New DJI spark battery repair tips

Рет қаралды 6,437

CRUZROY Helicopters

Жыл бұрын

New DJI spark battery repair tips
in video i keep saying 5 amps, i ment to say .5 amps or 1/2 amp sorry

Пікірлер: 24

@bobzybob1 11 ай бұрын

Thank You very much for your time and energy. Very apprecitated and very impressive work that you are doing here. Rob from Quebec City, Canada.

@seanpat217 10 күн бұрын

Hey CruzRoy! Cool video. I’m having the hibernation problem with my spark batteries. I can’t find the battery killer software. Can you provide a link or point me in the right direction please? I opened one of my batteries and was able to get 2.8 voltages across the cells, but it still won’t charge. I guess I need to reset the bus! Thanks, PS. Did you say not to leave the battery on the charger because it will drain the voltage if it is not charging?

@CRUZROYHelicopters 9 күн бұрын

drive.google.com/file/d/1F-hjFhaPGixog1-4q2XkKmVmcSnppLZo/view?pli=1

@marthacintron3578 Ай бұрын

Good stuff.. Can you show me how you connected the alligator clips to the htrc

@raybrogdon387 12 күн бұрын

What is your charge (cost) to repair DJI Spark batteries ? How do I contact you ?

@MissingLink369 20 күн бұрын

i just took out my spark and wanted to use it the batteries have 2 does they look like they charging but the spark charger does not light up red like yours did?

@snarkmark2806 11 ай бұрын

CruzRoy - Immitated, but never duplicated.

@stuweo6399 2 ай бұрын

any chance you would share the stl for the 3d printed jig ?

@BenjaminMedlock 4 ай бұрын

I would like to send in my batteries. Please let me know how to get them to you.

@eggydown 10 ай бұрын

Thank you... I bought a like new spark knowing all 4 batteries are flashing the 2 green 4 times when charging. Purchased 4 new batteries but will waiting a month to get them. I have been researching repairing the others. From what I got off micro sd card in drone. It has been close to 2 years since flown. Do you think there is a chance to revive batteries? Also I have a DC power supply variable: 30V 5A adjustable. Will that work with CP2112 board.

@CRUZROYHelicopters 10 ай бұрын

i repair for 30 a piece, you pay shipping both ways, if they dont come back to life, you dont pay...yes 2 years, dont keep trying to charge DJI software works in reverse if you do, it will deplete the lipos till they are dead

@eggydown 10 ай бұрын

Thank you. I appreciate the offer to fix them. You are in the states? I am in Canada. If i decide to ship them to you and get them fixed. I then pay shipping and 30 US each after to get them back. I have 4 new ones coming in 2-3 weeks.

@vincentfreeman2593 5 ай бұрын

@@CRUZROYHelicopters hey i have two that need fixed how can i get them to you?

@shaunfoster5 3 ай бұрын

@@CRUZROYHelicopters I have same issue with two Spark batteries. Are you still doing these types of repairs? If so, do you have email address for contact to arrange?

@dcippitelli 2 ай бұрын

@@CRUZROYHelicopters Hey there, I just stumbled on your channel/video. I have 4 dead spark batteries that I cannot recover. I purchased a CP2112 Debug Board and bench power supply pushing steady 10v, but all four batteries will not allow me to read info, I get the same error on all 4 packs "Could not perform SMBus read 0x00". Do you think my CP2112 is bad or do you think all 4 are really dead? Before all this, I originally left them on charge overnight because, at that time, I thought that it was best to try first.

@MrPenguinsfan66 3 ай бұрын

What is the replacement battery inside?

@SaneLucas 11 ай бұрын

I have this issue how or from who do i get them fixed

@simonb252 11 ай бұрын

i opened 4 of these and there was no glue? different type?

@veryconfusing 5 ай бұрын

Tons of good info and no -BS- . I Cracked open a spark battery that was dead for grins and . .. yeah no way does it "Pop right open". Most of the videos seem to have already taken it apart at least once already. Mild heat and a steel spudger barely got me in without damaging the casing and it still broke a few of the tabs. Did you happen to post your 3D printed Jig anywhere ? That would be really useful !

@CRUZROYHelicopters 5 ай бұрын

yes i made jig, pro it works to charge dead batteries a cell at a time to at least 3.0 v ...con leaves holes and you still have to reset BMS