Dude, don't take this the wrong way but somedays I only open youtube to listen to you say "hello youtube", I do not know why but it puts a smile on my face. Thank you for sharing. Greetings from Yucatan.

Blockbuster lost out to online streaming, IKEA are going to lose to Felix Immler’s easy to assemble furniture and clear instructions 😂

Jeder sollte einen Freund, wie Dich, beim Campen dabei haben🤗

Simple, go to nature , be in nature, leave nature with only your footprints left behind. Well done. Enjoy your passion and ideas.

You are a Bushcraft Beast, Felix. That was a lot of work condensed into a few minutes for the video. I would wilt under all of that effort. No small task and you blasted through it like a hot knife through butter. You are the “Bushcraft Beast” for sure. I have seen video reviews that suggest the Venture is not a durable knife for tough bushcraft tasks, but you prove them wrong. Well done, Felix. Well done.

Truely enjoyed this diy & zero cordage build. Felix you are so innovative 🏆 Greetings from Norway

Looks like next week Felix will show, how to build the awesome house with the Ventura! 😊 Have a nice weekend! Cheers from Israel ♨️♨️♨️♨️🔈🔉🔊🛡️🛡️🛡️

Absolutely a great project Felix great job 👍

Quite a stable camp table! You said "Not super stable", but the design is very efficient enough, that to add a couple of cross pieces between the legs at the base, would make it super stable - so, *EXCELLENT DESIGN* !! 🙂

Wow, such a simple concept! I think I'll get out to my workshop this week and make a takedown table like this. Sometimes we make a light supper, chicken salad and pasta, or similar and take it out to one of our favorite spots in the Arizona desert and watch the sunset while enjoying supper. This would be perfect for that. I may even try to figure out how to add a cross piece to the legs to make it a little more stable.

I can barely wait until Fridays arrive to see what you have for us. This was truly a great project! One that I'm going to certainly use. Thanks for sharing.

gewaltig🤗 sehr clevere lösung. unten eine strebe und diagonal verspannen… aber genau so ist er auch schnell wieder aufgebaut und demontabel. geil felix👍

You showed the Venture series and they immediately sold out. I got on a waiting list…a few weeks later got notified but wasn’t able to jump on it right away, sold out again mere hours later. Now I’ve waited many many weeks, no telling when they’ll be in stock! Great project!

Gewaltig lieber Felix! Super gebaut mein Freund! LG Sepp

La scie Felco de Landi, elle m’accompagne partout. Merci pour tes vidéo.

Self clamping legs. An idea I had never even imagined!

Hi Felix! Sehr cooler (Fast-)Klapptisch! Und schön wieder mal zu sehen, wie der Profi "batoniert", 😉😁 anstatt seiner "Schneider" durchs Holz zu prügeln und ihn dabei zu zerstören. Damit ist Deine coole Bushcraft-Essgruppe wohl fertig für ein oppulentes Mahl unterm Himmelszelt. Einfach immer wieder ein Genuß Dir zuzusehen. Auch wenn ich ZU GERN selbst mit dem gei... Kit basteln würde. LG

Hallo Felix, viel Arbeit, aber ein top Ergebnis! 👍 LG Micha

Very inspiring! Makes me want to get out an build stuff. Nice work Felix!

Greetings from Oklahoma USA Thanks for sharing the knowledge

Felix, I like how you always mention any of your setbacks (time drilling, wobbles) and offering potential solutions. Would love to see you shave with that venture Pro knife one day??? All the best from the UK. 🌲 🔪

Phenomenal amount of work but what an amazing result!

Thank you for posting another innovative project.

Wow Felix das war viel Arbeit aber wie immer ein super Projekt klasse Arbeit 👍👍👍 und ein tolles Video danke ❤

I do enjoy watching you work my friend. Thanks for sharing with all of us out here.

Totally useful, absolutely beautiful rustic table.

Congratulations, that's an awesome buscraft table

👋🔥✌️Hello, Felix. Very good 👍👍💪!! Thank's 👌!

