New Method for Removing Copper from Motors
Рет қаралды 111,704
4 ай бұрынIn this video I show a new method on how to remove copper from a motor, no cutting required.
If you want to see another method for removing copper from a motor, watch this video • Using a Machete to Cut...
If you enjoyed this video please like/share/leave a comment. If you would like to learn more about scrapping please consider subscribing to my channel. You can use this link here and it will take you directly to my channel homepage where you can click the subscribe button and check out my other videos. / @scrapitall200
paypal.me/scrapitall200?count...
Hi, my name is James and I'm a hobby scrapper who loves taking things apart to separate the various metal to make some extra money!
In my video I hope to show you how to scrap things, I also hope to show you the fun in scrapping different items that we all can find easily.
Come join me on my scrapping adventures where I share how I scrap items for easy money.
Please have a look at my scrapping videos and I hope you'll consider subscribing to my channel.
If you'd like to mail me anything you can email at scrapitall878@gmail.com and I'll give you my mailing address.
Thank you for stopping by and God bless y'all.
Become a member for less than a dollar a month. Your financial support will go to shop supplies, tools and anything else I need to scrap metals and make these videos.
I thank you very much for all of your support!
/ @scrapitall200
#copper #method #hacks #makingmoney #hobby #scrap #scrapper #scrapping #recycle #metal #junk #scrap #howto
@scrapitall200 4 ай бұрын
Thank you for watching! Please hit the 👍
@stephenchienjo3283 4 ай бұрын
Thank you for blessing us. May the Lord bless you too. Amen
@scrapitall200 4 ай бұрын
@@stephenchienjo3283 thank you so much, I really appreciate that! Thank you for watching.
@kingbigglez4068 4 ай бұрын
Thanks for the prayer at the end! May God bless you as well.
@scrapitall200 4 ай бұрын
Thank you so much! I appreciate you watching.
@mikegalietta8497 4 ай бұрын
New hobby scrapper here...wanted to say I appreciate you Scrapitall! I love the way you demonstrate HOW to scrap everyday items. A lot of scrappers on you tube show their hauls to the yard and or collecting...which is fine...you educate. I agree with others--for some reason I find your voice and method soothing; easy to watch. Keep 'em coming!
@scrapitall200 4 ай бұрын
Wow, thank you so much for your wonderful comment, I really appreciate that.
@johnngige6157 3 ай бұрын
God bless you my precious brother for your educative presentations. I also love scraping.
@scrapitall200 3 ай бұрын
@@johnngige6157 thank you so much brother. I pray that the Good Lord will bless you!
@claysmith782 2 ай бұрын
After U remove the copper would the rest of the materials amount to much towards scrap also. I just seen your video for the first time and enjoyed the info. Thanks U.XOXO 😊
@scrapitall200 2 ай бұрын
@@claysmith782 yes, the steel has scrap value as well. Most yards will classify it as prepared steel. Thank you so much for watching.
@thehumbledabbler 4 ай бұрын
I really like the prayer at the end. Great to see someone sharing their faith in a non pushy way. Keep it going brother .
@scrapitall200 4 ай бұрын
Thank you so much, I really appreciate hearing that. Thank you for watching and God bless!
@hornetsnestmedia 3 ай бұрын
Shawn on the Bikes And Beards KZfaq channel likes to read a Bible verse in every one of his videos. I always enjoy that.
@scrapitall200 3 ай бұрын
@@hornetsnestmedia never heard of that channel before, I’ll have to check it out. Thank you.
@lizzard16 4 ай бұрын
Love the way you keep trying new ways to do disassemble things! They usually have less loss of material than the quick ways.
@scrapitall200 4 ай бұрын
Thank you so much. I really do enjoy trying new ways. Thank you for watching
@nothingfancy6022 4 ай бұрын
Awesome videos buddy. I’m a scrapper also. I do clean outs on homes and properties. That’s why I started scraping. God bless you as well.
