New Core Drill From Milwaukee Tools Makes Drilling Concrete FASTER AND SAFER check out this all new information here. Let us know your thoughts on the new Milwaukee MX FUEL concrete core drill in the comments section below!
Пікірлер: 91
@abc-pn6yi2 жыл бұрын
Omg I would love to have this thing at my job.. I've been beaten to brink of death by the core driller we have.. when I know it's my day to core drill I always hope and pray that I don't get fucked up too bad by it.. I've used the same old core driller for many years now and I kinda know what not to do with it and as long as you keep it level, vertically and horizontally and apply very little pressure it won't bind up and kick too bad.. but this thing is a game changer for real and I want one now.. I hate I even seen this because now I know that there is a better alternative than what I have to use and I'm sure that my bosses won't buy one.. if they had to core drill for a day with the one we've been using then they would go buy this right after the old core driller spun them over and broke their arm.. lol damn I really want this thing so bad now..
@saksee59492 жыл бұрын
Way to advertise your product
@MikeDayConcrete4 жыл бұрын
Looks awesome. I don't have to core drill much but next time I do, this is what I want to try.
@DK854 жыл бұрын
The perfect gift for the inmate on your Xmas list! 😜
@VCGConstruction4 жыл бұрын
🤣🤣
@nurlan17543 жыл бұрын
Hi friend. The best, easy, comfortable and safe hand core drill machine I have ever see use is Ken 6110B. I'm very hardly using it more than 4 years and I have replaced there only 2ea water o-ring seals. That'll I've done fix in it.
@erikrobles57272 жыл бұрын
I can guarantee you they built that wall with the lightest concrete they could fill in those blocks I’d like to see how this performed in the real world were you can’t avoid rebar
@joepowell76372 жыл бұрын
Not as good as a hilti guarenteed
@yourmother638 Жыл бұрын
Lol them blocks where hallowed
@alfie98764 жыл бұрын
I used a 20" in my basement for post footings. Not too many places have the spacer needed to run the 20" bit. The spacer cost like $900.
@zafaradeel21073 жыл бұрын
You can build "spacer" at only in 5dollar or less with the help of GI pipe welding to core bit ! ! !
@jesse14413 жыл бұрын
I find this new safety clutch design in these new tools to be frustrating, in the real world you would have the bit 3/4 of the way through the wall and it will start to bind and you need the drill to keep spinning to get it to move back out but the new clip just makes it do nothing
@jonathanburnside94612 жыл бұрын
Any one know a good centre bit for this drill thanks
@kingofthecrease304 жыл бұрын
CONGRATS TO VCG ON 147,000 SUBSCRIBERS !!! 👍👍
@VCGConstruction4 жыл бұрын
Thanks King of the crease!!
@trentonjackson65454 жыл бұрын
I worked for KCC and never had a drill kick on me if you know what your doing and I could drill 20-30 holes in a day 4" bit through 12" concrete
@jeremyrodriguez59234 жыл бұрын
This looks amazing! I wish my company would buy this. The one they have kicks so much , and I’ve been hit a couple times. Almost breaking my wrist. Now I’m afraid to use it.
@erikrobles57272 жыл бұрын
Kicks because you bind it up pay attention to the gap between the bit and what ever material your cutting try your best to keep it the same
@Gorillaz19442 жыл бұрын
Are you using water bro
@JonasDanish199911 ай бұрын
Burn the bloody thing..
@mjc87614 жыл бұрын
Thx for the info! Keep up the great work & for keeping it honest!
@davidlowd11464 жыл бұрын
Might want to see what Hilti has been doing in coring for like the last 10 years...
@realpatriot5896 Жыл бұрын
I had to mount the base to a concrete wall with predrilled concrete anchor holes then mounting and tightening the drill mount base before drilling with water.
@mariacarneglia84834 жыл бұрын
Happy Wednesday, VCG and the Gang! Keep up the good work!🧰⚙️🔨⚒🔧🔩🧰
@pdxlockpicker77964 жыл бұрын
Vince with the best view out of all the KZfaqrs ;)
@rebel1333frank4 жыл бұрын
You know I'm buying one
@robertacker60344 жыл бұрын
looks like her first time. your 2 years behind on osha dust less regulations on silicus dust.
