New MAKITA IMPACT XPS Driver Bits DO THE IMPOSSIBLE! (best ever made)

Рет қаралды 283,766

Күн бұрын

New MAKITA IMPACT XPS Driver Bits DO THE IMPOSSIBLE! (best ever made) In this video we show the #verycoolgang some brand new Makita impact XPS driver bits that are being released today! These new impact driver bits from Makita come in a bunch of different sizes and cover standard driving bits like : torx, Phillips, slotted, Robertson, and hexagonal. We open the 60 piece E-01644 impact bit set that comes with nut drivers and 2'' extension bits with a removable magnetic tip. These new impact driver bits from Makita do the impossible by supporting the weight of the impact driver and battery! Could these driver bits be the best ever made from Makita? Let us know your thoughts down below.

Пікірлер: 481

@E.IS.M.I.A. 4 жыл бұрын

Well guess who is going to buy more bits that I don’t need

@Parangwheat 4 жыл бұрын

lol well it's just so tight in the tool box look at it.

@super6baker910 4 жыл бұрын

Same

@guidao221 4 жыл бұрын

I use the best bit, which is produced in Japan.

@guidao221 4 жыл бұрын

Gene I use all Japanese tools.

@johnsayman2271 4 жыл бұрын

Always lookin for bits, 15 different sets, and always need the only one missing

@josephmalinowski6817 4 жыл бұрын

By the way just wanted to say thank you my aunt happened to be over my house a few hours ago and I showed her last night's video and the part where you mentioned my grandfather being a pilot in World War II but he was my hero and it basically almost brought tears to our eyes just wanted to say thank you and my aunt my father's sister obviously we're so happy to hear that

@SweeturKraut 4 жыл бұрын

When he hung the driver on that long bit... I decided to go get the set.

@lukie4ever 4 жыл бұрын

The bosch impact bits can do that as well

@haroon420 4 жыл бұрын

Lukie4ever Bass I want to get the Bosch impact driver so I can share batteries with my drill and jigsaw but I will get the makita bit set as the video just blew me away!

@cfkn7049 2 ай бұрын

@@lukie4ever Makita Impact XPS bits are Nickel coated, so they don't rust, while Bosch's are just black phosphated. If you work outdoors...

@starboard9551 3 жыл бұрын

This set is the answer to their old gold bits that were under-sized and cammed out constantly, almost like they were for a different screw standard. This set is for exact US specs now. Very impressive, I'm super happy with my set I've been using for a few months now.

@meagaindave2049 4 жыл бұрын

One word: MAKITA! 😎👍

@Aepek 4 жыл бұрын

Like the new bits so far; & really like the way the bits come out of case easily....even if wearing gloves. So far, happy, & hope will continue to stay that way w/ these bits. Cheers✌🏼

@j.juarez9526 4 жыл бұрын

Makita is high class and high quality!

@royalmac1011 4 жыл бұрын

@donkey ass reviews and do's same still have two corded drills from the 80's, will still out power anything out there!!

@VacMaster1991 3 жыл бұрын

I bought these because in the past I have stripped and broken many bits and screws using impact drivers or high power drills in diy projects. These are truly incredible.

@ecojoe2214 4 жыл бұрын

Pretty impressive. Never seen anything quite like that before. Good job Makita.

@Rinconmaniac 4 жыл бұрын

As a Canadian, thank you for calling the square driver bits Robertson. 👍👍

@noebuentello6192 4 жыл бұрын

I probably have 20+ bit cases of different brands but now I need just one more

@mikeytrippz9453 3 жыл бұрын

dude, I love your personality it makes these videos that much better! I don't know how you didn't mess up not one of those screws when you aggressively onto the 2 x 4 you're a beast!

@grandpadre8811 4 жыл бұрын

That stuff at the end is AMAZING! When my Dewalt bits are spent, I'm buying these.

@captbill279 4 жыл бұрын

Excellent presentation of an excellent driver/bit set. Cracked me up when Vince just stopped talking.... you know it must be good if Vince just up and stops talking. It was so dramatic. hahhaa

@skycorrigan6511 4 жыл бұрын

Just picked these up! Amazing set. Priced right as well

@troygtge8179 4 жыл бұрын

Bought them few hours ago and the 6 inch adapter actually got what u got in video and was thinking wish Vince had a video on the bits and bam here it is live the channel

@craigyarmulasr1845 4 жыл бұрын

I'm glad I found your channel. Great stuff. The Project Farm channel did a test on multiple sets of driver bits.