@scrapitall200 4 ай бұрын
That’s awesome! It sure is a lot of fun. Thank you for watching and God bless you you too.
@cointenderrarities933 4 ай бұрын
I found a commercial deli meat weight machine. Now i can weight what i just scraped out with current price imputed and see how much i just made. It's fun finding FREE stuff. Nice video once again!
@scrapitall200 4 ай бұрын
Heck yeah it is! Thank you for watching.
@tannerc900 Ай бұрын
I wish I came across this sooner honestly. Easier, quieter, and a lot less messy. Thanks for this! You got yourself a new subscriber (:
@scrapitall200 Ай бұрын
Thank you so much! I have found that some motors it doesn’t work on, so just keep that in mind.
@ThatsRightRecycling 4 ай бұрын
That's Right, i have seen this method before across the big pond.. Nice Job Buddy 👏
@scrapitall200 4 ай бұрын
Thank you my friend, thanks for stopping by and watching. It’s always appreciated.
@ewastemike7700 4 ай бұрын
Well you know i am heading to try this. If it don't work your in trouble. Awesome video my friend.
@scrapitall200 4 ай бұрын
Just blame HH Recycling, I blame everything on him 🤣 Thank you for watching buddy!
@styverdyver 4 ай бұрын
Nice idea! I will try this on the next motor I scrap. Thanks for the prayer after each video too! God bless.
@scrapitall200 4 ай бұрын
Awesome, hope it works well for you. Thank you and God bless you!
@billd7829 2 ай бұрын
Wow thanks for posting this video.. I scrap those all the time. This is good info.. I'm tired of paying almost 10 bucks a wack for cutting wheels so this is a good way to get the copper out without cutting.. 👍👍
@scrapitall200 2 ай бұрын
Machete works really well too, it’s my go to way of getting the copper out. Thank you for watching.
@lljairsoft1201 4 ай бұрын
Thanks James! Great video today and can’t wait for the next. Had fun in the live last night. Sorry I had to leave, I got Antsy watching you scrap stuff and decided to do it myself 😂 god bless!
@scrapitall200 4 ай бұрын
Thank you so much brother! I’m happy you had fun and no worries at all. I’m happy to inspire some scrapping lol. Thank you for watching and God bless you
@deweysteverson74 4 ай бұрын
That was an awesome way of getting that copper out of those coils. Thanks for sharing this info with us. Stay safe my friend and may God bless you in all that you do. See you on the next video.
@scrapitall200 4 ай бұрын
Thank you so much brother, I really appreciate that. Have a wonderful week and God bless you too!
@johnblystone8781 4 ай бұрын
It seems like a good idea to have alternative methods. Thanks for sharing!!!
@scrapitall200 4 ай бұрын
I completely agree! Thank you for watching.
@rixismetals 4 ай бұрын
Great video on showing a different way of recovering the copper from motors
@scrapitall200 4 ай бұрын
Thank you my friend. It’s fun trying new things. Thank you for watching.
@rixismetals 4 ай бұрын
@@scrapitall200 your welcome and I watch all your videos 👍have a good weekend
@scrapitall200 4 ай бұрын
You rock my friend. Thank you and you too!
@jesusfelan604 Ай бұрын
Yep, my third video I've watched today and I like the way you do the step by step methods. Now these types I've always cut but after seeing this method, I'm gonna try it and see how it works for me. I scap when time permits and although I am retired, I still work a full-time job, so the extra cash from scrapping is worth it to me. Thank you again for sharing your time and knowledge, respect and may God bless you always.
@scrapitall200 Ай бұрын
Thank you so much for watching 3 videos today, I greatly appreciate it. Scrapping is such a great way to earn some extra money for sure. This method won’t work on all motors, but it’s worked on 3 different ones I’ve tried. Thank you and God bless you too brother!
@jesusfelan604 Ай бұрын
@scrapitall200 we had that bad storm here in Houston last week, so I went out to see what people were throwing away. Found many old tube tvs, flat screens, and appliances. Very good hauls this week and now to the task of taking everything apart. I'm a first-time viewer and a new subscriber, so thank you for your time.
