Next Generation of 3D Printing: First Look at Centauri Carbon, K2 Plus, Prusa XL & More!
Рет қаралды 66,540
Күн бұрынRAPID+ TCT was insane! I've never been to an event like this and while I wasn't able to capture everything at the event, I DID grab some footage and information on the New and Upcoming machines I'm sure you all are going to have questions about! From Bambu, Elegoo and Creality to Prusa, FLsun and More! Let's take a little peak at what the Industry Leaders and Underdogs have cooking!
▼ Current& Upcoming 3D Printers!
Bambu Lab A1 Combo - shrsl.com/4bmtb
Bambu Lab P1P - shrsl.com/4bmtc
Bambu Lab P1S - shrsl.com/4bmtd
Bambu Lab X1C - shrsl.com/4bmte
Bambu Lab X1C AMS - shrsl.com/4bmtf
Creality K2 PLUS - shorturl.at/D0otWv
Creality K1 -shrsl.com/4bmtl
Creality K1 MAX - shrsl.com/4bmtq
Prusa Mk4 (Kit) - tinyurl.com/mr3feffk
Prusa Mk4 (Built) -- tinyurl.com/2pma4wer
Prusa XL - tinyurl.com/2ts378f2
▼ SOCIAL MEDIA / CONTACT
Inquiries | bit.ly/3xQmgAS
Instagram | / frankly_built
TikTok | / frankly_built
Twitch | / frankly_built
Twitter | / frankly_built
Facebook | / franklybuilt
Reddit | / njtricker609
Discord Community | / discord
▼ SUPPORT THE CHANNEL!
Patreon | / franklybuilt
My Etsy | www.etsy.com/shop/FranklyBuilt
Frankly Built Merch | bit.ly/3AechHF
▼AFFILIATE AND DISCOUNT CODES!
AMAZING Discount Codes! | tinyurl.com/4au52zta
☞ Check here for Up to Date Discounts and Codes!
ELEGOO| tinyurl.com/3zrsm4pf
☞ Visit Elegoo for my favorite FDM 3D printers, from entry
level to advanced!
CREALITY | tinyurl.com/yhb9rbj9
☞ Visit Creality for a variety of FDM 3D printers, from entry
level to advanced!
BAMBY LAB | tinyurl.com/yhvvssd3
☞ Visit Bambu for a variety of FDM 3D printers, from entry
level to advanced!
DO3D | bit.ly/3zWo8tC
☞ Use Code “FBT20” at checkout for 40% off awesome
3D models and files!
AMAZON | www.amazon.com/shop/franklybuilt
☞ Visit my Amazon Store Front and explore my favorite printers,
filaments, build supplies and more!
SUNLU FILAMENT | bit.ly/3gXbSAo
☞ Use Code “VQLDTFWBMQ” at checkout for 10% off filament!
Disclaimer- This video is NOT sponsored by any brands mentioned in this video. Honesty is very important to me and my channel- all thoughts and opinions mentioned are my own. This video is NOT sponsored by any of the other brands mentioned above or throughout this video. The links provided above are affiliate links. Affiliate links allow me to make a small commission from purchases made on my recommendations, with no additional cost to the customer!
Thank you for supporting me!
▼TIME STAMPS
#3dprinting #2024 #3dprinter
@palebluedot4968 21 күн бұрын
3D printer with a huge build volume + multi material sistem + affordable price = game changer I think this is the right formula!
@godz1379 20 күн бұрын
lets hope elegoo makes a bigger version of that new printer as well. as long as it works good, it'll deal a blow to others
@jasongooden917 20 күн бұрын
let's hope their printers are better than their filaments
@christianmontagx8461 19 күн бұрын
Since when has a bigger build volume ever been a game changer? Especially for whom? Industry? No. Private users? Not at all.
@jet_flyer 18 күн бұрын
@@christianmontagx8461 you clearly have no idea what channel you're commenting on lol
@MrSirclint 15 күн бұрын
@@christianmontagx8461 lmfao
@7kortos7 20 күн бұрын
I'm happy that i just prepurchased two Elegoo Saturn 4 Ultras. I appreciate that they reached out to you for this event. they really look out for the little guy, which is really neat.