@micahvanbruggen8954 4 жыл бұрын

I'm gunna have to check these out. Been a big fan of their gold tips.

@grantbeeson5830 4 жыл бұрын

The T25 bits do grip really well. Thank you for the video!

@user-qg6fy4yp8t 4 жыл бұрын

Good video!!! Great singer, with deep and wide voice qualities!!! That's why you have got the great show on web - great technical info, great humour, great vocal capabilities...

@edwinleal8716 4 жыл бұрын

I bought these today had a good feeling they were quality. Now I watch this and it confirms my intuition. Good stuff man. Keep up the good vids.

@ahmedjaafar689 2 жыл бұрын

How did they hold up ? How many you broke already?

@rafaelmarin1963 4 жыл бұрын

So nice to see a quality bit, quality tool, quality operator in one video. Just a really good presentation of a really good tool.

@Rafa25260 4 жыл бұрын

Rafael Marin tocayo

@VCGConstruction 4 жыл бұрын

Thanks Rafael, we appreciate it!

@UncleIvan1 4 жыл бұрын

just got these couple weeks ago, use it with my bosch impact and I love it

@n8t350 4 жыл бұрын

Awesome.....its about time😀😀😀thanks for all your vids.

@someguy8523 4 жыл бұрын

@VCG CONSTRUCTION Another awesome video thank you for all the info and knowledge

@familyLTD 4 жыл бұрын

Wow! Love this review! Thank you.

@SwifterSnail92 4 жыл бұрын

Love the Makita 3in ph2's I leave them on a high powered magnet for about a week and they stay magnetized

@TonyandDylan 4 жыл бұрын

I was freaking out after the extension held on the threads of that screw. Great job Makita and VCG.

@hepe2808 3 жыл бұрын

I love your videos 🙏 keep it up, thanks a million!

@amunra4117 4 жыл бұрын

Man i love your reviews and content need that set

@donniemccrorie19 4 жыл бұрын

Glad I didn't stock up on the gold bits while they were on clearance. Thx for the review!

@VCGConstruction 4 жыл бұрын

Thanks Donnie!

@jakerogers6562 4 жыл бұрын

#2 grabber bits are my all time favorite. Never had a bit that works that well.

@VCGConstruction 4 жыл бұрын

Thanks for the feedback cuz!

@squarebodySpringman 4 жыл бұрын

wow i know what im trying next. Thanks for sharing!

@duncdunc76 4 жыл бұрын

NIIIICE! Gotta say I love the Makita Mag Boost bit adapter, have like 11 of them. But I will say after extensive use when your switching bits back and forth the adapter loosens up a bit and I sometimes pull the older adapters off of the bit when removing the bit from the impact driver. Looks like the new ball bearing bit adapter from Makita might solve that problem. Kinda looks like a Dewalt one I have thats been out for a while. Just hope its as magnetic as the mag boost. One of my fav things to do with the mag boost is to dip my boosted #2 bit into my pouch of screws and let the magnetic power of the mag boost pull a nice amount of screws out that I can grab off the bit so I dont have to dig my hand into my pouch poking my fingertips.

@PracticallySquared1 4 жыл бұрын

Almost bought these today, guess I’ll be going back to Home Depot tomorrow morning for some bits.

@williamarrowsmiith8380 4 жыл бұрын

These bits will make an excellent addition to my XDT16 18V!!! Great video.

@farikomike524 4 жыл бұрын

I wish I could get half as excited about anything as this guy gets about everything 😁 Love the energy man.......never stop 👍🏻

@barrydingle8409 2 жыл бұрын

Have you tried cocaine?

@lcook0825 3 жыл бұрын

I just ordered the kit. They look like the best out there now for sure.

@DarthYazzie 4 жыл бұрын

Me and my brother were just talking about bits the other day. 16gauge flat strap killing our bits. Glad I saw this.

@VCGConstruction 4 жыл бұрын

Sometimes you just can’t help having to pre-drill

@DarthYazzie 4 жыл бұрын

@@VCGConstruction that sounds chill, but my boss would bitch me out for predrilling haha.

@erickeith6591 4 жыл бұрын

after seeing how well the bit stayed in the screws im thinking I'll give them a try and compare them to the max fit.

@Fee.1 4 жыл бұрын

TheVdog12 and you’re talking about what? Max fit?

@stevenwilliams6638 4 жыл бұрын

Wow I'm impressed! I know Makita makes quality products, but these bits are on another level.