@scrapitall200 Ай бұрын
@@jesusfelan604 I saw some footage from that storm, crazy damage. Sounds like you scored a lot of good scrap. I sure do appreciate you subscribing and watching.
@ScrapMan69 4 ай бұрын
That’s an awesome way to do it learn something new every day buddy!! There’s always something that’s gotta give you problems buddy! Awesome video!
@scrapitall200 4 ай бұрын
Thank you so much my friend!
@holliday72889 3 ай бұрын
I always take time into consideration when scraping. It’s really easy to make a $1 an hour on a stubborn piece of scrap. You gotta know when to give up and move on to something else. I’ve done every method because every winding is different, but air chisel is best. No matter how big/small or even burnt, it’s shakes everything a part
@scrapitall200 3 ай бұрын
My preferred method is cutting the stator in half with a machete then I pull the copper out. I’ve seen air chisels used and they are great. I have fun scrapping it all and as long as I’m enjoying myself, I’m not concerned about the amount of time something takes, but I know many do care about the time. Thank you for watching!
@BlacksmithKing81 Ай бұрын
I just started following and I love your videos! Very informative and fun to watch, I also love the prayer at the end!! God bless and keep making videos 🙌🏼✝️
@scrapitall200 Ай бұрын
Thank you so much God bless you and thank you for being here!
@luckyphil_01 4 ай бұрын
Very nice Sir! Glad to see less cutting/copper dust and you enjoying good old scrapping ;) Keep it up!
@scrapitall200 4 ай бұрын
Thank you so much! Thank you for watching
@scrapitjc 4 ай бұрын
This is great for someone who does not have the means or the place to cut. Great job buddy😊
@scrapitall200 4 ай бұрын
Exactly, you get it buddy lol. Plus it’s just fun to try new things. Thank you for watching buddy.
@jamesfrench7299 3 ай бұрын
I like any practical methods that avoids cutting and appreciate this way of achieving that end and leaving cutting as a last resort where possible.
@scrapitall200 3 ай бұрын
Awesome! I appreciate you watching and leaving a comment.
@IndustrialPermaculture 4 ай бұрын
Thank you once again for your insight and your willingness to try new things then bring them to the scrapping community for us all to learn. You are an asset to our growing community and so many of us appreciate what you do here! Please keep up the amazing work ethic that you have shown. Cheers from down under.
@scrapitall200 4 ай бұрын
Thank you so very much, I really appreciate that. I just subbed to your channel.
@IndustrialPermaculture 4 ай бұрын
Thank you so much for that. I’m loving the scrapping community on KZfaq so much now. There is so much good advice and tips to make our lifestyle easier. Please keep up the good work!
@scrapitall200 4 ай бұрын
@@IndustrialPermaculture it’s a great community, glad you’re part of it.
@pamstreasures3823 4 ай бұрын
Scrapitall what a great idea! Thanks for sharing!
@scrapitall200 4 ай бұрын
Hi, Pam. Thank you for stopping by and watching. Have a wonderful day
@Followerofchrist878 4 ай бұрын
Great job Scrapitall. God bless you!
@scrapitall200 4 ай бұрын
Thank you so much! God bless you too.
@Followerofchrist878 4 ай бұрын
@@scrapitall200thank you!
@ConsuelaAllen923 Ай бұрын
I don't like blades so this is a blessing to see! With any method, you have to build up speed and become more efficient. However, I didn't notice any editing, so it seems like it took you about 7.5 minutes to scrap 2 pounds of copper. That's about $24/hr. Not too shabby at all.
@scrapitall200 Ай бұрын
There was some editing, but I don’t remember how long it exactly took me. But you’re absolutely correct, with more practice it’ll get quicker and quicker. Thank you for watching.
