Hi Rich, correct me if I am wrong but looks like it is not worth to replace that parts if You already have M2C parts? I checked the price and they are not cheap and additionally it is only 60 grams for the whole car. I believe that You collect more weight from rocks and sand during driving 😁 In that case the only significant factor is the durability, I can't wait for Your thoughts about what is better, M2C or Basherqueen

@@danielnoname8352 Hi Daniel! Rich upgraded the Anniversary Outcast with had the standard Aluminum Towers. My Carbon Fiber Towers are definitely stronger then the stock once or Towers from 6061 Aluminum (HR, GPM etc.) . For sure the 9mm 7075 Towers from M2C are stronger then mine 5mm Carbon Fiber once, no question. I make the parts for me and the community in my little workshop/office for better durability and better look (who likes it). Over all weight reduction is always a plus because it takes stress from all other components. The price comes from really high quality Carbon Fiber (no cheap CN s***) and that fact that I make them in only small quantity. Thanks for stopping by my eBay Shop and Happy Bashing!

Rich, Great bash session. Thanks for sharing and those parts are awesome looking. Kimberly is making a great product and I’ll be sure to pick up some “bits and bobs” (as Talbot might say) Carbon isn’t cheap and her pricing is very fair. I was actually expecting the pricing to be a bit higher. I just M2C’d my Notorious, but need a few parts for my EXB. Looking forward to more videos from you, and bits from Kimberly.

@@GRIFFINLEVEL3 Hey Jason, you are very welcome to to by my Shop! 👍

@@Basherqueen hi Kimberly, please do not understand me wrong, I am not complaining about Your parts, I appreciate people like You as I think that such quality of aftermarket parts is one of the best thing in this hobby - thanks to this, sky is the limit 😁 I am sure that Your parts are no comparable to the stock ones, it is probably a totally different level of materials and engineering. I just was wondering if it is worth to buy it if the car is already 'bullet proof' because I was expecting hundrets grams less, rather than tens. I have no knowledge about materials and for the layman carbon fiber is associated with the exceptionally light stuff. That's why 😂

Thanks Kev, means a lot too me! 😘 to you UK guys!

No doubt Kevin 🤗. I'm super impressed 👀. Kimberly leads by example with quality and obvious passion for what she does 😍

love your channel Kev can you do a video on the new 3s blx senton

Great Products! Will we se some Carbon Fiber for the Mojave too?

Thanks so much for the opportunity Kimberly 😍. Perfect fit and finish and attention to detail 👌. I think they're a great option, especially for anyone wanting to shed grams. Love the glove like fit of the towers and the precision fit of the top brace 👀. I'm super impressed with both your innovative work and dedication 🥰🥰. Like I've said many times, we're all very lucky to have you in the hobby 😘😘😘😎💪👊👊

@@rcpitlane2283 Yes, I am working on them too.

Are you only selling stuff on eBay?

@@derekquinones8614 So far I use eBay only. What do you need?

Thanks so much Brother Eric 😜. Kimberly did a great job with the parts. Absolutely perfect fit and M4 holes where it counts 👍. Super impressed they took that roof lander. I gotta tighten that power switch up. She's definitely a light and agile little Ripper. Not the best for a rough construction site, but she did good 🤗. The shocks feel pretty good, but I'll probably swap on the ZRS setup to keep her more planted. Really appreciate it Brother. 🍻🤙🤙😎💪👊👊

Thank you Claire for all the love and support! 😘 to the UK guys!