@8bitsamurai6 2 жыл бұрын

Yea they make some of the best if not the best imo. Only just to have have more bits I bought another kit after my first one several years ago. They are extremely durable as well.

@mariacarneglia8483 4 жыл бұрын

Hope you guys are having a good evening! Great Video ! Keep up the good work! 🤙🧰🤙

@vanontheloose211 3 жыл бұрын

I bought that set and I’ve been impressed

@dustinkjersem7395 4 жыл бұрын

Heck yeah Vince! Bad to the bone channel for builders!!!!

@louisdellanno5801 4 жыл бұрын

I’m impressed!!!

@Illetirres 4 жыл бұрын

I have to confess. The first time I came across one of your videos, I thought “this guy is loud and obnoxious” and I went away. Then every so often I’d come across another, and yeah still the same guy. Thing is, I kept coming back. That loud, obnoxious guy who I normally wouldn’t watch was actually really knowledgeable, entertaining and yes, still loud, obnoxious and I really enjoyed his content! As a homeowner/DIY/amateur woodworker I find so much value in your channel. Keep up the great work and keep being you! Subbed and notifications on!

@bobdoingstuff4180 4 жыл бұрын

Bro! So glad I went with makita! Make that last frame the thumbnail haha that's crazy its holding that driver up

@georgebonney90 4 жыл бұрын

Thank u for the great content VCG Construction 👍

@VCGConstruction 4 жыл бұрын

Thanks George we appreciate it!

@wayenoneal2533 4 жыл бұрын

I'm impressed nice job Vince

@ducktorque9373 4 жыл бұрын

I saw this and decided to pick up the 6" #2 phils, I could set 3" brass wood screws upside down, and it would hold my 12v milwackme with a 4ah battery... overall that bit holds way better than the other craps that would keep snapping every time I wanted to set a screw larger than 6"

@jdreynolds29 4 жыл бұрын

I know this has been mentioned on TTR before and I corrected then and I guess my comment was not heard but 2 sheets of 20 gauge steel does not equal the thickness of 10-gauge steel. 2 pieces of 20 gauge steel is the equivalent thickness of 14 gauge steel. 20ga is 0.91mm 14ga is 1.89mm 10ga is 3.41mm so you can see one sheet of 10 gauge would be much closer to 4 sheets of 20 gauge

@VCGConstruction 4 жыл бұрын

You were serious Jason? I thought you were pulling my leg!! 🤣🤣 thanks!

@jdreynolds29 4 жыл бұрын

@@VCGConstruction all good! You know I love you and all of your vids. And I hope you know my reason forstating this is not for the purpose of correcting you it's more for the purpose of people watching the video not to accidentally get the wrong information. Thanks for the video!

@VCGConstruction 4 жыл бұрын

Come on cuz, we appreciate you helping out! You know I don’t have all the answers, and always look to the #VeryCoolGang for help!

@Superdan187211 4 жыл бұрын

And regular 20 gauge steel is not true 20 gauge. That's special order.

@Superdan187211 4 жыл бұрын

And framing with true 10 gauge is not fun. Factories like to use that kind of stuff.

@richardfuentes4204 3 жыл бұрын

I love my Makita impact. I do use Dewalt impact rated bits, I will be buying Makita impact rated bits once I run out of #2 philips bits. Great content.

@mjc8761 4 жыл бұрын

Nice! Can’t wait to see the wall finished 👍

@VCGConstruction 4 жыл бұрын

❤️

@skydancerforever 4 жыл бұрын

I am having a hard time deciding between the XDT12Z, XDT13Z, XDT14Z or sub compact XDT15ZB. i will be using it more for mechanical work, bolts nuts screws. not much for wood work. Any help would be appreciated! My 1st choice was the XDT13Z but now i am wondering if the different speed settings would be better?

@micjubba709 4 жыл бұрын

Very nice makita know what thier doing might have to buy some myself I like the box as well Vince

@ksoonsoon 4 жыл бұрын

Broke a Dewalt impact bit two days ago and started to look around for other options. Happen on your video and was very excited about this new Makita XPS. Bought one of their sets today so I could get multiple # 2 XPS bits. Holy cow, they did not disappoint. One of my buddies was also amazed at how well those bits fit in the screws. Thanks so much

@jonathankrauz62 4 жыл бұрын

AGREED! Last the longest above all competitors. Thanks for the video!!!

@VCGConstruction 4 жыл бұрын

Thanks for watching!

