New Hull Shake Down Blackjack 42 Castle Creations HYDRA, Stock Motor

No video

New Hull Shake Down Blackjack 42 Castle Creations HYDRA, Stock Motor

Рет қаралды 6,767

Күн бұрын

New Hull Shake Down Blackjack 42, Castle Creations Hydra, Stock Motor
GET BOAT HERE BJ 42
CASTLE HYDRA XLX2
www.avantlink....
CASTLE CREATIONS 8MM BULLET
www.offshoreel...
6.5 POLARIZED CASTLE CREATIONS CONNECTOR
www.avantlink....
OSE Q8 CONNECTORS
www.offshoreel...
POWER HD SERVO
www.offshoreel...
SMC 6300MAH 4S 135C
www.smc-racing...
SPEKTRUM 5000 100C 4S G2
www.horizonhob...
SPEKTRUM S2200 LIPO CHARGER
www.avantlink....
DX5 RUGGED
www.avantlink....
DYNIMITE MARINE GREASE
www.avantlink....
SPEKTRUM BATTERY'S
www.avantlink....
DYNIMITE GPS
www.avantlink....
Thanks for watching ironclad rc tinker test and tune everything rc
Personal contact information ironcladedout@gmail.com ⁰

Пікірлер: 91

@nwirc Жыл бұрын

Now that's a clean build. Runs great for being semi tuned.

@bigpoppapaulsradiocontroll2724 Жыл бұрын

Just got my 42 today and gotta say all because of you big B had a spartan for a long time but after watching Ironclad I had to get one it's absolutely awesome thanks for the awesome Content and all tips I've been picking up from you I will be putting into practice 👍

@IRONCLADRC Жыл бұрын

Right on! Good luck with your 42 build its one of my favorite proboat models

@bigpoppapaulsradiocontroll2724 Жыл бұрын

@@IRONCLADRC yeah it's awesome man sitting still in dis belief the size of it 😂😂👍 your 106mph vid blew me away if I get round 80s after figure it out I will be over the moon what you think is a good prop for that?

@Pauly_______ 11 ай бұрын

I just recently got my hands on a 42. (Rescue mission) new rudder and a oxidean 4814 prop on the way. Originals were destroyed. 9000mah 4s and charger all for $500. Anxious to get it together

@robbomber984 Жыл бұрын

BOO! Hope I didnt scare ya, tricks havs got no treats , hope ya feel better almost went with my pops he went down to Wilmington NC to see my daughter and grand babies well youngest is about 15 oldest 18 wow I feel old now. Peace.

@davidfranklin4721 8 ай бұрын

I really want to put the xl2 in all my single boats and that hydra x 8s on the twins!

@scottpokallus6857 Жыл бұрын

Just got my XLX2 hydra today! Running a 46 mm 1.7 3 blade. My 42 takes a beating due to the lake is very choppy. Can't wait to see how she runs with the Hudra

@IRONCLADRC Жыл бұрын

It's gonna be alot more responsive, temps should be lower and faster all the way around. Good luck

@jaymeparker27 Жыл бұрын

Sweet build big b! The hydra is a power house!

@cybereye2 Жыл бұрын

That’s ur 100mph setup big b. I’m really looking forward to seeing you achieve that milestone 😊😊

@marxboatworx Жыл бұрын

Man thanks for the great effort to get out there when your family has been sick and you’re not the best!! Hope everyone is on the mend! Good seeing the new hull run. The sponsons seem to be doing different things to each other..seems the blue print job on the old hull fixed it..hows the levels/dips underneath on the new hull?? Great video.. that Hydra running all that weight just on the prop when the whole kit it out of the water is just insane!!👍🏻

@IRONCLADRC Жыл бұрын

The whole family has been under the weather all week flu and strepthroat, I had to get out the house I'd been playing doctor dad, until the doctor got SICK! I really want to see what I can do with the stock hull knowing what I know now. Maybe 80mph? Hopeful thinking anyways.

@frankmonthomery9570 Жыл бұрын

Great video B Man that Hydra has a punch can't wait for the speed spot run ....

@IRONCLADRC Жыл бұрын

You and me both!

@pr3254 Жыл бұрын

Feel better bro!

@detroitrcwurks998 Жыл бұрын

Grunt say the least. Love my mmx8s and xlx2 esc’s. Castle nailed 1 outta the park on those 4sure!

