I Made CSS Audio's Flagship Audiophile Speaker into an Absolute Monster! 20Hz !

Рет қаралды 56,231

Жыл бұрын

CSS Audio is famous for their DIY kits that I reviewed (CSS Audio 1td, 1tdx, 2tdx) and because I was so impressed, I decided to team up with them to create the Typhon Loudspeaker, a High-End 3 way speaker without the need of a subwoofer in your home audio that takes advantage of both the best bookshelf speaker and a floor standing speaker designs.
www.css-audio.com/typhon
www.css-audio.com/online-stor...
Support on Patreon: / jayiyagi
follow on Instagram: / jays_iyagi
follow on Facebook: / jayiyagiofficial
Follow soundstage take 2 reviews: • Jay's Soundstage! reviews
Speaker stands: amzn.to/3ssRhI3
Better speaker stands: solidsteel.it/my-product/ss-7...
acoustic panels I use: ua-acoustics.com/
acoustic curtain: amzn.to/31d1zAM
BDI Cabinet I use: bit.ly/2OJRwQQ
amzn.to/3chBuFZ
other BDI Cabinets: bit.ly/3ctxXV1
amzn.to/30bsUCH
my fav hifi tweaks: (Isoacoustics devices) amzn.to/3j5FGvM
#hifi #audiophile #homeaudio

Пікірлер: 466

@Jayiyagi Жыл бұрын

*Thank you everyone for stopping by. This was exciting and it was hard keeping it a secret up until now! Please spread the word* www.css-audio.com/typhon www.css-audio.com/online-store/Typhon-Priced-Individually-p504884986

@ptg01 Жыл бұрын

This is way cool... and it is only 20 minutes away from me !!! I have no idea that such a company existed in my backyard ! I would have LOVED to host you Jay !!!

@wa2368 Жыл бұрын

Does it sound better than Wilsons and Magicos? Yes or No? A single word answer is sufficient. Thanks.

@Jayiyagi Жыл бұрын

@@wa2368 I will not compare my own design with other speakers on the market. Thank you for your understanding

@davidjosephgill9702 Жыл бұрын

Hey Jay, do they offer grills for us that have Children?

@Jayiyagi Жыл бұрын

@@davidjosephgill9702 absolutely. Magnetic grills that is acoustically transparent is included :) I will go into more detail in another video but the top module also features a mechanism so that it cannot be easily tilted over. we weren't messin around for 2 + years ;)

@greggibson33 Жыл бұрын

I can hear Danny now saying he could make your speaker sound better...... 😜

@arunindc6145 Жыл бұрын

Sure hope there are no sand cast resistors in there!

@SuperMcgenius Жыл бұрын

😂😂😂. I love Danny, but that is funny as hell.

@SuperMcgenius Жыл бұрын

Regarding x overs, after years of diy speakers, I always have out board x overs right behind my amps and run the cables to the speakers, just sounds better.

@richnbel1 Жыл бұрын

😂😂😂

@Jayiyagi Жыл бұрын

@@arunindc6145 no sandcast resistors

@aceofspades6667 Жыл бұрын

The Jay speaker , the Thomas amp, and a Sean sponsorship of underarm hats = an endgame setup

@deeplyclosetedindividual Жыл бұрын

Hell yeah

@ThomasAndStereo Жыл бұрын

See you all at Axpona!

@tractioncontroloff9796 Жыл бұрын

In my opinion this is the way to sell just about anything. Give the potential buyer a window into the process and a back story. I can’t wait to hear these! See you at AXPONA!

@BPTVch Жыл бұрын

Great content, congrats on the collaboration with CSS. I think I’m about half an hour away from CSS and at some point will visit them to audition your creation. If you are ever around again I invite you to come over and check my budget oriented system. You may be in for a dramatic surprise. Cheers!!

@xxsauron007xx Жыл бұрын

This sounds like an awesome project. Can't wait to hear the reviews for this! This video is also really interesting so far and the look behind the building process is also very nice.