Thanks so much Brother Chris 😜!!!! I noticed awhile back how agile this sucker was with the Speed chassis and Backflip LP's 🥰. Feels ultra precise at the skatepark. Kimberly's CF parts add to that agility 👌. This rig is a hyper Ripper no doubt. Very challenging to keep the nose down 😂. Especially on the street once the LP's stick. I'm super impressed the towers took the abuse 👀. That same type of hit destroyed my Tekno MT410 CF towers 💩🤣🤣. Really appreciate the kind words as always Bro. Looking forward to more Killer footage with your new ramp 😱🤙🤙😎💪👊👊

Thanks so much Brother 😜!!!! Quick run got extended a little bit 😂. I gotta say, just haven't been getting the bash time and stress relief I need lately. Felt awesome to use up the sunlight 😍. Going home with no breakages is always a plus 🤗👍👍😎💪👊👊

Thanks so much Brother 😜!!!! I'm glad the video came out ok with the sun setting 👀. Sometimes the GoPro blacks out in low light situations. You're absolutely right about weight Bro 👊. Grams make a huge difference with every RC. Really appreciate your comment my friend. 🍻🤙🤙😎💪👊👊

Thanks so much Jason 🤗. Kimberly did a wonderful job with these upgrades 👀. Things got rough and the parts hung tough 💪. They feel right at home on the Limited Edition. Much appreciated Brother. 🍻😎💪👊👊

Thanks so much Rey 🤗. This lighter Outcast is a Blast 😍. Takes a bit more focus to bash because it's faster and noticably more agile. I'm truly impressed with the Basherqueen parts 👀. Great option for a lighter set-up 🍻😎💪👊👊

Thanks so much for the warm comment Brother 🤗. Kimberly is taking the CF options by storm 😱. Hats off to out lovely 100% unofficial Basherqueen 🥰🥰😎💪👊👊

Thanks so much Brother Dennis 🤗. Had a Blast despite the strong headwinds blowing this lightened setup around 🤣. I wanted to shape up the mounds, but had to go gangsta with security eyeballing me at the construction site. Just glad they didn't boot my ass outta there😂. It's Crazy but I didn't break a dang think besides stripping my original rear body mounts. PS, I finally covered up the Death Rock 😱 and cut down those bushes I kept crashing into after the Mega gap 😝. I took another hard look at that boulder. It's shaped about perfect for maximum carnage 👀. Hope e is well Bro. Appreciate the kind words as always. 🍻🤙🤙😎💪👊👊

Thanks so much Brother 👊!!!! I'm very impressed with the durability of these CF parts 👀. It was a pleasure fitting them up. Kimberly was very precise with the design and fitment 😍. Appreciate the kind words. 🍻😎💪👊👊

Thanks so much Chris 🤗. Kimberly uses the highest grade CF available. I broke Teknos CF towers very easily 😝. Designs plays a huge role with strength, but material is absolutely key.

Thanks Brother 👊. Happy bashing!!!! 🍻😎💪👊👊

Thanks so much Brother Aaron 😜!!!! I could take it further with lighter RPM arms and Mitch's prototype driveshafts 😱. The shafts are literally feather light compared to stock. He's altering the design of them at the moment. Just waiting to see the final test batch. Kimberly's parts fit perfectly 👌. Super impressed thus far. Might not have the ultimate strength of beefy 7075, but they can flex without losing form and passed a pretty hard durability test 👍👍😎💪👊👊

Hey you! Thank you so much! 👍

Thanks so much Mike 🤗. The new parts did great 👍. I'm not sure on total height, but they get pretty far up depending on speed and what the wind is doing 😱. I was jumping into the wind for most of those gap jumps at the end. It has a major impact on both height and distance you can achieve. 🍻😎💪👊👊

Thanks Brother 🤗. My buddies have been trying to get me into crawling for years 👍. Looks like a Blast. Definitely gonna have to try it sometime. Really appreciate it my friend. 🍻😎💪👊👊

Hey Nick, so far no plans to make a wing mount. I use the RPM Wing mount and haven't broken one yet.