@denilpt6792 Жыл бұрын

Bro make an outrigger rc with that same setup 💥💥💥

@elvispresley2328 Жыл бұрын

great video as always, its nice to get a new hull and start from scratch, cant wait to see what you do to it, hope you and your family feel better ,take care big b

@IRONCLADRC Жыл бұрын

Thanks brother, my daughter and I are the last to get it. My wife and sons had Strip throat and the flu, I was busy last week play doctor dad.

@kh40yr Жыл бұрын

Rig some feeler gauges to slip inbetween the ruler and tip of trim tab. adjust turnbuckle till the gap closes, use the same gauge on the other side. No guessing on height or adjustment that way. Should be dead even,,for a baseline or whatever. fender washers make good feeler gauges. Can even get different thickness parallel ground washers,,for more precision.

@jmscard Жыл бұрын

looks good, FYI you should have a larger gap between your prop hub and the strut as I see literally no gap (yikes). In use under load the flexshaft "shrinks". Under load the shrinking will cause binding. Your temp issue could be from the motor working excessively hard under load as the prop hub is rubbing on the strut. Rule of thumb is always leave a gap the width of the flexshaft to allow for the flex shrinkage under load. so 1/4" flex meanes 1/4" gap should be left.

@IRONCLADRC Жыл бұрын

I would think there isn't that much constriction on a 1/4 HD flex cable so I don't leave that much gap. .98 .130 4mm .150 cables have a lot of shrinkage. I'm running a 1/4 HD upgraded cable on my bj42. HEAVY-DUTY CABLE.

@jmscard Жыл бұрын

@@IRONCLADRC Totally understand the logic but actually the larger 1/4" flexes do constrict more then the smaller flexes do. Obviously the shorter the flex also the less it can constrict but yours definitely in the vid looks much to close like hardly any gap at all. Just a suggestion as I learned the hard way burning up a $650 Schulze copper board 40/160 esc (holy grail of marine esc's) years ago running to little of gap causing my prop hub to nearly weld to the strut lol. Great Vids btw and happy 2023!

@treyrahman Жыл бұрын

The beast is BACK !!! CONGRATS !!!are you using stock servo and reciever for the boat ? Ive heard people upgrade those on faster boats.

@IRONCLADRC Жыл бұрын

Using a dx5 rugged with a standard sized 45kg servo

@georgegonzalez9281 Жыл бұрын

Feel better Big b! 260 degrees is a high fever, maybe you need some water cooling! Happy Halloween to the boat gang.

@IRONCLADRC Жыл бұрын

Thanks for the laugh, I needed that 🤣

@55steviegreene Жыл бұрын

Happy Halloween Big . Hope your feel better

@IRONCLADRC Жыл бұрын

Thanks brother.

@nealstarling5422 Жыл бұрын

First things first, get well soon Big B, you and your family IOP. Did I miss something? What happened to your old 42? I bet you used it all up, I know how that is I am not kind to my boat hulls. I wiped out my BJ24 at over 60mph and lost my hatch and gps but thanks to you and your strong suggestion to add flotation I was able to get her back. You know what to do now maybe 100+ is in your future. BG4L

@IRONCLADRC Жыл бұрын

Yea I cracked my old hull at the speed run spot. Lucky. Glad you were able to retrieve your hatch

@norcalrc Жыл бұрын

New hull build out looks great. Happy 🎃bro

@IRONCLADRC Жыл бұрын

Thanks, Happy Halloween bro.

@NevskiyVladislav 3 ай бұрын

Ситуация понятная: неправильная развесовка. И дейдвуды надо отрегулировать - опустить винты ниже.

@Buellerwtfman Жыл бұрын

I would be interested in seeing the same exact prop and electronics set up as on the last runs before it ate itself. Just to see how close you could get the numbers before moding the hull and swapping things. The cardinal rule in speed, if you change more than one thing at a time you really dont know where it went right or wrong.

@jaycevessier7554 Жыл бұрын

That’s exactly what I want to see myself. No blueprint but do everything else. I want to see how much it actually helps

@cyclonerc1625 Жыл бұрын

🎃 Happy Halloween Big B & fam. Go Boatgang 🤘👍💯✌

@VetteWay2Fast Жыл бұрын

Glad to see the new hull back in action and that esc seems to work great, lots of punch. What prop are u running this outing? Seems to perform well with no cavitation and good top speed. I’ve only been able to get near 70 with the 50mm 3 blade but it cavitates likes crazy until it catches. This one appears to get the same speed with no cavitation

@jaycevessier7554 Жыл бұрын

See we run our tabs flat with bottom of sponson. Also with that prop all stock electronics it should be running 71-72 mph, that’s what both me and my neighbors do all stock

@IRONCLADRC Жыл бұрын

Dude I literally just finished it's a fresh build. Fresh.