@djnetboy 18 күн бұрын
Thanks for not being the typical KZfaq guy and talking and filing while at a show. Liked and subscribed.
@astrophysicistguy 18 күн бұрын
I've had my PRUSA XL up and running now for about 2 months and while it's certainly not for everyone because of the price point, the ability to do large one piece prints for cosplay is a true game changer. The only other printer I've ever owned was a PRUSA i3 Mark 3 that has 3,800 hrs on it and even though I did full Mando, Bo Katan, Dalek and weapons like the Amban pulse rifle and heavy infantry tri barrel on it the increase in capability of XL is hard to comprehend. I have started a full Halo MC armor build and the first thing I did was print the helmet in one piece. My Mando helmet was 9 pieces. If you can afford it the 5 tool head XL could be the last printer you'll ever need if you're a cosplayer ...
@802Garage 20 күн бұрын
Print quality looked ROUGH on the K2 Plus. I'll give benefit of the doubt that it's trade show issues with people opening and closing the door and such, but come on. Creality really needs to not half ass this printer. The K1 series has so many design flaws, especially the extruder. The Elegoo Centauri Carbon looks like it could be good, but why the dark glass? Come on. If it can run stock Klipper and it's open source that's still a huge pro for me over Bambu Lab. Price definitely matters, because right now Qidi is my top choice for sure, and I doubt Elegoo will change that. Great coverage in general! I'd love to see more pellet printers too. Def want a scanner soon as well.
@digiscream 20 күн бұрын
The Elegoo Centauri certainly looks interesting - my problem with them has always been that they absolutely swore _blind_ that they weren't going to make a bigger Neptune 4 printer, so we all bought the standard ones, and then...boom, 4 Plus and 4 Max a few months later. So...won't be buying the Centauri Carbon, I'll be waiting for the CC Plus. Hell, they might even beat Bambu to building a bigger P1S.
@blazet9860 20 күн бұрын
They denied having a core xy coming out when I inquired. But I need a little bigger build volume for full sized helmets anyway.
@digiscream 16 күн бұрын
@@blazet9860 - Yeah, I'd expect the Plus or Max (or both) to be announced within 3 months of the CC release. I really love Elegoo's approach to printers, but I absolutely hate their secrecy.
@MrBaskins2010 18 күн бұрын
sooooo excited for that 300mm+ bambu
@LordNerfherder 20 күн бұрын
3d printing companies need to stop using tiny radial fans for chamber and aux-like fans. This needs to stop. If possible, even the part fan could perhaps have a slightly larger fan by redirecting the airflow. Even just increasing the radius of the fan by 10-20% you'd get an exponentially higher airflow or as we are interested in - the same airflow with lower RPM/decibels.
@MTheConqueror 15 күн бұрын
So we're getting a new Bambu lab printer in the next two months? THATS GREAT NEWS🎉🎉
@oyuyuy 20 күн бұрын
I just hope the next Bambu has dual extruders. 300x300 would be nice but that's not I'd pay a lot extra for right now.
@scottnopreferance9006 9 күн бұрын
Totally agree, it's hard to say yes to any multi color when a 3 hour prints becomes 26 hours from just 3 colors instead of 1.
@hunt0583 21 күн бұрын
The event was so fun! So fun meeting you as well!
@EdwinMakes 21 күн бұрын
I love your videos Frank and you have inspired me to create my own videos about 3d printing. I haven't done much yet but Im hoping to make more content soon. Thanks for the inspiration and the great content!
@joshuarollins3202 20 күн бұрын
I can confirm that the big printers from mingda are workhorses, I've had one since November I think I got it, and it's been wonderful, I've found if you create a custom profile on orca, it prints amazing, and it's so very easy to print with different sized nozzles on it. Only things that need doing after you get it out the box and out the gantry on is just to tighten up the leadscrews. I have the 400mm³ magician pro and it's perfect for helmets and other cosplay props in 1 or 2 parts
@Ferny_crafts 21 күн бұрын
Thank you for this video Frank ❤
@robertfousch2703 20 күн бұрын
As soon as you get the scanner we need an in-depth. You are correct that could be a huge game changer.
