Thank you so much for this video. I was quoted several hundred dollars to install this gate opener. I watched your video a couple of times to walk me through the process. TODAY I DID IT!!! It's working like a charm.

I'm seriously looking to install this system myself. I'm tired of having to manually open the gate lol. Your video was very well put together. I feel that I can do the install myself after having seen this video!! My gate is a 14 footer. Tube, like yours is.

Bless you. I just bought the 371W and was trying to watch the videos from Mighty Mule.. They were terrible. Your walk through really helped. Will give it a try tomorrow.

Great walk through of this installation project. Getting ready to dive into a very similar installation. Thanks for posting! BTW, you gotta great set of tools and supplies to do the job right! Every time I buy a new tool or piece of equipment needed for the job at hand, I have to justify it to my domestic accountant 😉

You gave the best video. Even better than the manufacturer. You helped me do the arm setting and button setting. Thanks again man.

Thanks so much. The video by Mighty Mule was somewhat confusing to me. You did a great job!. I will be installing mine on Saturday.

In my day we didn't have electricity, and had to get out of the car each time we wanted to open or close the gate. :)

Thanks for the info, helped me install mine easier.

You're the best! That was extremely helpful! Thank you sir!

Awesome please make next video I can’t wait to do this thanks so much

Great job love the chickens

thanks for the walk through

Thank you. New subscriber. 👍

Doc White's New Yankee Workshop!!!

Thank you!

I watched this video because I hooked up this gate opener for my in-laws and for some reason it wasn't working and I did the exact same things you did so I'm confused lol... time for trouble shooting I guess

Awesome video. Can show us how you connected the battery cable to the battery ?

This is kind of like watching an episode of "Mission Impossible" or "Leverage".

could you do a clip on the pull up car opening way? great informative clip....

Great video. I already installed mine without your video. I did have some trouble but figured it out. My question is how does the automatic closer get set? I see the dial do I move that or leave it? I haven’t seen videos on this yet. Thanks

In order for me to put the battery wires I had to take out the seal and push it back in after I put the wires in the box. Just remember to have the seal around the wires much like the seal cap. Need the seal.

very helpful. i'll probably be installing that same model soon myself. does the "whitehouse farm" refer to the town of whitehouse, texas, near tyler?

Had the same problem with the battery cables not fitting through the pass through.. and, with the connectors to the battery.

Will the mighty mule work IF there's no battery and it's just connected by the solar? I have done these steps and it will not work. Thanks,

Installed one today. It won't learn the transmitter. So I'm stuck there. I did everything you showed.

Hello friend, I bought the same one, I assembled it today and it is extremely slow, you can barely see it moving, could you help me?

Nicely done Doc! Could use some lube to get it in, or try spitting on it 🤷‍♂️, lol

good advice 3 feet off the ground for the control unit but explain why thanks

Do you know if there is a way to add a push button to the control box to open and close the gate?

what size gate clamps did you put on that gate. We keep getting the wrong size at Tractor FS. That is the same gate we have. I am tired of this gate opener already.

Thank you! Question: where did you get the correct connection pieces for hooking to the mighty mule battery? Mine came with the standard ring-style attaching mechanical. I don’t see anything about this in the instructions. Thank you

Does amazon or mighty mule offer the extension wire for your solar panel, or did you source it locally? What gauge? Thanks~!

Did you enclose your battery into some type of box or just set it on the ground by the tree?

is your sound cutting off and on at about 15:00-> ? Also is the teardrop shaped post bracket hinge an actual hinge that is supposed to move or do you tighten that down at some set angle tight enough so it doesn’t move? this may seem like a silly question but it’s the shape of it that makes me ask.

Do you know if your old remotes work on the new arm?

I installed mine as a push to open and the directions you showed are in the book for setting the open limit. But there are no instructions in the book on setting the closed limit and the gate is not closing all the way. No video on the push to open, so if anyone knows how to do this please share. Also, I see a reset button in the box, but not sure how this works to reset the system, as I have pressed it and it doesn't do anything.

Thank you for sharing this video, My MM360 went dead because of the water/rain now I am looking into getting the MM371W, But my concern is with the old parts -Remote (FM135)-Digital Keypad (FM137) & the Vehicle Sensor (FM138), I have posted the question to see if the are compatible with the MM371W, I am still waiting for an answer from Mighty Mule, do you think they will work with MM371W? Thanks

Can you add a bigger watt size solar panel than the 10w included in this package?

So, we are still having an issue with the gate limit parameters. I have followed the instructions numerous times and yet it still opens too far, hits the fence and immediately closes again. The only way it won't open too far is if I hit the remote to stop it before it hits the fence. We were able to set the close limits okay, but it opens too far and hits the fence. Any ideas? Thanks.

Are those muffler clamps you used to reinforce on the gate? What size did you use?

Bro whats the name of the attachment you used at the end of the wiring to attach the wiring to the battery?

I did this exactly the way you did it but mine opens back up after 30 seconds,can’t figure it out

the 371w calls for an automotive or marine battery, I see you list the regular 7ah battery, how did that work for you?

I just set up my opener...kind of miss the older version where the "brain" is located in the "arm" of the unit and not separate. My question is: when the gate is open or closed, it beeps....is there a way to bypass or stop that beep? My older Mighty Mule does not beep....any suggestions?

What battery did you buy and what cables. Did all the first of your video but haven't bought the battery and you mention you had to change the connectors?

hey man that battery harness was for a car battery.

Where is part 2? Just want to know how to program the old remotes to the new opener.

I assume the control box has a built in solar charge controller correct?

I saw all the steps you did but you do not want to open with the remote control when I press the open button it runs like 6 inches only and it starts to sound a loud sound

Does the new MMK200 wireless keypad work with the old MM360 gate opener?

Again I well, everything had been fine working I did it as he told me and it worked well but today I wanted to close it and it no longer wanted to work with the control and it has a sound like every 10 seconds like a smoke alarm a sound every 10 seconds

We can't get the remotes to work. It opens and closes manually. What are we doing wrong?

Anyone else have range issues with the remotes? We have three remotes and ever since install you have to be about 10 feet or closer for it to communicate. Any suggestions? Thank you.

Hey I have a question I don’t know if my remote ain’t connected or what I connected everything and tried programming I get all the beeps and everything and click open and does nothing I have been there like 4 hours and can’t figure it out

How wide is the fence ?

After #2 years how it working ?

how do Grampys get in?

We just installed the 371W and it closes but when it opens it immediately closes. We still have the auto close off. Help!!

Anyone have problems with it opening bye itself (phantom opening)

Anyone have problems with it open bye itself (phantom opening)

Why did you not show the wires from the battery to the control box, your video cut that part out ? Very informative though. Thanks

Your gate bracket is on backwards

Need help

Look closely at the diagram on pages 24-25, as this step on page 25 works perfectly as expected/described with no errors. **Automatic Gate Lock (FM143) NOTE: A wire jumper is required between 'LOCK V-' and 'LOCK Relay Common'. The additional circuit board is not needed. Also, the reason many folks have isses configuring the MMS100 is because the manufacturer failed to include internal parts/(an adapter) that completes the connection on both antennas, (MMS100/Main Control Box). If you call them, they will help troubleshoot and send this out free of charge. They will text you a clickable link that allows them to access your smart phone camera and see what you see. Hope this helps everyone. www.mightymule.com/wp-content/uploads/10022114-A-MM371W_372W_WEB.pdf I wanted to include a zoomed-in view of this configuration, but not sure how to achieve this on YT.

Anyone have problems with it opening bye itself (phantom opening)