NEW Makita XGT 40V! Should You Buy it?

  Рет қаралды 207,779

RR Buildings

RR Buildings

3 жыл бұрын

In todays Toolsday episode, I wanted to take a look at Makita's new XGT 40v lineup of cordless power tools. We knew the 40v was coming from Makita since it has been around now for a year I believe just not in the USA. I have been patiently waiting and am still waiting on the new 10 1/4 circular saw as well as the new XGT Rear handle that will only require one battery.
Let me know down below in the comments what you guys think. Is it worth jumping into a new platform, or are you going to sit this one out? I personally am excited for some of the larger more power hungry tools, but could go either way with the daily use smaller tools. Anytime I need to put two 18V batteries into my makita tools I really do wish it was just one so this might be a good thing.
Acme Tools sent me these out and although I have to send them back, go check them out and try them yourself.
imp.i284638.net/5bg3Dn
Purchase Building Plans Here including Cabin in the Woods, and my Parents Barndo
rrplans.bigcartel.com/
If you'd like to support RRBuildings, below are various ways to help!
Shirts: rrbuildings.bigcartel.com/
Hats: www.beachandbarn.com/collecti...
Patreon: / rrbuildings
Instagram: / rrbuildings

Пікірлер: 446
@victorgarin1925
@victorgarin1925 11 ай бұрын
Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
@travisjazzbo3490
@travisjazzbo3490 3 жыл бұрын
Makita does like no advertising and not known by many these days... but as far as power, quality, ergonomics, safety, price, sheer number of tools... can't go wrong with Makita
@rlrihards948
@rlrihards948 Ай бұрын
You know.. instead of spending thousands or millions in advertising, maybe spend it on something more useful.
@joesmith-yr4rm
@joesmith-yr4rm Жыл бұрын
It is a very good book for beginners as well as for those that are already into kzfaq.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt A very good basic ebook to keep as a reference too. I like it and the way the subject matter is presented. It has humor and that helps with the reading.
@jasonlittle9793
@jasonlittle9793 6 ай бұрын
We are building a shed and bought this to assist us Does not include any type of blueprints but very helpful to remind you about permits, different ways of doing the foundation or roof kzfaq.infoUgkxcLVQopTIucrxiVRQA0khLGQEnDVKCSMG and why they need to be that way, it also includes "pro tips" and lots of pictures and videos Very informative! I also bought it used for 3.18 plus shipping and in "good" condition. It had a little dent on the cover but that was it. Glad I bought it!
@adamfehr1994
@adamfehr1994 3 жыл бұрын
Took a risk and bought the 40v impact driver 6 months ago, I am so glad I did because it’s the best impact driver I’ve ever used, and I’ve used gen 3. The powers the same but the trigger and build quality is way better. At work we run all Milwaukee tools so I was wondering if the single battery would be a problem but it lasts like 3x as long as any Milwaukee battery and it’s guaranteed to last the whole day no matter how hard you run it. It doesn’t even slow down on GRK’s and Lags, 10/10 would recommend. It’s a stand alone tool that you can buy even if you’re on a different platform but want a better impact driver
@marcosquevedo6591
@marcosquevedo6591 2 жыл бұрын
How much cost u ??
@benm12310
@benm12310 Жыл бұрын
@@marcosquevedo6591 just purchased a made in Japan model for $200 usd
@micahbrown8259
@micahbrown8259 2 жыл бұрын
I went with the 40v makita they make the best I’ve been in construction for over 25 years
@billycanale1486
@billycanale1486 3 жыл бұрын
My boos just brought all the 40v and the drill is a monster. Drilled 16mm holes through 300mm lvl and pine framing on a whole house on one battery total of 170 holes no break to let it cool down. Dont have to drag a lead around anymore. Absolutely brilliant
@tehsheik
@tehsheik 3 жыл бұрын
Milwaukee = Power king. Makita = King of precision. They're not weak (just a little less power than milwaukee) but far more precise and far better ergonomically.
@MintStiles
@MintStiles 2 жыл бұрын
My Milwaukee platforms 18 and 12 have been really ergonomic and quality nightmares. I also have the Hilti 22V and 12V as well as the DeWalt - either of which is superior to Milwaukee when it comes to reliability and practical usability. Nearly all my corded tools are Makita. They have all been flawless. They are comfortable and light, and I don't mind the cord. If I had to do the battery again, it would be Makita and Hilti, no questions asked.
@igorverdes
@igorverdes 2 жыл бұрын
@@MintStiles m12 has the worst ergonomics, specially the grip.
@MintStiles
@MintStiles 2 жыл бұрын
@@igorverdes Definitely! You'd have to have gorilla hands to grip around the thing.