@7kortos7 20 күн бұрын
that Revopoint scanner is what i've been dreaming of for years now. i'm going to save up for one starting right now.
@rereertege7571 18 күн бұрын
It unfortunately doesn't always work seamlessly as you'd like to, it can be EXTREMELY frustrating just like many other 3d scanners. I've had one for a while now because I was a Kickstarter backer.
@joshuamccracken8994 18 күн бұрын
thanks for the tour of the show!
@Shrouded_reaper 2 күн бұрын
Shoutout to all 3d scanner companies for getting me those REDACTED files 😏
@Iskelderon 20 күн бұрын
Nice to see, since I'll soon be in the market for a new machine with Klipper and an at least 300mm build volume.
@LincolnWorld 20 күн бұрын
Great running into you near the Bambu booth on Wednesday! That Revopoint self contained scanner will be a great addition to your cosplay making tools. The guy with the pellet based 3D printer offered to sell it to me at a discount because he didn't want to carry it home. I said no, because I didn't want to carry it home either. That thing is massive! (and even with the discount was going to cost thousands.)
@nonames9 20 күн бұрын
i want this unknown new bambu printer so much. imagine a big printer with the quality of the other bambu printers and within the ecosystem so up to 4 AMS for direct multi color printing and no need to cut down large objects, just print them 1:1 what you see on your screen is what you get in a couple days out of your printer... cant wait
@drkknight001 21 күн бұрын
Great video. Looking forward to some of what’s coming out, what that means for the direction the market is going, and what that means for prices of current products. Also, thanks for the VO over B roll. It’s so hard to get good sound quality in a singular walk and talk style video.
@tsunamiblair1 20 күн бұрын
That's a bold move Cotton!!! Got me dying with the Dodge Ball reference 😅😅😅
@SynysterGoose 20 күн бұрын
Respect the B role and voice over option. Way better
@FranklyBuilt 20 күн бұрын
Trying to do this more. Let’s me focus and get more info across
@SynysterGoose 20 күн бұрын
@@FranklyBuilt and I can actually hear what you’re saying
@SynysterGoose 20 күн бұрын
@@FranklyBuiltalso respect the dodgeball reference
@FranklyBuilt 20 күн бұрын
@@SynysterGoose I’m glad someone caught it haha
@MajikPPMan 21 күн бұрын
Core xy for less than 400? Id have to wait to see if the first users have issues bc that sounds TOO good. That new scanner is incredible! And ofc I see this THE DAY after I order a moose lite 😂. Great video 👍🏼 Waiting for the new bambu monster
@torquemada1971 21 күн бұрын
5:57 That's going to a yikes from me, dog. Dat banding tho.
@MikoajSzczepka 20 күн бұрын
They’ve learned nothing from k1 vfa problems
@mikejackson9585 21 күн бұрын
@Frankly Built, Elegoo went on the record saying they have prototyped an AMS, but it's not working well, so it will likely be in the second gen on the machine. But who knows.... if they get the issues sorted, there's nothing stopping them from releasing it mid cycle.
@blackcanyonmodelworx6060 20 күн бұрын
got my start in 3D printing with the original Elegoo Neptune 3, then moved to the pro, plus, and max. eventually switched to Bambu and Flashforge. Very excited and interested in the new Elegoo core XY.
@krollmond7544 20 күн бұрын
lol seeing lots of info on the alleged Bambu XL, just gonna get the Prusa XL honestly, I can already tell its way more polished since release, and the enclosure is just around the corner. Cool video btw.
@Vegetabledumpling 19 күн бұрын
I really hope that elegoo can pull off this centauri carbon because as they have been so well at giving us all the bells and whistles for a fraction of the price of other companies and if they can successfully copy the X1 and have it for a fraction of the cost it would be AMAZING
@acexl 21 күн бұрын
it was great to see you at rapid, i dont know if you spoke to the folks from General Lattice but their software tool is something i left the show excited about. It makes latticing solids easy and intuitive and the price for the service is not ourageous.