@AusGanesh Жыл бұрын

Hi Jay, Congratulations in producing a Wilson Watt Puppy or Sasha for the Audiophile community at an affordable price, but I still think $5,500 USD is a bit steep. But I guess raw materials have gone through the roof, specially wood. All the best, looking forward for review. Also I did not know that the caps in the cross over could make such a tremendous difference.

@mariodrv Жыл бұрын

The price is phenomenal - pair this with Schiit Tyrs and you are D O N E. : )

@kenhiett5266 8 ай бұрын

If these are 90% as clean and articulate as Wilson, I'd probably talk myself into buying a pair.

@boxsoft Жыл бұрын

Congratulations on conceiving a well-balanced design and shepherding it through to fruition!

@stevenbauer1730 Жыл бұрын

This is absolutely awesome. I really enjoyed the behind-the-scenes development process and discussions. All three of you seem like great guys, and you did a great job with this video. Having watched most of your videos, I think the sound signature I like is similar to yours so it is exciting to see that you had so much input in the sound of these speakers, and they will be on my short list when I purchase a new pair of speakers.

@gme10955 Жыл бұрын

Have to say, I'm really impressed with the presentation and story behind the development of these speakers, not to mention the fact that they look gorgeous!

@f430ferrari5 Жыл бұрын

Ingenious design. Way to go Jay! 👍 Very impressed.

@andrewglasser4502 Жыл бұрын

Great job Jay and CSS!

@jeremyr722 Жыл бұрын

The price point you guys settled on is very fair! I’ll keep my eyes on these.

@MrSteney 8 ай бұрын

These look stunning. It's cool to hear everything that went into the development of the speakers.

@nobodyimportant2294 Жыл бұрын

Wow, Jay takes it to the next level 👊🏻 But with some excellent help from the guys at CSS. Really interesting stuff!

@scott001music Жыл бұрын

CONGRATS Jay! So happy for you.. Phenomenal job on the design and can't wait to hear these at Axpona!

@caesar148 Жыл бұрын

IMO, this is the best video Jay has done so far. What an exciting journey to the finish product. It was definitely not a walk in the park designing the speakers, especially the crossover. I am sure there were many late night sessions. My hats off to you guys. I am putting these speakers in my shopping list.

@ChicagoRob2 Жыл бұрын

100% agree. Top-level production all the way. Very impressed.

@Wozzaatwozza Жыл бұрын

Well said

@NemoPropaganda Жыл бұрын

Oh man this speaker looks beautiful 😻

@psyphonyxaudio Жыл бұрын

I really love your humour and cinematography for this entire thing! Wonderful story telling and scene editing =) .. Absolutely swesome. ! =)

@psyphonyxaudio Жыл бұрын

The upgrade path for these ... Have An external Cross-Over box with all the larger parts - tweakers heven =)

@snomofilms Жыл бұрын

Cool- happy for you! Can’t wait for your review of Danny’s flagship towers you promised ❤

@Jayiyagi Жыл бұрын

Coming soon

@juicy_clams Жыл бұрын

Excellent, well produced video.

@Temmple Жыл бұрын

Excited to see some reviews of these towers. Love my CSS 1TDX with EX-M1. Really a great match once you add a nice DAC.

@AudioNaut93 5 ай бұрын

This is so cool! What a fun process to take part in. Jay, you’re living the REAL audiophile dream. The guys from CSS seem like really cool dudes who are passionate about speakers and aren’t just corporate businessman trying to flip a profit. I’m almost ready to pull the trigger on one of their DIY kits.

@BostonMike68 Жыл бұрын

I finally broke down and spent the money on jantzen Caps on my ok latest speakers wow what a difference people try to tell me it's a placebo but you can just feel the weight difference and the bass is deep and the tremble is so clear it's definitely worth the extra money

@BasicYTUser Жыл бұрын

Love this skit on how the process went down.

@trevorhansen4183 Жыл бұрын

Interesting video, hope they make a ton of these. I very much enjoyed the cap comparison. I recently upgraded the caps in my Bottlehead Single-Ended Experiment v3 kit to Jupiter caps and they made a huge difference from the polymer caps they come with.