@garybrown9719
@garybrown9719 2 жыл бұрын
Actually the new makita 3/4 has as much power as the 1" Milwaukee
@williamminyard1952
@williamminyard1952 Жыл бұрын
Been having this argument with my Dad. I like Mikita. I work on boats/yachts. Enough said. Not with Dad. Lol😜
@demetresrobinson2694
@demetresrobinson2694 3 жыл бұрын
I love honest reviews..... I salute you sir for your pure real talk
@markb.1259
@markb.1259 3 жыл бұрын
A+ review! Thank you Kyle for not taking $$ from these companies and proving and honest man's review of their performance!
@johannes.f.r.
@johannes.f.r. 3 жыл бұрын
Battery life is actually noticeably better. The drill is a beast, so is the 18V 481, but the electronics make a big difference for peace of mind. The drill and driver are not enough to switch though as you said. But with the free battery that comes with most tools Makita make it easy to start with the new system. The mitre saw is impressive too apparently, even if it is expensive.
@MatthewC137
@MatthewC137 3 жыл бұрын
I didn't know about your channel until very recently but I subscribed after watching just two videos. You do a great job.
@thunderduckie01
@thunderduckie01 3 жыл бұрын
Big Makita fanboy here. I sold power tools for a few years and have been in the industry for 27 years. The way this was explained to me by the Rep was the new Makita 40v works much like the DeWalt 20v system..... you get max power until the tool and battery talk and decide that enough is enough and then drop to 18v. I still haven't been told what the Makita benchmark is, but DeWalt is 90% charge. I will say that I own the entire line of Makita 36v tools and I wouldn't give them up for anything. They may or may not have more power than the next tool, but I can work all day long and those tools will not die.
@robertfrost5020
@robertfrost5020 2 жыл бұрын
It's exciting that for years tool companies have been obsessed with power and runtime - so now 5 year old branded 18v tools are still competitive and durable. These companies will now have to innovate and look at more fundamental reasons for us to buy new tools. The 18v Makita platform might be only 90% as good as the new line ... However I remember the days when you bought an 18v circular saw and it could barely cut Hardboard. There was a reason 15 - 20 years ago to upgrade ... in the last couple of years battery powered tools are so durable, high powered and effective.... whats next? genuine innovation, accuracy, convenience, customer service? it will be interesting to see where they go to tempt us to spend our hard earned money.
@mattlwyatt
@mattlwyatt 3 жыл бұрын
With lumber prices it was probably $5 a cut and $5 a hole. It's crazy right now. Love the video and thank you for the comparison.
@ColeSpolaric
@ColeSpolaric 3 жыл бұрын
The look on your face when you drilled through that wood... Priceless!
@Fictitious_Character
@Fictitious_Character 3 жыл бұрын
I just bought the newest 18v Makita hammer drill and impact combo because I needed to replace a old Dewalt 20v hammer drill and the ergos and compact size are awesome. I have that flexvolt circ saw and it's a great saw. Thanks for the look at the tools.
@Bissen1993
@Bissen1993 3 жыл бұрын
Greetings from Denmark. I enjoy your videos man!
@100vwgabriel
@100vwgabriel 3 жыл бұрын
Thanks so much for this metal roof series , I just happen to have a metal roof project I’m bidding on . Thanks for the helpful info to help me get started .
@toothpastehombre
@toothpastehombre 3 жыл бұрын
The light placement on Makita's 40v is a little better thought out. Seems small, but helpful when needed. Also, I'd love to see the chop saw and router tests
@ToolsWithAdrius
@ToolsWithAdrius 3 жыл бұрын
Holy cow that hole cutting with the XGT was unreal
@ftkinney
@ftkinney 3 жыл бұрын
It was.
@gabemckay6718
@gabemckay6718 3 жыл бұрын
I have mostly Milwaukee cordless because their line is pretty robust but I do have a few DeWalt, Makita cordless tools. This just showed me, all premium brands basically perform the same. I am however very interested in that Makita 40V circ saw. I like how compact and smooth it operates.
@davehart817
@davehart817 Жыл бұрын
I have the 10 1/4" one and it has been the only one we use now, the Milwaulkees sit in the box now. It is super smooth and has crazy long battery life even cutting 4x4's!
@thejohnhend
@thejohnhend 3 жыл бұрын
I feel like with impact drivers, at some point the extra torque you could get from a higher voltage battery exceeds the capability of the hammer mechanics. That’s why you see negligible difference with the speed tests. Impact drivers rely more on the speed and weight of the anvil, so unless you put heavier anvils and increase the speed, torque isn’t really a big factor. Now with straight drilling, torque is the main factor and you can see the Makita 40v really shine.