@jaycevessier7554 Жыл бұрын

@@IRONCLADRC oh no I’m not giving you shit, just giving you a little info on how my boat runs with a stock hull. Don’t be so quick to jump bud, I’m just having a convo with ya buck

@IRONCLADRC Жыл бұрын

I know you weren't giving me a hard time brother.

@jaycevessier7554 Жыл бұрын

@@IRONCLADRC ok cool, seemed like it was taken wrong

@paintendaveextremecollisio8057 Жыл бұрын

Great Video man hope you feel better 👍 any thoughts on your Moter temp getting hot?

@IRONCLADRC Жыл бұрын

I think my motor temp was hot because of the hard bashing I was doing on that last set of packs.

@Livlifetaistdeth Жыл бұрын

Is the single prop giving you torque twist? Either way that is a beast!

@danielik1055 Жыл бұрын

Keep up the good work man! I enjoy watching your vids! I hope you do a tp engine in the blackjack soon🤤 Why don't you actually have a Miss Geico 36"?

@IRONCLADRC Жыл бұрын

Thanks for the support brother, I've gotta get the new hull tuned in soon as I feel confident I'll throw the tp motor in

@wally6629 11 ай бұрын

Big B, what are those "Collars on the Water Lines Connections"? ... there not Zip-Ties. They make for a CLEAN Look. Please let us know, THANKS

@IRONCLADRC 11 ай бұрын

It's silicone line, same silicone line as the cooling line, I cut a small piece and stretch it on to the main cooling line with pliers. Works great and looks good 👍

@Mr.Blackhatt Жыл бұрын

owyeahhh great vid...nice BigB! 👍🏾😎 she rips with that Hydra woussiee! 😮😮😮 btw are you gonna blueprint the bottom on her...? just curious here😋

@IRONCLADRC Жыл бұрын

Blueprint? More than likely! I'm gonna see what I can do with the stock hull first.

@Mr.Blackhatt Жыл бұрын

@@IRONCLADRC nice!!! can't wait for the next vid! Goodluck😁

@jamesatkinson7517 Жыл бұрын

Might be camera angle but that strut is down at the rear by the look of it, not 90 degrees to the transom, pushing the nose on the water. My ten cents worth

@matthewwilken2051 Жыл бұрын

ive noticed many people running there strut real l,ow down like that with way to much angle one way or another.especially for speed or saw runs im not sure why as this puts so much more load on the motor. i think they think the boat will stay down better. i run mine completely opposite as close to the surface as possible.....

@IRONCLADRC Жыл бұрын

I was getting my 89 mph with a low and angled strut

@milantomer65 2 ай бұрын

which engine from Castle could be used in that boat?

@peteroosterhoff8850 Жыл бұрын

Did you have trimtabs on your old bj? I tested today x8s in my mono2 (oxodian) where normally T180 is in. Did gain speed but it wassen't because of esc. Btw, esc ran without any cooling and didn't even get 40'C!!! so t180 will be reinstalled. BUT... the reason i gained speed was... Bending trimtabs up, so they don't work. It was a tip from a racer, he said a boat should run without them unless there is something wrong with c.g./hull/setup for instance.... Good to see bj runs again...

@IRONCLADRC Жыл бұрын

Yes sir I had trim tabs on the old hull. I originally didn't want to run trim tabs but this boat needs them some kinda bad. I don't think a catamaran should need trim tabs, unless like you said it's got hooks or dips in the ride Surface

@peteroosterhoff8850 Жыл бұрын

@@IRONCLADRC Ok, didn't remember. Not that they seamed to be a problem on old bj, but since youre after speed i thought ; it's worth mentioning. If you ask me, forget al the fuss and blueprint the bj and put tp in and go for your pb...! But i also get it's nice to see how you graduatly work to that and we can learn from it. Keep em comming and happy halloween

@roxannakennedy3897 5 ай бұрын

Hey big B was wondering if you have gotten on Castle link for xlx2 have you changed timing on stock motor if so Wat was best setting you found? I got mine set at 12 deg , haven't tested yet.