@bobb.9917 Жыл бұрын

I spent $600 to replaced all the caps and resistors in the tube stage of my Schiit Freya+. I did the work myself…which was an adventure. I have to say that the sound improvements were substantial and the whole effort and expense was super rewarding! This hobby is FUN! 👍🏼😀 (My situation needed substantial break-in before all the benefits were realized).

@512bb Жыл бұрын

I can personally attest to your view of the Duelunds, my Tannoy's were completely done with the Duelunds & although it was expensive the upgrade was simply mind boggling... I know there is a difference in caps but the Duelunds really stand alone. Much success in your new project Jay.

@REX4340 Жыл бұрын

Well done!

@t3dewys Жыл бұрын

This is amazing!!! I absolutely LOVE my 1 TDX speakers and I bought them because of your review. CSS being in Michigan was the icing on the cake as I live in West Michigan. It looks like I might be selling a kidney.

@kerryarmes2786 Жыл бұрын

Stop in for a listen sometime

@Jayiyagi Жыл бұрын

Visit them and give them hell. I give you full permission 😂

@pongyang8705 Жыл бұрын

Can’t wait to meet you and Thomas at Axpona! Looking forward to hearing the speakers and the TS120! Woowoo!

@philipketchum1407 Жыл бұрын

You dove head first into a very competitive field at that price point. Very ballsy. I like it!

@JohnRogers0014 3 ай бұрын

Like a DCM Time and Half Time from the 80's. Some day Steve Eberbach will be recognized for his advanced speaker design.

@yuckysamson Жыл бұрын

While the performances were middling at best, the "impromptu" footage clearly concocted, the dialogue trite....you guys are just SO DAMN CUTE! And this is (in all sincerity) an absolutely fabulous collaborative product and project. Hats off! Jay you did it. It's a bucket list thing. CSS, you guys make fantastic stuff. It's like going back in time to when old school speaker designers just did it for the love of the craft.

@Jayiyagi Жыл бұрын

the sweat and tears were real. Sometimes frustration but we did it and I couldn't be happier

@kerryarmes2786 Жыл бұрын

I mean, I come across as robotic and fake to my wife so how do expect me to be in a video 😂

@yuckysamson Жыл бұрын

@@kerryarmes2786 unfortunately I can totally relate..particularly when I'm saying this like,"honey, this is the best. Dinner. Ever."

@TheHammerofDissidence Жыл бұрын

These look awesome!

@vipan190585 3 ай бұрын

That lines and dots wall panel will make really good studio speakers for consideration to place behind speakers on front face

@paulhartman3118 5 ай бұрын

External crossover, so many options that way and so easy to change. In my speaker projects I use external and you can do active if you want to!

@dougg1075 Жыл бұрын

Looks great

@ChicagoRob2 Жыл бұрын

I recapped my B&W Matrix 805s with Superior Z Caps, and the resulting sound is amazing.

@technics-n-thuiast8346 Жыл бұрын

I have made a few speakers myself. It is a never-ending endeavor and journey. RIght now I just buy stuff and do certain upgrades and that is it.

@suwatt6019 Жыл бұрын

Hi Jay, very well done video. I'm looking forward to listening to your speakers at Axpona.

@PaoloCaminiti Жыл бұрын

External crossover as an upgrade is a great idea, also builds confidence in buying the speaker.

@Jayiyagi Жыл бұрын

The standard version (which is what we are shipping with the Jantzen caps) is packing lots of value that is hard to beat BUT even if we offer external crossover in the future, it is made so that users can easily swap or we can do it for them if they ship the top module back (that's right, the lower module is pretty much done, the shipping of the top module will be a lot easier and cheaper to do for a massive upgrade and we will only offer upgrades that is audibly superior in every way)

@stephenyoud6125 Жыл бұрын

Excellent job, eh? Nicely done and interesting to see your choice of the Jantzen Superior-Z caps as I'd also bought those for another GR-Research style upgrade I'm doing on an old pair of speakers here at home.

@mndlessdrwer Жыл бұрын

The thing I find most amusing about amp technology is how we went super hard into digital amplification for a while in the 90's, only to now fall back on class A/B amps with their more rudimentary amplification circuit because it makes a more broadly appealing sound.

