New Ikea PAX Wardrobe with sliding doors Tutorial Part:2

Рет қаралды 63,320

Жыл бұрын

New Ikea PAX Wardrobe with sliding doors Tutorial Part:2. Learn how to easily assemble your new IKEA PAX wardrobe sliding doors in this step-by-step tutorial. We will guide you through the process with clear instructions and helpful tips to make sure your PAX wardrobe is set up perfectly. From attaching the tracks to installing the doors, we've got you covered. Joining IKEA PAX wardrobe frames together is a crucial step in creating a larger storage solution. The frames can be joined side-by-side. The top and bottom rails play an important role in the stability and functionality of your PAX wardrobe sliding doors. The top rail provides a guide for the doors to slide on and helps ensure they open and close smoothly. The bottom rail acts as a support for the doors and helps keep them in place when opening and closing. It's important to make sure these rails are securely attached to the wardrobe frame, so your PAX doors operate properly. In this video, we'll show you the proper techniques for installing the top and bottom rails and ensure your PAX wardrobe has a seamless and long-lasting performance.
New Ikea PAX Wardrobe with sliding doors Assembly Instructions Part : 1
• New Ikea PAX Wardrobe ...
New Ikea PAX Wardrobe with sliding doors Assembly Tutorial Part:3
• New Ikea PAX Wardrobe ...
How to build IKEA PAX WARDROBE assembly upright
• IKEA PAX WARDROBE asse...
• IKEA PAX WARDROBE ASSE...
If you like to support my channel:
Viewers can purchase a Super Thanks on a video to show their appreciation, and then post a colourful comment. Thank you ;)
/ ppflatpack
Thank you for your support.
**Tools I'm using **
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.
www.amazon.co.uk/shop/ppflatpack
Music:
Epidemic Sound
www.epidemicsound.com/referra...
Some of the links above are affiliate links, where I receive a small commission if you click on the link and purchase an item. There is no extra cost to you but it helps me a lot. You don't have to do so, but it does help fund these videos that I hope to bring value to you.
Here is my stuff :
www.ppflatpack.co.uk
ppflatpack@gmail.com
/ ppflatpacklo. .
/ ppflatpacklo. .
/ ppflatpack
/ ppflatpack

Пікірлер: 44

@jergervasi3331 9 ай бұрын

Thank you for your terrific videos!

@drjohnny03 Ай бұрын

Loved the video. It helped me speed through the Installation process and I didn't even need the book!

@spocket7 6 ай бұрын

Very instructive and useful video series; Question: Why didn't you use the dedicated joining screws the first time around? Why using just the regular screws on the front before adding the top and bottom rails, and later on go with the joining screws? I would have thought it was better to secure it once and for all at the beginning? Wondering if there was a reason behind this.

@jazzbeats8168 3 ай бұрын

super detailed thank you!

@WOOForNOT Жыл бұрын

Super supported vids. Thanx!!!

@Pathfinder_tua Жыл бұрын

Great timing coz I just bought this sliding door pax and gonna build it today or tomorrow.

@PPFlatPack Жыл бұрын

Let me know how it goes. Thank you for watching

@Pathfinder_tua Жыл бұрын

Do I need the drill bit that u use at 7:47 mins? Or are the holes already there?

@deniseignatowski5302 3 ай бұрын

My only issue is I have 4 smaller (narrower) units instead of 2 larger units. I had to tap both my upper and lower brackets on with a rubber mallet and they cut slightly into the wood. It could be that the bracket middle three openings need to be a bit wider to accommodate differences between the two assemblies. I did notice a hairline gap at the top of one unit that could have caused this in one side but not both sides. Anyhow your instructions are highly detailed and appreciated…especially the closeups.

@deluxdg Ай бұрын

No mention of drill bit size

@pantje Жыл бұрын

Does the wood color of malmbed go together with the wood color of the pax cabinet? You're an expert, I'd like to hear it...

@PPFlatPack Жыл бұрын

Sorry not sure if these two colours are identical if im you I would go to ikea before buy and check sometime there is different shades to the final finish even they look similar. If they different I would go with white. Consider colour of the walls carpet or flour colour and colour of existing furniture, size of the room etc.

