Thanks Bob , that is really nice feedback

Hi , we highly recommend to use the cameras recommended for this to work an give accurate results, technically you can use a standard camera but it wont have the optimisation to get the best results so wouldn’t recommend

@@DVSLTD but it can work?

@@fabrizziodemarini I don't think so...

Search is as long as video is there on HDD

So you could specify the search range to be, say, from the date of the very first video to even today, the date of the last video? Would that not take a long time?

@@DVSLTD Dauhua could do search way far back as well but each search is limited to just a range of 7 days. Example, Jan 1st 2020 to Jan 7th 2020.

Yes using with the ANPR camera 😊

you can use any camera technically but we recommend at least the G2 acusense also as this can be set for face capture event 😊

Hi Eddy , generally its fast , but there are times it takes a little longer, I am awaiting a firmware to see if we can improve this across the general performance , also its down the settings on the camera a lot , as I have tweaked the settings on the FR camera to output in a specific way , we do have people use them for access control but as we have dedicated FR access control terminals which are fast , fitted at the right height and place , this will perform a lot better

Yes you can upload images to this

Hi Alex , we plan on doing webinars for open questions as well as planned tech walk through’s , regards the Question , we can support direct POE from the NVR or adding via the LAN port, to add a camera via the LAN port you simply go into the camera menu, and change the relevant POE port on the NVR from Plug&play to manual , then input the IP address of the camera you want to add ( must match the LAN IP address range) then username and password and it will connect that way , you can also turn the POE function off on the latest NVR GUI and on the I series it will make the POE port a switch port as there is only 1 LAN port so still segregating the traffic if that makes sense, that method you still manually add the camera as above but the IP address range would be that of the internal port range IE 192.168.254.x by default. Hope this makes sense?

@@DVSLTD thanks very much.

@@compasspoolsuk You're welcome

Hi , thanks , currently it’s a 16ch /32ch NVR with POE and not 8ch

Hi , it actually will work with any camera, BUT if you use the camera that supports face capture the results are better to be honest and faster , and you have more adjustment and optimisation , so I would always use a camera with that function but it’s not technically essential , I hope this helps 😊

Cameras with Face capture or face detection its supported u mean?

@@ahmedfarhoudah4312 Technically any camera but they perform better with a camera with facial capture built in 😊

Hi! Just curious, what do you use facial recog. tech for?

Hi , thanks for the feedback , the X NVR can do Face recognition OR perimeter protection and has better performance against the older face Rec NVRS , and as we do it now in this 77 series the older Face Rec units where 9000 series ,so it will also be a cost attracted offering , I will try to do a video of course 😊

@dvsltd, what’s the difference between 7700 v 9600?

Hi Lloyd, sadly not , these have hardware GPU built in whereas the I series standard does not 😊

the IDS model perform very well , and the G2 Acusense model with the VCA engine turned to face detection 😊

We are unable to sell outside the UK :~(

Technically any camera can , I wouldn’t recommend it as its not optimised for this function

@@DVSLTD Many thanks, I understand it's not an optimal camera. Can the intercom use the NVR Poe switch or will it need its own?

No but we have an IDS camera that does have that function , IDS-2CD8426G0/B-I www.hikvision.com/mtsc/uploads/product/accessory/iDS-2CD8426G0'B-I_(B)-20180711_draft.pdf

Hi , the big video wall is 86” , if you mean the one on the POD its 22” 😊

@@DVSLTDhi mate what make and model is that 86" screen?

Hi Sofia, yes we have 2 IVMS-4200 how to videos on the channel , there on there if you cant find them let us know 😊

Found them! Thanks!

@@hellosofy Thanks for watching!

Rut 4 48

we don’t give pricing out sorry and sadly not able to ship to the US

what is camera model recomaneded(not deepmind cameras) to be used with this NVR

Hi, this is the new IDS-7716NI-I4/16P/X model NVR 😊

thank you for your reply but i want to knwo what is the camera model to be used with this nvr to get a good result.

@@AhmadAhmad-sh8pl Hi , technically any but we recommend the 7 line models as it has the face capture option for optimum performance like DS-2CD7126G0-IZS

@@DVSLTD thank you for your support .

Hi , the new 77 X version is the cost effective solution, I’m not sure on AUD pricing sadly but I know sons of the hik guys I can put you in touch with to help if needed ?