus:
navigationnowhere.com/discover/
✅ Subscribe To Follow Our Builds and Travels: / @navigationnowhere
🤗Join Our Patreon Community to Get Extra Content: / navigationnowhere
Check Out The Entire Bus Build Series HERE:
🎥 Ivan Build Series: • Short Bus - Build Series
Similar Videos:
🎥 I Bought A Bus: • Short Bus Conversion |...
🎥 Pre-Conversion Bus Tour: • Pre Bus Conversion Tin...
🎥 3-D Design Tour of Completed Ivan Bus Build: • School Bus Conversion ...
🎥 Installing A Bus Subfloor: • Installing the SKOOLIE...
🎥 Where to Find a School Bus For Sale: • Finding Bus Conversion...
🎥 Gutting School Bus Electrical: • Will The Bus Start Now...
🎥 What to Look For When Buying a Bus: • School Bus Buying Guid...
Looking To Buy A Bus?
🚌 Check Out Our FREE Bus Buyers Checklist: navigationnowhere.com/discove...
🚌 Check Out Our FREE Bus Builders Tool Guide: navigationnowhere.com/discove...
Current Special Offers:
⚡️ 5% OFF Pioneer Mini Split Air Conditioners:
Link: bit.ly/2EieZDs
Discount Code: Navigtion5
⚡️ 5% OFF Skoolie.com:
Link: www.skoolie.com
Discount Code: Navi5
🛠️ Bus Build Products:
✅Cabinet
Pocket Jig: amzn.to/3mQdFJk
Concealed Hinge Jig: amzn.to/33Om2gN
Edge Banding: amzn.to/3otDtv1
Banding Cutter: amzn.to/3gjcT4Y
✅Water
Inlet: amzn.to/3qxoJ04
Tank: amzn.to/37AnXH2
Filter: amzn.to/2JVvzfa
Pump: amzn.to/2JQssFc
Accumulator: amzn.to/2VHCDyw
Water heater: amzn.to/3fe0Cyj
✅Electrical
Fuse Block: amzn.to/2VJNZlx
SMY Lighting: amzn.to/3n2qUa1
12v USB Outlets: amzn.to/33OyltE
Puck Lights: amzn.to/3sSJtRa
✅Demo
Socket Set: amzn.to/3mPUxLs
Scrapper: amzn.to/3mPad1j
Heat Gun: amzn.to/2VKlzrJ
Grinder: amzn.to/3mOukNb
Eraser Wheel: amzn.to/39OSBzg
✅Road Safety
Safety Triangles: amzn.to/3m0A5qJ
Good Sam Roadside Assistance: bit.ly/3fsb45i
Scan Code Reader: amzn.to/3kX0YKQ
Headlamp: amzn.to/2V6XtqZ
Pig Mats: amzn.to/3lX3y4Q
✅Exterior
LED Tail lights: amzn.to/3ev9OfM
LED Reverse Lights: amzn.to/2Cb1rJ8
Side Flood Lights: amzn.to/32p6D6G
Head Lights: amzn.to/3fZrhP1
LED Relay: amzn.to/3jdopA6
LED Marker Lights: amzn.to/3fWtr1A
Light Bar: amzn.to/32XY9Dg
📸 Follow On Instagram for More Behind The Scenes Content: / navigationnowhere
This Media And Description Above May Contains Affiliate Links. If You Click On One Of Them, Navigation Nowhere May Receive a Commission At No Additional Cost To You. Thank You For Your Support.

Пікірлер: 68

@chrlsraines Жыл бұрын

FINALLY!!! Some one is doing the windows the RIGHT way, instead of screwing or riveting in premade blanks. Like when Mike took the time to “weld” every screw/rivet hole closed but put “premade window delete inserts” in by screwing them in the empty openings! Also while I’m on it: NO ONE uses the inside rear view mirror to ACTUALLY drive with (they were never designed for driving/backing up, they were used to watch the students/passengers while driving) so why does no one ever “delete” the windows in the rear doors!?? Like Tractor Trailers and all other big trucks the inside rear view mirror is useless for driving/backing up anyways! And today we have backup camera technology anyways. . . .

@misterbojangles6205 Жыл бұрын

Yeah pal can relate fresh snow is - well - 'fresh' 'I-Ching' I Change, Change is EVERYTHING is what it is...

@airamhilton Жыл бұрын

If you’ll weld tubes through the top barrel and put a fan behind it you can distribute that heat more throughout your building.

@davidklenk5253 Жыл бұрын

Hi Mike, how about a video showing your welder and a quick intro to the welding tools, materials, and skills used to work on bus conversions?

@staceyfox9244 Жыл бұрын

I love snow ❄️ I am so excited to see this build come together- I am currently shopping for my first bus- you and your sisters and friends are an inspiration for beginners like myself.