@silver_salvage_savage 4 ай бұрын
That is neat! Thank you for all your prayers and all you do. ❤
@scrapitall200 4 ай бұрын
I thought so too. Thank you for watching buddy.
@teamSHTF 4 ай бұрын
Seems therapeutic. No loud grinder or Sawzall. No dust flying. Easy to shoot a video! #teamSHTF
@scrapitall200 4 ай бұрын
Truth! It was definitely fun doing and honestly I’ll do it again, but I’m definitely a hobby scrapper lol. Thanks for watching!
@rimc8783 4 ай бұрын
To much time scrapping the copper unless your trying to save the wire fore a different project! I will have to say this was a good demonstration on how to save the copper for other projects.
@scrapitall200 4 ай бұрын
It definitely takes more time and I think only hobby scrappers as myself would try it. Thank you for watching.
@saschakonze6867 4 ай бұрын
Hey SIA! Nice new method. since i dont have an angle grinder. Have a great week mate!
@scrapitall200 4 ай бұрын
Thank you, it was fun trying something new! Have a great week too my friend.
@wszechmocnieuzdolniony 4 ай бұрын
❤❤❤ Good job 👍👍👍 pozdrawiam serdecznie z Polski 🇵🇱👍👍👍
@scrapitall200 4 ай бұрын
Thank you my friend!
@JIMCREES1 3 ай бұрын
Hi Scrapitall. Thanks for the great tip. This will save me a lot of time and wok.
@scrapitall200 3 ай бұрын
Awesome, I happy you enjoyed the video. Thank you for watching.
@The.Grateful.Norse1979 3 ай бұрын
Thank you for this and especially for the prayer at the end!
@scrapitall200 3 ай бұрын
You’re welcome! God bless and thank you for watching.
@mikehunsinger8351 4 ай бұрын
Very very cool method!! I usually try to process stuff after work and making less noise and mess is going to be amazing!!! Thank you for sharing!!!
@scrapitall200 4 ай бұрын
You’re welcome! Thank you for watching
@bearhardcorepicker 4 ай бұрын
Used to do this, but as you mentioned, some are difficult to remove, so slicing them tends to be easier and quicker. Always good to have alternate methods, though.
@scrapitall200 4 ай бұрын
Absolutely! Definitely are faster methods but it is fun showing alternative methods. Thank you for watching my friend.
@dumpsterjerry3577 4 ай бұрын
Nice, someone once told of this method but couldn't see what they meant till now lol. That's pretty amazing ✌️
@scrapitall200 4 ай бұрын
Thank you buddy! It’s pretty interesting method for sure. Thank you for watching
@Derbyhobbiescrapper 4 ай бұрын
Will try that out on the motors I have thanks
@scrapitall200 4 ай бұрын
Thank you for watching and hanging out last night with us.
@thomasgabriel2213 4 ай бұрын
Very interesting video! Thank you for showing this.
@scrapitall200 4 ай бұрын
Thank you, I appreciate that.
@HHRecycling 4 ай бұрын
Oh, I see you found some lacquer, too. I'm glad I am not alone. Great video, and maybe I'll give it a try again.
@scrapitall200 4 ай бұрын
I did it with a stator from a sealed unit, the oily winding made it fairly easy.
@HHRecycling 4 ай бұрын
@@scrapitall200 Oh good thinking. I will have lots of those to do.
@scrapitall200 4 ай бұрын
I’m hoping that video will be out next Saturday. You’ll see how it worked. The major downside using this method on them, it’s hard to hold onto anything from all the oil.
@ScorpionMetals 4 ай бұрын
Good video. Never seen that done before
@scrapitall200 4 ай бұрын
Thank you buddy!
@richavic4520 4 ай бұрын
Automatic like. Thanks for sharing shared information. Helping each other out. The way life should be.
@scrapitall200 4 ай бұрын
Absolutely, I 100% agree with you. Thank you for watching.
@joestalin2375 4 ай бұрын
Your video has the best soundtrack! God bless you with long life sir !