@3DSte1985 18 күн бұрын
If the Elegoo printer is under £500 and has an AMS it's day one for me
@zoom5.o745 22 күн бұрын
So cool!
@ethancohen6005 18 күн бұрын
Id take creality's cfs over the ams in terms of expanding it, as long as its good. Bambu has their printer you buy... but then you need extra parts to allow it to have an additional ams. Parts, that never go on sale
@Spirited282 20 күн бұрын
Great video and cool stuff coming. The new Elegoo machine looks great, they always offer great pricing and myself have never had issues with their machines. I would never go back to a Creality machine. May need to start saving up for the larger Bambu..
@anthonylong5870 20 күн бұрын
With Elegoos fantastic customer service , Great print quality that Centauri should be a no brainer.
@aeonjoey3d 20 күн бұрын
Why would you call a first of its kind for any company a no-brainer? Even the first X1C’s had issues, same with the Prusa XL’s. Anyone wanting a “no brainer” would buy a tried and tested reliable model with enough time to work the bugs out. It’s not a no brainer to be a guinea pig bleeding edge consumer dealing with issues when everyone else with vetted machines get to keep working.
@anthonylong5870 20 күн бұрын
@@aeonjoey3d Read my post slowly...Take your time because it obviously was a bit passed you. I said BASED ON ELEGOOS CUSTOMER SERVICE AND PRINT QUALITY. That means that if there are any issues then you know elegoo will be there with support. They also have a firm eye on all of their printers having great print quality so it shouldn't change.....
@TheBronx2105 20 күн бұрын
Thank you Frank for the great content. I did have a question. Where you able to record anything for resin printing?
@TheScottcool 13 күн бұрын
Defo gonna get the bambu xl machine when it comes out, looked at the Prusa XL for a while but its just seems a bit old hat now apart from the multi toolheads , and i think the bambu xl will come out with a similer design but inclosed and a more polished printer.
@PotterKristen 20 күн бұрын
I am waiting for Bambu...
@aeonjoey3d 20 күн бұрын
Omfg 350+ build volume? I might sell my X1C
@MrDonXX 7 күн бұрын
FLSUN left in shame because not one of the systems they sent out for review had anything good to say about it. One reviewer who purchased one with his own money told his subscribers to not buy this printer
@aeonjoey3d 20 күн бұрын
Seems like some people were shown a Bambu Lab AMS compatible TPU, and a new Bambu cardboard spool for non-AMS filaments - there’s pics on the Bambu forum but little info
@CaptainCreativity 20 күн бұрын
Hey Frank, First there was amazing to meet you at Rapid TCT, And I definitely checked out the Miraco, it's pretty cool that it's all in one. When I watched your video you mentioned how the K2 Plus at the event was one of the original units that they made. So I'm guessing that explains the layer lines that we both noticed. Hopefully that gets fixed before it's eventual release to the public. Anyway I had a question about scanning. You mentioned how you can use it for your cosplay and I was wondering is there a way to leverage a 3D scan of a person into armorsmith? Or is the idea that once you now have a full 3D scan that you may not even need armorsmith? Anyway wanted to get your thoughts on that. Great Video and thanks for sharing
@FranklyBuilt 20 күн бұрын
You would theoretically need to drop the model in then match the avatar to it by eye. It may be more hassle than it’s worth IMO
@unonot2 20 күн бұрын
Love the videos, question regarding the K2..... Is it only going to accept 500g rolls of filament?
@th3w1ldc0rn 21 күн бұрын
Loving that exterminator helmet from Galactic! My first helmet build!!