@navigationnowhere Жыл бұрын

Jeet has his floor plan almost nailed down so once it’s spray foamed he will be framing quick.

@staceyfox9244 Жыл бұрын

I received my Navigation Nowhere sticker today- can’t wait to be able to put it on a bus of my own

@rakereldridge6210 Жыл бұрын

I don't care for snow,. That's why I moved south. I like watching it on your videos, or when my friends send me videos. I am a hot-weather person. This last year we got more than our share of HOT weather. The temperature stayed at 109. We've had 4 days of freezing temps, and February will provide enough cold days. I don't need or want anymore. I can drive a few hundred miles and find lots of snow, so I'll do that.

@kennethboatner8611 Жыл бұрын

Snow ! Nooo!!! I love my Mississippi, I’m with Dale we run from snow . Thanks for taking the time to video , I know it’s a pain , we enjoy the content!

@navigationnowhere Жыл бұрын

Haha, send all the warm weather you can spare north please

@staple_gun6367 Жыл бұрын

I'm also Mississippian. It's in the 40s right now and that's still too chilly for me.

@chrlsraines Жыл бұрын

@Mike. I love storms. Love the snow as well, just really hate the cold temps that make snow possible to begin with. My absolute favorite thing about snow is driving through it as it’s snowing. Being from the north, you know the visual effect you see through the windshield as you are driving down the road while it’s snowing.

@Aaron-P Жыл бұрын

Another project suggestion 😉 for spring, do you think a big ceiling fan above the entry door pushing down would help even out the temperature in the shop? 😎👍

@chrlsraines Жыл бұрын

Yea just put radiant heating down before you pour the concrete shop floor. You’ll never regret it after doing so!

@rekowall Жыл бұрын

Jeet! Love the bus!

@Badgeweefixstuff Жыл бұрын

Awesome job looking good 🛠️🇨🇦🛠️🇨🇦 Stove is a Cabela’s kit you supply the barrels 55 gal preferred

@navigationnowhere Жыл бұрын

Thanks for all your work getting it cleaned up and running for winter!

@sweetangelbutts Жыл бұрын

Hey, I grew up in the 'dacks! Your video made me miss home, haha

@ShadowMoonFarms Жыл бұрын

Thank you

@davidowen888 Жыл бұрын

Progress 👍☮️

@MichelleCouplandHairStudio Жыл бұрын

Merry Christmas 🎄🎁 to you all .

@iamdragonetta Жыл бұрын

Another update so soon? Woohoooo!

@navigationnowhere Жыл бұрын

Yeah I already have the next one filmed just needs to edit and post !

@pinkladybikermamma3603 Жыл бұрын

GETTING IT DONE

@williamlopez8859 Жыл бұрын

It is good to see you! Merry Christmas 🎄

@victormaggrah1251 Жыл бұрын

Best place for that box fan is on a shelf above the stove pipe.

@navigationnowhere Жыл бұрын

That’s a good idea, even if it was just up on a stool

@laruedouglas7972 Жыл бұрын

Hope you had a Merry Christmas 🎄⛄🎄

@SteampunkSteve Жыл бұрын

You gotta love having an indoor space to work in.

@navigationnowhere Жыл бұрын

It changes everything in the snow and cold up here

@SteampunkSteve Жыл бұрын

@@navigationnowhere oh I know. The years I spent at Paul Smith's had occasional bouts of me working on vehicles in the snow

@josephrolph8483 Жыл бұрын

Glad to see your back working on the bus looking forward to your next video

@ernstdh Жыл бұрын

Great video sir.

@ritabroils6190 Жыл бұрын

Lots of work for one person, keep up the good work. Hope you had a Merry Christmas 🎅 🎄 😊! Wishing you a Happy New Year for 2023!🎊🎉

@navigationnowhere Жыл бұрын

Happy new year! See you in next one

@edsteward7717 Жыл бұрын

Try backblading the snow. Less chance of digging in. Nice progress!

@georgiavanhouten9360 Жыл бұрын

Nice!

@grayeagleswolves Жыл бұрын

Hi Michael and crew hope your all safe and warm their enjoying the snow like we are in Montana great to see you merry Christmas to you and the crew and a Happy New Year the buses look great way to go

@navigationnowhere Жыл бұрын

Happy new year and merry Christmas. We are enjoying the snow now that it is all stopped for now and cleaned up off the driveway haha

@grayeagleswolves Жыл бұрын

@@navigationnowhere I'm buried up here in Mt and still digging out lol ha ha

@chrlsraines Жыл бұрын

Not trying to bust your balls Mike, but welding material to fill large holes is a fairly easy practice. Cut the price to just fit inside the whole 1/16” gap all around the material. Hold in place with strong welding magnets tax into place then weld and grind. The finished product is a flush piece of material. Instead of well what you did.

