Watch the original install video of WISH front splitter here: • the ST gets Front, Sid... Link for front splitter from wish www.wish.com/p... Link for splitter rods from wish www.wish.com/p...
Пікірлер: 94
@contactpq2 жыл бұрын
I bought an inexpensive EBAY chin spoiler for my 2008 Benz E350 with the AMG Sport Package...I watched a lot of install videos and finally came across yours ... your process made the most sense to me so I went with it your way... the installation was super easy and measuring everything before drilling holes had me lined up just perfect...thanks for sharing your work methods with us
@16minimonster164 жыл бұрын
I ordered that exact front splitter and I have been looking and looking to see how to install it on my car and finally I see it plus you walked through the splitter install! This video got my thumbs up because it was exactly what I was looking for! Looks amazing can’t wait to do mine here in the coming days!
@asifahmad25512 жыл бұрын
Yesterday, i saw ur tapping screw installation video, and went down with hardware and same splitter, but unfortunately while jacking i had a sprain on my back nd now m on bed watching ur nut nd bolt system that too i had in my pocket, what a coincidence, God too wanted me too wait for a day.... 😃
@anvoyage892 жыл бұрын
lol, it's amazing that I watched the 1st video then come this one :)). But, this shows the importance of securing the front lip while at high speed.! Great video, thanks mate
@slosubies48452 жыл бұрын
Thanks for the update. I was debating whether to go the easy route and use just self-tapping screws, or do it right with fender washers and bolts with self-locking nuts. I don't think I'll be doing any 125mph runs in my Impreza Sport, but it looks like it's worth the extra effort to get it on there securely as possible.
@LordRahl743 жыл бұрын
It's best to always use 3m adhesive as well.
@DriveWayRay3 жыл бұрын
Going to follow this as a gospel guide you nailed it. Mine turned up today for my mk2 focus ST but I’m gonna wait and order some splitter rods 👍👍👍👍👍👍
@carloslewis84484 жыл бұрын
Use double sided tape to assist your bolts or screws it help with keeping it fastened and firm
@Pkdimmock3 жыл бұрын
Can you explain a little more please? Do you mean to use tape on parts that are not fixed to assist and attach the whole splitter?
@franchise-pj6ow2 жыл бұрын
Crazy bro I lost mine at the same speed. I'm so glad it didn't cause any damage to the under carriage ! Well besides mangling one of my exhaust tips no other damage occured.
@hectorc33533 жыл бұрын
Looks good man keep it up i got the same splitter for my challenger, this is my second time ordering it, currently waiting for it.
@jcruz01434 жыл бұрын
Looks very nice, me I would put the rods more to the side \ /, it would look more aggressive.
@yetticuda4 жыл бұрын
Great video. About to install this one myself. Was given to me with no hardware so should be fun.
@dirtylollistorewonderpark54824 жыл бұрын
Thanks alot for the Vid bro, I was contemplating getting the mounting Rods, but now I see how important they are in keeping the front lip in place.🙏🏽
@JordanMoree4 жыл бұрын
💯 %
@TalencioJamaican3 жыл бұрын
7:17 your dance move is FLAWLESS
@ej5376 Жыл бұрын
Lost mine at 166 in model 3 performance, but I can’t use mounts. I’ve had for fiesta St’s. One which had 350bhp, the most fun car ever created, a smaller version of the focus ST! 😍😍 Pretty stuck tbh haha. On my route home it’s one of those roads where you can go flat out without many cars for like 18 miles and there’s a barrier separating the opposite direction, so my only real danger is a dear, a blow out or a cop 😂
@cre8tivegarage1574 жыл бұрын
Keep the great vibes coming, we watching from Las Vegas
@garydeandeery4 жыл бұрын
Ha ha Iv seen a few come off now I fitted mine few years ago in between the splash guard with the tie rods. Done few track days and been fine so far. I did cut a slot into the guard to help with pressure
@salvatorespalato350310 ай бұрын
Sweeeeet video bro and sweet whip too
@bimmerheadzept9154 жыл бұрын
great videos...lost mine at 80mph...i suggest liquid nails or a good plastic caulking, and big washers.
@robertdippolito1993 жыл бұрын
I don’t trust this splitter to stay on at high speeds, I’m returning it
@bimmerheadzept9153 жыл бұрын
I've had it on for a year now..no problems, i just used a lot of screws and washers.