@Gholson314 20 күн бұрын
Awesome meeting you at the event Frank! Also fun hanging at the elegoo meetup
@MakerBees333 21 күн бұрын
I knew they were having an awesome sale for a reason 😊 glad I skipped it so I can be ready for a bigger and reliable ❤
@MattHealey. 20 күн бұрын
I bit and grabbed an x1c so of course they let yeh xl slip lol
@MakerBees333 20 күн бұрын
@@MattHealey. I definitely had my check-out info punched in and not even sure how, but dragged my feet long enough 🤷♂️ Don’t feel bad it was an amazing deal, I just can’t afford the new one for a while if I get an older one.
@sliverbaer 17 күн бұрын
That scanner does seem pretty slick
@steev182 20 күн бұрын
I was waiting for the K2 Plus but my Ender 5 Pro decided to keep clogging on me, so I ordered an X1 Carbon. It arrives on Monday and seeing the results on the K2 Plus kind of helped justify my choice. I still want a 350x350x350 printer, but I can wait for what Bambu has to offer.
@halfgod85 19 күн бұрын
Dodgeball reference made the whole video worth it.
@nathand223 21 күн бұрын
If you get the revopoint miraco, please review it. I have been looking for good solid reviews but haven't found any on it.
@ericthecyclist 21 күн бұрын
You aren't going to grind up your old prints and feed them into a pellet using machine; for a pellet machine you want to have nice roundish pellets instead of oddly shaped stuff that is going to clog.
@mitchelldockter1648 20 күн бұрын
I've been looking to upgrade my printer for the last couple of months and have sort of settled on the BambuLab P1S, did you see anything that would be worth waiting for through the end of the year? Thanks!
@shawnmcandrew6923 20 күн бұрын
dude that scanner looks mental.
@fotisxevgenis 20 күн бұрын
cool video . 👍
@ricepuffmc 14 күн бұрын
Im going to get the Centauri Carbon because i like elegoos neptune 4 and i want a corexy but not an expensive one
@RocketCardragracing 21 күн бұрын
This is dope
@ryback12 7 күн бұрын
that it is the best printer to start with quality/price that I could use to print an iron man helmet
@bad84c10 21 күн бұрын
fingers and toes crossed that elegoo will do multi filament!!! if so im buying multiple lol
@joeyjones4535 21 күн бұрын
Very interested in that mingda (or however you spell it) line. And ibwould definitely try an elegoo carbon copy.
@daremo50na76 14 күн бұрын
Another completely off topic question from your biggest fan: I’m trying to experiment with using one power source to power entire MK 85. From a 12 volt battery would you suggest a linear, shunt, or switching regulator to drop voltage along eyes, servos and smaller diodes?
@FranklyBuilt 13 күн бұрын
I use a 5v pack now
@zaclopez2363 21 күн бұрын
What 3D scanner do you recommend that’s out? Thank you I always enjoy your videos
@Wm200 19 күн бұрын
sorry I stopped listening after you said that we may be getting a larger Bambu Lab soon. I so much want to go x-max 3 yet will jump ship anytime. :)
@Redrik666 21 күн бұрын
Just fyi that Array thing that has 4 printers in one for mass printing is cool and all but it's 60,000 dollars for the base model. lol
@andyman8352 21 күн бұрын
I am on the market for a new printer and am wondering if I should wait for the next gen printers, or go for what is already widely available. I think this helped me make the decision to wait a bit to see what this next gen market puts out.
@scottnopreferance9006 9 күн бұрын
Seems like you know scanning tech well enough.. so, as a poor boy who wants to start scanning stuff i keep hearing that cheap scanners are worthless. Is that true? And did you get any idea what the cost might be on that exciting new scanner ya saw?
@Op_Cosplayer 21 күн бұрын
I am eager to hear your thoughts about - flsun s1 you claimed you’re recently testing.
@EpicEruptor13 15 күн бұрын
What should I do if my ender 3 neo nozzle goes into th3 baseplate at the start of the print? I have already tried to level it multiple times
@unknownmysterious7585 21 күн бұрын
do you think the cfs for creality k1 Maxs will just work the same as the bamboo? I heard they are gonna have an upgrade kit to make the k1 compatible?
@Teku66 20 күн бұрын
Do you have any recommendations or a video on "portable" or travel friendly 3d printers? Basically for long weekend events or stays with 3D printers that are easy to travel with that can still produce good quality prints for things like last minute cosplay accessories, replacement parts, etc?