@genkifd Жыл бұрын

Congrats Jay what an awesome speaker. these actaully reminds me of my Hulgich Dukes. there they are also two cabinet design and the top (was) adjustable). these speakers are that price point i would imagine would be hard to beat.

@tallpaull9367 Жыл бұрын

Very Cool ! Great idea ! The new ClarityCap PUR would be an interesting cap to test

@skipgordon5382 Жыл бұрын

Congratulations Jay! Big accomplishment. I think you have developed something special. A good business lesson too. Always push for as low a cost as is possible. It’s not likely you will hit the target but the results will still be marketable. I personally think at $5500 you are in the range where audiophiles are starting to get serious. Not so sure it’s up to delivering all your 20k Luxman can dish out. Again - congratulations!

@tonychand4789 Жыл бұрын

Beautiful speakers.

@rehn1kri Жыл бұрын

These look awesome, Jay. Would be very interesting to display them at Axpona powered by Thomas’s Galion amplifier!

@jgonzo1995 Жыл бұрын

Well...what did you think?

@dougg1075 Жыл бұрын

Super nice man.

@gerasimger15 Жыл бұрын

can't wait for html audio. i heard java script audio is quite good..

@raspucin70 Жыл бұрын

Proud Daddy Jay! Congrats!

@johncallaghan3097 Жыл бұрын

Fascinating video -- and extremely well done. Personally, I'd never spend $5500 on speakers, but if I were in that market, I'd give these a listen for sure. My most expensive speakers, Dali Menuet SEs, cost £1500 here in the UK (around $2000 in the US). But the ones that sound best to my ear are a pair of open baffle Monacor Katana-M1. These were made from a kit that cost £420 ($518) -- they're so airy and engaging, with an amazing soundstage. Maybe your design would sound better, but I find the sound of an unspent $5000 in my bank account irresistible! 🙂

@Old_Sailor85 Жыл бұрын

Love my 1TD-X, maybe the best small speaker I've heard in my room. The tone is wonderful. Running them with a pair of REL subs. I don't know if I'm in for another $5500, but if I was I would certainly consider them. I guess I could sell the RELs

@rony6482 Жыл бұрын

Hi Jay's One of the days I saw your review and where you come from in your profession (exact science if I'm wrong) in which data and parameters are constant and indeed I am impressed by the field of sounds oh variable is not constant and I really enjoyed seeing the process of examining the drivers and crossovers it's fun to see and hear, I wish you all the best May you continue to show us good systems and produce enjoyable music from good speakers,It would be interesting to keep the CSS speakers (I'm testing a lii audio driver)

@tee-jaythestereo-bargainph2120 Жыл бұрын

Great Job Jay the towers look very highend , Like a top tier by Dynoaudio - Love the dual cabneit desighn helps with standing waves internally. 20hz WTH !! Me love paper drivers ' Thanks Jay Time for me to become a Patron way overdue 😃

@JamesWilliams-gf8gm Жыл бұрын

You should send these to Erin at Erin’s audio corner to get a full spin on the Klippel done.

@Reluctantaudiophile Жыл бұрын

These look really fantastic, what a great vid but I almost choked when you missed your original price point! Still seems a pretty good deal. I hope you send a pair to Sean over at ZF for review

@unicornslayer6963 Жыл бұрын

Hi Jay! Im a big fan of the channel. Imo the Jantzen sup-z is an amazing cap right from the get-go. Imo the jupiter copper/wax is 95% of the performance of the duelund cap, and far better then the sup-z in every aspect, but they need 500 hours to burn in. the Jupiters sound out of this world if jou bypass them with a Jupiter vitaminQ silvercap or duelund JDM silver cap or sometimes a V cap cutf. The Jantzen Sup-z is imo is the best bang for buck cap there is only beaten by the Jantzen Alumen-z. Also love THE miflex kpcu. This new speaker will probably sound absolutely amazing.

@WheeledandWellArmed Жыл бұрын

I use Parasound Halo A21 amplifier and they are not horrible. I have a NAD M10 v2 in my other system and love them both in different ways.

@marvinschaap2931 Жыл бұрын

Really enjoyed the video. Looking forward to see them at axpona!