@bcabrera971
@bcabrera971 2 жыл бұрын
I’m with you. I’d only get the 40v if I had to get something like a circular Saw or a big rotary hammer. I’m extremely happy with my 18v Makita.
@whirled_peas
@whirled_peas Жыл бұрын
I’ve got a few XGT tools now. 270mm circ saw is brilliant, oodles of power, 100mm depth rip on dry gnarly english oak, track compatible, surprisingly light too. Planer has insane power and lasts for ages. 3/4” impact is a monster too.
@THExLAWxMAN
@THExLAWxMAN 3 жыл бұрын
Looks like you have a great bunch of tools there, I would love to have 1/3 of them to use. Great heads up video of them working side by side.
@2chipped
@2chipped 3 жыл бұрын
I love #toolsday Kyle! When I am scribing 2 layers of 3/4 oak floating shelves , the following are the Makita tools I use. 18v barrel grip jigsaw,x2 tracksaw,xs 10 inch mitersaw, and a Ridgid 18v shop vac with 1 adapter to use 18v Makita batteries. The vacuum comes with the ability to have 2# 18v batteries at a time,but 2 years ago I had to source the adapter from Ebay Australia and I only bought 1. It cost $75 back then,probably can get a 3d printed much cheaper now. Out of all the preceding tools,the vacuum only lasts for about 10 minutes, so in scribing I can discharge all 12 of my 5ahr batteries . I bought the Ridgid for the price,and the 9 gallons of capacity. However the run time could be helped with 1 or 2 40volt batteries. I can see where a 16 5/16 beam saw with 2# 40v batteries is possible. Your test didn't involve a high amp draw,so that is where I think they can improve on. So a 24 inch chainsaw,a vacuum, and a beam saw should be a possibility. I installed fence for 15 years,and always hoped that the MX cordless coredrill was possible, trying to carry a generator 1/4 mile through a beach resort was not much fun.
@ShowemRight
@ShowemRight Жыл бұрын
Thanks for this fine presentation, I still run my Porter Cable 18 volt that I have about 7 tools and 3 third party batters for it...I bought the kit about 13 years ago ,..and Im ready to upgrade to the Makita 18 volt XLT, and give the Porter Cable tools to my son whose living in one of my rentals..He'll love it, I mean half the tools is over his house as it is.
@josephsalazar6428
@josephsalazar6428 3 жыл бұрын
Love your videos. Keep ‘em rolling
@raymondcheng3488
@raymondcheng3488 Жыл бұрын
I just got myself a set of XGT impact and drill- I've notice that they no longer use a smooth trigger with unlimited control, they use a step-style trigger like milwaukee and others- my makita hammer drill has that perfect smooth full control trigger, so you get one speed, then steps up to the next speed, etc when pulling the trigger. probably doesnt really change anything in real world usage but something note worthy and something i wanted to know before purchasing to manage expectations. IMO the benefits of an smooth trigger, is starting a drill point or screw for some finer finish work. but for the most part, regular use for these type of tools, not something to worry about.
@daryldavirro4237
@daryldavirro4237 3 жыл бұрын
Loved the video. I'm a dewalt guy but I know that there are better tools out there. I already have the battery platform and I can't justify buying another brand when these do what I need them to.
@tommygun5038
@tommygun5038 2 жыл бұрын
Battery platform is what it really comes down to. They will all get the job done.
@michaelbrennan7148
@michaelbrennan7148 3 жыл бұрын
Thank you Kyle. Helpful. Take care.
@MyName-bq7vx
@MyName-bq7vx 3 жыл бұрын
The power from the 40v was reason enough but the anti kickback sold me . I’m buying it this weekend
@TunedIn1
@TunedIn1 3 жыл бұрын
As usual an HONEST review... which makes your opinions mean more IMO👍
@cmc02888
@cmc02888 Жыл бұрын
From the job site to kitchen back to landscaping thanks for the video mang
@ozoneswiftak
@ozoneswiftak 3 жыл бұрын
I have been following you, your a tool collector. If you dont have it. It must suck bananas. Thanks for your videos. I'm honestly happy with my 20 volt. But better, is better.
@lenny2137
@lenny2137 3 жыл бұрын
Man I only found Kyles channel a week ago and I’ve watched nearly every vid lol LOVE IT. I don’t know why we don’t use post frame here in Ireland 🤔🤷🏻‍♂️
@lucasmancini7415
@lucasmancini7415 2 жыл бұрын
I love my 7 1/4 rear handle 40v and the 40v impact and hammer drill. Even their 6in grinder is sweet. But m18 super sawzall all day for sawzalls.