@BattleDamageProps 19 күн бұрын
I bought the k1 max due to your review of it. You seem pretty hopefully for the k2, should I roll the dice and get in on the 20 percent off order or wait?
@ZachYount 20 күн бұрын
I very recently purchased a Bambu Lab A1 Combo (1 week ago) should I consider the Elegoo Centauri thingy?
@hegga_nm 21 күн бұрын
Plenty of stuff to be excited about and quite a few Bambu clones incoming, which is not bad, competition will keep Bambu on their toes and make them keep innovating, or at least lowering the prices. I love my P1P but I would love one with a 300x300x300mm build volume. 😃 Any pricing info about that Revopoint 3D scanner?
@FranklyBuilt 21 күн бұрын
$1200 I believe
@maxsgeekdom8514 21 күн бұрын
@FranklyBuilt high buy in but that's an in built all in one device. Hopefully no subscription required though
@hegga_nm 21 күн бұрын
@@FranklyBuilt thank you! Certainly not cheap-cheap but considering the scan quality you talked about that's actually not bad for all in one device!
@krollmond7544 20 күн бұрын
If I'm being honest, all this copy and pasting is dumb. It seems like Prusa is the only company doing their own thing while Elegoo, Creality and Bambu are chasing each others coattails.
@FranklyBuilt 20 күн бұрын
Unfortunately prusa isn’t. They are but not in the hobbyist realm. Bambu is the leaders now and everyone else is playing catchup. Prusa needs to fix there whole model to compete bow
@daremo50na76 17 күн бұрын
Incoming revopoint review please!!!
@davisrob 18 күн бұрын
Any word on whether Creality will support multi-color for the K1 and K1 Max?
@elitecpudoc329 21 күн бұрын
I'm ready for the iron man build! but curious if the multicolor system from creality will be backwards compatible with the k1
@maleksamer8857 21 күн бұрын
Hi frankly built👋
@stevencross8937 18 күн бұрын
as long as their p1s clone works better then the 4 pro they'll be good.
@JeremyjsmSWVA 20 күн бұрын
Bambu lab:: we would like to introduce the P1XL 320x320x320 $1999. $2299 with ams
@normanbarud 21 күн бұрын
I just bought elder… should have waited for big Bambu
@ThisisDD 20 күн бұрын
Can you ask Creality what is happening with the CFS and the K1 series? Will it replace the gantry with linear rails? If not I will do the mod to eliminate the VFA, but if it's coming anyway I don't want to spend it on it and then have to replace it.
@michaelalanstlouis 20 күн бұрын
Thanks for the updates. Looking forward to a new, bigger Bambulab printer. Can you elaborate a bit more on the metal printers? Or point me in the right direction? I don’t suppose you will be able buy spools of metal and print things on a tabletop machine.
@FranklyBuilt 20 күн бұрын
Nah that’s not an option yet
@brayanmorales4737 20 күн бұрын
Were you ever in the air force? I think we went through ALS together?
@FranklyBuilt 20 күн бұрын
Yep! I was in Kadena for ALS. I think like 2015? We had a firefighter as an instructor I think
@printprimepaint 21 күн бұрын
I'm surprised there was no resin printing mentioned. Do you think the industry is moving away from resin? or is it more of an issue with ventilation on showroom floor?
@Rambunctio 21 күн бұрын
No he mentioned anycubic @ 2:25
@printprimepaint 21 күн бұрын
@@Rambunctioyes anycubic is mentioned. But he shows their FDM multicolor printer. Which is part of the reason I asked is this the direction the industry might be taking. I haven’t watched others’ videos on the event yet so there is a chance I’m missing something.
@FranklyBuilt 21 күн бұрын
Resin printers are all the same. They all work
@jarrodlangford7692 20 күн бұрын
Z banding on that print looks rough tbh for the k2 plus. $399 enclosed corexy from elegoo sounds good. If its reliable ill grab one for sure.