@dallas53744 жыл бұрын
Union soy boy.
@cdrom10703 жыл бұрын
@@dallas5374 what is this thing i coughed up doctor?
@remilillevik96094 жыл бұрын
I would like to try this machine on Norwegian concrete , I quess one Hole, one battery !
@UptownMark2154 жыл бұрын
Daam bro I wanted to see you test this core drill out
@cdrom10703 жыл бұрын
I don't think milwakee wants their girls jiggling infront of contractors in a trade show, its not a benni bassi music video
@AntonioClaudioMichael4 жыл бұрын
Cool video Vince very informative
@atozlocksmithsf4 жыл бұрын
Hey Vince VCG and Gang! Great Channel 👍 I’ve been watching your videos... I just subscribed. Keep up the good work 🛠 🔐
@fgbtv380310 ай бұрын
Okay hut how fast can it drill a 12" deep 3" wide hole?
@M407534 жыл бұрын
I loved that Lady !! great work!!
@lowvoltagedude78374 жыл бұрын
Dude this is amazing! your the best 🙌
@noahcampbell81514 жыл бұрын
Love the channel man keep up the good work
@gentzrayamcclellan640110 ай бұрын
Works with reinforced concrete?
@bryanmcfarland9674 жыл бұрын
Hi Guys!!! Man, that is a bigggggg tool!
@hl97404 жыл бұрын
Vince you're a beast!!
@RPista4 жыл бұрын
thanks for the video! man the demo’er is huffing & puffin. psssh i would too haha
@cornfarts4 жыл бұрын
What a beast
@meagaindave20494 жыл бұрын
Jees Louise!!! 👍💯
@mrgilly1004 жыл бұрын
Would love one of these but not at £4000. Any advise on good corded core drills - I’m a heating engineer in the UK and need a good core drill for 4” flues. The Dewalt D21570K is a pile of shite. Bought one, 12 month warranty, burnt out in month 13. Milwaukee DD2-160XE - clutch not the best but has lasted a couple of years.
@trentonpage54364 жыл бұрын
Good morning
@markcreamer46494 жыл бұрын
I bought some Milwaukee cordless tools just this last black Friday, I already took everything back I'm a contractor, I was unimpressed, not enough power, corded tools are cheaper and no batteries no charger to buy, OK so what you have to run a cord, no big deal, I beginning to think all this cordless stuff is alot of hype from the companies trying to get you to buy the latest (Corded is better) !!!!!!!!!!!!!!
@nSquared754 жыл бұрын
Mark Creamer Like most things, I’d think it depends on the application. If you’re doing new construction, that may definitely be accurate as you often aren’t dealing with the space issues, as you would with finished construction. Was on the service side of things for years. For numerous reasons, cordless had the advantage.
@ssaladino19984 жыл бұрын
Your not wrong. But I don't want to drag around a cord for a drill or impact gun. The bigger tools do eat batteries like chocolate cake at fat camp.
@markcreamer46494 жыл бұрын
@@ssaladino1998 No I get it, I have a cordless impact driver & drill But I still think corded stuff is much more stronger power wise than a battery Maybe someday in the future they will be equivalent, but not yet, not even the latest mx Milwaukee, When I pull the trigger on a corded Sawzall to do demo and then do the same with a cordless, there's no comparison
@Chris-yj3es4 жыл бұрын
I've got a cordless hilti rotor hammer one battery last all day long no cords no trip breakers no pig tails wyes best investment I ever made hilti guarantees my rotor hammer has the same power as a corded one only a couple hundred more hilti guarantees my rotor hammer has the same power as the corded only 300 bucks more
@cdrom10703 жыл бұрын
@@Chris-yj3es I used a 1 1/4 drill on a milwakee 1 inch drill on a m18 system and it does drain the battery pretty quick, but its overloading the drill lol. I got a brand new bit to make one hole for a garden hose sigot, and it was just enlarging the hole.. hopefully the drill is OK. But if I install 3 spigots it will be worth it
@StrongFarms4 жыл бұрын
What store has the best deals on Milwaukee m18 batteries ?
