On the second axle, you have the lifting blocks off 1/4 turn

That tire grabber equipment is a time-saver. Really neat jack and tire carrier. Makes me wish my dad and I had one when I was younger to get the duals on and off our tractors.

That certainly adds a "safety first" dimension to your work. The jacks work best with "extra" people. It is impressive. Thank you for sharing. 😊

Like the jack. Looks very safe. The tire carrier is working well also. Lots safer 😊

I certainly agree with you that the up & down buttons on the remote need to be swapped around to make more operational sense

Looks like a time and back saver! Thanks Mike appreciate your time

Mike if you chain the suspension up so it can extend your spring the high lift jacks will lift them high enough in one stroke. Change all 4 in about 45 minutes.

That is an incredibly cool pair of tools for doing big tires like that!

😏 Bro you got your jack top turned 90 degrees and not locked onto the Beam otherwise I love it! God Bless 16:13 ❤️🖖🏼🇺🇸

Universal Jack stand 😮

You put the cup thing on the jack around the wrong way on the rear

Does it save time, yes. is it well built, yes. is it reliable, yes. is it easy to use, yes. is it safe, yes. is it easy to maintain and operate, yes. To me, seems like a good piece of equipment to have. I like it.

FYI, That's the same hydraulic setup on that jack as used by many many dump trailer manufacturers.

I like that👍👍. Maybe put a small solor panel on the jack to keep the battery charged ( like they do on campers), just a thought. Nice unit for sure👍👍👍

That is the cats meow

I suppose you could put tabs on the jack so you have it perfectly center on forks and line it up with an A-B line in a front loader tractor. 😁

Awesome looking jack Mike

Get reflective tape and put on the outside of the jack stand to keep them on the outside of the jack stands for working in the dark. This will make sure all of the parts are in place and outside of the machine. Maybe show this to the company. That’s a really strong piece of equipment to be able to use.

Man, that jack system is GREAT!

Mike, love it can you get the manufacturer to put powered wheels to move the jack with the remote like your conveyor. The jack should be self-leveling as well. Thx

That 9380 is sweet ! “Big red “ on side note best case sprayer jack is just that little one you can easily wheel around and lift each wheel super simple and slick.

looks like that jack and grabber would pair with a tele-handler or tele-skid nicely.

Retractable caster wheels would be awesome on this. Especially with off road tires.

Great video Mike

Like the jack system, SO much safer. Especially the two glamorous assistants !!!!!

Jack looks like a good fit to the operation

On our deere We use the plate that you bolt under the fender. We change to floaters to do fall applications on wheat and take off just before we do fungicide on wheat and start over the top on summer crops.

Looking at the new equipment, fir the safety factor alone it seems like it would be worth the expense. Unless it's $50K. But with the amount of equipment you have, seems kike a timesaver and safer for your employees. I agree with you about the switch. I'd have to rewire it.

Nice machine. Love the locks. Looks so much safe than usual methods.

Add a small solar panel to keep the battery topped up. A Canadian tire sale should do it..

I hauled many many many of those sprayers from one side of the country to the other and back again. I wish everyone had those three tools….

Hi Mike love your stuff keep going

its purty expensive jack ,but when you have 5 or 6 sprayers its justifiable to own when you switch tires twice ever year.

That’s not really a con though mike you would have a skid steer for charging wheels most or all of the time anyway grabbing a set of forks too for mobile operations isn’t a imposition if your already transporting the replacement tires and a skid steer I do agree though the controller should be wired the other way but that’s as simple as splitting the case and moving some wires/buttons My biggest con is that top rail should have locking pins on the end and especially since your pushing and pulling tires a con to both deer and case both sets of lifts are dumb I’d rather see a set of lifting forks like a heavy wrecker for lifting semi axles especially if your not selling this as a on concrete only wall power unit for mobile use I don’t like the precision nature of the case jacks or the lack of any meaningful captive hold on the deer set if you need to do a infield change on dirt

Ol safety first camp

Looks nice! I never thought about this problem, but it seems really shady to lift it on a single jack being that tall. Cool thing about this jack is that you could always modify or make new attachments to fit however you´d like! You could also make shorter ones, so you don´t have to remove them between the axles. Would make it a little harder to put them on the wrong way.

Pretty cool machine.👍🤙

Handy bits of kit!

Well I'll tell you right now it's very nice and sturdy and you can do 2 with one lift but the lining up part is a draw back

I reckon an improvement they could make is to have those teeth on the interfaces you put on work both directions so people don't do a mike and put them on the wrong way!

Handy a jack like that.👍

There needs to be a laser linerupper thingy and also have the circular hard points on the sprayer 'talking' to the jack spigots for accuracy. Currently there is too much jockying around with the sprayer for the capture.

That's pretty slick.

I'm no expert but you are correct, you didn't have them on correct 😂. God bless you all.