@NosEL34 Жыл бұрын

Instead of soldering the caps in you could use Capacitor binding posts on the crossover so people can roll crossovers if they wish. I've seen a Chinese preamp with that option on the input/output caps inside the chassis.

@tallpaull9367 Жыл бұрын

MiniDSP on the bottom module and Passive Z-Cap on the top module would be cool!

@jonuiuc Жыл бұрын

I'll be in Axpona this year again, I'll check it out.

@datdudeinred Жыл бұрын

That alexa skit was perfection 😂😂👏

@reginaldburnbridge2217 Жыл бұрын

Excellent thanks

@jefftrout7697 Жыл бұрын

wow, I own both the 1TD-x and the 2TD-x and I want this. Not sure where they will go but darn, they look sweet.

@robvandendolder3157 Жыл бұрын

Thank you for this video. We own and love our Sonus Fabers. It was interesting to see the extensive work that went into this project. Personally did not think that $3k was realistic for this level of speaker, especially considering the materials that comprise the speakers. They look pretty decent, hence I think $5.5k USD sounds very fair for the purchaser. It will be interesting how these will compare with other speakers in that price range. Of course it is a DIY Kit so that’s also a factor in the pricing. Looking forward to a comprehensive review. Thanks again Jay, very informative and educational too. 😎👍

@Jayiyagi Жыл бұрын

It is not a DIY KIT! it's a finished speaker. Unfortunately this speaker is too complex of a design to put it into a DIY kit (ex. the 5 degree tilting mechanism in 1 degree increment) and DIY Kit version of this speaker won't really reduce the costs as we are not putting in labor or R&D cost into this project to reduce the cost heavily.

@micheldegroot2063 Жыл бұрын

@@Jayiyagi LOL, it's good you mention it!

@AverageNiceGuy 5 ай бұрын

It appears that I will need to be saving up $$$$ for my next love... Nice work Gentleman 😎👍

@2madamimadam290 Жыл бұрын

I built the 2td-x and the bass was so good I ditched my Rhythmik 12" sub. Yours must be outrageous!

@Jayiyagi Жыл бұрын

if you liked the 2td-x, the Typons are at a whole new level. It is not a subtle difference and I believe both me and css team believes so as they've stated in the video "the best speaker they have ever been involved with"

@2madamimadam290 Жыл бұрын

Jay, now that these shipped and I've had two evenings with the Typhons, I must concur. "New level". They really disappear and the realism is just spooky. They work better in my small untreated room better than the 2TD-X. No boominess, cleaner midbass, but they go really deep when called upon and have firm grip on kick drums etc Great soundstage. Congrats, they are fantastic!

@williammorales8204 Жыл бұрын

Sounds exciting, guess we will wait for the reviews, unless we can get to a show.

@glenncornwall4331 Жыл бұрын

From what I’ve seen of the competition searches like legacy audio at this price point.It reminds me of but not really, but just whats involved here that speaker should be going between eight and $10,000 .what an absolute bargain😊

@damianzaninovich4900 Жыл бұрын

That’s was fantastic. A painted matte finish would be my preference.

@Jayiyagi Жыл бұрын

due to the cost of having different finishes, we went with matt black and high quality veneer. You are free to finish them however you like. I have a friend that is looking to take these to a friend's auto shop to paint em into a car finish to match his car !

@damianzaninovich4900 Жыл бұрын

My basketball backboard has an automotive finish a guy who works on our farm applied to match my house. It looks like new after many years and much better than the paint on the house. I know who cares, haha. Great video from all of you!

@stephencosta6814 Жыл бұрын

It’s about time you come up with something like this your opinion and review of something is extremely important to us on your channel. We rely on your judgment 100%. I’ve bought many products because of you your reviews and I’m extremely happy with them as a result.🎉🎉🎉❤❤❤

@leo11877 Жыл бұрын

This is a great idea for a new reality tv show. "DIY Speaker Wars"

@jkim4712 Жыл бұрын

Cap differences and preferences are usually dependent on your equipment rooms and etc. There is no clear one best cap for all speakers. You could even mix and match different sound caps to make sound you like.

