Installing H2 Hummer SUT cab marker lights

Рет қаралды 12,200

Күн бұрын

Hummer Chronicles ep. 7 (Installing H2 Hummer SUT cab marker lights)
In this video I present to you new content, I’m giving you all full upgrade view of my personal vehicle. These videos will be like my own version of your average television shows, they’ll be uploaded in episodes showing and teaching you ways to enhance the look of your vehicle.
My new content is called “My Hummer Chronicles” and this is episode 7 (Changing out the crew cab lights). I figured since I’m always showing me painting and customizing vehicles why not invite you inside my ideas for my vehicle.
This will pretty much show another side to my channel and give you ideas that’ll make your vehicle stand out from that old stock look. Out with the old, in with the new.
I wanna give a special thanks to those who’ve subscribed and shown support, I also would like to thank KZfaq for allowing me to share my dream.
For more log-in to checkout our other social media sites.
Facebook: Devaren McCall
Instagram: newtouchauto
Listed below is where you can purchase your new crew cab lights from Amazon
www.amazon.com/Partsam-264160...

Пікірлер: 53

@synclairbear2457 Жыл бұрын

love the video, helpfull to see how the lights are removed. although im curious why you didnt take the opportunity to re seal the internal grommet with rtv or silicone while you were there as these are the main reason the lights tend to leak.

@newtouchauto Жыл бұрын

Thanks and you are definitely correct, I ended up sealing them on a later date after noticing the leaks still occurring. I appreciate your input regarding the additional work needed.

@joshuagarciajrg 2 жыл бұрын

Thank you for the videos. Finally got an H2, and want to do upgrades like this.

@newtouchauto 2 жыл бұрын

You’re welcome and thanks for checking out the video. If you’re anything like me upgrades are a must, gotta stand out at least a little.

@twogunsforme1 5 ай бұрын

Good job thank you!

@newtouchauto 5 ай бұрын

You’re welcome and thank you for watching the video.

@HummerGabor 10 ай бұрын

Sir. You save my life! Thanks for helping!

@newtouchauto 10 ай бұрын

You’re welcome, after filming this video I did notice that the water leaks still existed. Here’s what I found to be helpful and stop the leaks, by using a waterproof caulk seal on the outside of my lights I no longer have leak issues. The 4 lights on each corner will be where the water is entering, at the top where the roof rails slide is where the water builds up to leak inside of the light housing. What I did was caulk around the outside of the 4 lights eliminating any entry for water to enter. This is why you may be experiencing a lot of tree debris inside the light housing. I used Dynaflex Ultra from Lowe’s, it’s designed for windows, doors, siding and trim leaks.

@HummerGabor 10 ай бұрын

@@newtouchauto Dear Sir! I have a lot of quastions. This is my first (and last) Hummer. I keep it rest of my life to end. Do you have a Facebook or e-mail ? If am not do distrub you?

@searcher3x 2 жыл бұрын

I'm not a fan of trucks, SUV's and the like. I do always appreciate how clearly you demonstrate how you do things.

@newtouchauto 2 жыл бұрын

I use to be the same way about trucks and suv vehicles until I purchased one for myself. I’ll say this though, it’s a must that I have a some type of truck lol

@scottfranson4215 4 ай бұрын

More 5* s Video`s Please good Knowlage / Need to know .

@moziahwheels Жыл бұрын

I was going with clear/white marker lights. You helped changed my mind. I’m changing them to amber again but LED. (The Law) I guess lol

@newtouchauto Жыл бұрын

I’m changing mine also to LED, they light up better my opinion

@biglathearingthemosthigh Жыл бұрын

thank you brother just what I was looking for. Very helpful!!!

@newtouchauto Жыл бұрын

You’re welcome and thanks for watching the video. I intend on doing an update video bc there’s another step that’ll be needed. You’ll need to seal around the inside of each light with a water sealer. Something such as loctite or any weather sealer.

@glamourgoddess4683 2 жыл бұрын

Thanks for showing this. Good job.

@newtouchauto 2 жыл бұрын

You’re welcome and thanks

@krystopherfischer2919 Жыл бұрын

WOW great job. Im thinking of getting a H2SUT so im looking at the pros and cons. Your video is very helpful, thank you.