Schönes Edit! Grüße aus der Tschechische Republik... 🇨🇿

Fantástico!!!!... Más con menos, cientos de. € en material y sin enseñar que hacer con el.... Es la tónica dominante en muchos videos... Pero lo tuyo es diferente, cada vídeo me sorprendes con un nuevo truco, y más que el truco, en si mismo es la constancia.... Amigo mío un placer seguirte en tus proyectos... Hasta el siguiente, no te canses nunca!!!! ❤

a truly amazing project! I especially like the intelligent use of the wedges to split the logs for enhanced stability same more stiks and paracord for stabilizing crosses might be an idea if you want o keep the table, but then assembly / dissassembly takes much longer indeed

Amazing dude, each video of yours is a surprise and inspiration, you are the best, Greetings from Spain

Good work, Felix. You succeeded!

I want you always in my team! I guess if you want more stability you just need to add some cross bars in the legs. Great job, not just with this table but with the channel. Congrats and greetings from Spain.

Bravo Felix, thanks from dampest England

Fantastic, Felix. Cool. Thanks a lot. 👍😉

Was soll man dazu sagen, lieber Felix? Einfach wieder genial gemacht!👍👍👍 Ganz liebe Grüße aus Oberösterreich!

Super table. 👍 Bravo et merci pour la vidéo.

Awesome project! Thanks for shering it Felix.

well done Felix, Keep them ideas coming along, all your videos and cool, Cheers Ian from England

영어 하나도 모르는 한국인인데, 빅토리녹스 좋아해서 채널 구독까지 하게 되었네요. 늘 좋은 영상 감사해요. 응원합니다.

The card was really great, as always, I am one of your fans from Iran, I have most of the Victorinox knife models, I really love your clips, here in Iran, I do not have access to all your videos, because my filter is not Muslim, I am an Aryan and a free person, hello I am sending you a great card dear friend, good luck always

The table looks great buddy!

Very great job . Greeting from France

Just amazing I can't wait to see what's next

Another great project ..... some optional improvements for table 3.0 ...... with a little more planning you can really "value add" to this great concept. • Help drill to bite maybe you could fire harden the areas of wood you are going to drill? • Taper leg frames out at bottom for more stability ...... could even make them from larger stock and much wider including more cross braces to accommodate bench seats like a park picnic bench (much bigger project! Heaps of functionallity!) • Add more cross members at bottom of table leg frames (you could even use two similar to top end but have optional wider gap space for a different table top height? ..... if you didn't go with the bench seat idea) • Construct leg frame cross members a little differently use saw to create hard shoulder on sockets then whittle/carve dowel ends and ensure they are all same, with hard shoulders (not tapered dowel ends), this will give consistent leg frame dimensions to the construction and if you add a simple twisted double cordage strainer you can make the frames more dissassembleable and more ridgid (if you want tight fit carve pegs square the take edges to octagonal with the flats to hole dimension the octagon corners will be a little oversized but will form tight friction fit) • All done .... if you wanted/needed to increase strength/more longevity for the construction you could add binding/lashing to securely lock in the frames ..... one of the best ways could be to ribbon strip plastic drink bottles and lightly flame to shrink/tighten after lashing Sounds a lot but really are just small tweeks to a fantastic concept that could yield a great outcome.

👏👏👏 excelente! Un saludo!🇦🇷

A joy to watch. Thank you for the great video.

Amazing project! A challenge for you...what about to make such a kind of plane for flatting logs using your knife?

Wow what an awesome project!

That was amazing, thank you so much.

Pretty Cool Idea!! Nice job..🇺🇸🇺🇸🪓🔪👍👍

Great project! A few crossbars would solve stability issues. That would be an easy fix for you. :D

Felix you are too modest! This table would be welcome in my home garden no question. It even folds away for easy storage ;)

Great video Felix.

Felix no deja de sorprendernos con sus excelentes videos. Un saludo desde Colombia, de un fiel seguidor de su canal 👍

Very nice sir ! I need a small table in the woods out by my sawmill. This will work perfect. And will be so cool to build. Thank you very much for this great idea. Keep up the good work.

Amazing Felix!!!

Great work you really done good.

Great build learned a lot thanks

Qu'elle ingéniosité, bravo Félix.👍

Cool table

Very lovely 👍

pretty good table.