@tallpaull9367 Жыл бұрын

It would also be very interesting to sell with an Active Crossover

@TheDanEdwards Жыл бұрын

Two different concepts: 1) axial alignment (e.g., directivity of high frequencies) and 2) time alignment. Some speaker designs will accomodate both, but time alignment is an idea that is pushed without much support, I offer. For both concepts even the smallest movement of a person's head makes all the difference in the world, and almost no one sits with their head in vise. What this speaker does is simply point the hf more towards the person's head.

@frankfleischman7285 Жыл бұрын

Sensational video in many ways. Engaging and informative and gives you a peak behind the development process. I love my 1TDX w upgrades and very interested in these for another room. Two questions 1- how close to wall is optimal? 2-what Sonus Faber speaker would you say they sound closest to? I’m almost ready to put deposit down

@Jayiyagi Жыл бұрын

1. They are fine close to wall boundaries. The video manual that I produced for these speakers will be sent to owners when they get the speaker for optimal set up in many different scenarios. 2. Electa amator and amati tradition was my inspirations

@rvaillant Жыл бұрын

The problem with designing the upper portion as a 2 way monitor is that you give up sensitivity vs using a true midrange driver. I have to say they do look nice and great that you went all in on parts choice.

@Jayiyagi Жыл бұрын

midrange and woofers are identical quality and paper. It was important to match the tonality as well as capability of the drivers to integrate flawlessly between different cabinets and frequencies.

@rvaillant Жыл бұрын

@@Jayiyagi I agree with that approach, plus offers the same polar pattern. Anyway, great job. So is this a kit, or fully built, and is the 5500.00 Cad or US. Thanks

@roberthart9886 Жыл бұрын

External/Outboard XOs solve the problem for people who don't mind the extra $$$$ for the Duelands... PLUS ...that eliminates cabinet resonances that often negatively affect the XO

@anthonymaerin4052 Жыл бұрын

Use poly caps and bi pass with small value deuland caps it works a treat

@mpp9964 Жыл бұрын

These guys are hilarious. Nice departure from typical channel content

@ufarkingicehole Жыл бұрын

I really want to hear these. They are priced just right assuming they sound half as good as you guys described.

@rvickner Жыл бұрын

love it

@roccobruno8027 Жыл бұрын

I hope moving forward CSS makes designs using an AMT or Ribbon tweeter. To get a speaker of this sound quality and build quality is definitely no mean feat.

@Jayiyagi Жыл бұрын

certainly something consider perhaps in the future for them. I do like AMT tweeters.

@davekallerae5672 Жыл бұрын

Yes. The original designer had some.

@hoth2112 Жыл бұрын

I'd be curious to try Miflex caps over the Jupiter caps, I'd imagine they would be similar to Jupiter but with a little more "snap" and adding a small high-quality bypass cap will help to improve the focus. (In my experience, at least)

@Jayiyagi Жыл бұрын

I have actually tried Miflex caps on my own time with a control group of friends and we found that it was smoothing things too much on my speakers much like the jupiter caps but slightly more. We may try jupiter caps with miflex bypass caps for future upgrades amongst other options for upgraded crossover options we will make available to owners. We want the upgrade to be an actual upgrade that brings a big difference

@hoth2112 Жыл бұрын

@@Jayiyagi interesting, I would also consider trying the Miflex/Jupiter with a 0.1uF Z-Cap bypass to improve focus. But from my experience, I know it's definitely tough to really see a big improvement, especially once you already have high-end caps, many times it's more "different" than "better," and will really depend on the tastes of the end user. Another option may be upgrading the primary resistors to something like Mills, and then upgrading the mid and tweeter coils to foil inductors.

@trito408 Жыл бұрын

They look like awesome speakers Jay. I might pick them up if you create a center channel. Also have you guys tried putting in a rear facing speaker? I noticed a lot of high end speakers are adding them to improve depth and space.

@enlitenaudio6517 Жыл бұрын

Jay, the time alignment is more important between tweeter and midbass (vocals, imaging, etc) than midbass to lowbass @ 200Hz. Try it by pulling the tweeter and move it forward and rearward from the baffle plane. It would have been cooler if you brought this idea out to your audience for their ideas in addition to yours.