@newtouchauto Жыл бұрын

You’re welcome and thanks for watching the video. The H2’s really are some historical vehicles, everywhere I go people smile and look as if they never saw one.

@kianustarr 2 жыл бұрын

Your videos are really helping, thanks for the assist.

@newtouchauto 2 жыл бұрын

You’re welcome and thanks for checking out the video.

@JXVI 11 ай бұрын

Thank you for the simple and to the point video!

@newtouchauto 11 ай бұрын

You’re welcome and thank you for watching the video.

@TunersCanvas Жыл бұрын

Nicely done. Looks great.

@newtouchauto Жыл бұрын

Thanks I appreciate that

@LCLj73 2 жыл бұрын

Great job

@newtouchauto 2 жыл бұрын

Thank you, more on the way

@Pete-12 Жыл бұрын

You’re a wealth of knowledge! Thanks for all your help brother!

@newtouchauto Жыл бұрын

You’re welcome and thanks for watching the video

@jesseparadis6141 7 ай бұрын

Just letting uk you missed a step....

@newtouchauto 7 ай бұрын

@jesseparadis6141 I’m sure I did 😂 thanks for watching the video.

@jhh70 Жыл бұрын

really helpful

@newtouchauto Жыл бұрын

Thanks for watching the video. I intend on doing an update video bc there’s another step that’ll be needed. You’ll need to seal around the inside of each light with a water sealer. Something such as loctite or any weather sealer.

@rayjohnson4287 Жыл бұрын

Nice shirt my G. Thanks for the info

@newtouchauto Жыл бұрын

You’re welcome and thanks for watching the video. I have since then changed my logo and there available along with other t-shirts on our website www.newtouchauto.com

@amantara511 Ай бұрын

Nice video. Did as you showed. Gap still existing in 2 out of 3 lights. What to do? Pls advise.

@newtouchauto Ай бұрын

I actually ended up using a waterproof caulk sealer, you should be able to fill in any gaps with that.

@darrelldarrell1447 9 ай бұрын

The biggest leak is under the cowle. There's a giant hole they covered with a rubber flap and the glue breaks down so water runs down the windshield and right into that hole and behind the dash on the passengers side. It's a pain in the ass to fix.

@newtouchauto 9 ай бұрын

Thanks for your input and you’re correct.

@scottfranson4215 4 ай бұрын

Seen a Video on YT about that , Ok It needs to be done. Thank You ,

@terencethompson729 Ай бұрын

Ok, ok I didn't know this, I thought the water was coming from the sun roof drain holes.... Something has clod up my drain holes, i got to find away to unclod both holes.. thanks for the video...i was hopeing you show us what those clear light lens look like in the dark....I was wondering are they're brighter than the color lens...

@newtouchauto Ай бұрын

You’re welcome and yes they’re brighter than the original bulbs. I’d suggest that you go with LED lights instead bc they’re a much brighter option. When it comes to the leak I found it to be more than what I display in the video, actually you’ll need to seal the inside with weather resistant caulking. I used black outdoor caulk to be exact. Your drain system can definitely be clogged up though, if you have the SUT there are a few areas they’re located. In the trunk area under the vents are the main for the bottom and the top will be under the big 4 corner lights.

@lordfashion9892 2 жыл бұрын

me, i am experiencing that

@newtouchauto 2 жыл бұрын

After filming this video I noticed that there’s more to it You’ll also need to add some type of liquid sealer around the plug that holds the light bulb, that’s where the leaks are coming through.

@EffectMethod 9 ай бұрын

You got a video on the rear side marker lights SUT?

@newtouchauto 9 ай бұрын

Yes and thank you for watching the video, here’s the link below kzfaq.info/get/bejne/fbmEisuEqKzRZWg.htmlsi=fh57k-aNekyd4FUc

@Astinsmorphs Жыл бұрын

Curious if you had anymore leaks after this install

@newtouchauto Жыл бұрын

Actually I did, my intentions are to do a follow up video. I found that the leaks are coming through the rubber plugs that the lights are connected to. You’ll need to purchase any brand of all weather seal, apply the product around the exterior of where the plugs sit, seal and give it time to dry before putting the lights back together.