@scrapitall200 4 ай бұрын
Thank you so much! God bless you!
@raystone4673 4 ай бұрын
I believe most 230V or higher voltage motor windings, were further insulated by hot varnish and baked. Rewound ones certainly were. This would prevent this great way to get them out. This is a good common sense way to get them out, the opposite way to how they were put in. Good video.
@scrapitall200 4 ай бұрын
Absolutely! I’ve had some motors that were absolutely drenched in varnish and they are a bear lol. It’s fun trying new methods! Thank you for watching.
@joeybowers1502 3 ай бұрын
That was satisfying to watch. 👍🏻
@scrapitall200 3 ай бұрын
Awesome! Thank you so much for letting me know and for watching.
@scraprodriguez 4 ай бұрын
Im speechless 😶 of your knowledge bud!!
@scrapitall200 4 ай бұрын
Thank you my friend. I appreciate you watching and thanks for hanging out with us last night.
@scraprodriguez 4 ай бұрын
And even for us full time scrappers this is awesome. Because if the grinder or cutting tool goes out we’re not at a full stop with the motors.
@scrapitall200 4 ай бұрын
@@scraprodriguez heck yeah buddy! Glad you liked it.
@BushDogScrapper 4 ай бұрын
Well I never thought of doing it that way I gotta say it worked pretty slick! God Bless 🙏🏻
@scrapitall200 4 ай бұрын
Hey there brother, how’s it going? As you know, I love trying new methods lol. It was actually kind of fun doing it. God bless you!
@BushDogScrapper 4 ай бұрын
@@scrapitall200 good morning brother may the good lord bless you today and every day 🙏🏻
@scrapitall200 4 ай бұрын
@@BushDogScrapper praise Jesus for brand new days, for friends, family and hope. I pray you will have a blessed day brother!
@BushDogScrapper 4 ай бұрын
@@scrapitall200 Amen Brother Amen 🙏🏻
@JohnJohnson-dg5yg 3 ай бұрын
You might be a genius. Ty! I just started experimenting with removing copper from motors. Some people knit...I do things like this! Bless you!
@scrapitall200 3 ай бұрын
It’s definitely fun to experiment. Definitely a lot more fun than knitting lol. Thank you and God bless.
@MikeyPipesOrlando 3 ай бұрын
great method! I'm gonna try that on my uncensored channel!
@scrapitall200 3 ай бұрын
Thank you! Uncensored channel?
@KPaul7 4 ай бұрын
I would like to get a winding like that. I did get a ceiling fan, and I cut it by hand. 15.28 ounces. Happy scraping ❤
@scrapitall200 4 ай бұрын
They are nice! Yeah fans are not the heaviest weight in copper, but I like scrapping them. Thank you for watching
@scrapnjunk81 4 ай бұрын
That was cool. Might have try that sometime
@scrapitall200 4 ай бұрын
Thank you buddy! Thanks for watching and God bless you.
@deanjurrens2073 4 ай бұрын
Awesome job
@scrapitall200 4 ай бұрын
Thank you, I appreciate that!
@thebadgeofshame3994 4 ай бұрын
Great Video, Probably not something I'd try doing but I understand the hobby/therapy of dismantling our scrap sometimes it's just for fun not for profit.
@scrapitall200 4 ай бұрын
Absolutely! Thank you for watching.
@scottsome2007 4 ай бұрын
This is a great way to do it to thanks for your time mate i will give it a go Cheers...
@scrapitall200 4 ай бұрын
Excellent! Hope it works for you. Thank you for watching
@MakingBullions009 4 ай бұрын
Great Video!
@scrapitall200 4 ай бұрын
Thank you brother!
@_smithcraft_ 4 ай бұрын
I've found that the ones that are heavily lacored you can take a pair of side cutters and cut the tops of the coils in the center. Flip it over and use a screwdriver or a small pry bar and pull the coils out. It takes a little longer but it also prevents the copper and lacor dust.