@GarrettBoyd10304 жыл бұрын
Just ordered mine! Definitely won’t be hitting 125 MPH in my car but it’s mainly for looks and so I can add some rods as well! Wondering if this will 100% fit on my 2002 Mitsubishi Eclipse 👀👀
@JordanMoree4 жыл бұрын
It should. It’s 3 pieces so it’s universal. Just measure measure and measure
@dizzykillteam3 жыл бұрын
Thanks for the update, a must have
@user-qs2xs3us2x Жыл бұрын
I thought the side pieces always went BENEATH the center piece.
@kennethrollerson48983 жыл бұрын
Can’t wait for mine to come in!!
@4099cal3 жыл бұрын
It looks great 👍...thanks gave me an idea 💡 on how to put it on thank you
@zurivazquez82773 жыл бұрын
I believe your supposed to put the middle piece over the side pieces
@EscapePlanSkateboarding3 жыл бұрын
How is it holding up this time around??
@JordanMoree3 жыл бұрын
No issues after this.
@EscapePlanSkateboarding3 жыл бұрын
@MOREE GARAGE Awesome, I'm going to pick one up 👌
@Ris3nPropheT Жыл бұрын
Looks great. I bought these same splitter for my MK3 RS. But I don't like the idea of drilling through my front bumper to install those rods. I'll have to use L shape brackets to hold it in place from behind the bumber unto the top metal piece.
@drakolassboyy49664 жыл бұрын
It looks perfect 👌
@JordanMoree4 жыл бұрын
thanks I was pretty stoked on it
@hanielbomb3 жыл бұрын
Damn knew it. I watched and we talked on you previously video. That’s man.
@bruhmoment3352 жыл бұрын
from 5:37-5:53 i noticed that your zip-ties for the license plate were not the same! i know you like your symmetry brother!
@NagasakkiSI Жыл бұрын
80mph equals about 300lbs of downforce...so 125mph... If these are functional splitters, the rods have to be bolted to chassis not the bumper. Just daily driving it may hold up, but the splitter flying off is not the problem... that 300-500lb of downforce will rip your whole bumper off instead.
@ALFA_813 Жыл бұрын
People always ask why i don’t buy a real carbon splitter and I just say this is my third one lol
@CarPEDiemas4 жыл бұрын
Thanks I think I need to add some real screws and washers as well on mine also then I hade 145mph and it still there but maybe better to secure it up :-D
@syihanyasan62202 жыл бұрын
How about we pour epoxy in the lining in side to make it EXTRA hard so it's serve it's purpose.......
@garydeandeery4 жыл бұрын
What do you think. Skirts be on soon
@taximan79123 жыл бұрын
You should have used double-sided tape too
@toddcalrow41244 жыл бұрын
try adding some 3m tape dude
@unwrapthrills4 жыл бұрын
Woulda like to see exactly how you actually connect the top section of the rods. Did you drill holes in the car?
@JordanMoree4 жыл бұрын
Yeah I know. It took a long time measuring out to make sure they were even and I just didn’t film it. But yes drilled a hole for each on the bumper
@seandon56492 жыл бұрын
Where did you get those headlights
@omarpelaes88384 жыл бұрын
Any update about your front splitter ? Still on place ?.... I lost mine when I was driving about 80 miles
@JordanMoree4 жыл бұрын
It’s solid now. Haven’t gotten back up to 125. It’s few and far between that go fast. I just like building. But with the bolts and rods in place it has no wiggle at all. But definitely take the time and throw the self tappers away that it comes with. Someone else mentioned using riv nuts which would probably make a cleaner install and add the same security.
@omarpelaes88384 жыл бұрын
@@JordanMoree what size are your rods ? And how much did you pay for them ?
@JordanMoree4 жыл бұрын
Omar Pelaez here’s the link to buy them. I went with the larger size 150mm. www.wish.com/product/599fef13e7dd6c0a50e3a0e0?share=mobileweb
@dannyboyp884 жыл бұрын
Hi. You think those will look nice on a yukon truck?
@lsjionredlinesupercharged20493 жыл бұрын
Looks Great 👍
@chriztoph3rhammer7503 жыл бұрын
How come you never explain the measurements
@dham994 жыл бұрын
i have the Rally Innovations aluminum 3pc front (and rears)..uses heavy grade bolts..no flex or issues. That plastic looks like it can get pretty flexible at speed! Looks good though..nice job! What part of TX? Im in Converse (SA) ^_^
@JordanMoree4 жыл бұрын
Dallas
@dham994 жыл бұрын
@@JordanMoree right on... much better car scene up there than here in San Antonio.