Thanks so much Justin 😊. I'm still shocked about this lightened Speed chassis 👀. Only 280 grams. The Basherqueen CF seems legit. 🍻😎💪👊👊

Thanks so much Lucas 😊. Kimberly does awesome work 👀. She uses top grade CF no question. 😎💪👊👊

Thanks so much David 🤗. Yes indeed, Kimberly's parts are quality 😍. Very impressed with them Brother. You know I have to get close to stay focused 😂🍻👍👍😎💪👊👊

Awesome! Thank you! 👍

Thanks so much Javier 🤗. Really appreciate it Brother. 😎💪👊👊

Thanks so much dear Brother 😍. The Outcast will never get old 🥰🥰🥰. The Basherqueen parts are holding up great 👀. Hope all is well my good friend 🤗👍👍😎💪👊👊

@@richduperbash2966 yes my dear friend, all good..the cold are saaaweeping in over sweden..try to bash today 🥰

Thanks so much Brother Ed 😜!!!! Not gonna lie, this lighter set-up is super touchy 😱. Pretty challenging to get the nose level for landings. That roof hit was indeed harsh 🤣. I forgot this switch has shut off before on landings. Never on a takeoff before though 😝🍻😎💪👊👊

Might be worth showing positive and negative and wiring together? Keep the set switch that way

Hey Jim 🤗. Kimberly's parts have absolutely perfect fitment, made from top shelf CF 👍. Extremely durable no question. Between Basherqueen and M2C you're left with a very durable rig. Really as good as it gets for bashing. Hope all is well Brother 🍻😎💪👊👊

Thanks so much Brother 👊. I've heard it does help. Much appreciated 🍻😎💪👊👊

@@richduperbash2966 Old school late 80's early 90's trick lol

Hey you! Yes, I make the whole set for the Limitless and Infraction. kzfaq.info/get/bejne/e9KflaSEt8vRn5c.html

@@Basherqueen Good stuff Kimberly. I really like the carbon fiber shock towers, ackerman plate and servo plate. Keep up the good work.

Thanks so much Stevo 😜!!!! Hope all is well Brother 🍻😎💪👊👊

Thanks Jordan 🤗. You can definitely feel the weight difference. The rig is far more agile and responsive👍. Definitely takes getting used to, but super fast and fun. My other rigs are M2C beefed out too 💪. It's great to have options at the end of the day. Kimberly explained it well in her comment and replies 🍻😎💪👊👊

Thanks Brother 🤗. Yes....I'm interested in the new 3s rigs. Just a matter of time I think. 🍻😎💪👊👊

I was fighting a horrible migraine when I posted this vid 😝. Really appreciate it though Brother. Feeling better today. Bash on my friend 🍻😎💪👊👊

Thanks so much Christopher 🤗. I wouldn't sweat it one bit Brother 👍. Like Mitch has mentioned, it's not uncommon for the press to slightly bend a chassis during production. While not impossible to bend one bashing, it's very uncommon, especially if running proper bracing and keeping your hardware snugged down. It's normal to have some healthy slight flex too. It helps with handling and absorbing impacts. Aside from tagging a solid object full speed (curb, pole...etc) you can expect the chassis to take brutal bashing and just keep going. 🍻😎💪👊👊

@@richduperbash2966 thanks Rich that makes me feel better about it. I was using the gpm center braces but just purchased some M2c ones. So the truck should be pretty solid. Thanks again for your wisdom and responding to comments, it is very helpful 🙏🏼👍🏼✌🏻

@@christopheralan6474 you bet Brother 👊. Happy bashing 🍻

Hi Speedy. Carbon Fiber and Carbon Fiber are nor the same. My stuff is made from industrial grade Carbon Fiber made in Japan. Good stuff!

Kimberly Sanches that’s cool! Good to know! Thank you!