@mintslice2214 4 жыл бұрын

my jaw hit the floor when the driver hung on with the extension bit.. shocked.. staggered... amazed... wtf.. hahha

@southwestmedicalgrow655 3 жыл бұрын

Nice I was checking one out just yesterday for 99$ this video made want to pick one up today if they still have them.🤙

@koda0004 4 жыл бұрын

Wow.... Amazing. I´m sure gonna get that set of bits.

@VCGConstruction 4 жыл бұрын

You should!

@MonzaKheder Жыл бұрын

Great show, I love my Makita tools ⚒ ...

@Dragonslice29 4 жыл бұрын

“Cut all your 18 gauge by hand” i just went through that hell a month ago and wish it upon no one 💀

@VCGConstruction 4 жыл бұрын

🤣🤣👍🏻

@jrazo888 4 жыл бұрын

Try 16 gauge lol

@Dragonslice29 4 жыл бұрын

Jesse Razo No thanks 😂

@josephnoneofyourbeeswax8517 4 жыл бұрын

Love this video. It proves your point very well! I too will be buying more bits I don't need and hardly ever use. lol

@LDeezy662 4 жыл бұрын

And here I was thinking the thumbnail was gonna be click bait needless to say I'm thoroughly impressed

@stevek4438 4 жыл бұрын

Been up all night with Arthitus and what seems to be the start off corana but thanks Vince ya made me laugh with all the enthusiasm you put into playing with your bits wifes going to let me get some if the virus dont get me first, keep up the good work Guys :). GB

@tensazero 4 жыл бұрын

OK... The balancing act with the long bit got me sold. And ONLY the long bit.

@ccadama 4 жыл бұрын

@VGC Construction. Wow Vince. An 18V impact driver with a 5AH battery being held by a 6 inch Phillips bit with no magnet is truly amazing! Do you know any other magic tricks? Great review.

@abdomination 4 жыл бұрын

Making me want to buy Makita stuff again now

@mattwilson7037 4 жыл бұрын

It’s good to see higher quality bits are finally being sold in the US. I’ve been using Japanese and Wera bits for 20 years. Most Japanese tools follow JIS standards along with fasteners. That means the fit is perfect 98% of the time.

@robertopics 2 жыл бұрын

I thought wera was a German company?

@mattwilson7037 2 жыл бұрын

@@robertopics it is German, but their + tips are JIS standard.

@TarantuLandoCalcuLingus 4 жыл бұрын

Nice vid man, definitely getting some of those! If you havent check out makitas oil impulse driver, its nice when youre in a box or an enclosed space.

@snooka2484 2 жыл бұрын

Getting this set today

@heyman5525 4 жыл бұрын

The magnetic collar is nice...seems to fit snug on the bits. Torx bits seem to wear out the fastest of all bits. They're essentially disposable after driving 6"+ long fasteners.

@FA2FO91 4 жыл бұрын

I’ll be at Home Depot in the morning

@allanb3222 4 жыл бұрын

If there not closed that is lol.

@RH-wy2yh 4 жыл бұрын

Nice! I was also very impressed by the Milwaukee matrix carbide you did a video on. Which are the best in your opinion? The biggest downside on both... they are only releasing these sets in the US, I would love to try them myself.

@obxkoastie8170 4 жыл бұрын

Vince...I bought some of these Phillips #2 bits from HD and tried them in my impact driver. They are great. Then I made the mistake of trying two of them in my Dewalt drill. Snapped both of the tips before the head of the 3" outdoor screw was fully buried. So I guess I'll go back to the Dewalt bits for my drill and use these only in my impact driver.

@jeremynelson8496 Жыл бұрын

Lol. that is incredible. Makita is the goat for drill drivers hands down. I'm starting to come around on their other products too.

@mikenado 2 жыл бұрын

I mostly use use my dewalt 12v xtreme impact driver with flex torq bits but I’m seriously contemplating getting these xps bits to run with my dewalt

@phillipmcdonner8543 4 жыл бұрын

May have to check them out. My friend runs nothing but makita. I’ll have to give them a go but on my Milwaukee of course

@PerryCaulkins 4 жыл бұрын

I use the milwaukee shockwave bits and they have been very very good. Will try these out to see if they compete

@amritsingh2171 4 жыл бұрын

Love this channel!!

@VCGConstruction 4 жыл бұрын

Thanks Amrit we appreciate it!

@tzsteve33 4 жыл бұрын

Who doesn’t like a “tight fit”😉 great vid Vince

@chriscandies7371 4 жыл бұрын

very nice

@roninnovastar1321 2 жыл бұрын

just purchased the mag boost, works with regular 1/4 hex bits, tried the dewalt impact & hart impact bits, did not fit, is it designed just for makita bits? One thing for sure the magnet is powerful & holds screw excellent.