@GlassImpressions
@GlassImpressions 3 жыл бұрын
I really like your approach to this review
@petebird7171
@petebird7171 3 жыл бұрын
Good review, keep em coming, 👍👍👍👍👍
@sparx2391
@sparx2391 3 жыл бұрын
Never been a fan of milwaukee, makita looks really solid. All my tools are Bosch, and never had any problems with any. Just got the 18v bi turbo sds plus, 5.1 joules of impact energy, or 4.3 ft pounds.
@lwild04
@lwild04 Жыл бұрын
I love Bosch and Makita. So far I’ve been the only one on the job sites with Bosch and older Makita 18V. I pretty much only see Dewalt, Milwaukee and then Makita. Some of the guys have Ryobi as well.
@stensihver9925
@stensihver9925 3 жыл бұрын
Idea is that you buy big tool like a rotary hammer drill and then you dont need two battery lines because XGT line has all the tool LXT has
@bamaboy9133
@bamaboy9133 3 жыл бұрын
The LXT tool line has over 200 tool options. I think it’s 206 or 216 in total. Makita has the biggest cordless line on the market
@stensihver9925
@stensihver9925 3 жыл бұрын
@@bamaboy9133 I agree, thats the main reason Makita is good.
@svn5994
@svn5994 3 жыл бұрын
@@stensihver9925 Quality > Quantity.
@benjamintorres9211
@benjamintorres9211 3 жыл бұрын
@@svn5994 their quality is still top notch
@baseballdude8491
@baseballdude8491 3 жыл бұрын
I luv my Makita tools and I'm sure that they will perform well but I have slowly converted my Milwaukee and Makita tools(where it makes sense) to Metabo HPT 36V-Metabo HPT made their Multivolt 36V batteries backwards compatible with the 18V tools and allow for the AC adapter option-Makita should have at least done the backwards compatibility as Metabo already showed it is possible and they entered the market 3 yrs ago-late.ti the game Makita I luv my Triple Hammer the best also-The triple hammer does what it's.supposed to do drive screws better than the others and my 18V Makita has done 2nd beast-my gen 3 Milwaukee has a bit more power for large lags bolts but I don't normally use the impact driver for large lags anyway-but the cruddy Milwaukee collet led me to get the triple hammer Not sure why guys have missed the Metabo HPT line-its great and has more if the onsite options I need
@gangsterpig8231
@gangsterpig8231 3 жыл бұрын
Great video thanks for uploading
@guillermog130
@guillermog130 3 жыл бұрын
The Makita XGT grinder is also a huge leap over the latest LXT grinder from what I’ve seen. It looks like a beast.
@wearetheremnants1615
@wearetheremnants1615 3 жыл бұрын
I've been using one for 6 months it's a beast
@maisummarceneiroumdemuitos8037
@maisummarceneiroumdemuitos8037 Жыл бұрын
you are right I am using it in hardcore more here in Brazil making industrial furniture, it's as effective as my 2000w corded bosh grinder! For stainless steel the hability of reduce speed it's a must to don't cook the material.
@davidcordos9220
@davidcordos9220 3 жыл бұрын
Finally the XGT 40V in USA review! Great!
@CedarTrailsLiving
@CedarTrailsLiving 3 жыл бұрын
Haha first RR video there at the intro...that's funny bud. Good one. Been watching for years.
@RRBuildings
@RRBuildings 3 жыл бұрын
Haha thanks bro
@CedarTrailsLiving
@CedarTrailsLiving 3 жыл бұрын
@@RRBuildings Also don't tell me I need that new Makita. Saw you running that 18v one in the other videos so started building out a set. Love it. Got the 5ah battery and it runs screws all day on a charge. Wife's gonna kill me if I upgrade again. :)
@maisummarceneiroumdemuitos8037
@maisummarceneiroumdemuitos8037 Жыл бұрын
I still have most of my tools in 18V. Having said that there are some 40V tools that make me retire the 18V version of same tools. The makita finishing nailer 40V is one of them, it's as fast as I can use my finger and way better than my old 18V. I am making a lot of industrial steel furniture in TIG welding so a lot of grinding so I use a 40V grinder with variable velocity in something like 6000 rpm to don't cook the steel, amazing tool. But I agreed with you: for most of tools the 18V is enough. I use a old makita 12V screwdriver for electrical installations, lightweight, don't need a chunky 40V to this job. Last week I saw a contractor cutting tarmac with the new 40V x 2 to install a pipe and, man, insane power, more strong that a few combustion tools, the only drawback is that they told me that the batteries runs out in less than 10 minutes. I think that the new 40V x 2 have potential to substitute a lot of combustion heavy tools. The new 40V chainsaw is on my radar, appears to be a good use for this new platform.