Hello 🤝 Very good job 👍 table made of branches

Wow Felix, those wedges did a great job splitting that good size wood that were fairly thick. I’ve got some thick wood that has been cut down on my property. Thanks for the good idea.👍🦾

❤🎉 hello from British Columbia Canada 🇨🇦🖐👍✔❤🎪🎠🖌🎨🌍🏞

Great idea!

nice build

Stylish! Tough job with "simple" tools! Beautiful! 👍

Thank you

Very cool

Super Idee

Great job !

Einfach Klasse, wie viel tolle Projekte Du mit dem neuen Messer umsetzt. Bisher echt gut zusammengestellt!

Excellent video mate, your ideas are exemplary 👍👍👍

I love your content, when I look at furniture projects like this, I can't help wondering if you might not be better off making better tools? Maybe make yourself a brace to use the flat bit more effectively/easily. I did some projects with a hand auger, and with a brace and bit... the brace and bit romped home as the winner.

Greetings Felix. Funky music, funky bushcraft table, and life is good! Very cool project. Always fun and inspiring, thank you.

Wauuuu, buen trabajo como siempre, 👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽saludos desde el canal "Sólo tallas..y algunas cosillas más"

Good project Felix, thanks for sharing, God bless my friend !

Another great project Felix, Love the table

Great job that table looks great!!!!

Hi, Felix. Somehow I overlooked this video when you first posted it. I love this concept for a bush table! AND it's a takedown design! Super! I'm a little surprized that the screw of the bit tore out of the wood. Those bits are used to drill through pine boards for routing electrical wiring all the time, and I'm pretty sure that pine is softer than Birch. When you say the wood is too soft for the screw to pull the blade through, are you saying that it tears out just near the END of the hole or does it tear out in the middle of the hole also? If it is just at the end of the hole, I have two suggestions. Perhaps you could start the drilling on the curved side of the split log and lay the flat side hard against another flat board for support. That would allow the screw to engage the second board as it emerges from the first board and that might pull the blade through. The second idea is to drill the holes before you split the wood for the legs. That way you would easily get four holes in two of the legs (after splitting), and only have to struggle with the four holes formed by the exiting drill on the other half of the log, instead of all eight holes. If the exit end of the hole is NOT what is causing the problem, then my suggestions are worthless. Maybe honing the cutting edge of the drill bit would help or using a spiral bit instead of a flat bit. A spiral bit will still cut well, even if the screw tears out, so long as you can apply downward pressure. I'm really enjoying the Venture Project series. Ciao!

That was a tough job, but it sure turned out well! I just can't learn enough from your videos. They great learning shows.

Surely Venture series looks great and its features are well designed, and your creativeness and skills are ever so wonderful. But I wonder, is there some remarkable tasks that the Venture series knives can take, but that the regular 91 mm SAK’s cannot handle?

Muy linda construcción Bushcraft Yo hice una parecida, está semana la subiré al canal

Nice work as always Felix. If you press down on the table while using the side of your foot to spread the legs outward, it will stabilize better. Baton them down too and it should be rock-solid.

the is awesome bud

Hi Felix, I really enjoy your videos, thanks for putting in the time. A suggestion sir, please avoid adding music. I’d much rather hear you narrate or just the sounds of your tools vs some repetitive elevator music. Thanks again.

Muy buenas amigo mío que decirte has hecho una mesa fantástica el esfuerzo a merecido la pena buen trabajo 👌 saludos 🇪🇦

Maybe Victorinox should make a camp axe to go along with the new knife

What a great project!!! Well done! Can you tell us about that knife sheath / kit you showed please?

@Feliximmler I have been wondering if you coppice hazelnut trees to get all those straight round poles you use. I know that tree has a nice growth habit but you have such a ready supply of them. Could you show us that in a future video?

I am planning to build myself a cottage, are you available this weekend? Great project Felix, congratulations

Ich habe schon Schwierigkeiten einen IKEA-Tisch richtig zusammenzubauen. Ich hoffe, du hast den Muskelkater von dieser schweißtreibenden Arbeit, bereits auskuriert. Gruß Karl

Nice work How long did it take ?

Great video! I think YOU could have done it all with a huntsman! Sorry to say my Venture pro doesn't make it outside much anymore. I use it too much in the kitchen.

Brilliant! And it looks like the Venture Pro did a great job! How did the edge hold up Felix?

Ich will auch so ein Messer! Wann gibt's die endlich wieder? 😩

I always carry a Machete, it makes short work of projects like this.