I would pick the Talion personally 🤗. The XT-E for racing no question. The Outcast is MAD fun, but the Talion simply Rips 👀. 🍻 😎💪👊👊

I've seen it. Bummer the price is so astronomical 👀. Guessing it'll come down once there's enough competition in the marketplace. 😎💪👊👊

Thanks Brother 🤗😎💪👊👊

It's true the weight loss from the CF parts was negligible. However, the collective weight reduction is very noticeable with the lighter chassis and wheels. Reducing top weight makes a big difference in handling and overall stability. The CF towers also don't bow forward after enough hard landings like the stock ones. They keep their form. We'll see how they hold up over time. 😎💪👊👊

Thanks so much Ian 🤗. I run an 18T with the smaller Backflip LP's. 🍻😎💪👊👊

@@richduperbash2966 thank you. So impressed with the stock blx system on 6s

@@ianbudgetrc2574 I'm very impressed with it too Brother 🤗

The M2C chassis adds around 100g over the stock chassis. Obviously CF is far lighter than 7075 and extremely resilient when high grade. Low sprung weight can be desirable depending on terrain and driving style though. 🍻😎💪👊👊

I don't think so, but Kimberly would likely consider any suggestions 👍. She's open minded and very skilled. 😎💪👊👊

I use mostly Hobbystar 5000mah 100c 6s single hardpacks with EC5 connectors. I'd also check to see if you're connectors or wires are getting Crazy hot 🤔. A bad solder connection can put a major strain on the system. 🍻😎💪👊👊

Hey Carlos 👊. The Basherqueen carbon fiber parts have done excellent 👍. No breakages despite some very hard dirt and skatepark bashes. Still running the Lightened M2C speed chassis. Only weighs 280g and is hanging tough. Not as strong as a Goliath Series 4mm, but stronger and lighter than stock. I'll try and link you. 😎💪👊👊m2cracing.net/arrma-on-road-234-model/459-m2c-3221-arrma-outcastnotoriuos-speed-chassis.html

Thanks so much Brother 🤗. I'm really hoping my RC time will free up more soon. Have some family commitments and home projects going on. Really appreciate it. 😎💪👊👊

@@richduperbash2966 I have a KZfaq channel that I am starting to post on I wanted to make it on my Armor Typhoon buggy 3S but it is broken so I’m taking it to a hobby shop to get it fixed they have the parts for it I do not

My KZfaq name is skater noob 25

Not sure on a number rating, but I've yet to bust any Basherqueen parts. I'd say they're very durable. Kimberly uses only high grade CF. 🍻😎💪👊👊kzfaq.info/get/bejne/f5Oni7aq39G6YZs.html

I run stock diffs with Mugen Seiki shims. Also add Tekno #1222 shims on the crown gear side bearing. Running 50/200/20k front to rear diff fluids.

I'm still running 50/200/50K front to rear 👍. 100k center works well too. The eb48.3 is so light, might try 100k first 🤔🍻😎💪👊👊

@@richduperbash2966 I agree. Keep it quick and still take some long bash runs without burning center diff , thanks 👍

@@richduperbash2966 glad ur doing good Rich. Ur a solid dude, I remember when we u used to help me years ago. Awesome to see how much ur channel has grown and u deserve it 👏, thanks again 😊

@@midwestboss8808 thanks Brother 🤗. Just doing my thing having fun with the hobby 🍻

Yep 👍. It's the Typhon Basher 6s model. I run them on basically all my 6s rigs. 🍻😎💪👊👊

Probably not 🤔. Nothing against the truck, just not super interested in the platform. Most people love their Mojave's though 🍻😎💪👊👊

LMAO 🤣. I totally hear you Brother 👊. Take your time and be patient with yourself. Things will feel more natural with practice 😉😎💪👊👊

It's done absolutely Killer. No chipping, cracking, or lamination issues. Kimberly uses premium grade CF. I'm super impressed. 😎💪👊👊

@@richduperbash2966 Nice! Ya I picked up a set bout a month ago for my backups when my current towers (Just bash it Rc) tap out on me. Happy to hear they are still duperbash approved. Luv u brother!!!

I was using a Hobbystar 5000mah 100C 6s single hardpack from RCJuice. 🍻😎💪👊👊

Yep 😝. Always sucks when a good spot disappears. 😎💪👊👊