@michaelplays2449
@michaelplays2449 3 жыл бұрын
Good review ,thanks
@mcd5082
@mcd5082 3 жыл бұрын
Good honest review
@HotForgeChaos
@HotForgeChaos 3 жыл бұрын
Those Makita Efficut blades are I reckon just as good as the Diablo blades. I've got a Makita Bluemak 60T blade on my 10 inch Ryobi drop saw and it is fantastic for finishing lines. Its a little bit too fine pitch for framing but that old saw has a lot of grunt to compensate
@user990077
@user990077 3 жыл бұрын
12:57 "I gotta stop wasting this lumber, guys. This stuff is like gold." Ya right, that board already looks like Swiss cheese. Nice clear board too.
@RRBuildings
@RRBuildings 3 жыл бұрын
It was warped as can be actually
@rainsinvelvet1234
@rainsinvelvet1234 3 жыл бұрын
Funny, I was like- there goes 50$ of wood, LoL. At least here in CA!
@John-ds1um
@John-ds1um 3 жыл бұрын
@Dan H. better check your calendar bud, Katrina was in '05. But regardless, natural disasters do influence building materials. It's not localized however. They trend up nationally.
@brandonlee8400
@brandonlee8400 3 жыл бұрын
9:12 👀 next level
@VenturaWorkshop
@VenturaWorkshop 3 жыл бұрын
Fair review, I trust you in your tests/ opinion. Can't believe people wouldn't believe it if you say they are fully charged or 1 screw is further in then the other.
@RRBuildings
@RRBuildings 3 жыл бұрын
Trust me people find anyway to pick apart a test or review that doesn’t align with their opinion...
@styxxtheanimal5720
@styxxtheanimal5720 11 ай бұрын
@@RRBuildings only the closed-minded morons do that lol
@BG-vq9fd
@BG-vq9fd 3 жыл бұрын
Keep them coming
@riba2233
@riba2233 Жыл бұрын
nice testing, thanks! BTW there is a new gen2 makita 40v sawzall and it is most powerful cordless on the market right now and it has orbital also.
@thiscommentmightbefunny.1810
@thiscommentmightbefunny.1810 3 жыл бұрын
I think we all made the same face as Kyle when the 40V drill blew through the board. Made that huge self-feed bit look like a small ship auger lol. I said "Holy $#!+" at the same time he did! Gotta test that against a hole hawg
@skywalkerrougeone5060
@skywalkerrougeone5060 3 жыл бұрын
Kyle .. I do shit like that .. I purchase one tool.. a couple batteries and a charger.. for one purpose lol so this review helps me out a ton lol primarily own makita, but definitely have some Milwaukee’s and dewalts.
@Anglo-EgyptianMan
@Anglo-EgyptianMan 3 жыл бұрын
Don't underestimate the difference a high output battery can make. Great video!
@johnvanderwielen1801
@johnvanderwielen1801 3 жыл бұрын
Wouldn’t be a fair test that way
@banannaninja
@banannaninja 3 жыл бұрын
@@johnvanderwielen1801 it would. Just compare it to makitas high output batteries. The 4.0ah & 5.0ah 40v makita batteries use 21700 cells just like the m18 high output. The 2.5 makita battery he used in the vid has 18650 cells.
@mattryan1986
@mattryan1986 3 жыл бұрын
@@banannaninja the 5ah actually uses 18650's believe it or not. Its only the 4ah that uses the 21700 cells
@banannaninja
@banannaninja 3 жыл бұрын
@@mattryan1986 ah, that’s a little lame.
@nickbs2286
@nickbs2286 11 ай бұрын
I have the XGT hedge trimmer and blower. Both excellent, I bought for the extra power these tools provide. Both are night and day over the 18v.
@markroper9269
@markroper9269 3 жыл бұрын
The video is good! It kinda reinforces what we already know. It you are going to upgrade.......what are you gaining using a new battery platform. That is a lot of money to replace tools you already use. Now is the new tools made coffee in the morning..........:P
@KonkFPS
@KonkFPS 3 жыл бұрын
Nicely done!
@GreenmarkBuilders
@GreenmarkBuilders 3 жыл бұрын
I love your perspective Kyle! Love the triple hammer and the colour green. I’ve been a Dewalt guy for years but slowly starting to bring in Metabo.
@derdude8201
@derdude8201 3 жыл бұрын
Do you mean the real german metabo or the metabo hpt brand?
@baseballdude8491
@baseballdude8491 3 жыл бұрын
HPT brother(Hikoki)
@GreenmarkBuilders
@GreenmarkBuilders 3 жыл бұрын
@@derdude8201 Metabo HTP
@espressomatic
@espressomatic Жыл бұрын
40v single battery track saw. Nice. Up until recently, their compact blower - now they also have an 18v version.