@IRONCLADRC 5 ай бұрын

I ran mine around 9-12°

@milantomer65 3 ай бұрын

Hello, what is the difference between Spektrum smart and Castle hydra xlx2?

@IRONCLADRC 3 ай бұрын

Spektrum has the smart technology that gives you telemetry real time with Spektrum lipos and transmitter.. castle has more power capabilities, Hydra can handle ove 400-450+amps where the 160 firma is 160a constant, not sure if it has a burst current?

@dwanecrow3622 Жыл бұрын

Very cool.what’s your thoughts on the TFL-1420mm Genesis step hull Cat W/Twin 5684/1000 KB motor 300 a ESC?

@IRONCLADRC Жыл бұрын

Nice boat, she's big, almost need a trailer to haul that bad boy around 😆

@Soshstar999 Жыл бұрын

Almost makes you wonder when someone is going to add servos to the trim plates and tilt controls of the boat, i wonder if that would change anything

@IRONCLADRC Жыл бұрын

Ose has a power trim tab option for larger hulls I think arrow shark offers a servo adjustable trim tab

@Soshstar999 Жыл бұрын

@IRONCLADRC it probably wouldn't be that hard to set up on any boat, and could probably even use a gyro on the trim tabs to keep the boat nice and stable

@johnverdin6600 Жыл бұрын

What size and kind of motor you have in it

@oliverwhite30 Жыл бұрын

Hey Big B. Please tell me what you did to upgrade your stuffing tube rubber grommet. Yours looks different. My rubber grommet is lifted up on the underside of the boat and is leaking water into the boat on its maiden run. What’s your thoughts on epoxy on the rubber grommet underneath the boat?

@IRONCLADRC Жыл бұрын

I used thin CA super glue around the stuffing tube and around the hull hole cutout

@oliverwhite30 Жыл бұрын

@@IRONCLADRC Many thanks. I love your quick reply.

@buhayofwsaitaly7051 Жыл бұрын

Sir pls try esc kraken flycolor 180a plsss wait

@stevejackson3564 Жыл бұрын

What is the black container that covers the collet for.

@marxboatworx Жыл бұрын

Grease catcher so it doesnt flick grease coming out of stuffing tube all over inside of a clean hull👍🏻

@juliacorpe363 Жыл бұрын

What brushless system would you recommend for a stealth wave 23 ?? I’m just getting into electric boats

@matthewwilken2051 Жыл бұрын

2200kv at least 36-40mm can]

@juliacorpe363 Жыл бұрын

@@matthewwilken2051 3660 3800kv 4 pol be ok ? ??

@michaelveld9413 Жыл бұрын

would you test the proboat impulse 32 for os greets from nl mike

@IRONCLADRC Жыл бұрын

Next year More than likely

@michaelveld9413 Жыл бұрын

@@IRONCLADRC impulse 32 have de same esc like the blackjack 42 6s boat whit 8s esc

@casconie Жыл бұрын

you don't sound right big B. get well & be safe big B.

@IRONCLADRC Жыл бұрын

I've got the flu. Thanks

@chevy4life203 Жыл бұрын

There you go saying "last pass again"

@IRONCLADRC Жыл бұрын

Famous last words 😆

@matthewwilken2051 Жыл бұрын

i worked with a lot of the castle escs 10- 15 years ago. there weren't many other hv esc options available back then.. i know from experience buying a ztw 200a esc it wasn't worth it compared a 150a esc price. so 300a would be a must if trying to go up .. i've been going the opposite direction making my set ups lighter with smaller motors way over tuned. these expensive larger set ups just haven't really been worth the extra money , and have disappointed me almost every time. i hope the hydra works out for yas. kzfaq.info/get/bejne/rZqTmpZ20KecqWw.html

@IRONCLADRC Жыл бұрын

It depends on which hull your throwing the bigger esc's in. My little 24 blackjack I'm running a 90a esc I've tried a 150 in that boat and the lighter weight esc lower amp rating gives me the best speed. To be honest the only reason I got the HYDRA is to share my experiences, it's a new speed control for the rc boat world theres only a hand full of channels that review rc boat parts and upgrades so I kinda felt obligated.. the speed control has been out for 2 weeks now and unfortunately I'm literally the only guy running the hydra on youtube... I bought the 200 ztw so I can basically compare the 2 speed cotrols and there output and performance.