@nurlan17543 жыл бұрын
Best hand core drill is Jen 6110B
@lorenzowalcott10522 жыл бұрын
How many hours how many hours her whole battery life
@iversonjcameron2 жыл бұрын
Nice toy....but a weka, shibuya or hilti cant be beat.....
@tiktokchallenges8182 жыл бұрын
Can you deliver it to Ethiopia.
@92kosta3 жыл бұрын
Real-life Payday: The Heist drill.
@nurlan17543 жыл бұрын
Ken 6110B
@stuntmanroy2 жыл бұрын
Put it up against a Hilti DD 500 with a 24in bit and see how well it does. LOL!
@erikrobles57272 жыл бұрын
Wtf are you talking about this is a hand held unit you would never drill a 24” hole by hand and not to mention this unit probably don’t have the power to spin a bit of that size
@csealand4 жыл бұрын
This guy is trying so hard to be edgy Fail
@jacquesdaoud42634 жыл бұрын
You know what I going to stop buying Milwaukee firs was 12v after thatthen 18v brushless
@CityJonn3 жыл бұрын
Being a concrete cutter this video makes me cringe. If you need something like this to core a hole you probably should just call a professional. But I get it this would be great for plumbers and electricians that don't know what they are doing
@xxl3adheadxx6353 жыл бұрын
I hate core drilling i do it almost every for plumbing
@husseinalrekabei31914 жыл бұрын
How much the price
@rickcolumbo31484 жыл бұрын
$2,700 for just the handheld no mast rig. $4,000 for the mast and a second battery and I don't see a vacuum pump included either.
@joetoft34282 жыл бұрын
I personally think as a Core Driller, that whole method is ridiculous. Enough power for 9 3" holes? Thats literally the first 2 hours of my job. Its much easier to anchor because its a sort of solid ground. "The hole won't move" exactly. You center and anchor it means you can't miss it. For a single hole or a large countersink. Just to be a a a-hole, she was drilling through 6 to 8 inch cinderblock with a single piece of rebar. Thats good enough to sell an idiot but not someone who is experienced. Just saying.
@ChengSAE4 жыл бұрын
Why MX? = 10volts jk... At lease keep it consistent. Come on Apple.
@rickcolumbo31484 жыл бұрын
Isn't that 1010?
@forgetaboutitwillya57023 жыл бұрын
I learned the hard way what a hammer drill can do to you if it snaps back. 3 front teeth knocked out. The pain was nothing to me. What pained me was the fact that I had a nice set of teeth. Lol Wish there was this type of technology 15 years ago. I still have my nice set of teeth. Instead , I used the macho series 2 coring a 2 inch hole for conduit. Caught some re-bar. Bye bye 3 prutty little teeth. kkkkkkk
@erikrobles57272 жыл бұрын
Wtf was your face doing so close the the rig sounds like user error to me
@forgetaboutitwillya57022 жыл бұрын
@@erikrobles5727 Young and dumb. Definitely, unsafe situation.
@ssaladino19984 жыл бұрын
She's hot Vince!
@brendanhull36872 жыл бұрын
She’s not even drilling the hole level lmao, just stop
@aaronradford18963 жыл бұрын
She drilling through soft block not reenforced concrete with rebar going through not impressed sorry!
@Chris-yj3es4 жыл бұрын
cant understand what's she saying
@rickcolumbo31484 жыл бұрын
I can.
@GuyFromJupiter3 жыл бұрын
It's almost comical seeing a woman on a ladder using a massive drill like that. It was a cool demo though.
@bramgommers68673 жыл бұрын
Most definitely not the best
@Questchaun4 жыл бұрын
Used a core drill once. Never again.
@VCGConstruction4 жыл бұрын
What happened?
@Zee20Ate4 жыл бұрын
😂😂
@derricklanders12054 жыл бұрын
I guess we'll never know!😁
@cdrom10703 жыл бұрын
@@derricklanders1205 he had to type that with his tongue
@josepeixoto37152 жыл бұрын
@@derricklanders1205 i guess he only needed that one hole