@cajunice3588
@cajunice3588 3 жыл бұрын
I was impressed with that hammer drill
@baraksinz2937
@baraksinz2937 3 жыл бұрын
Metabo HPT Triple Hammer 36v is an awesome impact driver! Speed isn’t everything. Love the ergos and how smooth it runs.
@PhillyFixed
@PhillyFixed 3 жыл бұрын
Metabo HPT deserves more attention than it gets!
@davehart817
@davehart817 Жыл бұрын
I bought a 10 1/4"saw, holy $*#% it is awesome! I'm ready to start selling off my Milwaulkee stuff and start switching back to Makita!
@spilleradam
@spilleradam 3 жыл бұрын
I think the XGT tools will be good, like the rear handle saw or miter saw, but I wouldn’t bother with the impact driver or drill , I think 18 volt is good enough .
@rcud1
@rcud1 2 жыл бұрын
The 40v driver seems about the same as 18v, but the 40v drill is killer.
@kip8790
@kip8790 Жыл бұрын
The 40v drill kicks out over 1hp
@passg1920
@passg1920 3 жыл бұрын
Now I want a Metabo impact driver..
@tylertschetter3568
@tylertschetter3568 3 жыл бұрын
$$
@jazsambi2347
@jazsambi2347 3 жыл бұрын
Been about it yeah lol
@d.a.9937
@d.a.9937 3 жыл бұрын
It's only $279 at Lowe's, and comes with two 4/8AH batteries and the hard case.
@reidzr2s10
@reidzr2s10 3 жыл бұрын
Absolutely it’s worth upgrading. Its the manly thing to do, just ask Tim the Tool Man Taylor!!! I’m gonna upgrade but I will also keep my 18 volt Makita tools.
@smilingcopycat
@smilingcopycat Жыл бұрын
I have never understand why people are hunting for which hammerdrill or impactdriver is the fastest......I doesn't matter, you drop one screw and you have lost that time anyway, there is so many other things the effects your job.....
@glenellynrunner
@glenellynrunner 3 жыл бұрын
Thanks Kyle
@Aepek
@Aepek 3 жыл бұрын
17:22 OH, we all know you and Greg are keeping those XGT impact & hammer drill drivers🤣
@walterperrault
@walterperrault 3 жыл бұрын
Batteries are the main problem and hook for sticking to one brand because some brand tools are better than other brands in a perfect world there would be a universal Battery and these tool companies can concentrate on making their brand of tools even better that's my two cents kyle great demo.
@jeffsnyder289
@jeffsnyder289 3 жыл бұрын
Really love my Makita & Hitachi tools, aren't the most powerful but are definitely my preference when working with them all day. They excel in ergonomics & precision, making them my go to tools. I just wish Makita would have went backward compatible like HPT's Multivolt.
@banannaninja
@banannaninja 3 жыл бұрын
The biggest reason makita made it a whole new platform is because they needed to completely redesign the battery terminal connectors on the batteries to handle more power going through them. They needed to make them double the size. The current design of the lxt makita batteries has been around since 2005. 16 years. They probably didn’t realize how much batteries would improve in the future and the terminals wer never intended for the current demands of modern tools. No other tool brand has kept their battery platform the same for that long, and makita isn’t ditching the 18v lineup any time soon.
@jeffsnyder289
@jeffsnyder289 3 жыл бұрын
@@banannaninja I understand, just disappointed because Hitachi/Hikoki was able to do it with their batteries & they have been the same since 2006. They just added the extra pins on the 36v tools & their Multivolt batteries to make it 18v/36v compatible. With Hikoki/HPT 18v/36v & DeWalt's 20v/60v, I feel Makita could've made it work but I know they are very sensitive with their battery tech, like when they switched to their Star Protection & some of their older batteries wouldnt slide onto newer LXT tools or how they disable them when their chargers detect issues. I will be adding more powerful tools from Multivolt or Flexvolt in the future rather than investing in Makita 40v, but I'll continue to use their LXT 18v since they are so good.
@mesh1248
@mesh1248 3 жыл бұрын
To me its not about what impact is faster or other statistics around performance cause they all r very similar i try to buy of quality and longevity of a tool but those are two factors that r hard to measure and compare between one another
@TokyoCraftsman
@TokyoCraftsman 3 жыл бұрын
I'm still on the Hitachi 14.4v line of tools, as I own 14 or 15 tools that use that battery, and I have five 14.4v batteries. I moved into the 18v cordless with the Bosch line of tools, in particular, the 18v cordless hammer drill the Bulldog (thanks for the recommendation!), I'm not really happy to have two battery platforms but it is what it is. For me moving to the Hitachi 36v or the Makita 40v is just not an option, way too much money invested in the platforms I have. Great review as always Kyle. Cheers from Tokyo! Stu
@BenjaminBennett
@BenjaminBennett 3 жыл бұрын
Makita isn't really 40v , its is 36v just like hitachi /metabo hpt multivolt 36v batteries. They literally use the same cells and same number of cells. they are playing marketing games. same bs that dewalt does with their 20v max line. Note makita and dewalt legally in many countries have to market them as 36v and 18v respectively because otherwise it would be false advertising.