@fishingstix6102 ай бұрын
Lmao you ain't going 125 on the back roads you hit a curb or something there's rash marks on the oem bumper 😅😂😂
@DreamBicycles3 жыл бұрын
The second time. Nice.
@thekingishere18313 жыл бұрын
The pound for pound
@blitzed37444 жыл бұрын
Did it come off yet?? Looking to get one but seen your first one come off so kinda scared to get this one.
@JordanMoree4 жыл бұрын
Nope. It’s solid now👍🏼
@robertdippolito1993 жыл бұрын
Why not take away the rubber spacers. I took them out to sit more flush
@JordanMoree3 жыл бұрын
The rubber spacers are meant to keep the splitter straight and inline. The focus bumper is not flat on the bottom so without them you would be bending the plastic upward in the middle if they weren’t there.
@erwinlevasier3 жыл бұрын
Looking good, were did you order the rods?
@JordanMoree3 жыл бұрын
They were cheap rods on wish. You can get them on Amazon too
@GarrettBoyd10304 жыл бұрын
Where did you purchase the front splitter rods from?
@JordanMoree4 жыл бұрын
Ordered those from wish also. Cheap but they work.
@darrylpolite87222 жыл бұрын
Does it come with the spacers?
@JordanMoree2 жыл бұрын
I ordered two of them and they both came with spacers however other people have commented theirs did not.
@cameeiwebb9354 жыл бұрын
I did the same steps on your other video &&- unfortunately my sh* came off on the freeway 😂😂 i installed the second one, i. Didnt use splitter rods, i did however use rivet gun &&- added bolts &&- nut 💪💪 now i can fly without worrying my bootleg lipkit 😂😂
What size screws did you use for mounting this? And how has it held up since reinstalling?
@JordanMoree3 жыл бұрын
Bob Holland I really do not remember. I just went to home depot and bought some I felt were big enough and drilled the holes. Has held up to 140 mph so far. I honestly don’t try to go too fast anymore. Just had a little boy and he needs his daddy😉. Good luck with the install. Also the rods aren’t everyone’s style but they def work to hold it in place also!
@affordablelonnie88674 жыл бұрын
Hey @MoreeGarage I think we should link up man I'm Dallas . I made some Mods on my 2017 Chevrolet Sonic LT I think it will a great video. I ordered the same 3pc front splitter in my flew off when I was driving down highway I was mad but quickly ordered another one but I just got a 2pc front splitter
@JordanMoree4 жыл бұрын
Affordable Lonnie you have Facebook? I’ll look you up. I’m always down to meet local car guys.
@affordablelonnie88674 жыл бұрын
Lonnie Jackson My facebook
@lawmanlawreaper3 жыл бұрын
Lucky you did not take anything from under the car out or another car driver, very lucky
@JordanMoree3 жыл бұрын
H LaWMaN H I have a special spot where no one is. I’m almost 34. I don’t endanger those around me. Can’t say I’ve always been that way but you live and learn. But yes very lucky something didn’t get taken out under the car.
@lawmanlawreaper3 жыл бұрын
@@JordanMoree Nice Man stay safe
@poppinfresh52613 жыл бұрын
My car doesn’t even like to go 70 so I am perfectly fine
@AlexVorasane3 жыл бұрын
Yo, you're in Texas, want to do my lexus for some content? Lol
@JordanMoree3 жыл бұрын
I’ve got an 8 month old now. I barely have the time for my own car anymore😢
@AlexVorasane3 жыл бұрын
@@JordanMoree I put mine on 2 days ago, went on the highway and half of it flew off and broke. Lol whats the best way to secure these things?
@AlexVorasane3 жыл бұрын
@@JordanMoree has these ones flown off yet? Lol
@JordanMoree3 жыл бұрын
@@AlexVorasane youve gotta use bolts and nuts….or rivnuts…or something other than the self tapping screws. The rods help tremendously too!
@afteroffice_yt3 жыл бұрын
👍
@thenoobletlego3 жыл бұрын
lmao at 125MPH? Sureeeee.
@MartinR-zz4li3 жыл бұрын
I wanted one but pretty sure now I’ll lose one at 140🤣
@JordanMoree3 жыл бұрын
Since installing the nuts bolts and rods I’ve had it over 140 with no issues
@MrKerl054 жыл бұрын
Omg thx ...! I Send this shit back. Before i install this crap.