@scrapitall200 4 ай бұрын
Absolutely. I even use a machete to cut it in half, works the best imo. Thank you for watching.
@piecesofpete5921 4 ай бұрын
🤙🤙👍🤔 definately gonna try this method 😁✌️
@scrapitall200 4 ай бұрын
Right on! Let me know how it goes buddy.
@michaelmorse6478 3 ай бұрын
Great video!! Amen
@scrapitall200 3 ай бұрын
Thank you so much. God bless you too.
@xiaomim7521 4 ай бұрын
Καλησπέρα από την Αθήνα!!! Ελλάδα!!!😊
@scrapitall200 4 ай бұрын
Hello all the way from Greece. Thank you for watching.
@paullaird7944 4 ай бұрын
Thanks for the tip
@scrapitall200 4 ай бұрын
You’re welcome. Thank you for watching!
@stevecurtis4137 4 ай бұрын
Thank you for the prayer brother!
@scrapitall200 4 ай бұрын
You’re very welcome. Thank you for watching and God bless you.
@CandSMINING 3 ай бұрын
Never seen that done before my friend.🤔🤔Very interesting process.😲😲Not real fast but a lot cleaner than cutting with a cutoff wheel. God bless brother.😎😎⛏⛏🔥🔥
@scrapitall200 3 ай бұрын
Absolutely! It’s fun trying new methods. I try to avoid using the grinder unless i absolutely need to use it. God bless you brother and have a great day.
@napleswolverine7189 3 ай бұрын
Thanks! Yeah! Nice video👍🏻
@scrapitall200 3 ай бұрын
Thank you, I appreciate you watching
@thebeardofgaming81 4 ай бұрын
The prayer earned you a new sub from me! Love it!
@scrapitall200 4 ай бұрын
Thank you! God bless you and thank you so much for watching.
@joeybuldo3008 4 ай бұрын
Maybe not the most efficient way of doing motors, but definitely a cool way especially if someone is limited on what tools they have
@scrapitall200 4 ай бұрын
Exactly! Thank you for watching!
@johnmanfredo422 4 ай бұрын
AMEN BROTHER GOD BLESS YOU MY NEW FRIEND THANKS FOR THIS AWESOME VIDEO!
@scrapitall200 4 ай бұрын
Thank you so much! God bless you brother.
@user-vn7rl3kt2o Ай бұрын
Great video
@scrapitall200 Ай бұрын
Thank you buddy
@bt8143 4 ай бұрын
Prayer is powerful! Thank you brother!
@scrapitall200 4 ай бұрын
Thank you I appreciate you saying that. God bless you brother.
@scrappingonthefly77 4 ай бұрын
Great video Brother
@scrapitall200 4 ай бұрын
Thank you, I appreciate that. Thank you for watching, I do appreciate it.
@nicejunk666 4 ай бұрын
What a cool method
@scrapitall200 4 ай бұрын
Thank you my friend! It’s always fun trying new things.
@nicejunk666 4 ай бұрын
@@scrapitall200 gives me ideas for stubborn ones
@scrapitall200 4 ай бұрын
Heck yeah buddy. It’s nice having many options to choose from.
@stevesrt8 4 ай бұрын
nice one. cheers
@scrapitall200 4 ай бұрын
Thanks buddy. Thank you for watching.
@stevemccann9599 3 ай бұрын
I'm more knowledgeable thx to ur efforts producing this content. Thx so much for giving God all the glory at the end!
@scrapitall200 3 ай бұрын
Thank you, I’m so happy my videos are helpful. God bless you!
@TB-Metals 4 ай бұрын
Never seen or heard of doing it that way. Now I need a motor to tear apart. Great video buddy
@scrapitall200 4 ай бұрын
Thank you, I appreciate it. I hope you find one and it’ll work for you.
@davycrockett6701 3 ай бұрын
This is the way I've always did it, no waste or tiny pieces to gather
@scrapitall200 3 ай бұрын
Awesome! It was kind of enjoyable to do. I like to cut the stator in half with a machete, works so well. Thank you for watching.