@boredomreliever3850 Жыл бұрын

Are these all predrilled holes? Can I use a screwdriver or do I need a drill? Other than attaching the wardrobe frames to each other

@PPFlatPack Жыл бұрын

All holes are predrilled apart for the holes for joining screws. You can use manual screwdriver if you want to work hard ;)

@user-us6mw3tu3f 7 ай бұрын

Does anyone know the size of a single panel used for the 78 3/4x79 1/8" Sized PAX, which will use the 39 3/8x79 1/8" panels? I just need the size of one panel not all 4

@ellenmorgan5555 8 ай бұрын

We are trying to build this at the moment but our top rail does not align in the middle. We have a very minute lip at the top for some reason and cannot get the top rail on now matter what we are trying! Any suggestions before we try and sand it down and ruin the wardrobe?!

@paulbetts4684 3 ай бұрын

Hi, did you sort this issue? Having the same problem

@tatjanad7670 2 ай бұрын

I did all as explained but bottom of sliding doors cannot click it's too short. I don't know how this is possible.

@mariepatrick1219 Жыл бұрын

I have secured the bottom rail with no problems, however, I can't get the top rail on at all. It does not push in far enough to line up with the screw holes amd I cannot bang it in like you have shown in the video.

@ellenmorgan5555 8 ай бұрын

@mariepatrick1219 We are having the same issue! Did you ever find a solution!?

@kkrrus7983 7 ай бұрын

I have the same problem

@kkrrus7983 7 ай бұрын

I cut the metal of in the part it was stuck with a knife took me like 5 hours

@martinellimunshi2622 7 ай бұрын

Omd, I am having the same issue, its so frustrating!!

@seventhsense34 Жыл бұрын

Hello, I would be glad if you answer my question, that's so important for me. I have 3.10 meters ceiling, so I want to buy a pax wardrobe with 236 cm length. However, there is a natural gas pipe passing over the wall. So, I only have 234 cm. Because of 2 cm, what should I do? Can I cut down the bottom of the wardrobe, can I open the sliding doors, then? Or should I cut down the back of the wardrobe and insert the pipes into the wardrobe?

@PPFlatPack Жыл бұрын

Hard to say can't see how the pipe is going. If you have older Ikea Pax Wardrobe (previous model) than yes 2cm is fine to cut from the bottom (doit only if you know what you doing) here is it how is done kzfaq.info/get/bejne/m86HrMWDqsjIdmg.html If you have the new one I don't know there is the new bottom rail never did with that one.

@seventhsense34 Жыл бұрын

@@PPFlatPack Thank you so much for your reply.

@jiggely_spears Жыл бұрын

Hi - are these two 100cm frames or 75s?

@PPFlatPack Жыл бұрын

75cm

@mlcarv Жыл бұрын

IKEA screws are so bad. Do you ever replace them with better quality screws or is it just user error?

@PPFlatPack Жыл бұрын

I think Ikea screws are fine never have problem with then so far

@petersellers7155 Жыл бұрын

Your edit seems to have missed a huge part of the assembly, you put the rails on top and bottom then next segment there are the metal sides on too but no idea how you attached them? Please tell me as I need this part thanks

@chrisstaub5880 Жыл бұрын

Those will probably be covered in the Part 3 video.

@PPFlatPack Жыл бұрын

I usually do the side covering panels after I do the doors and you can see it in the Part:3 (coming this Saturday 8am)

@petersellers7155 Жыл бұрын

@@PPFlatPack ok thanks

@user-gn4tu3sz2n 7 ай бұрын

sir where u put the hole u donot show in camera we are confused

@mariyamaltaf2654 Жыл бұрын

How we can istall soft close in these new model?

@PPFlatPack Жыл бұрын

Soft closing in the new model is already installed in the bottom rail

@monapatel3078 Жыл бұрын

Part 3 link ? I cant find part 3 video

@PPFlatPack Жыл бұрын

Part 3 kzfaq.info/get/bejne/h8yDq7eGzLOUqas.html

@jazzbeats8168 3 ай бұрын

the top rail won't fit into the frame panels its too thick....

@paulbetts4684 3 ай бұрын

I’m having the same issue!

@aminbham1318 12 күн бұрын

I had the same issue.. Then realised the door has a wheel and a little plastic clip under the wheel.. The clip goes under the rail and the wheel on top - i hooked the door on with the clip in the rail which raised it too high. 😅 Hopefully your issue wasn't more serious than mine

@jazzbeats8168 11 күн бұрын

@@paulbetts4684 yeh I think it’s manufacturing issue where it just too tight , use a stop block like timber strip . Hold it flat against the rails and use a hammer to just jam it in.

@jazzbeats8168 11 күн бұрын

@@aminbham1318 think we are referring to different issue