@MadLadsAnonymous
@MadLadsAnonymous 3 жыл бұрын
Would love to see that XGT hammer drill against the Flex 24v Turbo model. Great vid!
@baseballdude8491
@baseballdude8491 3 жыл бұрын
Where was the Metabo HPT 36V Hammer Drill Best hammer drill in my collextiin
@brmveen56
@brmveen56 3 жыл бұрын
40 volts on a drill feels a bit like the V8 blender they did on top gear.
@DixieNormous1
@DixieNormous1 3 жыл бұрын
Think I'll keep my Metabo HTP recip saw and impact driver and my 60v 9 amp hour DeWALT circular saw
@vikingxd8644
@vikingxd8644 3 жыл бұрын
I definitely feel like the extra lighting on the left side of the shop was an advantage to the Milwaukee. If you could make the light more balanced I'd think it would make for a more accurate comparison.
@alexmills1329
@alexmills1329 3 жыл бұрын
😂😂
@USMCPFC1
@USMCPFC1 3 жыл бұрын
Gold.
@Ruudwardt
@Ruudwardt 2 жыл бұрын
The XGT grinder and big rear handle saw are excellent. Corded hand tools belong to museum now.
@maisummarceneiroumdemuitos8037
@maisummarceneiroumdemuitos8037 Жыл бұрын
for contractors. For industrial use like shipyards a corded grinder works usually 8hs a day straight!
@LemonySnicket-EUC
@LemonySnicket-EUC 3 жыл бұрын
I've gone backwards. I'm liking my Makita sub compact 18v line better than my regular LXT 18v.
@ckone671
@ckone671 3 жыл бұрын
Kyle please try and compare the new FLEX power tools.
@jpbiscaro8694
@jpbiscaro8694 3 жыл бұрын
The makita 40v skill saw is nice but I wish it could be tweaked just a little. After using the milwaukee 6 1/2 saw
@mikejf4377
@mikejf4377 3 жыл бұрын
Great video. Is that Dewalt a gear drive saw? I just picked up two Milwaukee tool because I’ve seen them used buy my friend at his shop and I wanted it for use at my hose. Great tools.
@marcotoni231
@marcotoni231 3 жыл бұрын
I’ve always liked makita. Milwaukee tools are cool but they break fast for some reason
@pointedspider
@pointedspider 3 жыл бұрын
I have Milwaukee V28 tools from 05 and they still work. I used them for 14 years installing HVAC and fixing houses. I bought 2 new batteries(M28). The tools are immortal!
@Patrick-857
@Patrick-857 3 жыл бұрын
@@pointedspider Depends on your use case. I have found Makita to be the most durable followed by Dewalt. Dewalt is rough though, their tools aren't at all precise, whereas Makita is refined and has very good fit and finish. Milwaukee has really nice tools, with tons of power, but their electronics fail suddenly.
@alexfrankl7861
@alexfrankl7861 3 жыл бұрын
Agreed , i found my Milwaukee gear very unreliable
@rpmspeedyblue
@rpmspeedyblue 3 жыл бұрын
Our company used Makita for many years and switched to Milwaukee. I have noticed that Milwaukee hand tools do not last long. The motors burn out after constant use. I kept several Makita tools that the shop had for over 2yrs and they keep going.
@glenarseneau1231
@glenarseneau1231 3 жыл бұрын
I’ve had my Milwaukee tools forever no issues, you can’t go wrong with the big 3 whatever one you go with
@doctordoom1337
@doctordoom1337 3 жыл бұрын
I've been watching Japanese videos on these tools for some time now. I cannot fathom why Makita wouldn't make the platform cross compatible like Hitachi did with the 18/36v.
@marshallferron
@marshallferron 3 жыл бұрын
A lot of makita's 36v tools have the batteries right next to each other so they'd never work with wider batteries.
@LemonySnicket-EUC
@LemonySnicket-EUC 3 жыл бұрын
It's two different markets.
@antsbantsb8430
@antsbantsb8430 3 жыл бұрын
awesome!
@billwestphal1421
@billwestphal1421 3 жыл бұрын
Kyle can you put something long in the drill driver and see if it has chuck wobble. I just picked up the 18volt and it has the wobble just like my older ones. I was told to send it in and seems they know they released a drill with issues. May be your contacts have answers that make sense because you buy it to use it not to wait for the bugs to get fixed first.