@mirceacostineanu4103 4 жыл бұрын

That really is AMAZING...nerver saw that kind of a tight fit...you should test some WIHA or WERA bits to see if they do that(because they ar better then dewalt milwaukee etc im general) that i would love to see 😊😊

@robertrada4783 4 жыл бұрын

By chance, about a month ago, it was a random Wiha bit I used when I hung (hanged?) the same Makita impact off of a phillips screw to show a friend how bits are supposed to fit. So, depending on the production run, sure. I throw bits out when they don’t hold a screw tight as showcased in this video. It’s my expectation and not novel to these Makita bits. There are exceptions, however. Coincidentally, the Vessel bits that Makita were previously distributing are purposely rounded down in the tumbler with the end goal of them lasting longer. Pretty much the same philosophy as edge tools: the sharper it is, the quicker it loses that edge. I don’t want to knock HD, Lowes, Ace and Menards too hard, but from what I’ve seen, I imagine their buyers muscle the power tool brands to resell cut rate bits that the retailers, in turn, charge way too much for. They tend to stock some excellent consumables in other categories. When I look at the prices at HD on suspect bits...they’re higher than the industrial brands. But yes, Zephyr, Apex, Felo, PB Swiss, Witte, Wiha, Klein, and Wera all do that. However, I’d have to imagine that there’s stuff from Taiwan and China that do just as well. Makita’s getting these from a Taiwanese company. Wiha’s bits come out of their Vietnamese plant now. Wera moved production to Czech Republic ages ago. That makes these fancy German bits as German as Makita. 😂

@ussindyboyz9683 4 жыл бұрын

Hey, who says you can’t use 3” drywall screws for building construction. I’ve built so many things with those😂 Now I use the T25 wood screws! Much easier!

@stephenleepmg113 4 жыл бұрын

That is crazy I use Vega Bits and they will not do that. Very cool. Thanks Vince and also I like your choice in gloves. I use the same gloves from the Depo.

@VCGConstruction 4 жыл бұрын

Thanks Stephen Lee!

@stevenmcconkey4882 3 жыл бұрын

Love it when vince says "well lets test it out" Followed by him stabbing a block of wood with a screw. 😄 🤣

@TheDpkustums 4 жыл бұрын

@AT VCG CONSTRUCTION Yo that was pretty cool bud But do a small follow up and see if other brands will do that and let us know. Another way to magnetize your bits is the klien or husky magnetizer work in a pinch I did it today mounting screws in a rack

@MCEngineeringInc 4 жыл бұрын

Nice set!👍🏻

@robbieschlerf8998 4 жыл бұрын

im a makita guy lol and im gald there stepping things up

@JAKE3914 4 жыл бұрын

nice demo on holding power!!!

@VCGConstruction 4 жыл бұрын

Thanks

@martinjames6798 4 жыл бұрын

Yeah, I'm sold!

@tukkus2 2 жыл бұрын

Outstanding

@ricklincoln5427 4 жыл бұрын

Vince, can you tell us what the difference is between the Makita impact X and the Makita XPS driver bits? Thank you. Keep up the good work. You guys are doing a great job!

@POLOLOUS3 4 жыл бұрын

I have used the good bits for years but I found the last two packs of #2s are wearing out fast. Maybe I got a bad batch or they changed ?

@crazedpaul9836 4 жыл бұрын

That makita looks nice....Makes me wanna go buy one LOL.

@harrymcough5545 4 жыл бұрын

Great show vince

@ShowemRight 11 ай бұрын

I just got delivered the Makita Impact XPS bits in 60 pc, similar to what you have here, I have the magnetic 1/4x 1/4 magnetic bit holder, and I inserted a SO3 bit (square bit into the magnetic bit holder ) how do you take the SO3 bit out from the magnetic bit holder, Im using a lot of force pulling it. Is there some kind of detent in it because the last thing I don't want to do is attempt to pull it out with pliers or vice grips.

@crazedpaul9836 4 жыл бұрын

Nice.... do some 16 gauge track and stud ... Not that i do it any more....but it will test those bits to see how the magnet stays in them... Like the Video Vince... good stuff....

@victorvek5227 3 жыл бұрын

Is the makita impact gold magnetic insert bit holder still the best way to magnetize the 1” bits? I thought they’d release a new XPS magnetic holder but can’t find any reviews!