@ramblinroam Жыл бұрын

WHATS UP!!! Been a minute great to see ya Merry Christmas Happy New Year

@navigationnowhere Жыл бұрын

Merry Christmas and happy new year

@rodneybooth4069 Жыл бұрын

WTG!

@suzylewis7309 Жыл бұрын

Great update! I like snow in this way, on videos, tv and post cards! Lol. Having a severe polar plunge in NC right now with single digits and such...That's quite enough for me. Why not add some kerosene heaters in the shop to help bring the temps up a bit? Merry Christmas and a most successful New Year!!

@navigationnowhere Жыл бұрын

I thought about adding some heaters to help get it warmed up in the morning. Once it get hot it stays warm all day.

@jerrybrooks870 Жыл бұрын

@@navigationnowhere , you need to have some bigger logs to put in after you get a good bed of coals. That way you don't have to keep stoking the fire constantly. I used a barrel stove in my first woodshop ( which was an old bus by the way), and I wouldn't have to put wood in more than two or three times a day. It would also last overnight, and in the morning, I would have a nice toasty warm shop to come to.

@ronl6060 Жыл бұрын

Have you thought about using something like 3M Universal Adhesive Black - 3, 08223, High Viscosity, Gap Filling adhesive instead of welding everything. It is fast and very easy to use.

@cjg8822 Жыл бұрын

Nice job going and always tedious when it’s the same job over and over!!

@watahyahknow Жыл бұрын

you could burn some waste oil on that woodburner , its as simple as a metal drum or bucket sitting higher than the stove filled with the oil , a small ballvalve to regulate the oil feed (dripping basicly) use copper brakeline for the oil to move it to the firepart (as that doesnt burn or melt ) and basicly dril a small hole in the barrel above the fire to put the other end of the brakeline through once the fire and stove is hot enough it should burn hotter with the oil and not produce any smoke out the chimney as long as you dont pour it in like youre filling the car up after an oilchange you just need a steady drip or tiny stream , that will keep the stove from gunking up with soot too take a look on youtube for wasteoil burners , there are allso ways to burn the oil smokeless without using logs , i seen a few of them based of big propanebottles those have thick walls and can put out a LOT of heat if you can get enough waste engine oil to burn , oil from dieseltrucks would be best

@mariestrella.orquideasartecamp Жыл бұрын

Hola chicos saludos mucho frío ahí saludos desde Curazao,feliz día

@JayEmbee Жыл бұрын

So you drove all that way to pick up... Jeet's Sheets. I'll see myself out.

@chrlsraines Жыл бұрын

ALSO: like Dale said if I want to see the outside, I walk outside the bus/truck. These are converted to “living quarters” that travel (to each their own) why would you ever have all your private business available for everyone right outside to see with all the windows left in a school bus!?

@Vallyrah Жыл бұрын

How much is he selling the roof hatches for? I've been looking to buy some.

@navigationnowhere Жыл бұрын

If you are asking about the original bus hatches they were cracked and leaking so they were tossed

@FloridaHomesteading Жыл бұрын

Love love your editing. Can you name your editing program for me?? If not, PM me with the name of it!! Hey Geet🥰🥰🥰🥰

@navigationnowhere Жыл бұрын

I use premiere pro.

@deangrande7207 Жыл бұрын

Why do you take off the rub guards , I thought they would help ad rigidity to bus .

@navigationnowhere Жыл бұрын

They are not structural components. They are for impact safety for the kiddos. Structure of the bus is in the connection ribs behind the walls.

@deangrande7207 Жыл бұрын

I didn’t know that 👍

@henryashley9945 Жыл бұрын

✌️😁👍

@JaniceLalla Жыл бұрын

i am "like" #400

@roadiemort3589 Жыл бұрын

I don't care about deadlines, I'm retired, what I do care about is consistent videos from youtube channels that claim to be such, Merry Christmas.

@ginabrytowski3564 Жыл бұрын

Then start your own channel and be the KZfaqr you expect others to be. Stop being so entitled.

@moustachemike7128 Жыл бұрын

good god his bus would have been done months ago if ya spent all the time ya did yapping about it..lol//get to work slacker...

@navigationnowhere Жыл бұрын

We lost the supervisor for the winter. Not much is going to get done without him.

@alvashoemaker8536 Жыл бұрын

Aren’t you dealing with a TIME schedule?! (and, you spend SO MUCH time…TALKING…HMMmm. “OH, WELL…”. 😐😳

@Coolbreeze61 Жыл бұрын

Couldn't find you on Instagram