@5jmac2
@5jmac2 3 жыл бұрын
The first time I cranked my chuck and it slipped like that I thought I broke a brand new tool 😂
@wayneprice6918
@wayneprice6918 10 ай бұрын
Bought a new Makita 40v XGT circular saw. Had to rip some 3" thick hickory . Ripped half with the new 40v XGT and half with 36v LXT. The 40v XGT was faster and the battery drain much less. The 40v XGT was also much cooler than the 36v LXT. When the batteries run cooler they will last longer.
@fletcha7777
@fletcha7777 3 жыл бұрын
Bro the hammer drill an the circular saw alone...! Makes it worth investing in the 40 volt platform.
@pobin3255
@pobin3255 3 жыл бұрын
Hi Kyle! Watched all your videos. When can you come to Southern Idaho and build my 80' X 50' Post Frame home?
@theremodelerslife
@theremodelerslife 3 жыл бұрын
Gotta love the Midwestern "ope"
@jamesonkruger6989
@jamesonkruger6989 3 жыл бұрын
We run all dewalt with 60v batteries, I wish you had one in there. I'm curuous as to how it would compare.
@kalle8836
@kalle8836 3 жыл бұрын
It Will lose to Milwaukee
@svn5994
@svn5994 3 жыл бұрын
@@kalle8836 Milwaukee drills outperform Milwaukee by a mile.
@petermichael8921
@petermichael8921 2 жыл бұрын
The free tool giveaways at HD are a pretty solid deal right now on the LXT. I just got a 36v (2x18v) Makita 7 1/4 saw kit with 2 batteries, charger AND a "free" angle ratchet, all for just 249.00. 2 of the 5 0 batteries with the charger by themselves are 199.00, so how could I resist? Even knowing it's the "older" style I have no problem sticking with 18v for a while. 19 Makita tools in and I'm very happy since my Dewalt conversion.
@alanworks4354
@alanworks4354 3 жыл бұрын
I'm slowly moving from Porter Cable to Milwaukee, and love it so far. I was extremely disappointed that Milwaukee doesn't make a track saw. I ended up going with Makita on that, but upset I now have another battery platform to deal with.
@chrisE815
@chrisE815 3 жыл бұрын
I was in the same boat a year ago. Now I have a sh*tload of Makita batteries and tools haha. If you like the track saw, get the router track adapter next. Love the compact router too!
@davehart817
@davehart817 Жыл бұрын
They have one out now!
@95dodgev10
@95dodgev10 3 жыл бұрын
With todays lumber prices this was an expensive video even without including tool costs
@Squat5000
@Squat5000 3 жыл бұрын
DeWalt 60v adds a lot to the table but works on the 20 lineup. No need to change yet.
@susann4209
@susann4209 3 жыл бұрын
I bought dewalt because of the flexvolt and I'm not disappointed at all the skillsaw is a monster, I don't ever pick up a corded saw anymore
@interman7715
@interman7715 3 жыл бұрын
I looked around for a while before settling on Dewalt Flexvolt, after seeing all these other brands chopping and changing I know I made the right choice ,Flexvolt is future proof and is so powerful it will never be outdated.
Makita 40v XGT GSR01Z 7-1/4" vs. Skilsaw Mag 77 Circular Saw Review
16:06
Essential Craftsman
Рет қаралды 178 М.
New MAKITA XGT 40V Hammer Drill & Impact Driver (ARE NOT WHAT THEY SEEM)
14:54
A clash of kindness and indifference #shorts
00:17
Fabiosa Best Lifehacks
Рет қаралды 42 МЛН
Makita 40 Volt Mitre Saw: Is it Worth It?
17:55
Scott Brown Carpentry
Рет қаралды 254 М.
20 NEW MAKITA XGT Tools and Makita Patents
17:05
Tools & Stuff
Рет қаралды 22 М.
Tool Review- Rear Handle Cordless Saws
18:42
AwesomeFramers
Рет қаралды 160 М.
Makita's New XGT Spanks Everything We've Tested - GWT01Z
17:27
Torque Test Channel
Рет қаралды 309 М.
BEST Makita Impact Driver in 2024? NOT what I expected!
15:33
Philly Fixed
Рет қаралды 16 М.
2 Years with Makita 40v: Here's What I Think!
18:41
Scott Brown Carpentry
Рет қаралды 456 М.
Made in "Japan" Makita Better? Let’s find out!
10:27
Project Farm
Рет қаралды 2,2 МЛН
From milwaukee to Makita. Why I changed tool platforms
7:06
Addicted to Tools
Рет қаралды 518 М.
Makita GPH01 40V XGT Hammer Drill Driver Review [62 CLUTCH SETTINGS]
19:15