@JohnJoe-pf8of 4 ай бұрын
That's amazing
@scrapitall200 4 ай бұрын
Thank you buddy. Thanks for watching!
@JohnJoe-pf8of 3 ай бұрын
You are welcome
@MsDelola 2 ай бұрын
I put mine on vice,use saw zaw to cut 1 side then a flat head screw driver to pull from other side or a pair of pliers.Ive tried all methods and vice wrks for me.Thanks,Im gonna try this and see if I like it.
@scrapitall200 2 ай бұрын
My preferred method is cutting the stator in half with a machete, works so good. This method is more about just trying new things. I’ve done it with two so far but most others it just doesn’t work. Thank you for watching.
@philipromeo8028 4 ай бұрын
Nice job I am never so lucky I always get ones heavy with shalack
@scrapitall200 4 ай бұрын
Bust out the machete 😂 Thank you for watching brother.
@wawerukamau1260 4 ай бұрын
I usually use that method ,but mine is methodically and up to the detail. I remove the copper winding ,scrap the burnt out winding and reverse unwind the remaining winding to a bobbin for reuse in making transformers or rewinding other motors.
@scrapitall200 4 ай бұрын
That’s cool! Thank you for watching and leaving your comment.
@TheTwistedPixel 4 ай бұрын
Great video content. Thank you for sharing. New sub!
@scrapitall200 4 ай бұрын
Thank you so much, I really appreciate that.
@malachi7667 4 ай бұрын
Interesting 😊
@scrapitall200 4 ай бұрын
Thank you Malachi!
@lawrencehalpin6611 4 ай бұрын
Thank you for the prayer. God bless you.
@scrapitall200 4 ай бұрын
You are very welcome! Thank you for watching and God bless you
@michaelprue9024 3 ай бұрын
You can use an air hammer with a wide chisel bit to cut the windings on one side and then pull the rest through the other side. No copper dust/loss and no using up your cutting disks. Time IS money, More time = less money.
@scrapitall200 3 ай бұрын
I use a machete to cut the stator in half, works incredibly well. I’m a hobby scrapper and I just like to show different ways of doing things. Thank you for watching.
@Derbyhobbiescrapper 2 ай бұрын
Going to try this on the next motor I get
@scrapitall200 2 ай бұрын
Awesome, I hope it goes well for you buddy. Thank you for watching.
@ethanwilson1001 4 ай бұрын
Your prayer at the end got my sub. Thank you. Phillipians 1:6
@scrapitall200 4 ай бұрын
Amen to that scripture! Thank you so much and God bless you.
@AliNazar-ow8lz 2 ай бұрын
Thank you
@scrapitall200 2 ай бұрын
You’re welcome! Thank you for watching.
@theaussienurseflipper.8113 4 ай бұрын
Interesting, cheers Graham
@scrapitall200 4 ай бұрын
Hi Graham, how are you doing? Yeah I thought so too. I definitely like trying new things lol. Thanks for watching buddy.
@theaussienurseflipper.8113 4 ай бұрын
@@scrapitall200 I doing great mate, and urself? Enjoying Ur videos. Your prayers at the end are awesome 👍
@scrapitall200 4 ай бұрын
@@theaussienurseflipper.8113 that’s great to hear. I’m doing well, thank you. That’s so wonderful. God bless you.
@Baneslayer Ай бұрын
This is the method I have always used. Remove the sleeves.
@scrapitall200 Ай бұрын
Awesome! Thank you for watching.
@DianaRea-nv8zc 4 ай бұрын
I must go try
@scrapitall200 4 ай бұрын
Awesome! Please let me know how it goes. Thank you for watching.
