Man I just dig quality tools although I didn't need them at the time of purchase. It just feels good to know that I have them when needed.

Very happy with this. I never use 11/32 in my line of work but 9/16 I’ll use daily.

Just got the first item you reviewed! Thx some Lowes stores in St Louis Missouri does not stock them yet’ love your videos

A great video brother. Klein has really stepped their fame up. Oh yeahhh.

Best tool review ever,🎉 great job

Yeah I’m getting this for sure. I’m gonna pair it up with my Wera I already have and I’ll be set.

I thought the impact multibit screwdriver they release recently was great, but this 20 in 1 is on another level.

This is definitely gonna replace my 11 in 1. Being an electrician, this is a must-have!

I like that they attempted to improve the flaws of the previous design. For hvac the 1st gen sizes are more applicable because condensor fan motors mount with 11/32 hex nuts. But it didnt work because it requires a hollow shaft to tighten all the way down. Because of this, I will be switching to the gen 2 with 9/16 paired with a hollow shaft 11/32 nut driver.

Man I hope they make this in metric

7:51 My guess: Klein removed the longer taper [and moved to a stepped design] primarily so the socket has a lesser chance of getting bound up on surrounding obstacles. Imagine you're driving a fastener into a countersunk hole. The further in you drive it (with the old long taper design), the more likely you are to bind the outside wall of the socket on the countersunk "obstacle." The stepped design-and the thinner wall-gives you the lowest profile possible, letting you fit in the tightest spots. Amazing attention to detail both by Klein, and you for pointing out that change. Great video!

I just bought the old 14 in 1, since it's on sale at Home Depot. I really need to keep up with videos on here, because I would have bought this new 20 in 1 and then pick up the new set with the 9/16th. I picked up the old 14 in 1 and the stubby for $26, so I could get just the 2 sets of sockets and be set. I really do like the new divider in this new handle though. Since I am always needing different bits, since I do a little bit of everything, I can get the 20 in 1 and change the bits. Then I won't need to bring my case of bits everywhere. The Klein that's on sale is the one that doesn't have the flip socket on the end, in case anyone is interested. This 20 in 1 blows mine out of the water though. Thanks for the video. I might start shopping at Lowes more now. I am starting to not like how they are pushing brands out. I like Milwaukee tools but I like having different brands of stuff and I buy what I like from each brand. Home Depot probably going to be a 2nd store to shop at for me, like how Ace, Menards and Lowes have been for years. I really miss the old Craftsman tools though, and shopping at Sears for tools as a kid. Seeing new tools makes me think about the old Sears shopping trips with my Dad. I am glad that I experienced that, even though by the time I got older and really was able to work on stuff, Sears was on the decline and now they are gone. These sets of nut drivers are going to lighten my load on jobs, and I am going to get both, even if I decide not to get the new handle. It would be nice to have 1 handle with 1 size setup and the other with another size. I can use the bit driver only handle from the older 1 I have for the screws I come across. I think this will speed up my jobs. Thank you so much.

Haha... I was just about to buy the 32933G and found they now make the 32934. Its the exact same thing, but includes an extra 5/8 & 3/4 bit for an additional cost of $10 over the 32933G. Klein has been on a roll lately.

9/16 is much handier to me. I just bought the old version a month ago. Wish I had known about this one. I didn't actually even need the handle. I use it mainly in my Veto TP3 alongside my 11 in one impact; I can just snap it in that one if I need a handle on it. Purpose of that bag is to be as light as possible for walking around with.

I have had a carousel design Klein tools screwdriver and the carousel did not work was hard to pull out of the base of the screwdriver. I returned it and got a 10 in 1

the reason i prefer to carry the 7-1 with the 9/16 and the 14-1 rather than the combined 20-1 is because the 20-1 doesn't have the shaft length adjustment that the 14-1 has. but i would like the have the improved carousel that holds the bits better. do you know if you can adjust the length of the driver if you put the old shaft on the new 20-1 handle? thanks

They have another version of this too that goes up to 3/4"!!!!

i couldnt figure out why the ballast needed a 9 mm. and everything else was standard. i guess thats what the 11/32 is for

Anyone has idea where can I find a replace parts of the missing nuts driver? I lost my 1/2+16/9 bit.

Somehow all my bits on my stubby carasel fell down inside handle so i pretty much have to break it to get bits out lol

what if one of the sockets will brake? do you have to buy whole new tool??

My magnet broke first time using it I can’t say I recommend the old model.

Sucks they cut out the 11/32 because it comes in handy for hvac. 8/32 nuts on motors.

Where did you find the flip socket set as a standalone without the handle? I can’t seem to find it anywhere.

Where’s the metric version Klein, I have an almost exclusive Klein tool set and I hate having lots of different brands. I have a full insulated screwdriver set, I also have the 11 in 1, the 4 in 1 stubby and the 4 in 1 precision . I’ve been waiting for the new ModBox rolling tool cases to hit the UK, why are you dragging your feet supplying Europe. In addition to the above screwdrivers I have the slotted screw holding set, side cutters, 2 pointed pliers, combination pliers, water pump pliers, wire strippers, tape measure, hacksaw, junior hacksaw, USB tester, multimeter, magnetiser and many more, I’m a serious tool buyer but I feel I’m being driven away, either Wiha, Wera or Milwaukee will benefit from your loss. Now I’ve ordered 3 Milwaukee nut drivers because I couldn’t get Klein metric versions, and, as my 11 in 1 has some snapped bits and I couldn’t get the replacements I know you sell, I’m going to order the same versions from Milwaukee too. I’m now looking at the Milwaukee Packout tool cases, come on Klein, what the hell are you playing at…………….

Good idea but the bit falls of many times

They have a 9 in 1 now that adds 5/8 and 3/4.

why would they do away with the 11/32 is it not needed or common in the electical world anymore or is 9/16 just a more common size then the 11/32?

anyone know where I can get this in Canada?

cet outil existe t il en version metrique ?

Am i the only one wondering if klein just hates the metric system? I am still yet to find the metric version to go with it.

Where did you get that ice pick?

I have the chrome one that's non impact because it's made in the US. All the others? China.

Isn’t the one with a ratchet better?

Damn they don't make this in metric

I need the hollow nut drivers for 3/8" locknuts on the ceiling fans braces. This tool is useless tome and I bought a few of these pieces of junk!

If Home Depot loose ridgid plumbing stuff , their loosing me with it

It's not "IMPACT" rated. The magnet will fall out within less than 200 fasteners. Happened on Both sizes from the package. Stick with MALCO.

Malco nut setter is better

If you tell me one set comes with something the other sets don't you do not have to pick up the other set shvoe them in the camera to prove it. I don't have all day to listen to you say "uhm" over and over.