@Jayiyagi Жыл бұрын

The time alignment is for the tweeter and midrange. Flexible time alignment "between" tweeter and midrange is something you get in flagship wilson designs and would have required this speaker to be 3 boxes per channel or more, which would have increased price and complexity to another level on this project. Perhaps another day :)

@enlitenaudio6517 Жыл бұрын

@@Jayiyagi Nah man, it's not that hard. Just try the test for yourself and then we should talk...

@f430ferrari5 Жыл бұрын

@@Jayiyagi we all know this was all “pre-planned” out. It’s the Version 2 in the making. 😉👍

@Justwantahover 6 ай бұрын

39:22 Cheap drivers can sound really good but what you tend to not get is efficiency and power handling.

@FOH3663 Жыл бұрын

This is a sensational partnership.

@cpaint69 Жыл бұрын

Same result from my own testing, Jantzen Superior Z-cap is the one I love most compared to the other similar priced or slightly more expansive capacitors I have tried. From your temporary crossover seen in the video, it seems the Jantzen Superior Z-cap (or any of those expansive capacitors) is not tested in the woofer circuit. Not sure how much it is going to increase the cost, the Jantzen Superior Z-cap definitely makes the bass deeper and tighter. Btw for those Clarity Cap, from my personal experience, they need plenty of run in time to get the best out of it.

@thirdkey9 Жыл бұрын

Best on the mission and hoped it could have stayed under 3500 but, that seemed lofty considering the start point and quality/cost ratio aspects. Perhaps a bookshelf down the line and look forward to audience feedback.

@gino3286 Жыл бұрын

Hi thank you very much for your the exceptional project and outcome I love the sat plus sub approach and i honestly wonder why it is not more popular However small woofers on bass i don't like Considering that the bass unit has to cover the range up to 200Hz any great quality big diameter woofer could be used Even a 15" unit that could provide higher spls with lower distortion And i still prefer just a single driver solution Kind regards gino

@matytinman Жыл бұрын

One possibility is to use a Miflex as bypass with Jantzen Z in the tweeter components. I have a Miflex KPCU01H322J - Copper Foil Paper 0,022uF 600VDC 5% in my very modded KEF Q100. The improvement was huge, incredible.

@Jayiyagi Жыл бұрын

Jantzen seemed to be a very fast cap nor was it a HUGE cap in comparison to other caps we have tried that tended to smear the image a bit with advantages in the sound staging. We didn't feel the need to use a bypass cap but we may consider it if we are using bigger caps for future upgraded crossovers that owners can swap out

@matytinman Жыл бұрын

Off course, first with Jantzen Z-Superior Cap. But it would be necessary to do the test with Miflex KPCU to know how close it is to the Duelund CAST Cu-Sn Loudspeaker Capacitor 100VDC - 2% tolerance

@MaxiMe-et4zs Жыл бұрын

Duelund also has a polypropylene version much much more affordable but no idea how good it is.

@kl9941 Жыл бұрын

Just a suggestion for such a nice looking, reasonably price, speaker project. I find the "CSS" plate at the bottom as being way to bold and draws attention to itself. And perhaps even your name plate Jay can be reduced to your initials without the diamond. Or maybe put it on the back. I can imagine how proud you are yet you don't want excess visual stimuli taking away from the sound you worked so hard to create with the CSS team. Good luck with your endeavor. I am actually looking to purchase a second set of speakers and will put this on my possibility list.

@williammilligan1451 Жыл бұрын

Kudos on taking your knowledge and emotional love of music to the next level…Curious as to whether you tried your Thallo on these babies…I have the Thallo thanks to you…Wonder how long the buy list will be, as I’m considering!

@bruceandt Жыл бұрын

The build and thinking uses the knowledge of past practice in this build. Take years and years to listen and compare so many speakers. This build is the culmination of alignment and sonic performance. Cabinet build is always the money you pay. . This is a blend of cabinet cost and robust drivers dampened in a bottom cabinet. The head unit must perfectly shine and play in absolute synchronization in alignment. Perfect rendering with some off axis response. This should be a true Goliath