@DanielHouston-uw3ir 4 ай бұрын
Another good one boss! Keep up the work. You ought to save up a few odds and ends like that for the streams. On another note, the reason i can't see nice junk's videos , they don't come up when i put in the name
@scrapitall200 4 ай бұрын
That’s a good idea! Thank you. Oh really? Try this youtube.com/@nicejunk666?si=c03erUrDPG5EWveF
@martinhertog5357 4 ай бұрын
Madonna: "get into the groove" Scrappitall: " get out of the groove"
@scrapitall200 4 ай бұрын
🤣😂😂 Thanks for the laugh
@stevenpederson1645 4 ай бұрын
That works but is a little slow and fiddly, I have found that a sharp cheap wood chisel, hammer, and a solid surface to work on makes fast work of it. Just shear(chisel) off one end of the windings and pull the remainder out from the other side.
@alanfryer5670 4 ай бұрын
Theoretically yes. In practice it can be a pain in the tush.
@scrapitall200 4 ай бұрын
This one wasn’t too bad for my first time, but I do know there’s plenty this method just wouldn’t work. Thank you for watching.
@PyroThunder 4 ай бұрын
A good way to do this if you don’t have the tools I just buzz the coil on one side then work the rest of the wire out. I have used this method for salvaging the wire for rewiring motors. Why scrap wire that would be expensive new?
@josephcormier5974 4 ай бұрын
Well sir that's definitely different but I wonder how it would work with the ones that are really sealed with shalac this was a lot of fun thank you for sharing this six stars brother
@scrapitall200 4 ай бұрын
Probably not very well, that’s when I bust out the machete 😂 Thank you brother, I appreciate it.
@Man-in-da-shed 4 ай бұрын
lol “ not very well “ is an understatement, errr speaking from experience
@scrapitall200 4 ай бұрын
@@Man-in-da-shed 🤣 I’ve been there too buddy
@focklersd 4 ай бұрын
Scrapitall I appreciate your videos, but on this one I just get a reciprocating saw and cut one side then pry the other side out with a flat head. The pain though is some motors have paper and string holding together so the slow part of cutting all that off takes time. BUT as I said, love your videos brother.
@scrapitall200 4 ай бұрын
I understand it’s not a method for everyone but I do enjoy showing different ways. Thank you, I appreciate that and thank you for watching.
@Daves-hereagain 4 ай бұрын
Question What did you soak that in to get the varnish off?
@scrapitall200 4 ай бұрын
I don’t soak them at all. Some just don’t have much on them. Thank you for watching.
4 ай бұрын
the coil being difficult to remove had a narrower slot maybe from overheating maybe bending open the slot a little with big flat head screw driver might be worth a try i get stuck with odds and ends often simple fixes are not far away thanks for vids
@scrapitall200 4 ай бұрын
Thank you for the suggestion, I always appreciate them. Thank you for watching.
@YAK_INC 26 күн бұрын
What do you do when you find out it’s copper cover aluminum wire? Do you separate them copper from aluminum wire. Or if it’s not a lot do you just add it to the copper pile?
@scrapitall200 26 күн бұрын
It gets sold as aluminum wire. It’s just a super thin layer of copper coating aluminum. Thank you for watching.
@amjmmint4786 2 ай бұрын
haha, this new method is actually the old method, (essentially watching someone wind a stator, reversed) but as we enter an age where goods are going up in price it's a good tip to remind those who might not have the cutting wheel or need to work up to their expediting. I've even gotten to tucking away half-dollar sized 4" wheels just clearing the cutting plane of the tool to finish off eventually with a hand dremel. There is something to the practice of disassembly, time to think, time exploring mechanizations, maybe blowin off steam.
@scrapitall200 2 ай бұрын
Absolutely, it a way it can be therapeutic! Thank you for watching.
@sucker661000 4 ай бұрын
Good method if you don’t want to make much noise.
@scrapitall200 4 ай бұрын
Or make copper dust which is quite dealt to breathe in. Thank you for watching.
Skuller Metals
Рет қаралды 14 М.
Bracken Recycling
Рет қаралды 160 М.
Vicsonvee
Рет қаралды 52 М.