On the second lift. You put the Jack heads on wrong !!😊

Nice 👍

I'd put a couple of solid wheel burrow wheels on an axle & a couple of handle (ie; make it into a trolley) or buy a trolley similar & weld onto it or for moving it around

Hello Mike 👍💪😉🇮🇹

Look like it works great

Good time saver since you have 4 sprayers.

If that jack had retractable bigger wheels so you could just wheel it around or tow it behind a quad for field work it would be great instead of having to use a machine with forks

Looks way safer then the widow maker jack. Your other jack is about as safe as a jackall.

I only have 1 concern... It looks to assist in changing air up tires... Looking at the height of the the tires and the gap from the jack to the frame, the jack wouldn't fit under the tractor with a flat tire... I think it's strictly a shop jack to change inflated tires. Which is OK, because that's what I think it's intended. With that being said, great for that..

Always read the comic book instructions

If you chain your suspension on each wheel you don’t have to lift as high. Like the videos keep it up

Having the tips of the jack mounted off centere on a rotating disc would allow you to adjust it better to where it needs to be without having to manhandle the jack.

right equipments make life easier and safer ...

Cracking vidio and great lump of kit makes job lot easier.... But here in the UK its a big NO NO going underneath anything jacked up and seeing the sprayer moving while you were underneath it wow, Mike think you would get your arse kicked by the boss here. Still get vidio

Safety number one priority.

Seems like a male/female conical engagement set would be preferable. The simple pipe setup justs seems "cheap" and not conducive to easy mating. // The fact that the clips weren't engaged on the beam for the second lift makes for a form of unstable equilibrium. A lot safer to make sure the clips engage the beam flange.

I think you might be getting a visit from someone at O.S.H.A. about that hook up when doing the rear tires.

Mike if you wrap a chain from the top of the suspension spring around to the bottom of the trailing arm, when you jack or or lift the wheel you won’t have to jack it nearly as high. Keeps the spring from expanding as you lift that wheel. Keeps the machine more level and stable. I could send you a picture if you’d like. We borrowed a jack very similar to that that a farmer had made. He put wheels on it for moving it into the exact spot we needed it in. Worked very well.

Morning

Why isn't that tire grabber off center? So de driver can see the wheelstub. I really like your videos. Greetings a dutch dairy farmer

The patriot suspension really doesnt let you lift the sprayer straight, its a horrible setup and very dangerous. That jack isnt perfect but does a very good job, wish I had one.

That's the Fact " JACK " 😂

get the tire grabber guy to put a small tapered end in the pipe that would help line it up

Прикольная штука. Как бы при установке колеса, резьбу со шпилек не слизало.

Brian is never not chewing gum

Likely find many other things that it’s efficient for

Its fairly easy for a heavy-fingered mechanic to grossly over-tighten stuff when using a bare impact wrench, weakening and damaging the studs. Impacts are mainly for removing fasteners, not for final tightening. You should get a torque-limiting impact extension (sized for your equipment and impact wrench) they're pretty cheap as far as tools go, basically just a steel bar of certain diameter and length that acts as a torsion spring.

Does that Case machine have disc brakes and big callipers. CRayzeee!!

🔥sweet jack setup mike, works great 🔥👊🔥🔨⚙️🏍🚜

The Jack and the Tire Grabber are built in the shop where I work.

🇨🇦👋😁

hydraulic pump and reservoir mike

i think when you did the back you put the slider things that go on the top on sideways😂

Hi Jack! I'm SuBBaSS.

If it works, was it really a bad idea?

its the cats meow

Mike, I have a question. What's the difference between a tyre and a wheel? 😜

The times you both put the tops on for the rear axle you put them on the wrong way so they were not foxed onto the rail. As if you did that on purpose??? Haha.

Seems like Brian enjoys gum. What is Brian’s favourite kind of gum?

Does this jack only work on sprayers?

A man with your skill and knowledge should be able to design a trailer that you could mount that jack on. . able to tow it behind a pickup or service truck to the field so you could use it where ever. You already have a self contained hydraulic system. Maybe a few hoses, ball valves and you could raise and lower the transport wheels and hitch hydraulically. Bet you or one of your mechanics vould design and weld it together.

new drawbar or weldup for Big Red ?? Just saying - looks like a liability lawyers dream to be able to put the lifting blocks on "unhooked"

Probably should be used on concrete floor in shop or concrete pad outsidd. Safety First You have lifting blocks on wrong doing rear wheels

New channel sponsor?

Don't know the price, but with a fleet or more then 1 sprayer I honest think it's a good investment, because as we all know safety 3rd.

Looks like a WRC rally car on steroids 😹😹

Wear a head mounted GoPro

How much you pay for 710s

I love when english speaking people say that english is hard 😂

Magnifique relevage pour automoteur pour le roues😮😊😢

The hydraulic cylinders should have pilot valves and steel pipes. It wouldn't be good if a hose were to burst while the locks are disengaged.

Why don’t you mark Jack’s so the same distance as the whole time you put it on? You know that we will it is in position. Is

You have the controls upside down. All the wiring should be at the bottom. I guess your In Canada lol

Over complicated tire changing