@LoganKale-i4d 20 күн бұрын
The is one guy in my locale who is making something that does the breakdown and reuse of excess plastics or other material blends. Manuel Maeder, see one of his recent videos on it.
@jonahtaylor9338 21 күн бұрын
I guess we never get a flexi rexi update
@FranklyBuilt 21 күн бұрын
Check TikTok lol
@jonahtaylor9338 21 күн бұрын
@@FranklyBuilt not everyone has TikTok
@FranklyBuilt 21 күн бұрын
I mean…download it then? Lol or check Instagram? I posted those videos a long time ago. I just reposted them here
@jonahtaylor9338 20 күн бұрын
@@FranklyBuilt I’m not allowed to have either of those😂
@JustinNowell-jb4yq 9 күн бұрын
Hey I was looking at getting a big build plate printer that ain’t super duper slow. What would you suggest? I’m looking at the elegoo Neptune 3 max or the anycubic kobra 2 max. Or should I wait till the new big bambu labs? I have a p1s and absolutely love it
@opzhyper8120 7 күн бұрын
I would personally wait for bambu is excellent at giving us an industrial quality printer at an affordable price.
@jettech1041 20 күн бұрын
Wonder what the price point will be for the scanner?
@0ProjectNexus0 20 күн бұрын
I was originally thinking of getting a ender 3 max neo or a p1p but the centauri carbon just seems better if it’s that price
@christopherduffy8225 6 күн бұрын
So, 3D Printing Expos are starting to become more popular each year. I’m considering creating my own little workshop to create some plastic props from certain generic 🎮games. I’m still exploring the world of 3D Printing. If I were to purchase a 3D Printer that can make props from Microsoft Halo: Combat Evolved weapons that have battery compartments, which printer would you recommend Frank? And the type of fillament spool to create those futuristic toy props?
@xavierlewis4945 18 күн бұрын
Still no word on a mobile app for tracking print progress
@FranklyBuilt 18 күн бұрын
Bambu and Creality have that already
@Queue22 20 күн бұрын
I love the PRUSA XL because of the no waste multi color, but the price is what kills me
@chezsuzie 20 күн бұрын
Wait a second- this IS Q3! 😠
@comradejordan5738 18 күн бұрын
Surprised on the comments of the anycubic kobra 3. Their AMS is already ahead of Creality’s AMS. The anycubic material system has active heating which is perfect for water soluble printing with PLA. For the price of ~450 you get an AMS better than the flagship Bambu and better than the new gen creality CFS AND a 3D printer. Many reviewers said it used less filament than bambu’s AMS aswell. Also open source…
@EvilSpyBoy 20 күн бұрын
Dammit, I dont have space for a large format Bambu... but I do have a usecase for it with a part that I make as 2 parts that are "broken"
@dezaina9961 20 күн бұрын
0:04 what’s that helmet from?
@nman2563 21 күн бұрын
I'm here for an Elegoo Centauri Carbon Max with the same 420mm bed as the Neptune 4 Max. Elegoo, make it happen!!
@maxsgeekdom8514 21 күн бұрын
@nman2563 that would make it $$$ but yeah would be great
@nman2563 21 күн бұрын
@@maxsgeekdom8514 If they can make the GigaStorm for 2.5k, they can bring in a 4 max core xy for under 1k
@blazet9860 20 күн бұрын
Elegoos new core xy is too small for full sized helmets isn't it? I would love to stay with them, but may go with that new creality K2 plus or a K1 Max most likely.
@ffaorlandu 20 күн бұрын
Would you advise waiting for the new core XY Elegoo or getting a P1S on sale now?
@FranklyBuilt 20 күн бұрын
P1s
@jarrodlangford7692 20 күн бұрын
P1s is tried and true. I own 4 and have put 2000 hours into each of them without issue. Most I've replaced is one extruder and a couple nozzles but I iron everything so it wears quicker.
@firstaidenguy3052 20 күн бұрын
hey Frank Which iron man suit are you going to make?????????
Андрюша рассказывает
Рет қаралды 2,3 МЛН